Transfer

View as Grid List
Sort by
Display items per page
GG P32ESB.jpg

DURA-FLO PUMP, 6500/430

GG P32ESB

GG P32ESB

DURA-FLO PUMP, 6500/430

Dura-Flo NXT 2-Ball Piston Pump, 32:1, De-Icing Exhaust Motor, DataTrak, SST, 3 UHMW / 2 Tuffstack Packings

Graco’s Dura-Flo pumps with NXT technology provide uniform and easy to control delivery. Ideal for supply applications, these durable pumps feature an NXT motor and can now achieve an even higher range of pressures without compromising flow.

Positive displacement, 2 ball piston design provides uniform and easily controlled delivery High pump pressure and flow performance to handle a broad range of paints and coatings Improved serviceability with fewer parts, faster repairs and lower ownership cost Monitor and protect your pump with DataTrak
$20,410.00
Picture of CHECK-MATE PUMP, 38:1 1200/060 CS SD

CHECK-MATE PUMP, 38:1 1200/060 CS SD

GG P38LCS

GG P38LCS

CHECK-MATE PUMP, 38:1 1200/060 CS SD

Graco P38LCS 38:1 - 60cc Check-Mate Pump with NXT 1200 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.

Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer
  • NXT 1200 Air Motor

    Low Noise

    Modular design for easier maintenance

    Highest technology air motor on the market

  • 60cc Check-Mate Lower

    Severe Duty coatings on rods and cylinder Extends production time

  • Standard Threaded Coupler -

  • Replaceable Seat

    Minimizes service costs

  • Cast Outlet and Inlet Housing

      Improves structural integrity

    • NEW Xtreme® Coupler

        Quick-disconnect coupler for easy maintenance

      • Replaceable Outlet Fitting

          Reduces repair costs

        • Piston Valve with Floating Piston Seal

            For maximum pressure balance over a range of material viscosities

          • Replaceable Seat

              Minimizes service costs

            • Floating Priming Plate

                Provides uniform flow

              • Cast Outlet and Inlet Housing

                  Improves structural integrity

                • NEW Cartridge Throat Packings

                    Allows for easy servicing without removing from ram

                  • Modular Air Valve

                      De-icing controls

                      Up to 50% quieter than previous models

                      Modular air valve - eliminates stalling, easy-to-repair

                    • Hard Part Coatings

                        Standard Severe Duty™ coating on rods and cylinder maximizes wear life


                      • Model: Check-Mate
                      • Ambient/Warm Melt/Hot Melt: Ambient
                      • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
                      • Fluid Outlet Size (in): 3/4
                      • Fluid Outlet Thread Gender: Male
                      • Fluid Outlet Thread Type: NPT
                      • Includes: Motor, Displacement Pump, Washer (6), Screw
                      • Material: Carbon Steel
                      • Maximum Working Pressure (bar): 262
                      • Maximum Working Pressure (kPa): 26200
                      • Maximum Working Pressure (MPa): 26.2
                      • Maximum Working Pressure (psi): 3800
                      • Power Type: Pneumatic
                      • Pump Ratio: 38:1
$7,960.00
Picture of Solotech St10 Pump, I10-Mpm-Cs-Hs-A1-A1-0

Solotech St10 Pump, I10-Mpm-Cs-Hs-A1-A1-0

GG 19Z004

GG 19Z004

SOLOTECH ST10 PUMP, I10-MPM-CS-HS-A1-A1-0

Graco 19Z004 SoloTech i10 Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & BLDC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: Hastelloy
  • Flow Rate (GPM): 0.67
  • Gear Ratio: 37.66:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.017
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Brushless DC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 53
  • Overall Height (in): 21
  • Overall Height (mm): 533
  • Overall Length (cm): 41
  • Overall Length (in): 16.3
  • Overall Length (mm): 414
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Power Rating (HP): 120
  • Power Rating (kW): 89.48
  • Power Rating (W): 89484
  • Pump Speed (RPM): 2-93
$10,010.00
Picture of Solotech St10 Pump, I10-Mpm-Ep-Pv-A1-A1-0

