Plural Component

View as Grid List

Sort by

Display items per page

FUSION AP GUN, AR4242, AUTO

GG 248377

FUSION AP GUN, AR4242, AUTO

Round Fusion Air-Purge Gun with 01 Mix Chamber

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

For high output spray polyurethane foam and polyurea applications. Easy air-blast tip cleaning reduces build-up and tip clogging. Long-lasting side seals means less downtime for maintenance Quick-release fluid housing - lets you easily change the mix chambers without tools Hand-tightened front cap - no tools needed to clean and maintain seals and mix chamber Ergonomic handle

$5,050.00

FUSION AP GUN, AF2929 FT0438, AUTO

GG 248381

FUSION AP GUN, AF2929 FT0438, AUTO

Graco 248381 Fusion Air-Purge Gun, 0.038 in (0.96 mm) Orifice Size, 0.029 in (0.74 mm) Impingement Port & 8-10 in (203-254 mm) Flat Pattern Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Auto

Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
Fluid Orifice Size (cm): 0.074
Fluid Orifice Size (in): 0.029
Fluid Orifice Size (mm): 0.74
Gun Type: Air Purge Gun
Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9
Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130
Maximum Flow Rate @ PSI (lb/min): 50
Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature (°C): 93
Maximum Fluid Temperature (°F): 200
Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature (°C): 93
Maximum Fluid Temperature (°F): 200
Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80
Mix Chamber: 00 (.029)
Overall Height (cm): 9.5
Overall Height (in): 3.75
Overall Height (mm): 95
Overall Length (cm): 19.3
Overall Length (in): 7.6
Overall Length (mm): 193
Overall Width (cm): 7.9
Overall Width (in): 3.1
Overall Width (mm): 79
Pattern Size (in): 8-10 in @ 24 in from target

$5,050.00

PROMIX 2KE PROPORTIONER, SYSTEM, PUMP

GG 24F108

PROMIX 2KE PROPORTIONER, SYSTEM, PUMP

ProMix 2KE Proportioner, air, 35:1 Air Assist Merkur & Merkur Bellows pumps, screen reporting, for hazardous location The ProMix 2KE is an entry level, compact, easy to use plural component system allowing you to mix on-demand for all spray technologies. Designed for multi-color, two component, in-booth applications Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1 Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter Off-ratio material will not reach your product – eliminating expensive re-work Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more

$38,190.00

PROMIX 2KE PROPORTIONER, SYSTEM, PUMP

GG 24F109

PROMIX 2KE PROPORTIONER, SYSTEM, PUMP

ProMix 2KE Proportioner, air, 3:1 Air Spray Merkur pumps, USB reporting, for hazardous location The ProMix 2KE is an entry level, compact, easy to use plural component system allowing you to mix on-demand for all spray technologies. Designed for multi-color, two component, in-booth applications Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1 Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter Off-ratio material will not reach your product – eliminating expensive re-work Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more

$32,480.00

PROMIX 2KE PROPORTIONER, METER, ACID

GG 24Z013

PROMIX 2KE PROPORTIONER, METER, ACID

Graco 24Z013 ProMix 2KE Acid Catalyst Meter, 1 color/1 catalyst, IS, intrinsically safe alternator power

The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate.

Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion.
Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter
Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more

Model: ProMix
Series: 2KE

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Activation: Manual
Includes: 2KE Meter-Based Proportioner, G3000 (A), G3000A (B), 1 Color, 1 Catalyst, Intrinsically Safe Alternator Power
Material Type: Two Component
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Fluid Viscosity (cP): 5000
Maximum Fluid Viscosity (cP): 5000
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 206.8
Maximum Working Pressure (kPa): 20680
Maximum Working Pressure (MPa): 20.7
Maximum Working Pressure (psi): 3000
Measuring Type: Meter
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: N/A
Number of Colors: 1
Number of Resin Colors: 1
Power Source: Electric
Proportioning Type: Manual Electronic
Pump Ratio: Meter only

$30,080.00

PROMIX 2KE PROPORTIONER, METER, ACID

GG 24Z014

PROMIX 2KE PROPORTIONER, METER, ACID

ProMix 2KE Acid Catalyst Meter, 3 color/1 catalyst, IS, intrinsically safe alternator power The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate. Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion. Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1 Stay on ratio within predefined tolerance limits, down to ±2% with the pump version, ±1% with meter Off-ratio material will not reach your product – eliminating expensive re-work Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more

$33,510.00

FUSION AP GUN, ROUND 00

GG 246100

FUSION AP GUN, ROUND 00

Graco 246100 Round Fusion Air-Purge Gun with 00 Mix Chamber and 0.029 in (0.74 mm) Orifice Size

With long-life mix chamber and durable side seals, Fusion guns are designed to reduce maintenance and downtime, and provide a better mix.

