Diaphragm

GG D52966

HUSKY PUMP, 515P-PP01AP3PPSPSPPT0

Husky 515 PP 1/2 in NPT Standard Pump, PP Center Section, PP Seats, SP Balls & SP Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.No mechanical seals to cause fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingDelivery up to 15 gpm (56.7 lpm)Easy-to-service air valve and ball checksReliable air valve for years of dependable performance

GG 233500

TRITON PUMP, DIAPHRAGM, 1:1 ALUMINUM

Triton Air-Operated Diaphragm Pump, Bare, Aluminum, NPT

Effective alternative to traditional pressure pots and standard diaphragm pumps

Double diaphragm pump designed specifically for finishing applicationsLow pulsation output provides smooth pump changeoverLow shear design for minimal degradation of shear sensitive materialsRugged aluminum and stainless steel construction handles a wide variety of fluids

GG D52911

HUSKY PUMP, 515P-PP01AP3PPPTPTPT0

Husky 515 PP 1/2 in NPT Standard Pump, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.No mechanical seals to cause fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingDelivery up to 15 gpm (56.7 lpm)Easy-to-service air valve and ball checksReliable air valve for years of dependable performance

GG D51211

HUSKY PUMP, 515AC-PP01AAC3ACPTPTPT0

Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, AC Seats, PTFE Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.No mechanical seals to cause fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingDelivery up to 15 gpm (56.7 lpm)Easy-to-service air valve and ball checksReliable air valve for years of dependable performance

GG 647028

HUSKY PUMP, 1050A-PA01AA1SSPTPTPT

Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040

GG D54311

HUSKY PUMP, 716S-PP01AS1SSPTPTPT0

Husky 716 SS Air Operated Double Diaphragm Metal Pump

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-portingNo mechanical seals which causes fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks3/4 in (19.05 mm) center- and end-portingNo seals to leak or failQuiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks

GG 233501

TRITON PUMP, DIAPHRAGM, 1:1 SST

Triton Air-Operated Diaphragm Pump, Bare, SST, NPT

Effective alternative to traditional pressure pots and standard diaphragm pumps

Double diaphragm pump designed specifically for finishing applicationsLow pulsation output provides smooth pump changeoverLow shear design for minimal degradation of shear sensitive materialsRugged aluminum and stainless steel construction handles a wide variety of fluids

GG D51311

HUSKY PUMP, 515AC-PP01AAC3SSPTPTPT0

Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.No mechanical seals to cause fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingDelivery up to 15 gpm (56.7 lpm)Easy-to-service air valve and ball checksReliable air valve for years of dependable performance

GG 651009

HUSKY PUMP, 1050S-A01AS1SSPTPTPT

Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040

GG D31211

HUSKY PUMP, 307AC-PP01AAC3ACPTPTPT

Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, AC Seats, PTFE Balls & PTFE Diaphragm

The Husky 307 air-operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.

Typical applications include oil transfer and evacuation, fuel dispense and transfer, windshield wash solution dispense, and water and anti-freeze dispense. Some models UL-approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil and lubricating oil.Quick and easy assembly and disassembly designEasy to service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingEvery pump is tested prior to shipping3/8 in (9.52 mm) end portingDelivery up to 7 gpm (26.5 lpm)Easy-to-service air valve and ball checks

GG D51331

HUSKY PUMP, 515AC-PP01AAC3SSSSPTPT0

Husky 515 AC 1/2 in NPT Standard Pump, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.No mechanical seals to cause fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingDelivery up to 15 gpm (56.7 lpm)Easy-to-service air valve and ball checksReliable air valve for years of dependable performance

GG D12091

HUSKY PUMP, 205P-PP01AP5--PPPTPT-FK

Husky 205 PP AODD Plastic Pump, PP/PT/PT-FKM

Our Husky air-operated double diaphragm pumps are loaded with features to help you get the job done right, every time, and are built to save you money.

The Husky 205 air-operated diaphragm pump features spring check valves for superior priming in any mounting configuration.True-formed PTFE and Santoprene diaphragms for enhanced performanceSpring loaded checks allow the diaphragm pump to work in any orientationInlet and Outlet are interchangeableRemote control option using an external controller1/4-in (6.35 mm) end-porting double diaphragm pump

GG DF3525

HUSKY PUMP, 2150A-PA01AA1TPACTP

Husky 2150 AL Air Operated Double Diaphragm Metal Pump, TPE/AC

The Husky 2150 air operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

Overall improved efficiency (up to 40% more efficient)Highest fluid flow rate in its classUp to 5 times longer diaphragm life compared to other air operated diaphragm pumpsExpanded material offering to handle endless applicationsFewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump2 in. (51 mm) ANSI end-portingFluid flow up to 150 gpm (568 lpm)Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)Lube-free operationEpoxy-coated air section for tough environmental conditionsAvailable in aluminum, 316 stainless steel, ductile iron and polypropylene

GG D31331

HUSKY PUMP, 307AC-PP01AAC3SSSSPTPT

Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 307 air-operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.

