GRACO INC. S10595

GG 24C219

GG 24C293

AGITATOR, HEAVY DUTY, SST

Graco 24C293 Heavy-Duty In-Drum Back-Geared Agitator, Stainless Steel, 1 1/2 inch Bung Adapter, 7/16 inch Shaft Adapter

• Corrosion resistant materials for high quality and long life
• Leak-free gearbox eliminates material contamination common with oil filled units
• Installs easily onto in-drum agitators
• Includes 7/16 in shaft adapter
• ATEX approval for hazardous locations

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• For Use With: 55 Gallon (208 Liter) Drum

• Includes: Heavy Duty Agitator Drive, 2 Adapters

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Speed (RPM): 1200

• Maximum Viscosity (cP): 3000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Motor Type: Pneumatic - Rotary Vane

• Power Rating (HP): 0.25

GG 24C269

GG 24C308

GG 24A690

GG 24A648

GG 24A688

KIT, NEEDLE AND NOZZLE, .042

Graco 24A688 Needle/Nozzle Kit for AirPro Automatic Guns with 0.042 inch (1.1 mm) Nozzle, General Metal

GG 24A645

KIT, ROD,DISPL,WETCUP,75CC

Graco 24A645 Merkur Piston Rod Assembly Kit for LW100A Merkur Displacement Pump

Pump Displacement Rod Size: 75cc, Rod Coating: Ultralife

GG 24A782

GG 24A781

GG 24A784

GG 24A786

GG 24A783

GG 24A788

GG 24A794

GG 24A795

GG 24A799

GG 24A811

GG 24A813

GG 24A818

GG 24A824

GG 24A826

GG 24A842

GG 24A861

KIT, SEAT, SST, DOSE VALVE

Graco 24A861 Stainless Steel Dispense Valve Seat Kits for ProMix 2KS Proportioners

GG 24A914

GG 24A923

GL-32 INJECTOR, 3 INJECTOR MANIFOLD

Graco 24A923 GL-32 Grease-Injector, Carbon Steel, 3-Injector Manifold, 1/4 NPT

With its one piece design, Gracos GL-32 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Easily handles up to NLGI #2 grease.

• Longer lasting seal design for trouble-free performance
• Precision-honed components for reliable operation in challenging environments
• Adjustable output volume from .001 - .008 in cu (0.02 - 0.13 cm cu ) to custom fit the system to meet the needs of each lube point
• Operating pressures from 1200 - 3500 psi (83 - 241 bar) for optimal performance with up to NLGI #2 grease
• Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications

• Model: GL-32
• Adjustable: Adjustable

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Grease
• Compatible Metering Device: Single Line Parallel

• Cycle Indicator: Visual Pin

• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPT

• Material: Carbon Steel

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum Working Pressure (bar): 53
• Minimum Working Pressure (kPa): 5300
• Minimum Working Pressure (MPa): 5.3

• Minimum Working Pressure (psi): 750

• Outlet Size (cm): 0.32
• Outlet Size (in): 0.125
• Outlet Size (mm): 3.2

GG 24A924

GL-32 INJECTOR, 4 INJECTOR MANIFOLD

Graco 24A924 GL-32 Grease-Injector, Carbon Steel, 4-Injector Manifold, 1/4 NPT

With its one piece design, Gracos GL-32 grease injector systems are easy to design, fast to set up and allow you to add or subtract lube points without having to redesign your lubrication system. Easily handles up to NLGI #2 grease.

• Longer lasting seal design for trouble-free performance
• Precision-honed components for reliable operation in challenging environments
• Adjustable output volume from .001 - .008 in cu (0.02 - 0.13 cm cu ) to custom fit the system to meet the needs of each lube point
• Operating pressures from 1200 - 3500 psi (83 - 241 bar) for optimal performance with up to NLGI #2 grease
• Offered both as a stand-alone injector and replacement injector for manifold systems, allowing you to custom fit the injectors to your applications

• Model: GL-32
• Adjustable: Adjustable

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Grease
• Compatible Metering Device: Single Line Parallel

