Transfer
Solotech St26 Pump, H26-Ln-Fg-Ss-A1-A1-0
GG 19D092
SOLOTECH ST26 PUMP, H26-LN-FG-SS-A1-A1-0
Graco 19D092 SoloTech h26 Peristaltic Pump, Low-speed gear reducer no motor, NEMA, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h26
- Barb Material: 316 Stainless Steel
- Gear Ratio: 128.51:1
- Hose Diameter (cm): 2.5
- Hose Diameter (in): 0.98
- Hose Diameter (mm): 26
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 5.1
- Inlet Size (in): 2.0
- Inlet Size (mm): 50.8
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 5.1
- Outlet Size (in): 2.0
- Outlet Size (mm): 50.8
- Overall Height (cm): 39.37
- Overall Height (in): 15.5
- Overall Height (mm): 393.7
- Overall Length (cm): 83.8
- Overall Length (in): 33
- Overall Length (mm): 838.2
- Overall Width (cm): 55
- Overall Width (in): 21.7
- Overall Width (mm): 551
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St26 Pump, H26-Hc-Fg-Ss-A1-A1-0
GG 19D093
SOLOTECH ST26 PUMP, H26-HC-FG-SS-A1-A1-0
Graco 19D093 SoloTech h26 Peristaltic Pump, High-speed gear reducer no motor, IEC, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h26
- Barb Material: 316 Stainless Steel
- Gear Ratio: 19.27:1
- Hose Diameter (cm): 2.5
- Hose Diameter (in): 0.98
- Hose Diameter (mm): 26
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 5.1
- Inlet Size (in): 2.0
- Inlet Size (mm): 50.8
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 5.1
- Outlet Size (in): 2.0
- Outlet Size (mm): 50.8
- Overall Height (cm): 42
- Overall Height (in): 16.5
- Overall Height (mm): 419
- Overall Length (cm): 91.7
- Overall Length (in): 36.1
- Overall Length (mm): 916.9
- Overall Width (cm): 55
- Overall Width (in): 21.7
- Overall Width (mm): 551
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St26 Pump, H26-Mc-Fg-Ss-A1-A1-0
GG 19D095
SOLOTECH ST26 PUMP, H26-MC-FG-SS-A1-A1-0
Graco 19D095 SoloTech h26 Peristaltic Pump, High-speed gear reducer no motor, NEMA, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h26
- Barb Material: 316 Stainless Steel
- Gear Ratio: 47.02:1
- Hose Diameter (cm): 2.5
- Hose Diameter (in): 0.98
- Hose Diameter (mm): 26
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 5.1
- Inlet Size (in): 2.0
- Inlet Size (mm): 50.8
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 5.1
- Outlet Size (in): 2.0
- Outlet Size (mm): 50.8
- Overall Height (cm): 42
- Overall Height (in): 16.5
- Overall Height (mm): 419
- Overall Length (cm): 86.1
- Overall Length (in): 33.9
- Overall Length (mm): 861.1
- Overall Width (cm): 55
- Overall Width (in): 21.7
- Overall Width (mm): 551
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St26 Pump, H26-Mn-Fg-Ss-A1-A1-0
GG 19D096
SOLOTECH ST26 PUMP, H26-MN-FG-SS-A1-A1-0
Graco 19D096 SoloTech h26 Peristaltic Pump, Med-speed gear reducer no motor, IEC, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h26
- Barb Material: 316 Stainless Steel
- Gear Ratio: 47.02:1
- Hose Diameter (cm): 2.5
- Hose Diameter (in): 0.98
- Hose Diameter (mm): 26
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 5.1
- Inlet Size (in): 2.0
- Inlet Size (mm): 50.8
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Mid Speed, NEMA Gearbox Only
- Outlet Size (cm): 5.1
- Outlet Size (in): 2.0
- Outlet Size (mm): 50.8
- Overall Height (cm): 42
- Overall Height (in): 16.5
- Overall Height (mm): 419
- Overall Length (cm): 86.1
- Overall Length (in): 33.9
- Overall Length (mm): 861.1
- Overall Width (cm): 55
- Overall Width (in): 21.7
- Overall Width (mm): 551
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St26 Pump, H26-Lac-Fg-Ss-A1-A1-0
GG 19D098
SOLOTECH ST26 PUMP, H26-LAC-FG-SS-A1-A1-0
Graco 19D098 SoloTech h26 Peristaltic Pump, 0.3 hp AC motor with low-speed gear reducer, .23-.1.4 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h26
- Barb Material: 316 Stainless Steel
- Gear Ratio: 159.1:1
- Hose Diameter (cm): 2.5