Solotech St10 Pump, I10-Mpm-Ep-Pv-A1-A1-0

GG 19Z007

GG 19Z007

SOLOTECH ST10 PUMP, I10-MPM-EP-PV-A1-A1-0

Graco 19Z007 SoloTech i10 EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & BLDC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: PVDF
  • Flow Rate (GPM): 0.67
  • Gear Ratio: 37.66:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.017
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Brushless DC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 53
  • Overall Height (in): 21
  • Overall Height (mm): 533
  • Overall Length (cm): 41
  • Overall Length (in): 16.3
  • Overall Length (mm): 414
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Power Rating (HP): 120
  • Power Rating (kW): 89.48
  • Power Rating (W): 89484
  • Pump Speed (RPM): 2-93
$8,710.00
Picture of Solotech St10 Pump, I10-Mpm-Ep-Hs-A1-A1-0

Solotech St10 Pump, I10-Mpm-Ep-Hs-A1-A1-0

GG 19Z008

GG 19Z008

SOLOTECH ST10 PUMP, I10-MPM-EP-HS-A1-A1-0

Graco 19Z008 SoloTech i10 EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & BLDC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: Hastelloy
  • Flow Rate (GPM): 0.67
  • Gear Ratio: 37.66:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.017
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Brushless DC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 53
  • Overall Height (in): 21
  • Overall Height (mm): 533
  • Overall Length (cm): 41
  • Overall Length (in): 16.3
  • Overall Length (mm): 414
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Power Rating (HP): 120
  • Power Rating (kW): 89.48
  • Power Rating (W): 89484
  • Pump Speed (RPM): 2-93
$9,890.00
Picture of Solotech St10 Pump, I10-Lac-Cs-Pv-A1-A1-0

Solotech St10 Pump, I10-Lac-Cs-Pv-A1-A1-0

GG 19Z011

GG 19Z011

SOLOTECH ST10 PUMP, I10-LAC-CS-PV-A1-A1-0

Graco 19Z011 SoloTech i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & AC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: PVDF
  • Flow Rate (GPM): 0.08
  • Gear Ratio: 157.43:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.013
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Low Speed AC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 42
  • Overall Height (in): 16.7
  • Overall Height (mm): 424
  • Overall Length (cm): 41
  • Overall Length (in): 16.2
  • Overall Length (mm): 411
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Pump Speed (RPM): 2-11
$6,780.00
Picture of Solotech St10 Pump, I10-Lac-Bn-Ss-A1-A1-0

Solotech St10 Pump, I10-Lac-Bn-Ss-A1-A1-0

GG 19Z013

GG 19Z013

SOLOTECH ST10 PUMP, I10-LAC-BN-SS-A1-A1-0

Graco 19Z013 SoloTech i10 Low Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & AC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 0.08
  • Gear Ratio: 157.43:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: Nitrile
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.013
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Low Speed AC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 42
  • Overall Height (in): 16.7
  • Overall Height (mm): 424
  • Overall Length (cm): 41
  • Overall Length (in): 16.2
  • Overall Length (mm): 411
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Pump Speed (RPM): 2-11
$6,400.00
Picture of Solotech St10 Pump, I10-Lac-Ep-Ss-A1-A1-0

Solotech St10 Pump, I10-Lac-Ep-Ss-A1-A1-0

GG 19Z014

GG 19Z014

SOLOTECH ST10 PUMP, I10-LAC-EP-SS-A1-A1-0

Graco 19Z014 SoloTech i10 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & AC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 0.08
  • Gear Ratio: 157.43:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.013
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Low Speed AC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 42
  • Overall Height (in): 16.7
  • Overall Height (mm): 424
  • Overall Length (cm): 41
  • Overall Length (in): 16.2
  • Overall Length (mm): 411
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Pump Speed (RPM): 2-11
$6,400.00
Picture of Solotech St10 Pump, I10-Lac-Ep-Hs-A1-A1-0

Solotech St10 Pump, I10-Lac-Ep-Hs-A1-A1-0

GG 19Z016

GG 19Z016

SOLOTECH ST10 PUMP, I10-LAC-EP-HS-A1-A1-0

Graco 19Z016 SoloTech i10 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & AC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: Hastelloy
  • Flow Rate (GPM): 0.08
  • Gear Ratio: 157.43:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.013
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Low Speed AC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 42
  • Overall Height (in): 16.7
  • Overall Height (mm): 424
  • Overall Length (cm): 41
  • Overall Length (in): 16.2
  • Overall Length (mm): 411
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Pump Speed (RPM): 2-11
$7,740.00
Picture of Solotech St10 Pump, I10-Mac-Cs-Ss-A1-A1-0