• Cycle Indicator: Visual Pin

• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPT

• Material: Carbon Steel

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum Working Pressure (bar): 53
• Minimum Working Pressure (kPa): 5300
• Minimum Working Pressure (MPa): 5.3

• Minimum Working Pressure (psi): 750

• Outlet Size (cm): 0.32
• Outlet Size (in): 0.125
• Outlet Size (mm): 3.2

GG 24A938

KIT, ACCESSORY

Graco 24A938 Hose Reel Mounting Channel (Accommodates 5 Reels)

• Number of Pieces: 61

GG 24A954

KIT, 55 GALLON SIPHON HOSE

Graco 24A954 55 gal (208 l) Drum Suction Hose and Strainer, 3/4 in fluid inlet

GG 24A955

KIT, 50' AIR/FLUID HOSE

Graco 24A955 50 ft (15.2 m) Bundled Air and Fluid Hose, 3300 psig (228 bar)

GG 24A958

GG 24A959

GG 24B190

GG 24B189

GG 24B248

GG 24B299

GG 24B338

GG 24B425

GG 24B424

GG 24B480

MSP VALVE, ASSY MSP-15T-SS

Graco 24B480 Trabon MSP Stainless Steel Modular Divider Valve - MSP-15T-SS - 0.015 in cu (0.26 cm cu )

The Trabon MSP Stainless Steel Series sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve and is still the best! You get more durability with the same high-quality performance and precision machining as the carbon steel version. The stainless steel MSP valves and accessories overcome harsh conditions, such as salty air or areas needing repetitive cleaning, with durable 303 materials and a design with proven success.

• Quick change valve sections can be removed from the base assembly without disturbing any lube lines - minimizing labor cost and maximizing your machine uptime
• Accessories such as magnetic and electronic proximity switch cycle indicators provide positive assurance of a successful lube event.
• Alternate outlet on face of valves can be fitted with optional performance indicators, taking the guesswork out of troubleshooting
• Lubriquip part number 106-108-950

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, In-Plant Machinery

• Compatible Material: Oil, Grease

• Cycle Indicator: None

• Discharge Per Piston Stroke (in cu ): 0.015

• Divider Valve Series: MSP

• Material: Stainless Steel

• Maximum Cycle Rate (cycles/min): 200

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 176
• Maximum Operating Temperature ( degree F): 350

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (psi): 3500

• Minimum Working Pressure (bar): 14

• Minimum Working Pressure (psi): 200

• Number of Outlets: 2

GG 24B539

KIT, AIR CAP

Graco 24B539 Air Cap, with locating pin, for AirPro Automatic HVLP Guns, General Metal

GG 24B540

GG 24B544

GG 24B570

GG 24B591

CONTROL, GLC 4400 DC

Graco 24B591 GLC 4400 Series Controller, 9-30 VDC

Easily manage your automatic lubrication system. Loaded with features and simple to operate. A must-have controller for ensuring critical machine lubrication.

• Customize your lubrication time, pressure, cycle counts and machine counts for maximum precision and productivity
• Simple icon- and menu-based user interface is easy to setup and operate, saving valuable technician time
• Special operation modes save setup and inspection time
• Works with single line resistive, single line parallel, series progressive and dual line systems

• Model: GLC
• Series: 4400

• Application: Off-Road Equipment, In-Plant Machinery, Mining, Wind Energy

• Compatible Metering Device: Single Line Resistive, Single Line Parallel, Series Progressive

• Intrusion Rating: IP69K

• Maximum Operating Temperature ( degree C): 63
• Maximum Operating Temperature ( degree F): 145

• Maximum Storage Temperature ( degree C): 63
• Maximum Storage Temperature ( degree F): 145

• Minimum Operating Temperature ( degree C): -40
• Minimum Operating Temperature ( degree F): -40

• Minimum Storage Temperature ( degree C): -25
• Minimum Storage Temperature ( degree F): -13

• Overall Depth (cm): 9.14
• Overall Depth (in): 3.6
• Overall Depth (mm): 91.4

• Overall Height (cm): 11.9
• Overall Height (in): 4.8
• Overall Height (mm): 120
• Overall Width (cm): 12.2
• Overall Width (in): 4.8
• Overall Width (mm): 122

• Power Consumption (W): 24

• Power Source: DC

GG 24B596

CONTROL, GLC-4400, AC

Graco 24B596 GLC 4400 Series Controller, 100-240 VAC

Easily manage your automatic lubrication system. Loaded with features and simple to operate. A must-have controller for ensuring critical machine lubrication.