Application: For high output spray polyurethane foam and polyurea applications.

Easy air-blast tip cleaning reduces build-up and tip clogging.
Long-lasting side seals means less downtime for maintenance
Quick-release fluid housing - lets you easily change the mix chambers without tools
Ergonomic handle

Model: Fusion AP
Series: Round

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPT
Applicator Type: Manual
Compatible Material: Adhesives, Polyurethane, Polyurea, Polyurethane Coating, Spray Polyurethane Foam
Component A Inlet Size (cm): 1.27
Component A Inlet Size (in): 1/2-20
Component A Inlet Size (mm): 12.7
Component A Inlet Thread Type: UNF
Component B Inlet Size (cm): 1.42875
Component B Inlet Size (in): 9/16-18
Component B Inlet Size (mm): 14.2875
Component B Inlet Thread Type: UNF
Component Type: Plural-Component
Fluid Orifice Size (cm): 0.074
Fluid Orifice Size (in): 0.029
Fluid Orifice Size (mm): 0.74
For Use With: Non-Flammable Foam and Polyurea
Gun Activation: Manual
Gun Included: 1
Gun Type: Air Purge Gun
Gun Weight (g): 1130
Gun Weight (kg): 1.1
Gun Weight (lb): 2.5
Gun Weight (oz): 40
Impingement Port Size (in): 0.029
Impingement Port Size (mm): 0.70
Includes: AR2929 Mix Chamber Tip
Maximum Air Inlet Pressure (bar): 9
Maximum Air Inlet Pressure (kPa): 900
Maximum Air Inlet Pressure (MPa): 0.9
Maximum Air Inlet Pressure (psi): 130
Maximum Air Pressure (bar): 9
Maximum Air Pressure (kPa): 900
Maximum Air Pressure (MPa): 0.9
Maximum Air Pressure (psi): 130
Maximum Flow Rate @ PSI (lb/min): 50
Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature (°C): 93
Maximum Fluid Temperature (°F): 200
Maximum Fluid Pressure (bar): 241
Maximum Fluid Pressure (kPa): 24100
Maximum Fluid Pressure (MPa): 24.1
Maximum Fluid Pressure (psi): 3500
Maximum Fluid Temperature (°C): 93
Maximum Fluid Temperature (°F): 200
Maximum Fluid Working Pressure (bar): 245
Maximum Fluid Working Pressure (MPa): 24.5
Maximum Fluid Working Pressure (psi): 3500
Minimum Air Inlet Pressure (bar): 5.5
Minimum Air Inlet Pressure (kPa): 550
Minimum Air Inlet Pressure (MPa): 0.55
Minimum Air Inlet Pressure (psi): 80
Mix Chamber: 00 (.029)
Overall He

$3,680.00

PROCONTROL 1KS PROPORTIONER, PROMX, REMTE

GG 262381

PROCONTROL 1KS PROPORTIONER, PROMX, REMTE

Graco 262381 ProControl 1KS with G3000 Meter

Maintain a closed loop flow control system for a superior finish with the same proven technology as the ProMix® 2KS

Single Component Flow Control
Integrated Flushing
Optional Color Change Modules

Model: ProControl
Series: 1KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Frequency (Hz): 50/60
Includes: ProControl 1KS Module, G3000 Meter
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 5000
Maximum Fluid Viscosity (cP): 5000
Maximum Number of Colors: Up to 30
Maximum Operating Temperature (°C): 50
Maximum Operating Temperature (°F): 122
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20

$24,880.00

REACTOR 2 E-30 PROPORTIONER, 10KW

GG 272010

REACTOR 2 E-30 PROPORTIONER, 10KW

Graco 272010 Reactor 2 E-30 Proportioner, 10 kW

Each feature in the Reactor 2 was strategically designed to help your business, with innovations that help your operation run smoothly. Software and hardware enhancements for better spray performance. And new technologies that add to your bottom line.

Application: Next generation technology for spray foam insulation and polyurea.