Solotech St10 Pump, I10-Mac-Cs-Ss-A1-A1-0

GG 19Z018

GG 19Z018

SOLOTECH ST10 PUMP, I10-MAC-CS-SS-A1-A1-0

Graco 19Z018 SoloTech i10 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & AC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 0.2625
  • Gear Ratio: 48:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.044
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Mid Speed AC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 44
  • Overall Height (in): 17.3
  • Overall Height (mm): 439
  • Overall Length (cm): 41
  • Overall Length (in): 16.2
  • Overall Length (mm): 411
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Pump Speed (RPM): 6-38
$6,550.00
Picture of Solotech St10 Pump, I10-Hac-Nr-Ss-A1-A1-0

Solotech St10 Pump, I10-Hac-Nr-Ss-A1-A1-0

GG 19Z025

GG 19Z025

SOLOTECH ST10 PUMP, I10-HAC-NR-SS-A1-A1-0

Graco 19Z025 SoloTech i10 High Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber Hose, 316 Stainless Steel Barb & AC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 0.646
  • Gear Ratio: 19.5:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: Rubber
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.108
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: High Speed AC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 46
  • Overall Height (in): 18.2
  • Overall Height (mm): 462
  • Overall Length (cm): 41
  • Overall Length (in): 16.2
  • Overall Length (mm): 411
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Pump Speed (RPM): 15-92
$6,400.00
Picture of Solotech St10 Pump, I10-Hac-Cs-Pv-A1-A1-0

Solotech St10 Pump, I10-Hac-Cs-Pv-A1-A1-0

GG 19Z027

GG 19Z027

SOLOTECH ST10 PUMP, I10-HAC-CS-PV-A1-A1-0

Graco 19Z027 SoloTech i10 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & AC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i10
  • Application: Industrial
  • Barb Material: PVDF
  • Flow Rate (GPM): 0.646
  • Gear Ratio: 19.5:1
  • Hose Diameter (cm): 1
  • Hose Diameter (in): 0.4
  • Hose Diameter (mm): 10
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 0.95
  • Inlet Size (in): 3/8
  • Inlet Size (mm): 9.5
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 0.67
  • Maximum Flow Rate (L/min): 2.5
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.108
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: High Speed AC
  • Outlet Size (cm): 9
  • Outlet Size (in): 3.54
  • Outlet Size (mm): 90
  • Overall Height (cm): 46
  • Overall Height (in): 18.2
  • Overall Height (mm): 462
  • Overall Length (cm): 41
  • Overall Length (in): 16.2
  • Overall Length (mm): 411
  • Overall Width (cm): 33
  • Overall Width (in): 13
  • Overall Width (mm): 330
  • Pump Speed (RPM): 15-92
$6,780.00
Picture of Solotech St23 Pump, I23-Lac-Cs-Hs-A1-A1-0

Solotech St23 Pump, I23-Lac-Cs-Hs-A1-A1-0

GG 19Z046

GG 19Z046

SOLOTECH ST23 PUMP, I23-LAC-CS-HS-A1-A1-0

Graco 19Z046 SoloTech i23 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & AC Motor

Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i23
  • Application: Industrial
  • Barb Material: Hastelloy
  • Flow Rate (GPM): 0.572
  • Gear Ratio: 157:1
  • Hose Diameter (cm): 2.3
  • Hose Diameter (in): 0.91
  • Hose Diameter (mm): 23
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 2.5
  • Inlet Size (in): 1
  • Inlet Size (mm): 25
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 4.5
  • Maximum Flow Rate (L/min): 17
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.095
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Low Speed AC
  • Outlet Size (cm): 10.8
  • Outlet Size (in): 4.25
  • Outlet Size (mm): 108
  • Overall Height (cm): 44
  • Overall Height (in): 17.5
  • Overall Height (mm): 445
  • Overall Length (cm): 51
  • Overall Length (in): 20.1
  • Overall Length (mm): 511
  • Overall Width (cm): 44
  • Overall Width (in): 17.2
  • Overall Width (mm): 437
  • Power Rating (HP): 0.25
  • Power Rating (kW): 0.19
  • Power Rating (W): 186
  • Pump Speed (RPM): 2-11
$10,150.00
Picture of Solotech St23 Pump, I23-Hac-Cs-Hs-A1-A1-0