• Customize your lubrication time, pressure, cycle counts and machine counts for maximum precision and productivity
• Simple icon- and menu-based user interface is easy to setup and operate, saving valuable technician time
• Special operation modes save setup and inspection time
• Works with single line resistive, single line parallel, series progressive and dual line systems

• Model: GLC
• Series: 4400

• Application: Off-Road Equipment, In-Plant Machinery, Mining, Wind Energy

• Compatible Metering Device: Single Line Resistive, Single Line Parallel, Series Progressive

• Frequency (Hz): 50/60

• Intrusion Rating: IP69K

• Maximum Operating Temperature ( degree C): 63
• Maximum Operating Temperature ( degree F): 145

• Maximum Storage Temperature ( degree C): 63
• Maximum Storage Temperature ( degree F): 145

• Minimum Operating Temperature ( degree C): -40
• Minimum Operating Temperature ( degree F): -40

• Minimum Storage Temperature ( degree C): -25
• Minimum Storage Temperature ( degree F): -13

• Overall Depth (cm): 9.14
• Overall Depth (in): 3.6
• Overall Depth (mm): 91.4

• Overall Height (cm): 11.9
• Overall Height (in): 4.8
• Overall Height (mm): 120
• Overall Width (cm): 12.2
• Overall Width (in): 4.8
• Overall Width (mm): 122

• Power Consumption (W): 24

• Power Source: AC

GG 24B598

GG 24B600

GG 24B609

GG 24B621

GG 24B622

KIT, DIAPHRAGM-E1 BN

Graco 24B622 Diaphragm Kit

GG 24B628

KIT, DIAPHRAGM-E1 SP

Graco 24B628 Diaphragm Kit

GG 24B645

KIT, 1050, PTFE, BALL

Graco 24B645 Ball Kit

GG 24B629

KIT, DIAPHRAGM-E1 FK

Graco 24B629 Diaphragm Kit

GG 24B638

KIT, SEAT 1050 FK

Graco 24B638 Seat Kit

GG 24P345

XD SERIES 40 REEL, 3/4 X 100 OIL, BLUE

Graco 24P345 XD40, Oil, 1 in. (25 mm) Inlet, 3/4 in. X 100 ft. (19 mm X 30 m) Hose, NPT, Metallic Blue

Graco's XD40 and XD50 Series Hose Reels are engineered to take a beating and still reliably perform in harsh environments so it's ready when you need it. Choose from several color options, thread types and hoses. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze and waste oil.

• Extensive Hose Offering - Standard models come complete with factory installed hoses on the reel, large selection of optional reels to fit various applications
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Rugged and Durable Body - Heavy-duty welded spool and ribbed frame for extra strength and toughness over the long haul

• Model: XD
• Series: 40

• Application: Oil

• Color: Metallic Blue

• Dry Weight (lb): 152

• Frame Type: Box Frame

• Hose Inside Diameter (in): 3/4
• Hose Inside Diameter (mm): 19.05
• Hose Length (ft): 100
• Hose Length (m): 30

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 1
• Inlet Size (mm): 25.4

• Inlet Thread Type: NPT

• Maximum Working Pressure (psi): 1500

• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05

• Overall Height (in): 26.13
• Overall Height (mm): 664
• Overall Length (in): 26.4
• Overall Length (mm): 671
• Overall Width (in): 17.47
• Overall Width (mm): 444

• Recommended Environment: Indoor, Outdoor
• Recommended Fluid Type: Oil

GG 24P600

KIT, PRESSURE SENSOR

Graco 24P600 Pressure Transducer Kit, 100 psi (7 bar, 0.7 MPa). Used to measure fluid or air pressure.

Order Non-IS Cable 16V380 or IS Cable 16V381 to connect either the low-pressure or the high-pressure transducer to the ProControl 1KE.