Typical applications include oil transfer and evacuation, fuel dispense and transfer, windshield wash solution dispense, and water and anti-freeze dispense. Some models UL-approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil and lubricating oil.Quick and easy assembly and disassembly designEasy to service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingEvery pump is tested prior to shipping3/8 in (9.52 mm) end portingDelivery up to 7 gpm (26.5 lpm)Easy-to-service air valve and ball checks

GG 26C092

Husky Pump, 515Ac-Pp01Aac3Ssssptpt-Fk

GG 647018

HUSKY PUMP, 1050A-PA01AA1SSSSPTPT

Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040

GG D12096

HUSKY PUMP, 205P-PP01AP5--PPSPPT-FK

Husky 205 PP Pump, PP Center Section, PP Balls & SP Diaphragm

Our Husky air-operated double diaphragm pumps are loaded with features to help you get the job done right, every time, and are built to save you money.

The Husky 205 air-operated diaphragm pump features spring check valves for superior priming in any mounting configuration.True-formed PTFE and Santoprene diaphragms for enhanced performanceSpring loaded checks allow the diaphragm pump to work in any orientationInlet and Outlet are interchangeableRemote control option using an external controller1/4-in (6.35 mm) end-porting double diaphragm pump

GG D31255

HUSKY PUMP, 307AC-PP01AAC3ACTPTPPT

Husky 307 AC 3/8 in. (9.52 mm) NPT Standard Pump, PP Center Section, AC Seats, TPE Balls & TPE Diaphragm

The Husky 307 air-operated diaphragm pump features a stall-free low pulsation air valve that provides a smooth and rapid changeover.

Typical applications include oil transfer and evacuation, fuel dispense and transfer, windshield wash solution dispense, and water and anti-freeze dispense. Some models UL-approved for use in pumping gasoline and gasoline/alcohol blends up to 10% ethanol, diesel fuel, fuel oil and lubricating oil.Quick and easy assembly and disassembly designEasy to service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingEvery pump is tested prior to shipping3/8 in (9.52 mm) end portingDelivery up to 7 gpm (26.5 lpm)Easy-to-service air valve and ball checks

GG D53211

HUSKY PUMP, 716A-PP01AA1ACPTPTPT0

Husky 716 AL Air Operated Double Diaphragm Metal Pump with NPT Standard Air Valve, AC Seat, PTFE Ball, & PTFE Diaphragm

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-portingNo mechanical seals which causes fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks3/4 in (19.05 mm) center- and end-portingNo seals to leak or failQuiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks

GG D53331

HUSKY PUMP, 716A-PP01AA1SSSSPTPT0

Husky 716 AL Air Operated Double Diaphragm Metal Pump with NPT Standard Air Valve, SS Seat, SS Ball, & PTFE Diaphragm

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

Center- and end-portingNo mechanical seals which causes fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks3/4 in (19.05 mm) center- and end-portingNo seals to leak or failQuiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checks

GG D55A11

HUSKY PUMP, 515F-PP01AF3PVPTPTPT0

Husky 515 PVDF 1/2 in NPT Standard Pump, PP Center Section, PVDF Seats, PTFE Balls & PTFE Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

Center and end porting options.No mechanical seals to cause fluid leaks or failuresRuns quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levelsEasy-to-service air valve and ball checksOperates on as little as 20 psi (1.4 bar, 0.14 MPa)Split manifold option to pump multiple fluids without mixingDelivery up to 15 gpm (56.7 lpm)Easy-to-service air valve and ball checksReliable air valve for years of dependable performance

GG 647666

HUSKY PUMP, 1050A-PA01AA1TPACTP

Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, TPE Seats, AC Balls & TPE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040

BB 41-818831

1/2" Acetal Diaphragm Pump (Short Stroke)

GG 649034

HUSKY PUMP, 1050P-PP01AP2PPPTPTPT

Husky 1050 PP (NPT) Pump, End Flange, PP Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040

GG 651000

HUSKY PUMP, 1050S-PA01AS1SSSSPTPT

Husky 1050 SS 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life

• Up to 5x longer diaphragm life for less maintenance and downtime

Modular Air Valve

• Stall-free, low pulsation operation provides smooth and rapid changeover

One-Piece Center Section

• Eliminates air leaks for more efficient operation

Four Bolt Joint Design

• Bolted design provides even sealing pressure for leak-free operation

Multiple Ports

• Increased number of ports for installation flexibility

Optional Features

• DataTrakâ„¢ - Runaway protection and tracks material usage
• Pulse Output - Cycle count capability

Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation30% more efficient than the market leader20% increase in fluid flow compared to the Husky 1040