Solotech St23 Pump, I23-Hac-Cs-Hs-A1-A1-0

GG 19Z063

GG 19Z063

Solotech St23 Pump, I23-Hac-Cs-Hs-A1-A1-0
$10,190.00
Picture of Solotech St26 Pump, I26-Mpm-Ep-Pv-A1-A1-0

Solotech St26 Pump, I26-Mpm-Ep-Pv-A1-A1-0

GG 19Z069

GG 19Z069

SOLOTECH ST26 PUMP, I26-MPM-EP-PV-A1-A1-0

Graco 19Z069 SoloTech i26 EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & BLDC Motor

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i26
  • Application: Industrial
  • Barb Material: PVDF
  • Flow Rate (GPM): 10.2
  • Gear Ratio: 38.23:1
  • Hose Diameter (cm): 2.6
  • Hose Diameter (in): 1
  • Hose Diameter (mm): 26
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 2.5
  • Inlet Size (in): 1
  • Inlet Size (mm): 25
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 9.8
  • Maximum Flow Rate (L/min): 37.1
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.257
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Brushless DC
  • Outlet Size (cm): 2.5
  • Outlet Size (in): 1
  • Outlet Size (mm): 25
  • Overall Height (cm): 41
  • Overall Height (in): 16
  • Overall Height (mm): 406
  • Overall Length (cm): 93
  • Overall Length (in): 36.8
  • Overall Length (mm): 935
  • Overall Width (cm): 55
  • Overall Width (in): 21.7
  • Overall Width (mm): 551
  • Power Rating (HP): 350
  • Power Rating (kW): 261
  • Power Rating (W): 260995
  • Pump Speed (RPM): 2-94
$12,800.00
Picture of Solotech St26 Pump, I26-Hac-Cs-Ss-A1-A1-0

Solotech St26 Pump, I26-Hac-Cs-Ss-A1-A1-0

GG 19Z074

GG 19Z074

SOLOTECH ST26 PUMP, I26-HAC-CS-SS-A1-A1-0

Graco 19Z074 SoloTech i26 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, 316 Stainless Steel Barb & AC Motor

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i26
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 10.175
  • Gear Ratio: 19.50:1
  • Hose Diameter (cm): 2.6
  • Hose Diameter (in): 1
  • Hose Diameter (mm): 26
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 2.5
  • Inlet Size (in): 1
  • Inlet Size (mm): 25
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 9.8
  • Maximum Flow Rate (L/min): 37.1
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 1.7
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: High Speed AC
  • Outlet Size (cm): 2.5
  • Outlet Size (in): 1
  • Outlet Size (mm): 25
  • Overall Height (cm): 42
  • Overall Height (in): 16.5
  • Overall Height (mm): 419
  • Overall Length (cm): 92
  • Overall Length (in): 36.1
  • Overall Length (mm): 917
  • Overall Width (cm): 55
  • Overall Width (in): 21.7
  • Overall Width (mm): 551
  • Power Rating (HP): 2
  • Power Rating (kW): 1.49
  • Power Rating (W): 1491
  • Pump Speed (RPM): 16-93
$11,970.00
Picture of Solotech St26 Pump, I26-Hac-Ep-Hs-A1-A1-0

Solotech St26 Pump, I26-Hac-Ep-Hs-A1-A1-0

GG 19Z080

GG 19Z080

SOLOTECH ST26 PUMP, I26-HAC-EP-HS-A1-A1-0

Graco 19Z080 SoloTech i26 High Speed EPDM Peristaltic Hose Pump with EPDM Hose, Hastelloy-C Barb & AC Motor