• For Use With: ProControl 1KE Kit

• Maximum Working Pressure (bar): 8.6
• Maximum Working Pressure (kPa): 860
• Maximum Working Pressure (psi): 125

GG 24P612

GG 24P623

GG 24P635

GG 24P673

KIT,REFILL,HFR,CIRC-SPRAY

KIT INCLUDES: APPLICATOR, BALL SEAT, 3/4 in. [QTY. 1], TUBE, PLYETH.375 OD [QTY. 6 ], FITTING, ELBOW, MALE, SWIVEL, 1/4 NPT [QTY. 2], SWIVEL, UNION [QTY. 2], FITTING, ELBOW, STR, 3/4NPT, 90, 3K, SS [QTY. 1], VALVE, BALL, 2W, 3/4NPT, F, 2K, SS [QTY. 1], FITTING, NIPPLE, HEX, 3/4NPT, 3K, SS [QTY. 1], SEALANT, PIPE, SST [QTY. 1]

GG 24P684

GG 24P728

GG 24P785

GG 24P805

GG 24P823

GG 24P822

MODULE, CONTROL, KIT

Graco 24P822 Control Module Kit

GG 24P850

GG 24P847

GG 24P852

KIT,REPAIR,PUMP ASSEMBLY

Graco 24P852 Pump Assembly Repair Kit

KIT INCLUDES: BALL, (.31250) [QTY. 1], BALL, (.5000) [QTY. 1], PACKING, O-RING [QTY. 1], PACKING, O-RING, PTFE [QTY. 2], PACKING, O-RING [QTY. 1], BEARING, PISTON [QTY. 1], BEARING, THROAT [QTY. 1], SEAL, U-CUP, PISTON [QTY. 1], SEAL, U-CUP, THROAT [QTY. 1], SEAT, CARBIDE [QTY. 1], TOOL, INSTALLATION, SEAL [QTY. 1], RING, in.O in. [QTY. 1], VALVE, PISTON [QTY. 1]

GG 24P855

KIT,OUTLET FILTER

Graco 24P855 100 Mesh Welded Outlet Filter Kit

KIT INCLUDES: FILTER, ASSY, 100 MESH, WELDED [QTY. 1], LUBRICANT, ANTI-SEIZE [QTY. 1]

GG 24P862

GG 24P867

GG 24R021

FUSION MP GUN, MANUAL 2K

Graco 24R021 Manual 2K Dispense Gun

Gracos 2K Manual Dispense Gun is a hand-operated dispensing gun making joint and crack fill floor maintenance easy with a single handle that starts and stops A and B materials simultaneously. Compatible with Reactor E-8p for Flooring and the unheated Reactor E-10.

• Easy to use
• Does not require compressed air to operate
• Uses a static mixer for proper mixing of 1:1 ratio materials
• Uses check valves to help prevent material cross-over

• Model: Fusion MP
• Series: Specialty

• Compatible Material: Polyurea

• Maximum Fluid Pressure (bar): 137
• Maximum Fluid Pressure (kPa): 13700
• Maximum Fluid Pressure (MPa): 14
• Maximum Fluid Pressure (psi): 2000

• Maximum Fluid Pressure (bar): 137
• Maximum Fluid Pressure (kPa): 13700
• Maximum Fluid Pressure (MPa): 14
• Maximum Fluid Pressure (psi): 2000

• Maximum Fluid Working Pressure (bar): 137
• Maximum Fluid Working Pressure (MPa): 14
• Maximum Fluid Working Pressure (psi): 2000

GG 24R042

GG 24R046

SANIFORCE PISTON PUMP, 2:1, STD LGTH, UHMW

Graco 24R046 2:1 Ratio SaniForce Standard Drum Length Double Ball Piston Pump with UHMWPE & FKM Packings

Easily transfer low to medium viscosity food and personal care materials up to 50,000 cps out of drums and totes. Gracos SaniForce 2:1 piston pump utilizes proven Graco air motor technology and smart sanitary design. The pump is extremely portable, weighing between 24 lb (10.8 kg) for the standard drum length and 26 lb (11.7 kg) for the long length. Plus, it fits through a standard bung hole.