- Hose Diameter (in): 0.98
- Hose Diameter (mm): 26
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 5.1
- Inlet Size (in): 2.0
- Inlet Size (mm): 50.8
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 74.04
- Maximum Flow Rate (GPM): 1.234
- Maximum Flow Rate (L/h): 280.27
- Maximum Flow Rate (L/min): 4.67
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 11.32
- Minimum Flow Rate (GPM): 0.21
- Minimum Pump Speed (RPM): 1.89
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Low Speed AC
- Outlet Size (cm): 5.1
- Outlet Size (in): 2.0
- Outlet Size (mm): 50.8
- Overall Height (cm): 39.37
- Overall Height (in): 15.5
- Overall Height (mm): 393.7
- Overall Length (cm): 83.8
- Overall Length (in): 33
- Overall Length (mm): 838.2
- Overall Width (cm): 55
- Overall Width (in): 21.7
- Overall Width (mm): 551
- Power Rating (HP): 0.3
- Power Rating (kW): 0.25
Solotech St26 Pump, H26-Mac-Fg-Ss-A1-A1-0
GG 19D099
SOLOTECH ST26 PUMP, H26-MAC-FG-SS-A1-A1-0
Graco 19D099 SoloTech h26 Peristaltic Pump, 1 hp AC motor with med-speed gear reducer, .69-4.2 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h26
- Barb Material: 316 Stainless Steel
- Gear Ratio: 44.19:1
- Hose Diameter (cm): 2.5
- Hose Diameter (in): 0.98
- Hose Diameter (mm): 26
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 5.1
- Inlet Size (in): 2.0
- Inlet Size (mm): 50.8
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 266.4
- Maximum Flow Rate (GPM): 4.44
- Maximum Flow Rate (L/h): 1008.43
- Maximum Flow Rate (L/min): 17
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 40.73
- Minimum Flow Rate (GPM): 0.74
- Minimum Pump Speed (RPM): 6.76
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Mid Speed AC
- Outlet Size (cm): 5.1
- Outlet Size (in): 2.0
- Outlet Size (mm): 50.8
- Overall Height (cm): 42
- Overall Height (in): 16.5
- Overall Height (mm): 419
- Overall Length (cm): 86.1
- Overall Length (in): 33.9
- Overall Length (mm): 861.1
- Overall Width (cm): 55
- Overall Width (in): 21.7
- Overall Width (mm): 551
- Power Rating (HP): 1
- Power Rating (kW): 0.75
Solotech St26 Pump, H26-0-Fg-Ss-A1-A1-0
GG 19D100
SOLOTECH ST26 PUMP, H26-0-FG-SS-A1-A1-0
Graco 19D100 SoloTech h26 Peristaltic Pump, No Motor or gear reducer, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h26
- Barb Material: 316 Stainless Steel
- Gear Ratio: 0
- Hose Diameter (cm): 2.5
- Hose Diameter (in): 0.98
- Hose Diameter (mm): 26
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 5.1
- Inlet Size (in): 2.0
- Inlet Size (mm): 50.8
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: None
- Outlet Size (cm): 5.1
- Outlet Size (in): 2.0
- Outlet Size (mm): 50.8
- Overall Height (cm): 42
- Overall Height (in): 16.5
- Overall Height (mm): 419
- Overall Length (cm): 0
- Overall Length (in): 0
- Overall Length (mm): 0
- Overall Width (cm): 55
- Overall Width (in): 21.7
- Overall Width (mm): 551
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St10 Pump, H10-Lc-Fg-Ss-A1-A1-0
GG 19D102
SOLOTECH ST10 PUMP, H10-LC-FG-SS-A1-A1-0
Graco 19D102 SoloTech h10 Peristaltic Pump, Low-speed gear reducer no motor, IEC, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h10
- Barb Material: 316 Stainless Steel
- Gear Ratio: 0
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.39
- Hose Diameter (mm): 10
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1.0
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 2.5
- Outlet Size (in): 1.0
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St10 Pump, H10-Ln-Fg-Ss-A1-A1-0
GG 19D103
SOLOTECH ST10 PUMP, H10-LN-FG-SS-A1-A1-0
Graco 19D103 SoloTech h10 Peristaltic Pump, Low-speed gear reducer no motor, NEMA, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h10
- Barb Material: 316 Stainless Steel
- Gear Ratio: 0
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.39
- Hose Diameter (mm): 10
