ENERPAC S100272

EP ZU4208BB-Q

EP DA15066

EP RRH2308

EP P39

EP 1000S003

EP RD2510K2

EP RC50K71

EP IPA1220

EP ZU4208TI-Q

EP CA86290

EP Y845446

EP CB131101

EP Y4045

EP DA3041900SR

EP Y990028

EP CB45305

EP Y918060

EP CA55446

EP CA364051

EP CA364051

EP CA298900SR

EP Y13028

EP C960900SR

EP GBJ100

EP DA5493900SR

EP P80K50

EP CA237950SR

EP 68855E

EP LWB1

• Type: Service Kit

EP P842

Enerpac lightweight hydraulic hand pumps are a convenient alternative to heavier steel pumps without any sacrifice in performance or safety. Each model is rated up to 10,000 psi (700 bar).

The durable glass-filled nylon reservoir and nylon encapsulated aluminum pump base offers an unrivalled combination of strength, weight, and resistance to corrosion.

Lightweight single-speed hydraulic hand pumps offer the simplicity needed for a wide range of industrial applications. The 2-stage hydraulic models reduce the number of handle strokes by as much as 78% compared to a single speed pump. This is ideal when you want to advance a tool such as a cylinder to the point of load contact. High flow is delivered when it's needed most before the pump automatically switches to the low flow high-pressure stage.

With a choice of oil capacities up to 453 in3 (7423 cm3), we're certain you'll find a lightweight hydraulic hand pump to handle multiple cylinder hook-ups. For compatibility with double-acting tools choose the P842.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: P
• SubTypes: Hand Pump - Two Speed

• Lightweight and compact design
• Durable glass-filled nylon reservoir and nylon encapsulated aluminum pump base for maximum corrosion resistance
• Two-speed operation on most models reduces handle strokes by as much as 78% over single speed pumps
• Lower handle effort to minimize operator fatigue
• Handle lock and lightweight construction for easy carrying
• Large oil capacities to power a wide range of cylinders or tools
• Non-conductive fiberglass handle for operator safety
• Internal pressure relief valve for overload protection

• Spare Part(s): P842K50

EP RC10K32

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Spring Kit

EP XC-1201MB

EP XLK1

• Type: Pump Accessory

• Product Group: Pumps
• Product Line: Industrial Tools
• SubTypes: Joy Stick Lever Kit

EP ZPS-E3

EP ZPT-U4

EP 11100

Enerpac ultra-high-pressure, hydraulic hand pumps are offered as single-stage or 2 stage manual pumps that can handle up to 40,000 psi (2800 bar). Typical industrial applications include lifting, testing, calibration, maintenance, and repair.

The P2282 model provides two speed operation to reduce the number of handle strokes and is lighter than steel equivalents. The two-speed operation requires up to 78% fewer handle strokes than single-speed hydraulic hand pumps, and the handle locks into place for secure transport.

The single-speed models, 11100 and 11400, are built using 303 Stainless steel construction. Ideal for use with many different fluids, such as distilled water, alcohol, diesters, silicones, soluble oils and petroleum. The 11100 model is rated up to 10,000 psi (700 bar) and the 11400 model is rated up to 40,000 psi (2800 bar)

Both the single-speed and the two-speed models have a large release knob for improved control of pressure release.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: 11
• SubTypes: Hand Pump - Single Speed

• 303 Stainless steel construction enable use with many different fluids, such as distilled water, alcohol, diesters, silicones, soluble oils and petroleum
• Large release knob for improved control of pressure release
• Outlet ports are 3/4" -16 cone for 40,000 psi rating

• Spare Part(s): 11000KU, F473900SR, SPL3289S2
• Accessories: 4.11464116641246E+89

EP 1640016-01

• Type: Spreader Accessory

• Product Group: Flange Maintenance Tools
• Product Line: Industrial Tools, Bolting Tools
• SubTypes: Stepped Block

Set Includes
• 2 x SWi5TE Step Block
• 2 x M6 CSK Hex Screw
• 2 x Retaining Washer
• 1 x SWi5TE Large Safety Block
• 2 x 4mm Allen Key