• SaniForce 2:1 Sanitary Piston Pump:

  Flow rates range from 1.5 gpm (5.7 lpm) at 60 cpm, up to 2.5 gpm (9.5 lpm) at 100 cpm

  Quick disconnect clamps for easy disassembly

  Fluid transfer and supply of materials up to 50,000 cps

  Suitable to pump products such as: fruit juice concentrates, creamy candy fillings, ice cream variegates, and cosmetics

  • SaniForce 2:1 Air Motor:

    Removable, wash down safe, FDA-compliant shroud lets you easily access the air valve

    Simple knuckle joint design for easy removal of air motor from lower

    • Easy Mounting:

      SaniForce 2:1 pump fits through standard bung hole

      FDA-compliant bung adapter accessory available for easy mounting

      
      

      • Model: SaniForce
      • Air Inlet Size (in): 3/8
      • Air Inlet Size (mm): 9.525
      • Air Inlet Thread Gender: Female
      • Air Inlet Thread Type: NPT
      • Application: Sanitary
      • Compatible Material: Food, Personal Care
      • Fluid Outlet Size (in): 1
      • Fluid Outlet Size (mm): 25.4
      • For Use With: Food, Personal Care, & Pharmaceutical
      • Material: Stainless Steel
      • Maximum Air Inlet Pressure (bar): 6.9
      • Maximum Air Inlet Pressure (kPa): 690
      • Maximum Air Inlet Pressure (psi): 100
      • Maximum Continuous Cycle Rate (CPM): 60
      • Maximum Flow Rate (GPM): 2.5
      • Maximum Flow Rate (L/min): 9.46
      • Maximum Intermittent Cycle Rate (CPM): 60
      • Maximum Working Pressure (bar): 17
      • Maximum Working Pressure (kPa): 1700
      • Maximum Working Pressure (MPa): 1.7
      • Maximum Working Pressure (psi): 250
      • Portable: Non-Portable
      • Pump Ratio: 2:1

GG 24R047

SANIFORCE PISTON PUMP, 2:1, STD LGTH, PTFE

Graco 24R047 2:1 Ratio SaniForce Standard Drum Length Double Ball Piston Pump with PTFE & FKM Packings

Easily transfer low to medium viscosity food and personal care materials up to 50,000 cps out of drums and totes. Gracos SaniForce 2:1 piston pump utilizes proven Graco air motor technology and smart sanitary design. The pump is extremely portable, weighing between 24 lb (10.8 kg) for the standard drum length and 26 lb (11.7 kg) for the long length. Plus, it fits through a standard bung hole.

• SaniForce 2:1 Sanitary Piston Pump:

  Flow rates range from 1.5 gpm (5.7 lpm) at 60 cpm, up to 2.5 gpm (9.5 lpm) at 100 cpm

  Quick disconnect clamps for easy disassembly

  Fluid transfer and supply of materials up to 50,000 cps

  Suitable to pump products such as: fruit juice concentrates, creamy candy fillings, ice cream variegates, and cosmetics

  • Easy Mounting:

    SaniForce 2:1 pump fits through standard bung hole

    FDA-compliant bung adapter accessory available for easy mounting

    
    

    • Model: SaniForce
    • Air Inlet Size (in): 3/8
    • Air Inlet Size (mm): 9.525
    • Air Inlet Thread Gender: Female
    • Air Inlet Thread Type: NPT
    • Application: Sanitary
    • Compatible Material: Food, Personal Care
    • Fluid Outlet Size (in): 1
    • Fluid Outlet Size (mm): 25.4
    • For Use With: Food, Personal Care, & Pharmaceutical
    • Maximum Air Consumption (SCFM): 6
    • Maximum Air Inlet Pressure (bar): 6.9
    • Maximum Air Inlet Pressure (kPa): 690
    • Maximum Air Inlet Pressure (psi): 100
    • Maximum Continuous Cycle Rate (CPM): 60
    • Maximum Flow Rate (GPM): 2.5
    • Maximum Flow Rate (L/min): 9.46
    • Maximum Intermittent Cycle Rate (CPM): 60
    • Maximum Working Pressure (bar): 17
    • Maximum Working Pressure (kPa): 1700
    • Maximum Working Pressure (MPa): 1.7
    • Maximum Working Pressure (psi): 250
    • Portable: Non-Portable
    • Pump Ratio: 2:1