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i26
  • Application: Industrial
  • Barb Material: Hastelloy
  • Flow Rate (GPM): 10.175
  • Gear Ratio: 19.50:1
  • Hose Diameter (cm): 2.6
  • Hose Diameter (in): 1
  • Hose Diameter (mm): 26
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 2.5
  • Inlet Size (in): 1
  • Inlet Size (mm): 25
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 9.8
  • Maximum Flow Rate (L/min): 37.1
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 1.7
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: High Speed AC
  • Outlet Size (cm): 2.5
  • Outlet Size (in): 1
  • Outlet Size (mm): 25
  • Overall Height (cm): 42
  • Overall Height (in): 16.5
  • Overall Height (mm): 419
  • Overall Length (cm): 92
  • Overall Length (in): 36.1
  • Overall Length (mm): 917
  • Overall Width (cm): 55
  • Overall Width (in): 21.7
  • Overall Width (mm): 551
  • Power Rating (HP): 2
  • Power Rating (kW): 1.49
  • Power Rating (W): 1491
  • Pump Speed (RPM): 16-93
$13,240.00
Picture of Solotech St26 Pump, I26-Lac-Ep-Ss-A1-A1-0

Solotech St26 Pump, I26-Lac-Ep-Ss-A1-A1-0

GG 19Z083

GG 19Z083

SOLOTECH ST26 PUMP, I26-LAC-EP-SS-A1-A1-0

Graco 19Z083 SoloTech i26 Low Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & AC Motor

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i26
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 1.354
  • Gear Ratio: 145:1
  • Hose Diameter (cm): 2.6
  • Hose Diameter (in): 1
  • Hose Diameter (mm): 26
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 2.5
  • Inlet Size (in): 1
  • Inlet Size (mm): 25
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 9.8
  • Maximum Flow Rate (L/min): 37.1
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.225
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Low Speed AC
  • Outlet Size (cm): 2.5
  • Outlet Size (in): 1
  • Outlet Size (mm): 25
  • Overall Height (cm): 39
  • Overall Height (in): 15.5
  • Overall Height (mm): 394
  • Overall Length (cm): 84
  • Overall Length (in): 33
  • Overall Length (mm): 838
  • Overall Width (cm): 55
  • Overall Width (in): 21.7
  • Overall Width (mm): 551
  • Power Rating (HP): 0.33
  • Power Rating (kW): 0.25
  • Power Rating (W): 246
  • Pump Speed (RPM): 2-12
$11,010.00
Picture of Solotech St26 Pump, I26-Lac-Cs-Pv-A1-A1-0

Solotech St26 Pump, I26-Lac-Cs-Pv-A1-A1-0

GG 19Z085

GG 19Z085

SOLOTECH ST26 PUMP, I26-LAC-CS-PV-A1-A1-0

Graco 19Z085 SoloTech i26 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & AC Motor

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i26
  • Application: Industrial
  • Barb Material: PVDF
  • Flow Rate (GPM): 1.354
  • Gear Ratio: 145:1
  • Hose Diameter (cm): 2.6
  • Hose Diameter (in): 1
  • Hose Diameter (mm): 26
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 2.5
  • Inlet Size (in): 1
  • Inlet Size (mm): 25
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 9.8
  • Maximum Flow Rate (L/min): 37.1
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.225
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Low Speed AC
  • Outlet Size (cm): 2.5
  • Outlet Size (in): 1
  • Outlet Size (mm): 25
  • Overall Height (cm): 39
  • Overall Height (in): 15.5
  • Overall Height (mm): 394
  • Overall Length (cm): 84
  • Overall Length (in): 33
  • Overall Length (mm): 838
  • Overall Width (cm): 55
  • Overall Width (in): 21.7
  • Overall Width (mm): 551
  • Power Rating (HP): 0.33
  • Power Rating (kW): 0.25
  • Power Rating (W): 246
  • Pump Speed (RPM): 2-12
$11,560.00
Picture of Solotech St26 Pump, I26-Mac-Ep-Ss-A1-A1-0

Solotech St26 Pump, I26-Mac-Ep-Ss-A1-A1-0

GG 19Z091

GG 19Z091

SOLOTECH ST26 PUMP, I26-MAC-EP-SS-A1-A1-0

Graco 19Z091 SoloTech i26 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel & AC Motor