EP 41979E

EP 42412E

EP 45970E

EP B1320028

• Type: Service Kit

• SubTypes: Repair Part

EP BHR16A

EP BHR32A

EP BHY32A

EP CB108005SR

• Type: ERP

• SubTypes: Repair Part

EP CR355167

• Type: Service Kit

• SubTypes: Gasket

EP CR83044

• Type: Service Kit

• SubTypes: Stop Ring

EP CST27151

• Type: Hydraulic Cylinders
• Max PSI: 5000

• Product Group: Cylinders and Jacks
• Product Line: Work Holding Tools
• Series: CST
• Stroke Inches: 0.59
• SubTypes: Workholding Threaded Cylinder

• Minimum cylinder diameter combined with maximized clamping forces
• Threaded body allows fine positioning and easy installation
• Internal plunger wipers allow maintenance-free, high-cycle performance
• Center-tapped plungers will hold workpiece contact buttons
• Single-acting models with spring return simplify hydraulic tubing requirements
• Double-acting models are recommended for high-cycle applications

• Accessories: MF421, FN421, BS91

EP DA11433900SR

EP DA11539380

• Type: Service Kit

• SubTypes: Repair Part

EP DA11540380

• Type: Service Kit

• SubTypes: Plug

EP DA3776006

• Type: Service Kit

• SubTypes: Repair Part

EP DD1190950SR

• Type: ERP

• SubTypes: Repair Part

EP DD2668380

• Type: ERP

• SubTypes: Repair Part

EP DD2687900SR

• Type: Service Kit

• SubTypes: Pendant

EP EBH544K

• Type: Pump Accessory

• Product Group: Pumps
• Product Line: Industrial Tools, Bolting Tools
• Series: SC/XC2 Accessory
• SubTypes: Battery

EP ECCE3201K

• Type: Cutter Accessory

• Product Group: Cutters
• Product Line: Industrial Tools
• Series: ECCE Accessory
• SubTypes: Replacement Blade

EP H7206

H700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.

Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.

Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.

A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.

• Type: Hose
• Max Bar: 700
• Max PSI: 10000

• Product Group: Hoses, Pumps
• Product Line: Industrial Tools
• Series: H700
• SubTypes: Thermo-plastic Hose

• For demanding applications, featuring a 4:1 safety factor
• Maximum working pressure of 10,000 psi
• Outside jacket is polyurethane, to provide maximum abrasion resistance
• Exhibits low volumetric expansion under pressure to enhance overall system efficiency
• Vinyl strain relief guard on both ends of hose to improve life and durability on all models.

EP JH1006

EP LW16

Choose the LW-Series Vertical Lifting Wedge when you need to lift and lower heavy loads of up to 16-tons with a stable motion without slippage. A minimum insertion gap of 0.39" (10 mm) is needed which expands up to 2.02" (51.5 mm). Retraction force is supplied by the single-acting spring return cylinder. The maximum operating pressure is (10000 psi 700 bar).

The included SB2 stepped safety block provides reassuring support, and can also be used to increase the lifting height to 2.72" (69 mm). The LWB1 is a larger stepped block available as an option.

A compatible hydraulic pump is needed to operate the LW16. The Enerpac P392 Hand Pump, or the P392FP Foot Pump are ideal.

Alternatively, choose the LWC16 Vertical Lifting Wedge, which includes an integrated hand pump.

• Type: Spreader
• Max Bar: 700
• Max PSI: 10000

• Product Group: Flange Maintenance Tools
• Product Line: Industrial Tools
• Series: LW
• Stroke Inches: 0.83
• Stroke MM: 21
• SubTypes: Lifting Wedge

• Capacity Imperial Tons: 16
• Capacity KN: 157

EP RACH3010

RACH-Series Hollow Plunger Hydraulic Cylinders (sometimes called center-hole cylinders) feature a hollow plunger with an internal thread to allow fixing to the component to be pulled. This makes them the ideal choice for when you need a lighter, more portable cylinder for applications such as tensioning, testing, pulling, and lifting. Each RACH Cylinder is rated for up to 10,000 psi (700 bar) and compliant with ASME B30.1.

Each RACH Cylinder is single-acting and uses a high-strength return spring for rapid retraction. All are equipped with bolt-on hardened steel saddles and a steel base plate for increased durability.

Aluminum is not only lightweight, but also inherently less corrosive than steel, which makes it a great material for use in many caustic environments. For enhanced protection, RACH Aluminum Cylinders are finished with an anodized hard coat finish to resist damage and extend cylinder life.