GG 24R050

KIT,PRESSURE,SENSOR

Graco 24R050 Pressure Transducer Kit for E-Flo DC Motors

GG 24R369

GG 24R195

GG 24R137

GG 24R374

GG 24R482

KIT,CUTTER HEAD ASSEMBLY

KIT INCLUDES: HEAD, BASE, CUTTER ASSEMBLY [QTY. 1], HEAD, CLAMP, CUTTER ASSEMBLY [QTY. 1], SCREW, SET, CPPT, #8, 3/8, SST, PATCH [QTY. 2], TOOL, WRENCH, HEX [QTY. 1]

• Catalyst Inlet Size (in): 1/4
• Catalyst Inlet Thread Gender: Female
• Catalyst Inlet Thread Type: NPT

GG 24R226

GG 24R606

KIT, BLADE, CUTTER

Graco 24R606 100-Pack of Cutter Blades

KIT INCLUDES: BLADE, CUTTER [QTY. 100 ]

• For Use With: RS Gun Cutter Assemblies

GG 24R086

MODULE,FIBER TO SERIAL CONVERTER

Graco 24R086 Fiber/Serial Converter Kit for E-Flo DC Motors

• Coating Type: Waterborne

• Compatible Paint Type: Epoxy, High Solids, Lacquers, Latex, Plural Component Materials, Polyurethanes, Urethanes, UV Curing, Varnishes, Waterborne

GG 24R804

GG 24R809

EXACTABLEND AGP SYSTEM, 100CC/100CC, BOOM

Graco 24R809 55/5 gal (200/19 L) AGP-S100 Silicone Machine with Boom

The Graco ExactaBlend AGP (Advanced Glazing Proportioner) provides on-ratio dispensing of two-component sealants and adhesives for curtainwall, insulating glass and other applications. The variable ratio ExactaBlend AGP offers advanced technologies at an affordable price.

Advanced pumping technology creates a better, more consistent bead - which results in reduced rework and less wasted material.

• Real-time ratio assurance means less waste, more profits

  Provides automatic shut-down if off-ratio conditions occur

  Cuts material waste and reduces rework for a healthier bottom line

• Optimal mix for quality assurance

  Ultimately reduces the chance of seal failure on insulating glass

  Results in better quality end product

• Easy to operate

  Quick and easy setup - operator simply enters the ratio setting

  Easy to switch ratio settings

• Optional data download provides reports on ratio, flow rate and material usage

  A & B material usage

  Flow rate

  Alarm events

  Ratio

• Model: Exactablend
• Series: AGP

• Catalyst Inlet Size (in): 1/4
• Catalyst Inlet Thread Gender: Female
• Catalyst Inlet Thread Type: NPT

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 21
• Maximum Working Pressure (psi): 3000

• Minimum Flow Rate (kg/min): 1
• Minimum Flow Rate (lb/min): 2.21

GG 24R056

GG 24R832

AGP HOSE,ASSY,#1

Graco 24R832 #1 5/8 in x 120 in Base Hose Package with 2 1/8 in x 60 in Catalyst Hoses

• Hose kit #1 - Base hose plus catalyst hoses of 3 mm (1/8 in) and 3 mm (1/8 in) diameter.

GG 24R067

GG 24R191

GG 24R324

GG 24R735

GG 24R181

GG 24R810

EXACTABLEND AGP SYSTEM, 100CC/100CC

Graco 24R810 55/5 gal (200/19 L) AGP-S100 Silicone Machine (Boom Not Included)

The Graco ExactaBlend AGP (Advanced Glazing Proportioner) provides on-ratio dispensing of two-component sealants and adhesives for curtainwall, insulating glass and other applications. The variable ratio ExactaBlend AGP offers advanced technologies at an affordable price.

