DYNABRADE INC. S12699

DY RB1

1 hp, 5/8in -11 Spindle, 2,800 RPM

Dynabrade Nitro Series buffers polish large areas like hoods and trunk lids quickly and with consistent results.

2,800 RPM free speed. Accepts 5in to 8in diameter buffing pads. Lightweight and compact in size

DY 79485

150 Grit Fine, 5/8in -11 Female Thread

Dynabrite finishing flap rolls and wheels are an ideal choice for a broad range blending and finishing aplications in metal fabrication

Less conformable than 100% non woven flap rolls and flap wheels, the alternating flaps of non woven and coated abrasive cloth provide a more aggressive cutting action for stock removal and finishing in one step

• Max. RPM: 5000.0

DY 92918

1/4in (6 mm) Shank, For 2in (51 mm) Diameter x 2in (51 mm) W Band

DY 01026

DY 01578

DY 01604

DY 01722

DY 01746

DY 01890

DY 02376

DY 02377

DY 02599

DY 04014

DY 04066

DY 04102

DY 05029

DY 05039

DY 07169

DY 10209

Vacuum Kit w/X61VHS's and Standard Cart, M-Class, 120v/60Hz, 15 Amp, 20 gal., Conductive

DY 11254

For 1/4in (6 mm) W to 1/2in (13 mm) W x 34in (864 mm) L Belts

DY 11332

Contact Wheel Assembly, 1/4in Diameter x 3/8in W x 3/16in I.D., Crown Face, Steel

DY 11352

DY 11894

DY 11902

DY 13074

DY 13060

DY 13402

DY 13501BK

1 hp, Straight-Line, 1,800 RPM, Rear Exhaust

• Motor RPM: 1800

DY 15331

DY 31921

DY 40757

DY 40605

DY 48500

.4 hp, 25,000 RPM, Gearless, Extended Rear Exhaust, Locking-Type Female Pad

Includes 51348 Locking-Type Pad (2in diameter).

Handle is offset 7 degree for greater operator comfort and control. Gearless for reduced maintenance and down-time.

• HP: 0.4
• Max. RPM: 25000.0
• Motor RPM: 25,000

DY 50011

DY 50412

DY 50471

DY 50607

1/2in (13 mm) Thickness Rubber, Medium Density, 5/16in -24 Male Thread

DY 50887

DY 50938

DY 50951

DY 51785

DY 51921

DY 51923

DY 51934

DY 51936

DY 51955

DY 51982

DY 52218

20,000 RPM, Gearless, Front Exhaust, Long Shank, 1/4in and 6mm Collets

High-Quality Air-powered Die Grinder 7 Degree Offset, Short Shank, Gearless

Gearless for reduced maintenance and downtime.

• HP: 0.5
• Max. RPM: 20000.0
• Motor RPM: 20000

DY 52418

.7 hp, 20,000 RPM, Rear Exhaust, 3/8in Collet

Our Air Powered, 3in (76 mm) Diameter, Straight-Line, Flush Cut-Off Wheel Tool is ideal for Central Vacuum Systems. The unique shroud and Flange design adds versatility. This too has plenty of power, .7 hp, 20,000 RPM, Rear Exhaust.

Accepts optional 3in (76 mm) diameter Diamond Cut-Off Wheels with 3/8in (10 mm) diameter mandrel. Unique cutaway shroud design allows 1in (25 mm) wheel depth exposure. Non-marring plastic flange protects work surface while cutting. Includes 94300 Composite Dynaswivel, enhancing operator comfort and control.

• HP: 0.7
• Max. RPM: 20000.0
• Motor RPM: 20,000

DY 52630BK

1.3 hp, 13,500 RPM, Rotational Exhaust, 3/8in -24 Spindle Thread

• Motor RPM: 13,200

DY 52835

.4 hp, 5,500 RPM, Pistol-Grip, Geared, Rear Exhaust, DynaChuck

.4 hp (298 W) Pistol Grip Drill offered in ergonomic Dynabrade design, with comfortable textured tactile grip. Powerful high-torque, geared air motor is ideal for countless industrial applications.

Finger platform on both sides of tool allows increased stability and comfort.

• HP: 0.4
• Max. RPM: 5500.0
• Motor RPM: 5,500

DY 52924

DY 53183

DY 53207

DY 53278

DY 53570

DY 53600

DY 53603

DY 53608

DY 53606

DY 53611

DY 53635

DY 53637

DY 53639

DY 53649

DY 53666

DY 55021

DY 56022

DY 56474

DY 57371

DY 57429

DY 57962

DY 58013

DY 58022

The premium self skinning urethane foam provide optimum support and flexibility for the widest range of sanding applications with coarse to ultra fine grit abrasives.