• Type: Hydraulic Cylinders
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• Series: RACH
• Stroke Inches: 9.84
• Stroke MM: 250
• SubTypes: Aluminum Hollow Plunger Cylinder

• Hollow plunger design allows for both pull and push forces
• Composite bearings increase cylinder life and side load resistance
• Hard coat finish on all surfaces resists damage and extends cylinder life
• Handles included on all models
• Floating center tube increases seal life
• Steel baseplate and saddle for protection against load-induced damage
• Integral stop ring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
• High-strength return spring for rapid cylinder retraction
• CR400 coupler and dustcap included on all models
• All cylinders meet ASME B-30.1 standards

EP RC426K

• Type: Service Kit

• SubTypes: Repair Part

EP RC5K33

• Type: Service Kit

• Product Group: Cylinders and Jacks
• Product Line: Industrial Tools
• SubTypes: Spring Kit

EP SCH202H

A hydraulic cylinder and pump set (porta power) provides a quick and easy way to get everything you need for a wide range of pulling, lifting, and pushing applications.

Included in this kit is an RCH single-acting hollow hydraulic cylinder. The hollow bore design of the cylinder includes collar threads for easy fixturing. RCH models over 20 tons (218 kN) include a nickel-plated floating center tube to reduce side load damage and to increase product life. Provided with the cylinder is a two-speed pump, a 6-foot hose, a calibrated gauge, and a gauge adaptor.

Configure your ideal kit by choosing from a range of 12 - 100 Ton (125 - 933 kN) cylinders to suit your application. Your hydraulic pump can be selected from a wide choice of manual, air, or cordless options.

• Type: Cylinder And PumpSet
• Max Bar: 700
• Max PSI: 10000

• Product Group: Cylinders and Jacks, Pumps
• Product Line: Industrial Tools
• Series: SCH
• Stroke Inches: 2
• Stroke MM: 49
• SubTypes: Cylinder and Hand Pump Set

• Set Includes: P392, RCH202, HC7206, GF813P, GA3

EP SLRS201

• Type: Work Holding Clamp
• Max PSI: 5000
• Min PSI: 500

• Product Group: Workholding Tools
• Product Line: Work Holding Tools
• Series: SLR
• Stroke Inches: 1.16
• SubTypes: Swing Clamp - Lower Flange

• Flexible design allows for manifold or threaded port connection
• No fixture hole preparation required
• Easiest mounting preparation in the swing cylinder line
• Symmetrical rectangular flange design enables clamping at three sides of the cylinder
• Allows extra large parts to be clamped
• 30, 45 and 60 degree swing angles available on request
• Enerpac lower flange series swing clamps can be bolted to the fixture, allowing easy installation of the unit and does not require machined fixture holes. Hydraulic connections are made through SAE or BSPP oil connection or the standard integrated O-ring ports.

EP W2107X

W-Series Low Profile Hexagon Cassettes work with your compatible drive unit, giving you the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All W-Series X-edition cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

Robustly constructed from steel especially for heavy use and enduring durability, these robust cassettes are designed to ensure a low total cost of ownership. Fast release in the compatible drive units enable rapid exchange of cassettes - no tools required and no pins to lose!

The optimum nose radius in each cassette offers the ideal strength to size ratio for restricted clearance applications. (For exceptionally tight spaces consider the UltraSlim Cassettes).

Constant torque output provides accuracy of plus/minus 3% across full stroke.

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: W - Cassette
• SubTypes: Cassette - Imperial or Metric

• Accessories: W2107R102, WTE20, WRP20

EP W2113X

W-Series Low Profile Hexagon Cassettes work with your compatible drive unit, giving you the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All W-Series X-edition cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

Robustly constructed from steel especially for heavy use and enduring durability, these robust cassettes are designed to ensure a low total cost of ownership. Fast release in the compatible drive units enable rapid exchange of cassettes - no tools required and no pins to lose!

The optimum nose radius in each cassette offers the ideal strength to size ratio for restricted clearance applications. (For exceptionally tight spaces consider the UltraSlim Cassettes).

Constant torque output provides accuracy of plus/minus 3% across full stroke.

• Type: Torque Wrench

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: W - Cassette
• SubTypes: Cassette - Imperial or Metric

• Accessories: W2113R104, W2113R107, WTE20, WRP20

EP W8215X

W-Series Low Profile Hexagon Cassettes work with your compatible drive unit, giving you the access needed for hassle-free bolting in tight spaces.

ATEX declared. Calibration certificate included. All W-Series X-edition cassettes are CE - ATEX declared and are shipped complete with a calibration certificate.