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i26
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 4.175
  • Gear Ratio: 48:1
  • Hose Diameter (cm): 2.6
  • Hose Diameter (in): 1
  • Hose Diameter (mm): 26
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 2.5
  • Inlet Size (in): 1
  • Inlet Size (mm): 25
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 9.8
  • Maximum Flow Rate (L/min): 37.1
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.695
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Mid Speed AC
  • Outlet Size (cm): 2.5
  • Outlet Size (in): 1
  • Outlet Size (mm): 25
  • Overall Height (cm): 42
  • Overall Height (in): 16.5
  • Overall Height (mm): 419
  • Overall Length (cm): 86
  • Overall Length (in): 33.9
  • Overall Length (mm): 861
  • Overall Width (cm): 55
  • Overall Width (in): 21.7
  • Overall Width (mm): 551
  • Power Rating (HP): 1
  • Power Rating (kW): 0.75
  • Power Rating (W): 746
  • Pump Speed (RPM): 6-38
$11,560.00
Picture of Solotech St26 Pump, I26-Mac-Cs-Pv-A1-A1-0

Solotech St26 Pump, I26-Mac-Cs-Pv-A1-A1-0

GG 19Z093

GG 19Z093

SOLOTECH ST26 PUMP, I26-MAC-CS-PV-A1-A1-0

Graco 19Z093 SoloTech i26 Mid Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & AC Motor

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Application: Peristaltic Hose Pumps for Industrial Metering and Transfer
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages

  • Model: SoloTech
  • Series: i26
  • Application: Industrial
  • Barb Material: PVDF
  • Flow Rate (GPM): 4.175
  • Gear Ratio: 48:1
  • Hose Diameter (cm): 2.6
  • Hose Diameter (in): 1
  • Hose Diameter (mm): 26
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 2.5
  • Inlet Size (in): 1
  • Inlet Size (mm): 25
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 9.8
  • Maximum Flow Rate (L/min): 37.1
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.695
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Mid Speed AC
  • Outlet Size (cm): 2.5
  • Outlet Size (in): 1
  • Outlet Size (mm): 25
  • Overall Height (cm): 42
  • Overall Height (in): 16.5
  • Overall Height (mm): 419
  • Overall Length (cm): 86
  • Overall Length (in): 33.9
  • Overall Length (mm): 861
  • Overall Width (cm): 55
  • Overall Width (in): 21.7
  • Overall Width (mm): 551
  • Power Rating (HP): 1
  • Power Rating (kW): 0.75
  • Power Rating (W): 746
  • Pump Speed (RPM): 6-38
$12,270.00
Picture of Solotech St30 Pump, Mpm/Ep/Ss/A1/A1/0/

Solotech St30 Pump, Mpm/Ep/Ss/A1/A1/0/

GG 19Z099

GG 19Z099

SOLOTECH ST30 PUMP, MPM/EP/SS/A1/A1/0/

Graco 19Z099 SoloTech i30 EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & BLDC Motor

Graco’s SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

  • Pump Construction
    • Cast aluminum housing reduces pump weight
    • Improved mounting flexibility with adjustable feet
  • Electric Motor
    • Choose between AC and Brushless DC models
    • Multiple gearbox offerings to meet your exact flow rate needs
    • Hazardous location motors available
  • Brushless DC Motor
    • Batch dispense mode
    • Wider turndown ratio allows for larger flow range
    • Maintenance reminders
  • Removable Cover
    • Aluminum covers with larger sight window makes it easy to access and see internal parts
    • Optional leak detector kit mounts on cover
  • Hose Barb Assembly
    • Easy to install or remove – no special tools needed
    • Available with PVDF and SST barbs options
    • Floating flange for easy installation
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages
  • Extended hose life - only one hose compression per revolution