Reactor 2 E-30 gives you:
Compact footprint - more room in your spray rig
Ergonomic design - easier to service
Advanced control modules
Better spraying performance compared to traditional electric Reactor systems
Troubleshooting made quick and easy with QR codes
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Easy to reach, conveniently-placed electronics
Advanced control modules
Handles power fluctuations
Sacrificial surge protector
Protects your electronics against excessive power spikes
Smooth, consistent spray performance - similar to hydraulic systems
Three-year warranty
Covers user display module, control modules and electric motor
One of the best in the industry

Model: Reactor 2
Series: E-30
Product Series: Non-Elite

Amperage (A): 34 @ 350 to 415 V ac (3-Phase WYE), 50 @ 200 to 240 V ac (3-Phase Delta), 78 @ 200 to 240 V ac (1-Phase)
Application: Spray Foam
Applicator Type: Manual
Compatible Material: Plural Components
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: No Gun
Hose Package: No Hose
Material Application: Polyurethane Foam
Maximum Flow Rate (kg/min): 13.61
Maximum Flow Rate (lb/min): 30
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Hose Length (ft): 310
Maximum Hose Length (m): 94.5
Maximum Mix Ratio: 1:1
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working

$36,450.00

REACTOR 2 E-XP2 PROPORTIONER

GG 272012

REACTOR 2 E-XP2 PROPORTIONER

Graco 272012 Reactor 2 E-XP2 Proportioner

Count on the Reactor 2 E-XP2 proportioner for advanced technology in applying fast-curing polyurea coatings. Because it&prime, s a Reactor 2 series proportioner, it offers software and hardware enhancements for better spray performance, plus technologies that add to your bottom line. The Reactor 2 E-XP2 is engineered to process and spray polyurea and other coatings that require high pressures. The hybrid heater and heated hose condition the materials to the right viscosity prior to mixing. Quick knockdown lower pump for easy maintenance, easy-to-use controls, and rugged design make the Reactor the preferred choice for coatings applications.

Application: Next generation technology for polyurea coatings.

Reactor 2 E-XP2 gives you:
Compact footprint - more room in your spray rig
Ergonomic design - easier to service
Advanced control modules
Better spraying performance compared to traditional electric Reactor systems
Troubleshooting made quick and easy with QR codes
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Easy to reach, conveniently-placed electronics
Advanced control modules
Handles power fluctuations
Sacrificial surge protector
Protects your electronics against excessive power spikes
Smooth, consistent spray performance - similar to hydraulic systems
Three-year warranty
Covers user display module, control modules and electric motor
One of the best in the industry
Reactor Elite models include:
Inlet pressure and temperature sensor
Xtreme-Wrap Scuff Guard on heated hoses for Reactor 2 packages

Model: Reactor 2
Series: E-XP2
Product Series: Non-Elite

Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 62 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
Application: Protective Coatings
Applicator Type: Manual
Compatible Material: Plural Components
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: No Gun
Hose Length (ft): 50, 10
Hose Length (m): 15, 3
Hose Package: No Hose
Material Application: Polyurea

$40,650.00

REACTOR 2 E-XP2 PROPORTIONER, ELITE

GG 272112

REACTOR 2 E-XP2 PROPORTIONER, ELITE

Graco 272112 Reactor 2 E-XP2 Elite Proportioner

Application: Next generation technology for polyurea coatings.

Reactor 2 E-XP2 gives you:
Compact footprint - more room in your spray rig
Ergonomic design - easier to service
Advanced control modules
Better spraying performance compared to traditional electric Reactor systems
Troubleshooting made quick and easy with QR codes
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Easy to reach, conveniently-placed electronics
Advanced control modules
Handles power fluctuations
Sacrificial surge protector
Protects your electronics against excessive power spikes
Smooth, consistent spray performance - similar to hydraulic systems
Three-year warranty
Covers user display module, control modules and electric motor
One of the best in the industry
Reactor Elite models include:
Inlet pressure and temperature sensor
Xtreme-Wrap Scuff Guard on heated hoses for Reactor 2 packages

Model: Reactor 2
Series: E-XP2
Product Series: Elite

Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 62 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
Application: Protective Coatings
Applicator Type: Manual
Compatible Material: Plural Components
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: No Gun
Hose Package: No Hose
Material Application: Polyurea
Maximum Flow Rate (cc/min): 7570
M

$44,250.00

XP SYSTEM, 4:1, 220/54, BF, CH, HS

GG 282404

XP SYSTEM, 4:1, 220/54, BF, CH, HS

Graco 282404 XP50 Hazardous Location Spray Package, Cart, 4:1 Mix Ratio, Hopper, Solvent Pump, Heaters, XTR Gun, 240V

Two-component spraying made easy and affordable. Graco XP50 Plural-Component Sprayers are designed to pump, mix and atomize medium to high solid coatings with superior results. When you upgrade from hand mixing, you&prime, ll find that the XP provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

Application: For higher-volume protective coatings.