Robustly constructed from steel especially for heavy use and enduring durability, these robust cassettes are designed to ensure a low total cost of ownership. Fast release in the compatible drive units enable rapid exchange of cassettes - no tools required and no pins to lose!

The optimum nose radius in each cassette offers the ideal strength to size ratio for restricted clearance applications. (For exceptionally tight spaces consider the UltraSlim Cassettes).

Constant torque output provides accuracy of plus/minus 3% across full stroke.

• Type: Torque Wrench
• Max PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: W - Cassette
• SubTypes: Cassette - Imperial or Metric

• Accessories: W8215R203, W8215R206, WTE80, WRP80

EP XA1UE2LK

• Type: Service Kit

• SubTypes: Repair Part

EP XC115VC

EP XC28V

EP ZCP-1

EP ZE2308MB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP ZE2308PB

Enerpac ZE2 electric hydraulic pumps are based on our Z Pump platform - our most efficient and market proven design. Z-Class high-efficiency pumps offer higher oil flow and by-pass pressure, cooler running and 18% less current draw than comparable pumps.

The ZE2 pump utilizes many of the same robust valves, reservoir, and pump components as larger pumps in the ZE family. Combined with the efficient, easy to service pumping element, the ZE2 is suited to continuous use in manufacturing and workshop environments.

The 0.75 hp (0.56 kW) induction motor in the ZE2 enables productive flow rates, cooler running temperatures, quieter operation, and less power consumption compared to standard universal motors.

Multiple valve and control options allow you to match the pump to a wide range of pressing, punching, and many other operations.

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: ZE
• SubTypes: Electric Pump - High Flow

• 0.75 hp (0,56 kW) induction motor for long life and quiet operation
• Features Z-Class high-efficiency pump design; higher oil flow and by-pass pressure, cooler running and requires up to 18% less current draw than comparable pumps.
• Totally enclosed, fan-cooled industrial electric motors for an extended life and to stand up to harsh industrial environments.
• 71 to 79 dBA across the pressure range
• Low-voltage pendant, on certain models, provides additional safety for the operator.
• Multiple valve and reservoir configurations provide application specific models to match the most demanding industrial applications.
• Models available to suit single-acting or double-acting cylinders.
• High-strength, molded electrical enclosure protects electronics, power supplies and LCD readout from harsh industrial environments.
• LCD readout on electric valve models provides diagnostic and readout capabilities.
• IP54 Rating for superior dust and water protection.
• Wide range of optional factory installed accessories; including return line filter, pressure gauge, heat exchanger, skid bar, roll cage, foot switch, and more.

EP ZE4310SJ-H

EP ZRC-04H

EP ZTM-Q

EP XA12VG

Enerpac XA Series Air Driven Hydraulic Foot Pumps are ideal choice for hands-free operation.

All models offer two control pedals for adding and releasing pressure to the tool. A pedal lock function can be used in the retract position. The XA foot pump provides fine metering controls to apply the mandatory stroke and force.

This air hydraulic foot pump provides a closed hydraulic system that prevents contamination and allows pump usage in any position.

The XA series foot pump has many optional features that can be ordered separately including:

• ½ Gallon Oil Reservoir
• Joy-stick Lever Kit
• Hydraulic Swivel Connector

The maximum operating pressure for this pump is 10,000 psi (700 bar). Maximum flow rates at rated pressure 15 in3/min (1.97L).

• Type: Hydraulic Pump
• Max Bar: 700
• Max PSI: 10000

• Product Group: Pumps
• Product Line: Industrial Tools
• Series: XA
• SubTypes: Air Pump

• Higher oil flow for increased productivity
• Variable oil flow and fine metering for precise control
• Closed hydraulic system prevents contamination and allows pump usage in any position
• Pedal lock function for retract position
• External adjustable pressure setting valve
• ATEX Certified.* Includes ground screw for explosion protection

• Accessories: XPG1, XLK1, XSC1, RFL102

EP FZ-1616

EP HC-9206C

EP LX-101

EP VMMD-003

EP XA-11

EP ZCP-3

EP 41965E

EP 54177

EP A10

EP A152G

EP BHP261G

EP BRD910

EP CAE1050108 -1A

EP CB918041

EP CC131

EP CBE517028-1A

EP EP CH720MC

EP CLL1006K

EP CR79070

EP CW259298

EP DA2557040

EP DA3131217