  • Model: SoloTech
  • Series: i30
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 16.025
  • Gear Ratio: 36.61:1
  • Hose Diameter (cm): 3
  • Hose Diameter (in): 1.2
  • Hose Diameter (mm): 30
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 3.2
  • Inlet Size (in): 1-1/4
  • Inlet Size (mm): 32
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 15.8
  • Maximum Flow Rate (L/min): 59.8
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.43
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Brushless DC
  • Outlet Size (cm): 12.5
  • Outlet Size (in): 4.92
  • Outlet Size (mm): 125
  • Overall Height (cm): 47
  • Overall Height (in): 18.5
  • Overall Height (mm): 470
  • Overall Length (cm): 103
  • Overall Length (in): 40.4
  • Overall Length (mm): 1026
  • Overall Width (cm): 59
  • Overall Width (in): 23.3
  • Overall Width (mm): 592
  • Power Rating (HP): 300
  • Power Rating (kW): 224
  • Power Rating (W): 223710
  • Pump Speed (RPM): 2-92
$15,070.00
Picture of Solotech St30 Pump, Mpm/Cs/Pv/A1/A1/0/

Solotech St30 Pump, Mpm/Cs/Pv/A1/A1/0/

GG 19Z101

GG 19Z101

SOLOTECH ST30 PUMP, MPM/CS/PV/A1/A1/0/

Graco 19Z101 SoloTech i30 Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & BLDC Motor

Graco’s SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

  • Pump Construction
    • Cast aluminum housing reduces pump weight
    • Improved mounting flexibility with adjustable feet
  • Electric Motor
    • Choose between AC and Brushless DC models
    • Multiple gearbox offerings to meet your exact flow rate needs
    • Hazardous location motors available
  • Brushless DC Motor
    • Batch dispense mode
    • Wider turndown ratio allows for larger flow range
    • Maintenance reminders
  • Removable Cover
    • Aluminum covers with larger sight window makes it easy to access and see internal parts
    • Optional leak detector kit mounts on cover
  • Hose Barb Assembly
    • Easy to install or remove – no special tools needed
    • Available with PVDF and SST barbs options
    • Floating flange for easy installation
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages
  • Extended hose life - only one hose compression per revolution

  • Model: SoloTech
  • Series: i30
  • Application: Industrial
  • Barb Material: PVDF
  • Flow Rate (GPM): 16.025
  • Gear Ratio: 36.61:1
  • Hose Diameter (cm): 3
  • Hose Diameter (in): 1.2
  • Hose Diameter (mm): 30
  • Hose Material: CSM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 3.2
  • Inlet Size (in): 1-1/4
  • Inlet Size (mm): 32
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 15.8
  • Maximum Flow Rate (L/min): 59.8
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.43
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Brushless DC
  • Outlet Size (cm): 12.5
  • Outlet Size (in): 4.92
  • Outlet Size (mm): 125
  • Overall Height (cm): 47
  • Overall Height (in): 18.5
  • Overall Height (mm): 470
  • Overall Length (cm): 103
  • Overall Length (in): 40.4
  • Overall Length (mm): 1026
  • Overall Width (cm): 59
  • Overall Width (in): 23.3
  • Overall Width (mm): 592
  • Power Rating (HP): 300
  • Power Rating (kW): 224
  • Power Rating (W): 223710
  • Pump Speed (RPM): 2-92
$16,650.00
Picture of Solotech St30 Pump, Mpm/Ep/Pv/A1/A1/0/

Solotech St30 Pump, Mpm/Ep/Pv/A1/A1/0/

GG 19Z102

GG 19Z102

SOLOTECH ST30 PUMP, MPM/EP/PV/A1/A1/0/

Graco 19Z102 SoloTech i30 EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & BLDC Motor

Graco’s SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

  • Pump Construction
    • Cast aluminum housing reduces pump weight
    • Improved mounting flexibility with adjustable feet
  • Electric Motor
    • Choose between AC and Brushless DC models
    • Multiple gearbox offerings to meet your exact flow rate needs
    • Hazardous location motors available
  • Brushless DC Motor
    • Batch dispense mode
    • Wider turndown ratio allows for larger flow range
    • Maintenance reminders
  • Removable Cover
    • Aluminum covers with larger sight window makes it easy to access and see internal parts
    • Optional leak detector kit mounts on cover
  • Hose Barb Assembly
    • Easy to install or remove – no special tools needed
    • Available with PVDF and SST barbs options
    • Floating flange for easy installation
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages
  • Extended hose life - only one hose compression per revolution