Reduced material waste
No more throwing away unused mixed material at the end of the day
Save money by using less clean-up solvent
Easy to operate - minimal training required
Reduced maintenance costs
Rated for 5000 psi (345 bar) to handle viscous materials and long hose lengths

Series: XP50

Air Inlet Size (in): 3/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPSM
Applicator Type: Automatic Airless, Manual Airless
Compatible Material: Protective Coatings, Primer, Epoxies, Polyurethane, Two-Component Coating, Solvents
Component Type: Plural-Component
Configuration: Cart Mount with 7 gallon (26.5 Liter) Hopper
Fluid Inlet Size (in): 1-1/4
Fluid Inlet Thread Gender: Male
Fluid Inlet Thread Type: NPSM
Fluid Outlet Size (in): 1/2
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Solvent
Hose Length (ft): 35
Hose Length (m): 10.7
Includes: Cart, Material Hoses, XTR-5 Gun, NXT 6500 Air Motor, Hoppers, IS Fluid Heater, Flush Pump
Material Application: Coatings, Paints, Primers
Maximum Air Consumption (SCFM): 60 scfm/gpm at 100 psi
Maximum Air Inlet Pressure (bar): 12.07
Maximum Air Inlet Pressure (kPa): 1207
Maximum Air Inlet Pressure (MPa): 1.21
Maximum Air Inlet Pressure (psi): 175
Maximum Cycle Rate (CPM): 40
Maximum Flow Rate (cc/min): 10970
Maximum Flow Rate (GPM): 2.9
Maximum Flow Rate (L/min): 10.97
Maximum Fluid Temperature (°C): 71
Maximum Fluid Temperature (°F): 160
Maximum Fluid Viscosity (cP): 20000
Maximum Fluid Temperature (°C): 71
Maximum Fluid Temperature (°F): 160
Maximum Fluid Viscosity (cP): 20000
Maximum Hose Length (ft): 300
Maximum Hose Length (m): 91.4
Maximum Operating Temperature (°C): 54
Maximum Operating Temperature (°F): 130
Maximum Spray Pressure (bar): 344
Maximum Spray Pressure (kPa): 34400
Maximum Spray Pressure (MPa): 34
Maximum Spray Pressure (psi): 5000
Maximum Working Pressur

$47,230.00

FRP RS CHOP SYSTEM, XC, 13:1, CMB, 25

GG 16R003

FRP RS CHOP SYSTEM, XC, 13:1, CMB, 25

Graco 16R003 13:1 Ratio External Mix Chop System with 25 ft (7.6 m) Hose, Cart, Mast, and Boom

To keep material costs low, the system has been designed so that it doesn’t need a surge bottle and a low amount of solvent and resin is needed to prime the pump. It also features a dual trigger function, allowing operators to change from wet-out to chop without removing the chopper. By purely using Graco components, that are proven in multiple industries, you will have a solution that is technologically advanced, durable and long lasting.

Application: Fiberglass chopper System for Open Molding Handle fiberglass and catalyzed resin with ease with Graco spray-up laminating components and systems. The FRP system can be used to apply chopped fiberglass on your open mold applications. It offers precise on-ratio dispensing with easy transition from wet-out to chop.

Optimized ratio stability
- Lower cost of ownership
  - Optional DataTrak™ Control
    - Gravity Fed Catalyst System
      - New Linkage and Catalyst Pump
        Truly engineered linkage for superior ratio control
        Allows for infinite adjustment of catalyst percentage — no tools required
        Ensures proper catalyst percentage and optimum results
        Variance of 1% or less
        Balanced Graco NXT® Air Motor
        Provides same output pressure on upstroke and downstroke, resulting in more consistent spray pattern
        Shortened stroke on pump for better spray pattern
        Control Panel
        Easy user interface with all gauges in one location
        Stable, Lightweight Cart
        Easy to maneuver
        Strong, durable casters
        
        Model: FRP
        Series: XC
        Air Inlet Size (in): 1/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Component A Inlet Size (in): 3/8
        Component B Inlet Size (in): 1-5/16
        Component B Thread Gender: Male
        Component B Thread Type: UN-2A
        Fluid Inlet Size (in): 3/4
        Fluid Inlet Thread Gender: Male
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT

$16,860.00

XP SYSTEM, 2:1, 115/58, BF, CH, HS, JB

GG 576205

XP SYSTEM, 2:1, 115/58, BF, CH, HS, JB

Graco 576205 XP70 Non-Hazardous Spray Package, Cart, 2:1 Mix Ratio, Hopper, Solvent Pump, Heaters, Junction Box, XTR Gun, 240V

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70’s design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, you&prime, ll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate – choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That’s because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

Application: High-pressure performance for two-part high-solids coatings.

