GRACO INC. S10595

GG 26A363

GG 26A398

GG 26C765

GG 26C918

GG 276067

GG 276984

GG 277853

GG 280569

GG 287844

GG 288133

GG 288175

GG 288183

GG 288425

CONTRACTOR GUN, 4 FINGER, (PKGD)

Graco 288425 Contractor Airless Spray Gun, 4 Finger Trigger, RAC X 517 SwitchTip

The Contractor Airless Spray Gun is the industry standard for performance and durability. Includes a 4-finger trigger and a RAC X 517 SwitchTip and Guard.

• Exclusive FlexSeal Needle
  • Totally enclosed patented design eliminates needle's exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
  • Fluid pushes on seal to quickly shut off needle and reduce spitting
  • Spring is located outside fluid path for better flow
  • Helps eliminate pack out and slow needle shut-off
• Reduced Gun Spitting
  • Repositioned seat is closer to the tip, eliminating 60% of the dead space
  • Less paint left between needle and tip results in less spitting
• Ergonomic Design
  • Form-fitted handle provides maximum control and comfort
  • Detachable trigger guard swings clear of gun handle for easy filter access
  • Lightweight design reduces operator fatigue
• Modular Needle Design
  • Simply remove the trigger cross pin and unthread front housing to change out needle
• EasyGlide Swivel
  • Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
• Easy Out Gun Filter
  • Filters from the inside out to prevent filter from collapsing
  • Interchangeable with all Contractor series guns

• Model: Contractor
• Series: Airless Spray Gun

• Component A Inlet Size (in): 1/4
• Component A Inlet Thread Type: NPSM
• Component Type: Single Component

• Fluid Orifice Size (cm): 0.318
• Fluid Orifice Size (in): 0.125
• Fluid Orifice Size (mm): 3.17

• For Use With: Airless Sprayers

• Gun Activation: Manual
• Gun Type: Airless Gun
• Gun Weight (oz): 22

• Includes: RAC X 517 SwitchTip, RAC X HandTite Guard

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Product Type: Spray Gun

GG 288430

FTX GUN, RAC X(PKGD)

Graco 288430 Contractor FTx Airless Spray Gun, 4 Finger Trigger, RAC X 515 SwitchTip

The Contractor FTx Airless Spray Gun is the economical choice for everyday use while delivering the reliability and performance to achieve a professional finish. Includes a 4-finger trigger and a RAC X 515 SwitchTip and Guard.

• Exclusive FlexSeal Needle
  • Totally enclosed patented design eliminates needle's exposure to fluid, extends needle life by 70%, and ensures consistent needle shut-off
  • Fluid pushes on seal to quickly shut off needle and reduce spitting
  • Spring is located outside fluid path for better flow
  • Helps eliminate pack out and slow needle shut-off
• Reduced Gun Spitting
  • Repositioned seat is closer to the tip, eliminating 60% of the dead space
  • Less paint left between needle and tip results in less spitting
• Ergonomic Design
  • Form-fitted handle provides maximum control and comfort
  • Detachable trigger guard swings clear of gun handle for easy filter access
  • Lightweight design reduces operator fatigue
• Modular Needle Design
  • Simply remove the trigger cross pin and unthread front housing to change out needle
• EasyGlide Swivel
  • Exclusive dual-seat swivel design reduces sealing friction under pressure, making this the best swivel on the market!
• Easy Out Gun Filter
  • Filters from the inside out to prevent filter from collapsing
  • Interchangeable with all Contractor series guns

• Model: Contractor FTx
• Series: Airless Spray Gun

• Component A Inlet Size (in): 1/4
• Component A Inlet Thread Type: NPSM
• Component Type: Single Component

• Fluid Orifice Size (cm): 0.318
• Fluid Orifice Size (in): 0.125
• Fluid Orifice Size (mm): 3.17

• Gun Activation: Manual
• Gun Type: Airless Gun
• Gun Weight (oz): 23.8

• Includes: RAC X 515 SwitchTip, RAC X HandTite Guard

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Maximum Fluid Pressure (bar): 248
• Maximum Fluid Pressure (kPa): 24800
• Maximum Fluid Pressure (MPa): 24.8
• Maximum Fluid Pressure (psi): 3600