  • Model: SoloTech
  • Series: i30
  • Application: Industrial
  • Barb Material: PVDF
  • Flow Rate (GPM): 16.025
  • Gear Ratio: 36.61:1
  • Hose Diameter (cm): 3
  • Hose Diameter (in): 1.2
  • Hose Diameter (mm): 30
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 3.2
  • Inlet Size (in): 1-1/4
  • Inlet Size (mm): 32
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 15.8
  • Maximum Flow Rate (L/min): 59.8
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 0.43
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Brushless DC
  • Outlet Size (cm): 12.5
  • Outlet Size (in): 4.92
  • Outlet Size (mm): 125
  • Overall Height (cm): 47
  • Overall Height (in): 18.5
  • Overall Height (mm): 470
  • Overall Length (cm): 103
  • Overall Length (in): 40.4
  • Overall Length (mm): 1026
  • Overall Width (cm): 59
  • Overall Width (in): 23.3
  • Overall Width (mm): 592
  • Power Rating (HP): 300
  • Power Rating (kW): 224
  • Power Rating (W): 223710
  • Pump Speed (RPM): 2-92
$15,430.00
Picture of Solotech St30 Pump, Mac/Ep/Ss/A1/A1/0/

Solotech St30 Pump, Mac/Ep/Ss/A1/A1/0/

GG 19Z107

GG 19Z107

SOLOTECH ST30 PUMP, MAC/EP/SS/A1/A1/0/

Graco 19Z107 SoloTech i30 Mid Speed EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & AC Motor

Graco’s SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

  • Pump Construction
    • Cast aluminum housing reduces pump weight
    • Improved mounting flexibility with adjustable feet
  • Electric Motor
    • Choose between AC and Brushless DC models
    • Multiple gearbox offerings to meet your exact flow rate needs
    • Hazardous location motors available
  • Brushless DC Motor
    • Batch dispense mode
    • Wider turndown ratio allows for larger flow range
    • Maintenance reminders
  • Removable Cover
    • Aluminum covers with larger sight window makes it easy to access and see internal parts
    • Optional leak detector kit mounts on cover
  • Hose Barb Assembly
    • Easy to install or remove – no special tools needed
    • Available with PVDF and SST barbs options
    • Floating flange for easy installation
  • More flow per revolution than conventional designs
  • Inexpensive to maintain - no valves, seals or glands
  • Pumps are reversible and can be used to empty lines or clear blockages
  • Extended hose life - only one hose compression per revolution

  • Model: SoloTech
  • Series: i30
  • Application: Industrial
  • Barb Material: Stainless Steel
  • Flow Rate (GPM): 6.56
  • Gear Ratio: 48:1
  • Hose Diameter (cm): 3
  • Hose Diameter (in): 1.2
  • Hose Diameter (mm): 30
  • Hose Material: EPDM
  • Housing Material: Powder Coated Aluminum
  • Inlet Size (cm): 3.2
  • Inlet Size (in): 1-1/4
  • Inlet Size (mm): 32
  • Inlet Thread Type: Flange
  • Maximum Flow Rate (GPM): 15.8
  • Maximum Flow Rate (L/min): 59.8
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Fluid Pressure (bar): 9
  • Maximum Fluid Pressure (kPa): 900
  • Maximum Fluid Pressure (psi): 125
  • Maximum Storage Temperature (°C): 40
  • Maximum Storage Temperature (°F): 104
  • Minimum Flow Rate (GPM): 1.09
  • Minimum Storage Temperature (°C): -10
  • Minimum Storage Temperature (°F): 14
  • Motor Type: Mid Speed AC
  • Outlet Size (cm): 12.5
  • Outlet Size (in): 4.92
  • Outlet Size (mm): 125
  • Overall Height (cm): 74
  • Overall Height (in): 29.1
  • Overall Height (mm): 739
  • Overall Length (cm): 67
  • Overall Length (in): 26.5
  • Overall Length (mm): 673
  • Overall Width (cm): 59
  • Overall Width (in): 23.3
  • Overall Width (mm): 592
  • Power Rating (HP): 1.5
  • Power Rating (kW): 1.12
  • Power Rating (W): 1119
  • Pump Speed (RPM): 6-37
$13,590.00
Refine
×
Manufacturer