Advanced pumping technology creates a better, more consistent bead - which results in reduced rework and less wasted material.

• Real-time ratio assurance means less waste, more profits

  Provides automatic shut-down if off-ratio conditions occur

  Cuts material waste and reduces rework for a healthier bottom line

• Optimal mix for quality assurance

  Ultimately reduces the chance of seal failure on insulating glass

  Results in better quality end product

• Easy to operate

  Quick and easy setup - operator simply enters the ratio setting

  Easy to switch ratio settings

• Optional data download provides reports on ratio, flow rate and material usage

  A & B material usage

  Flow rate

  Alarm events

  Ratio

• Model: Exactablend
• Series: AGP

• Catalyst Inlet Size (in): 1/4
• Catalyst Inlet Thread Gender: Female
• Catalyst Inlet Thread Type: NPT

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 21
• Maximum Working Pressure (psi): 3000

• Minimum Flow Rate (kg/min): 1
• Minimum Flow Rate (lb/min): 2.21

GG 24R885

KIT,CYCLE SWITCH

Graco 24R885 Cycle Switch Kit

KIT INCLUDES: SWITCH, REED, ASSY [QTY. 1], SCREW, PAN HEAD, #8-32 X 1.5 in. [QTY. 1], WASHER, FLAT [QTY. 1]

• Catalyst Inlet Size (in): 1/4
• Catalyst Inlet Thread Gender: Female
• Catalyst Inlet Thread Type: NPT

GG 24R187

GG 24R900

REACTOR E-10 SPRAYER, HP, 230V

Graco 24R900 230 V Reactor E-10HP Sprayer

If youd like to add polyurea projects to your lineup, the Reactor E-10hp High Pressure Proportioner is a smart, affordable investment that can help your business grow. The Reactor E-10hp provides the high pressure power and performance you need to spray polyurea coatings. Its lightweight and portable - and runs on residential power so you don't need to invest in a generator. With the system's innovative boost heat and insulated tanks, material heats up fast so you're up and running sooner. In fact, youre ready to spray in 20 minutes, compared to over an hour startup time on a standard Reactor E-10.

• Digital heat controls

  Allows you to enter the exact temperatures you need

  Uses the same circuit boards as a standard Reactor

• Motor

  Offers 50% more power than the Reactor E-10

  Provides improved spray performance with reduced pressure drop

• Low Level Sensors

  Indicates when material is low (1 gal/3.8 L remaining)

  No contact with materials - prevents buildup

• Insulated Tanks

  Double-wall insulated to retain heat

  Smooth interior lining for easy cleaning

  Improved seal design on lid for better moisture control

• Quick knockdown Lower Pumps

  Easy disassembly and maintenance

• Robust Hybrid Heater

  More power, faster material handling means more uptime

• Temperature Guages in Y-strainers

  Provides accurate tank temperature readings

• Model: Reactor
• Series: E-10hp

• Amperage (A): 15
• Application: Protective Coatings

• Base Inlet Size (cm): 0.635
• Base Inlet Size (in): 1/4
• Base Inlet Size (mm): 6.35

• Catalyst Inlet Size (cm): 0.635
• Catalyst Inlet Size (in): 1/4
• Catalyst Inlet Size (mm): 6.35

• Compatible Material: Plural Components

• Frequency (Hz): 50/60

• Gun Type: No Gun

• Includes: Proportioner, (2) Heaters

• Maximum Flow Rate (cc/min): 3790

• Maximum Flow Rate (GPM): 1
• Maximum Flow Rate (L/min): 3.79

• Maximum Working Pressure (bar): 172
• Maximum Working Pressure (kPa): 17200
• Maximum Working Pressure (MPa): 17.2
• Maximum Working Pressure (psi): 2500

• Overall Depth (cm): 91.4
• Overall Depth (in): 36
• Overall Depth (mm): 914

• Overall Height (cm): 116.8
• Overall Height (in): 46
• Overall Height (mm): 1168
• Overall Width (cm): 73.7
• Overall Width (in): 29
• Overall Width (mm): 737

• Power Source: Electric

• Pressure Type: Low Pressure

GG 24R216