Reduced material waste
No more throwing away unused mixed material at the end of the day
Save money by using less clean-up solvent
Easy to operate - minimal training required
Reduced maintenance costs
Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

Series: XP70

Air Inlet Size (in): 3/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPSM
Applicator Type: Automatic Airless, Manual Airless
Compatible Material: Protective Coatings, Primer, Epoxies, Polyurethane, Two-Component Coating, Solvents
Component Type: Plural-Component
Configuration: Cart Mount with 7 gallon (26.5 Liter) Hopper
Fluid Inlet Size (in): 1-1/4
Fluid Inlet Thread Gender: Male
Fluid Inlet Thread Type: NPSM
Fluid Outlet Size (in): 1/2
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Solvent
Hose Length (ft): 35
Hose Length (m): 10.7
Includes: Heaters, Solvent Flush Pump, Hoppers
Material Application: Coatings, Paints, Primers
Maximum Air Consumption (SCFM): 75 scfm/gpm at 100 psi
Maximum Air Inlet Pressure (bar): 12.07
Maximum Air Inlet Pressure (kPa): 1207
Maximum Air Inlet Pressure (MPa): 1.21
Maximum Air Inlet Pressure (psi): 175
Maximum Cycle Rate (CPM): 40
Maximum Flow Rate (cc/min): 6800
Maximum Flow Rate (GPM): 1.8
Maximum Flow Rate (L/min): 6.8
Maximum Fluid Temperature (°C): 71
Maximum Fluid Temperature (°F): 160
Maximum Fluid Viscosity (cP): 20000
Maximum Fluid Temperature (°C): 71
Maximum Fluid Temperature (°F): 160
Maximum Fluid Viscosity (cP): 20000
Maximum Hose Length (ft): 300
Maximum Hose Length (m): 91.4
Maximum Operating Temperature (°C): 54
Maximum Operating Temperature (°F): 130
Maximum Spray Pressure (bar): 500
Maximum Spray Pressure (kPa): 50000
Maximum Spray Pressure (MPa):

$50,420.00

PROMIX PD1K PROPORTIONER, SYS, AUTO

GG AC0500

PROMIX PD1K PROPORTIONER, SYS, AUTO

ProMix PD2K Automatic Proportioner, Standard, Control Module Only 100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall. Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems Faster color changes and less material to flush mean less waste and less downtime Stalls under pressure for consistent, on-ratio results (within 1% accuracy) Proportion both epoxy and urethane with ONE system Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

$32,320.00

PROMIX PD2K PROPORTIONER, SYS, AUTO, LP

GG AC1000

PROMIX PD2K PROPORTIONER, SYS, AUTO, LP

ProMix PD2K Automatic Proportioner, Standard, Low Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump 100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall. Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems Faster color changes and less material to flush mean less waste and less downtime Stalls under pressure for consistent, on-ratio results (within 1% accuracy) Proportion both epoxy and urethane with ONE system Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

$67,890.00

PROMIX PD2K PROPORTIONER, SYS, AUTO, HP

GG AC2000

PROMIX PD2K PROPORTIONER, SYS, AUTO, HP

Graco AC2000 ProMix PD2K Automatic Proportioner, Standard, High Pressure, 70 cc Resin Pump, 35 cc Catalyst Pump

100% Positive Displacement Technology for accurate mix ratios and consistent performance. Great for short pot life materials, the ProMix PD mixes the material close to the gun so the flush zone is significantly smaller. This allows for faster color changes, less material usage and disposal costs overall.

Up to 80% reduction in flushing waste over the most efficient traditional proportioning systems
Faster color changes and less material to flush mean less waste and less downtime
Stalls under pressure for consistent, on-ratio results (within 1% accuracy)
Field serviceable in less than 20 minutes - no need for costly factory rebuilds like gear pumps

Model: ProMix
Series: PD2K

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Applicator Type: Automatic
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Activation: Automatic
Material Type: Plural Component
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 30
Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (MPa): 0.7
Maximum Working Pressure (psi): 100
Measuring Type: Meter
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: Up to 4
Number of Color Valves: N/A
Number of Resin Colors: Up to 30
Power Source: Electric
Pressure Type: High Pressure
Proportioner Type: Automatic
Proportioning Type: Automatic Electronic

$76,040.00

PROMIX 2KS PROPORTIONER AUTO

GG AD120N

PROMIX 2KS PROPORTIONER AUTO

Graco AD120N ProMix 2KS Automatic Wall Panel System, EasyKey with LCD display, G3000 meter, 4 color valves and single catalyst

Easy to use electronic proportioner for a broad range of Solvent borne, waterborne, and acid catalyzed materials. The ProMix 2KS offers the highest degree of ratio assurance for superior quality on both manual and automatic applications. Efficient tracking and reporting along with effective color changes reduces wasted material.

