Torque Control

STR 810153

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810410

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810417

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810424

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810673

STR 815700

Beam & Dial Torque Wrenches: Dial Torque Wrenches, in-lb

Product Description

• Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
• Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
• Glare-resistant dial cover makes it easy to read in difficult light conditions
• Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
• Heavy-duty dial guard protects against breakage
• Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
• Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
• Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
• Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
• Each wrench comes in its own rugged, blow-molded, storage case
• FREE NIST-traceable tabulated certification included.

STR 815719

Beam & Dial Torque Wrenches: Dial Torque Wrenches, in-lb

Product Description

• Accuracy of +/- 3% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Includes free Certificate of Calibration from our ISO 17025 Accredited Lab
• Error Proofing By Design: Oversized dial face is extremely easy to read and helps to eliminate parallax error
• Glare-resistant dial cover makes it easy to read in difficult light conditions
• Error Proofing By Design: A memory indicator is provided on each wrench and remains at the maximum torque achieved for positive torque verification
• Heavy-duty dial guard protects against breakage
• Dial faces are color-coded: silver for inch-pounds, gold for foot-pounds, and white for Newton meters
• Wrenches with a capacity of up to 50 ft-lbs have a black powder-coated handle that provides an industrial-strength finish
• Wrenches with a capacity of 175 to 250 ft-lbs have a flexible PVC handle. The flexible PVC grip that comes on tools up to 250 ft. lbs. supports proper grip and provides comfort during use
• Wrenches with a capacity of 600 to 1000 ft-lbs have a specially designed extension aluminum handle that is easy to grip
• Each wrench comes in its own rugged, blow-molded, storage case
• FREE NIST-traceable tabulated certification included.

STR 850227

Beam & Dial Torque Wrenches: Flat and Tapered Beam Torque Wrenches, ft-lb

Product Description

• Incredibly durable design
• Exceptional accuracy retention permits extended calibration intervals and extremely low ownership cost
• Flat and Tapered Beam torque wrenches have a very low cost of ownership; they are virtually maintenance and repair-free
• Pivoted handle concentrates load at a precise point on the lever to assure torque accuracy
• Memory feature consists of pointers that follow a track on the scale and remain in place to indicate peak torque achieved
• Peak torque indicated on the scale is accurate even in destructive applications
• Bi-directional accuracy of +/- 2% of Indicated Value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Includes FREE certificate of calibration from our +/- .25% Indicated Value accuracy/ISO/IEC 17025 Accredited Calibration Laboratory

STR 869756

Micrometer Adjustable Torque Wrenches: SDR Series Micrometer Adjustable Click Wrench, ft-lb

Product Description

• Adjust torque value by rotating the grip
• Grip lock makes locking in torque value fast, easy, and secure
• Tool changees from one end of the scale to the other with the fewest number of turns
• Ball-bearing rock-over assembly assures smooth operation enhances repeatability and increases wrench service life
• Accuracy of +/- 4% of Indicated Value from 20% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Error Proofing By Guidance design provides a strong audible and tactile impulse when the set torque is achieved
• Error Proofing By Design flattened case provides the mechanism with superior support resulting in a wrench that is easier to calibrate and one that holds calibration longer
• Flattened case prevents side loading during torque application or testing/calibration
• Knurled grip offers an ergonomic grip that remains comfortable over long periods of use
• Ratchet is built for durability
• Ratchet replacement is fast and easy when needed
• All tools up to 250 ft-lb capacity come with a rugged, custom-molded plastic case
• Includes FREE tabulated calibration certificate from our ISO 17025 certified calibration laboratory

UT TS-35

AIM IAC4EGV

AIM IEC4EGV

CL MPRO250-AP-NA

CL MPRO400GCD-M

EP DSX3000

DSX-Series Square Drive Hydraulic Torque Wrenches are a lighter alternative to steel alternatives and are therefore a great choice when improved portability and easier handling are important.

ATEX declared. Calibration certificate included. All DSX tools are CE - ATEX declared and are shipped complete with a calibration certificate.

Each hydraulic torque wrench in the series features industry-first and patented* design features for safer and easier operation while working at height. These include a working-at-height tether point and a retained reaction arm - both which prevent injury and near misses from dropped objects.

A fully enclosed drive and the ergonomic safety handle further enhances operator safety and ATEX certification provides reassurance for the operator when working in explosive atmospheres.

You might expect that a torque wrench fully loaded with so many safety and convenience features to be priced at the top of the market. But the mid-range pricing of DSX torque wrenches makes them incredibly strong contenders for 'mid-weight' users and cost-conscious buyers.

• Type: Torque Wrench
• Max Bar: 690
• Max PSI: 10000
• Min Bar: 690
• Min PSI: 10000

• Product Group: Torque Wrenches, Torque Wrench Pumps
• Product Line: Bolting Tools
• Series: DSX
• SubTypes: Square Drive Torque Wrench

• High-strength, lightweight aluminum, slimline design suited for complete operator safety
• Fully enclosed drive for maximum safety
• Built-in, work-at-height safety tether connection
• Retained quick release push-button
• Patented, easy-to-use, quick release, retained reaction arm
• Fine-tooth ratchet prevents the tool 'locking on'
• High-cycle design with fewer moving parts making it a more efficient tool to operate, maintain, or repair.
• 35 degree rotation angle and rapid return stroke for fast operation
• Supplied with a calibration certificate

• Robust handle which mounts on either side of the tool for extra maneuverability and safer operation
• Push-button square drive and reaction arm for fast changes and adjustments
• Easily accessible work-at-height connection point

• Constant torque output provides accuracy of +/- 3% across full stroke.

• All DSX tools are CE - ATEX certified

*Patented Features

1) The Reaction Arm locking mechanism. Applicable countries: UK, Europe, USA & Canada.

2) The Safety Tether. A steel wire tether that limits the total removal of the arm and providing the rotating connection point for working at height. Applicable countries: UK, USA, Europe, China & Australia

• Set Includes: ENPD01, DSX3000-08, DSX3000-SA02, SWH6A
• Accessories: MCS7500C, DSX3000-08, DDA30010, DDA30012, DDA30014, DDA30100, DDA30102, DDA30104, DDA3017, DDA3019, DDA3022, DDA3024, DDA3027, DDA3030, DDA3032

ETA 36200-341-3

ETA 36200-424-2

ETA 36200-428

ETA 38400-124-1

ETA 38400-432-0

ETA 51600-478M-0

ETA 51600-479-0

ETA ASG-TH

ETA B250-0

ETA EL1015-IPHV