3/8in (10 mm) thick, medium density pads. Pads mount with four screws.

DY 58358

DY 59371

DY 61169

DY 61430

10 Gal. (38 L), 20 A, 120 V/60 Hz, Division II, N. America

Electric Portable Vacuum for use on non-metallic surfaces such as wood and plastics. Designed for general source capture and cleanup. Powerful suction is ideal for dry-only industrial applications. Bypass Motor System uses clean air to cool the motor and extend vacuum life. Includes HEPA H14 Filter with 99.995% efficiency on 0.3 micron. Two additional HEPA Filters included within power-head, making it eligible for IP6X.

Top-quality stainless steel body and 10 gallon (38 liter) recovery tank. Unit is static-dissipating (kit included) and conductive. Aerosol leak tested for quality assurance. Equipped with easy-glide cart. Also connects to optional 61483 Cart. Dust Ignition Protected

• HP: 1200.0

DY 61621

DY 62342

DY 62778

TV 212232SD

DY 64210

230 V, 3 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 36in (91 cm) W x 72in (183 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes three filters.

• HP: 1.0

DY 64209

230 V, 3 Phase, 60 Hz

Eliminate airborne dust and contaminants while sanding. Working Area of 33in (84 cm) W x 60in (152 cm) L.

Ideal for use with vacuum-ready or non-vacuum tools. Dual filtration - accepts 1-micron pleated paper filters: 20in (508 mm) W x 25in (635 mm) L. Includes two filters.

• HP: 1.0

DY 64401

460 V (AC), 3 Phase, 60 Hz, Down Exhaust

Meets These NFPA Requirements: Interlock Pneumatic Valve with Blower and Time-Delay. Tools operate only when Downdraft Table is running. Class II, Group E Explosion-Proof Motor. Aluminum Top for Non-Spark Work Surface. Non-Spark Aluminum Blower on Collector?s Clean-Air Side. Automatic Water Level Control. Vented Sump (Main Tank). Low Voltage Control. Lockable Fused Power Disconnect

Ideal for capturing aluminum and titanium dust. Working area of 36in wide x 60in long accommodates large work pieces. Includes casters for easy maneuvering. casters also lock securely into place.

• HP: 3.0

DY 64403

460 V (AC), 3 Phase, 60 Hz, Up Exhaust

Meets These NFPA Requirements: Interlock Pneumatic Valve with Blower and Time-Delay. Tools operate only when Downdraft Table is running. Class II, Group E Explosion-Proof Motor. Aluminum Top for Non-Spark Work Surface. Non-Spark Aluminum Blower on Collector?s Clean-Air Side. Automatic Water Level Control. Vented Sump (Main Tank). Low Voltage Control. Lockable Fused Power Disconnect

Ideal for capturing aluminum and titanium dust. Working area of 36in wide x 60in long accommodates large work pieces. Includes casters for easy maneuvering. casters also lock securely into place.

• HP: 3.0

DY 64855

DY 66710

DY 66435

DY 69482

DY 69483

DY 78103

A premium ceramic high performance mineral that is sharp, hard and tough.

The best choice for high heat and high grinding pressure applications that is also effective on many materials at lower grinding pressures.

DY 78192

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78193

Premium Fepa graded aluminum oxide abrasive offers self sharpening characteristics that provide consistent performance and cut rate on a wide variety of materials and applications

Durable X-weight backing is tough yet flexible for good performance in all disc applications

DY 78416

2-dimensional open structure non woven surface conditioning material coated throughout with aluminum oxide abrasive

produces long life and consistent finishes on ferrous and non ferrous metals

DY 78687

DY 79030

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79038

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79039

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79041

A good high performance mineral that is sharp, hard and tough. It is a versatile mineral that works well under high heat and grinding pressure applications but can also be effective on many materials at lower grinding pressure levels.

Metalwork finishing on stainless steel and nickel alloys, forged steel and aluminum components

DY 79104

The self-sharpening design is ideal for high pressure, heavy metal removal applications. Cuts cooler and lasts 50% to 200% longer than current generation of belts. Lower your total grinding costs on hard to grind materials.

Grinding, light grinding and coatings removal on stainless steel, carbon steel, titanium, nickel alloy, chrome and inconel.