Optional flow control is cleanly integrated without incorporating a mixed material line meter. Pressure and flow loops provide fast step changes with superior closed loop control.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Automatic
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Automatic
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 12
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: 4 Valves
Number of Colors: 4
Number of Resin Colors: 4
Power Source: Electric
Proportioner Type: Automatic Wall
Proportioning Type: Automatic Electronic

$83,000.00

PROMIX 2KS PROPORTIONER AUTO SYSTEM

GG AE100N

PROMIX 2KS PROPORTIONER AUTO SYSTEM

Graco AE100N ProMix 2KS Auto Wall Panel System, EasyKey, G3000 (A, B) Meter, Single Catalyst

Optional flow control is cleanly integrated without incorporating a mixed material line meter. Pressure and flow loops provide fast step changes with superior closed loop control.
Fluid manifold design reduces material volume and streamlines fluid porting for cleaner flushing
Intrinsically safe fluid panels easily integrate into hazardous areas
Advanced web interface provides consolidated system management and reporting

Model: ProMix
Series: 2KS

Air Inlet Size (cm): 0.9525
Air Inlet Size (in): 3/8
Air Inlet Size (mm): 9.525
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT
Amperage (A): 2
Applicator Type: Automatic
Component Type: Two Component
Fluid Inlet Size (cm): 0.635
Fluid Inlet Size (in): 1/4
Fluid Inlet Size (mm): 6.35
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 1/4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Flush Type: Air/Solvent
Frequency (Hz): 50/60
Gun Activation: Automatic
Material Type: Two Component
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Viscosity (cP): 3000
Maximum Fluid Viscosity (cP): 3000
Maximum Mix Ratio: 50:1
Maximum Number of Colors: Up to 3
Maximum Working Pressure (bar): 275.8
Maximum Working Pressure (kPa): 27580
Maximum Working Pressure (MPa): 27.6
Maximum Working Pressure (psi): 4000
Measuring Type: Meter
Meter Type: G3000
Minimum Flow Rate (cc/min): 75
Minimum Flow Rate (GPM): 0.02
Minimum Flow Rate (L/min): 0.075
Minimum Fluid Viscosity (cP): 20
Minimum Mix Ratio: 0.1:1
Mix Accuracy (%): 1
Number of Catalysts: 1
Number of Color Valves: No Valves
Number of Colors: 1
Number of Resin Colors: Up to 30
Power Source: Electric
Proportioner Type: Automatic Wall
Proportioning Type: Automatic Electronic

$73,990.00

REACTOR 2 H-40 SYSTEM, 230V, 20KW, ELITE, AP

GG AHH144

REACTOR 2 H-40 SYSTEM, 230V, 20KW, ELITE, AP

Graco AHH144 Reactor 2 H-40 Elite Proportioner Package, Fusion AP Gun, (6) Heated Hoses with Xtreme-Wrap, 20 kW, 230 V, 3PH

Graco&prime, s hydraulic Reactor H-40 brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.

Application: For medium to high-output foam applications and roofing projects - applies up to 52 lb (23.6 kg) per minute. Graco&prime, s line of hydraulic Reactors brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.

What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 model
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Sacrificial surge protector
Protects your electronics against excessive power spikes
Three-year warranty
Covers user display and control modules
One of the best in the industry

Model: Reactor 2
Series: H-40
Product Series: Elite

Amperage (A): 95
Application: Spray Foam
Applicator Type: Manual
Compatible Material: Plural Components
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: Fusion AP
Hose Length (ft): 50, 10
Hose Length (m): 15.2, 3
Hose Package: Multi-Hose
Includes: Proportioner, Fusion AP Gun, Heated Hose with Scuff Guard, Heated Whip Hose, Graco Insite, Fluid Inlet Sensors
Material Application: Polyurethane Foam
Maximum Flow Rate (kg/min): 20.41
Maximum Flow Rate (lb/min): 45
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Mix Ratio: 1:1
Overall Depth (cm): 53
Overall Depth (in): 20.88
Overall Depth (mm): 530
Overall Height (cm): 160.8
Overall Height (in): 63.3

$73,360.00

REACTOR 2 E-30 SYSTEM, 10KW, AP

GG AP2010

REACTOR 2 E-30 SYSTEM, 10KW, AP

Graco AP2010 Reactor 2 E-30 Proportioner Package, Fusion AP Gun, Heated Hose with Xtreme-Wrap, 10 kW, 230/400 V

Application: Next generation technology for spray foam insulation and polyurea.