• Product Type: Spray Gun

GG 288864

GG 289001

GG 289451

GG 289803

GG 295384

GG 295829

GG 296785

GG 296792

GG 298896

GG 2WL042

GG 512799

GG 521235

GG 521280

GG 551890

GG 00158B

GG 01012B

GG 020249

GG 060186

GG 080012

GG 080256

GG 080325

GG 080499

GG 117029

GG 117610

GG 123394

GG 123679

GG 124316

GG 127290

GG 15A482

GG 16D534

GG 16M736

GG 16W551

GG 17E556

GG 196766

GG 21195-00

GG 215441

GG 21676-00

GG 22908-00

GG 23524-01

GG 23540-00

GG 24D579

GG 24E457

GG 24N486

GG 24N487

GG 24N990

GG 24W364

GG 257532

GG 25C843

GG 25M793

GG 26A071

GG 26C150

GG 948065

GG B200K

GG HFRB-14AHAGANN

GG LPA-172

GG SA902002

GG SA905004

GG SA916K

GG SN712003

GG 651152

HUSKY PUMP, 1050S-PP01AS1SSSSPTPT

Graco 651152 Husky 1050 SS 1 in. (25.4 mm) NPT Pump, PP Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

• Longer Diaphragm Life
  • Up to 5x longer diaphragm life for less maintenance and downtime
• Modular Air Valve
  • Stall-free, low pulsation operation provides smooth and rapid changeover
• One-Piece Center Section
  • Eliminates air leaks for more efficient operation
• Multiple Ports
  • Increased number of ports for installation flexibility
• Optional Features
  • DataTrak - Runaway protection and tracks material usage
  • Pulse Output - Cycle count capability
• Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
• 30% more efficient than the market leader
• 20% increase in fluid flow compared to the Husky 1040

• Model: Husky
• Series: 1050

• Air Exhaust Port Size (in): 3/4
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: 316 Stainless Steel

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE/EPDM 2-Piece

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port, End Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Consumption (SCFM): 67
• Maximum Air Pressure (bar): 8.6

• Maximum Air Pressure (kPa): 860
• Maximum Air Pressure (MPa): 0.86
• Maximum Air Pressure (psi): 125

• Maximum Cycle Rate (CPM): 280

• Maximum Flow Rate (GPM): 50
• Maximum Flow Rate (L/min): 189

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Fluid Pressure (bar): 8.6
• Maximum Fluid Pressure (kPa): 860
• Maximum Fluid Pressure (MPa): 0.86
• Maximum Fluid Pressure (psi): 125

• Maximum Solid Size (cm): 0.3175
• Maximum Solid Size (in): 0.125
• Maximum Solid Size (mm): 3.175

• Power Source: Air

GG 255872

GG LTX633

RAC X LTX TIP, SPRAY, (633)

Graco LTX633 RAC X SwitchTip, 633

The Reverse-A-Clean (RAC) 633 RAC X SwitchTip produces a 12 to 14 inch fan and has a 0.033 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market
  • Longest lasting fan pattern
  • Highest quality finish with a consistent spray pattern
• Easy to Identify Tip Size
  • Large raised tip size numbers are always legible - even when covered with paint
• Superior Tip Design
  • Locking tab ensures tip stays securely in guard
  • Snaps tip in spray or reverse position
  • OneSeal tip gasket installs with no tools
  • Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.17
• Maximum Flow Rate (L/min): 4.43

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.033

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG LTX835

RAC X LTX TIP, SPRAY, (835)

Graco LTX835 RAC X SwitchTip, 835

The Reverse-A-Clean (RAC) 835 RAC X SwitchTip produces a 16 to 18 inch fan and has a 0.035 inch orifice. Reverse the SwitchTip to easily clear clogs.

• Best Tip on the Market
  • Longest lasting fan pattern
  • Highest quality finish with a consistent spray pattern
• Easy to Identify Tip Size
  • Large raised tip size numbers are always legible - even when covered with paint
• Superior Tip Design
  • Locking tab ensures tip stays securely in guard
  • Snaps tip in spray or reverse position
  • OneSeal tip gasket installs with no tools
  • Solvent seal available when using extremely hot solvents

• Model: RAC X
• Series: LTX SwitchTip

• Compatible Material: Lacquer to Mastic, Latex Paint

• For Use With: RAC X HandTite Tip Guard

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 1.31
• Maximum Flow Rate (L/min): 4.96

• Maximum Working Pressure (bar): 280
• Maximum Working Pressure (kPa): 28000
• Maximum Working Pressure (psi): 4050

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.035

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 244825

GG 16N953

GG 24W395

GG AXP511

GG 16N916

GG 24P744

GG 125078

GG 2007298

GG 2000974

GG 2008487

GG 2006566

GG 2000812

GG 2009349

GG FX20FL

GG 2007062

GG 2007055

GG 190837

GG 233858

GG 11055

GG 26B814

GG 2001029