IR 2130-2
1/2" Air Impact Wrench, 2" Ext Anvil, Heavy Duty, 550 ft-lb Torque, Friction Ring Retainer, Pistol
Reliable and durable, this 2130 Series Impact Wrench was built to help you succeed. From your first to your last job, this wrench will see you through.
Features And Benefits
- Performance: Features a twin hammer impact mechanism, 1200 blows per minute, 9500 rpm, 550 ft.-lbs. of max reverse torque and 350 ft.-lbs. of forward torque.
- Uses: This impact wrench is great for changing tires and general vehicle repair.
- Durability: Thanks to its steel hammer case and composite housing, this wrench will endure anything, from repeated drops to harsh chemicals. It’ll never let you down.
- Extended Reach: The 2-inch extended anvil provides you with increased reach that’s invaluable when working with deeper fasteners.
Product Application and Uses: This impact wrench is great for changing tires and general vehicle repair.
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 22
Air Consumption @ Load (l/min): 623
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Anvil Length: 2" Extended
Average Air Consumption (cfm): 4.4
Average Air Consumption (l/min): 125
Blows per Min: 1200
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 1/2
Drive Type: Square
Duty Rating: Heavy Duty
End Plates: Aluminum with Hard-coating
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 89.8 / 100.8
Hammer Case: Steel
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 94.5 / 105.5
Max Bolt Diameter (in): 9/16
Max Free Speed (rpm): 9500
Max Pressure (bar): 6.2
Max Torque (ft-lb): 549
Max Torque (in-lb): 6594
Max Torque (nm): 745
Min Hose Size (in): 3/8
Motor: Reverse Bias
Number of Power Settings: 3
Power Source: Air Powered
Product Length (in): 9.25
Product Width (in): 2.8
Product Height (in): 7.2
Product Weight (lb): 4.6
Recommended Forward Torque Range (ft-lb): 25-350
Recommended Forward Torque Range (in-lb): 301-4195
Recommended Forward Torque Range (nm): 34-474
Retainer Type: Friction Ring
Side to Center Distance (in): 1.41
Side to Center Distance (mm): 36
Special Features: Extended anvil
Speed Setting: Variable Speed
Standards/Certifications: CE
Tool Type: Full-size
Vanes: 6
Vibration Level (m/s2): 10.7
Warranty: 1-year
Similar IR