Reactor 2 E-30 gives you:
Compact footprint - more room in your spray rig
Ergonomic design - easier to service
Advanced control modules
Better spraying performance compared to traditional electric Reactor systems
Troubleshooting made quick and easy with QR codes
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Easy to reach, conveniently-placed electronics
Advanced control modules
Handles power fluctuations
Sacrificial surge protector
Protects your electronics against excessive power spikes
Smooth, consistent spray performance - similar to hydraulic systems
Three-year warranty
Covers user display module, control modules and electric motor
One of the best in the industry

Model: Reactor 2
Series: E-30
Product Series: Non-Elite

Amperage (A): 34 @ 350 to 415 V ac (3-Phase WYE), 50 @ 200 to 240 V ac (3-Phase Delta), 78 @ 200 to 240 V ac (1-Phase)
Application: Spray Foam
Applicator Type: Manual
Compatible Material: Plural Components
Component A Inlet Size (in): 1/2
Component A Inlet Size (mm): 12.7
Component A Thread Type: JIC
Component B Inlet Size (mm): #10
Component B Outlet Size (in): 5/8
Component B Outlet Size (mm): 15.875
Component B Thread Type: JIC
Component Type: Two Component
Fluid Inlet Size (cm): 1.905
Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: Fusion AP
Hose Length (ft): 50, 10
Hose Length (m): 15, 3
Hose Package: Single Hose
Includes: P

$42,530.00

REACTOR 2 H-30 SYSTEM, 10KW, AP

GG APH031

REACTOR 2 H-30 SYSTEM, 10KW, AP

Graco APH031 Reactor 2 H-30 Proportioner Package, Fusion AP Gun, Heated Hose with Xtreme-Wrap, 10 kW, 230/400 V

Graco&prime, s hydraulic Reactor H-30 brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.

Application: For medium to high-output foam applications and roofing projects – applies up to 28 lb (12.3 kg) per minute.

What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Sacrificial surge protector
Protects your electronics against excessive power spikes
Three-year warranty
Covers user display and control modules
One of the best in the industry

Model: Reactor 2
Series: H-30
Product Series: Non-Elite

Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 46 @ 200 to 240 V ac (3-Phase Delta), 79 @ 200 to 240 V ac (1-Phase)
Application: Spray Foam
Applicator Type: Manual
Compatible Material: Plural Components
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: Fusion AP
Hose Length (ft): 50, 10
Hose Length (m): 15, 3
Hose Package: Single Hose
Includes: Proportioner, Fusion AP Gun, Heated Hose with Scuff Guard, Heated Whip Hose
Material Application: Polyurethane Foam
Maximum Flow Rate (kg/min): 12.7
Maximum Flow Rate (lb/min): 28
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Mix Ratio: 1:1
Maximum Working Pressure (bar): 138
Maximum Working Pressure (kPa): 13800
Maximum Working Pressure (MPa): 13.8
Maximum Working Pressure (psi): 2000
Overall Depth (cm): 53
Overall Depth (in): 20.88
Overall Depth (mm): 530

$48,210.00

REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, AP

GG APH062

REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, AP

Graco APH062 Reactor 2 H-XP2 Proportioner Package, Fusion AP Gun, Heated Hose, 15 kW, 230/400V

Graco&prime, s hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.

Application: For coatings that require high-pressures - applies up to 1.5 gal (5.7 liters) per minute. Graco&prime, s line of hydraulic Reactors brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.

What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Sacrificial surge protector
Protects your electronics against excessive power spikes
Three-year warranty
Covers user display and control modules
One of the best in the industry

Model: Reactor 2
Series: H-XP2
Product Series: Non-Elite

Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
Application: Protective Coatings
Applicator Type: Manual
Compatible Material: Plural Components
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: Fusion AP
Hose Length (ft): 50, 10
Hose Length (m): 15, 3
Hose Package: Single Hose
Includes: Fusion AP Gun, Heated Hose, Whip Hose
Material Application: Polyurea
Maximum Flow Rate (cc/min): 5680
Maximum Flow Rate (GPM): 2
Maximum Flow Rate (L/min): 5.7
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Mix Ratio: 1:1
Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (MPa): 24.1
Maximum Worki

$54,160.00

REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, ELITE, AP

GG APH162

REACTOR 2 H-XP2 SYSTEM, SEL, 15KW, ELITE, AP

Graco APH162 Reactor 2 H-XP2 Elite Proportioner Package, Fusion AP Gun, Heated Hose, 15 kW, 230/400V

Graco&prime, s hydraulic Reactor H-XP2 brings increased yield and high output spraying. Ideal for in-plant OEM&prime, s or applicators that spray at high volumes.

What a hydraulic system can do for you:
Dependability - robust, durable, longest life spray system
Reduce downtime - allows for longer time in between required maintenance
Increase daily productivity - capable of extremely high duty cycle
Reactor Connect : Communication and Control at your Fingertips
Control your Reactor using your phone
Improve productivity and yield by optimizing spray parameters and never having to go back to your rig
Monitor your rigs/crews using the multi-system dashboard
Troubleshoot an issue quickly using real-time data
Provide documentation to a customer
Use reports to better manage your business
Saves all your spray data to the cloud
Utilize account management to better manage your equipment and crews
Reactor Connect comes standard with all Reactor 2 models
Advanced control technology
Tracks, monitors and saves project data
Data can be saved and downloaded onto a USB drive
Stores up to 24 chemical recipes
Drum level indicators
Sacrificial surge protector
Protects your electronics against excessive power spikes
Three-year warranty
Covers user display and control modules
One of the best in the industry
Elite Models
Graco InSite included
Inlet pressure and temperature sensors (interfaces with Graco InSite)
Xtreme-Wrap Scuff Guard on heated hoses when ordered as a package

Model: Reactor 2
Series: H-XP2
Product Series: Elite

Amperage (A): 35 @ 350 to 415 V ac (3-Phase WYE), 59 @ 200 to 240 V ac (3-Phase Delta), 100 @ 200 to 240 V ac (1-Phase)
Application: Protective Coatings
Applicator Type: Manual
Compatible Material: Plural Components
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: Fusion AP
Hose Length (ft): 50, 10
Hose Length (m): 15, 3
Hose Package: Single Hose
Includes: Fusion AP Gun, Heated Hose with Xtreme-Wrap, Heated Hose, Elite Kit
Material Application: Polyurea
Maximum Flow Rate (cc/min): 5680
Maximum Flow Rate (GPM): 2
Maximum Flow Rate (L/min): 5.7
Maximum Fluid Temperature (°C): 88
Maximum Fluid Temperature (°F): 190
Maximum Fluid Temperature (°C): 88
Maxi

$57,160.00

REACTOR E-10HP SYSTEM, CMPLT, 120V

GG APT100

REACTOR E-10HP SYSTEM, CMPLT, 120V

Graco APT100 Reactor E-10 HP Proportioner Package, Fusion AP Gun, 120 V

The Reactor E-10hp is an ideal entry-level system and is great for coating projects such as balconies, pools, waterproofing and bedliner applications. It&prime, s a smart, affordable investment that will help your business grow

Application: Entry-level system for pure and hybrid polyurea coatings.

Digital heat controls
Allows you to enter the exact temperatures you need
Uses the same circuit boards as a standard Reactor
Single knob motor operation
Intuitive, easy to use
Insulated tanks
Double-wall insulated to retain heat
Smooth interior lining for easy cleaning
Improved seal design on lid for better moisture control
Boost heat
Directs unused power from the motor circuit to additional heater rods
Additional heater power brings material to desired temperatures faster during recirculation mode
Robust hybrid heater
More power, faster material heating means more uptime
Motor
Offers 50% more power than the Reactor E-10
Provides improved spray performance with reduced pressure drop
Quick knockdown lower pumps
Easy disassembly and maintenance
Temperature gauges in Y-strainers
Provides accurate tank temperature readings
Portable
Fits through standard doorways
Plugs into standard 120V or 230V outlets
Rugged wheels for extreme jobsites
No need for generator
Wide tank opening
Easy material loading and easy to clean

Model: Reactor
Series: E-10hp

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Outlet Size (cm): 0.635
Air Outlet Size (in): 1/4
Air Outlet Size (mm): 6.35
Air Outlet Thread Type: NPSM
Amperage (A): 20
Application: Protective Coatings
Applicator Type: Manual
Compatible Material: Plural Components
Component Type: Two Component
Flush Type: Solvent
Frequency (Hz): 50/60
Gun Type: Fusion AP
Hose Length (ft): 35
Hose Length (m): 10.7
Includes: Proportioner, Fusion AP Gun, Unheated Hose
Material Application: Polyurea
Maximum Flow Rate (cc/min): 3790
Maximum Flow Rate (GPM): 1
Maximum Flow Rate (L/min): 3.79
Maximum Fluid Temperature (°C): 77
Maximum Fluid Temperature (°F): 170
Maximum Fluid Temperature (°C): 77
Maximum Fluid Temperature (°F): 170
Maximum Mix Ratio: 1:1
Maximum Spray Pressure (bar): 151.7

$34,950.00

Refine