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1.0
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 2.5
- Outlet Size (in): 1.0
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St10 Pump, H10-Hc-Fg-Ss-A1-A1-0
GG 19D104
SOLOTECH ST10 PUMP, H10-HC-FG-SS-A1-A1-0
Graco 19D104 SoloTech h10 Peristaltic Pump, High-speed gear reducer no motor, IEC, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h10
- Barb Material: 316 Stainless Steel
- Gear Ratio: 0
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.39
- Hose Diameter (mm): 10
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1.0
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 2.5
- Outlet Size (in): 1.0
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St10 Pump, H10-Hn-Fg-Ss-A1-A1-0
GG 19D105
SOLOTECH ST10 PUMP, H10-HN-FG-SS-A1-A1-0
Graco 19D105 SoloTech h10 Peristaltic Pump, High-speed gear reducer no motor, NEMA, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h10
- Barb Material: 316 Stainless Steel
- Gear Ratio: 0
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.39
- Hose Diameter (mm): 10
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1.0
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 2.5
- Outlet Size (in): 1.0
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St10 Pump, H10-Mc-Fg-Ss-A1-A1-0
GG 19D106
SOLOTECH ST10 PUMP, H10-MC-FG-SS-A1-A1-0
Graco 19D106 SoloTech h10 Peristaltic Pump, Med-speed gear reducer no motor, IEC, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h10
- Barb Material: 316 Stainless Steel
- Gear Ratio: 0
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.39
- Hose Diameter (mm): 10
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1.0
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Mid Speed, IEC Gearbox Only
- Outlet Size (cm): 2.5
- Outlet Size (in): 1.0
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St10 Pump, H10-Lac-Fg-Ss-A1-A1-0
GG 19D108
SOLOTECH ST10 PUMP, H10-LAC-FG-SS-A1-A1-0
Graco 19D108 SoloTech h10 Peristaltic Pump, 0.25 hp AC motor with low-speed gear reducer, .01-.08 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h10
- Barb Material: 316 Stainless Steel
- Gear Ratio: 120:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.39
- Hose Diameter (mm): 10
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1.0
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 6.3
- Maximum Flow Rate (GPM): 0.105
- Maximum Flow Rate (L/h): 23.85
- Maximum Flow Rate (L/min): 0.40
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 15
- Minimum Flow Rate (GPM): 0.01
- Minimum Pump Speed (RPM): 2.5
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Low Speed AC
- Outlet Size (cm): 2.5
- Outlet Size (in): 1.0
- Outlet Size (mm): 25.4
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0.25
- Power Rating (kW): 0.19
Solotech St10 Pump, H10-Mac-Fg-Ss-A1-A1-0
GG 19D109
SOLOTECH ST10 PUMP, H10-MAC-FG-SS-A1-A1-0
Graco 19D109 SoloTech h10 Peristaltic Pump, 0.5 hp AC motor with med-speed gear reducer, .04-.26 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h10
- Barb Material: 316 Stainless Steel
- Gear Ratio: 48:1
- Hose Diameter (cm): 1
- Hose Diameter (in): 0.39
- Hose Diameter (mm): 10
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.5
- Inlet Size (in): 1.0
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 15.75
- Maximum Flow Rate (GPM): 0.2625
- Maximum Flow Rate (L/h): 59.62
- Maximum Flow Rate (L/min): 0.99
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 37.5
- Minimum Flow Rate (GPM): 0.04
- Minimum Pump Speed (RPM): 6.26
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Mid Speed AC
- Outlet Size (cm): 2.5
- Outlet Size (in): 1.0
- Outlet Size (mm): 25.4
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 440
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0.5
- Power Rating (kW): 0.37
Solotech St16 Pump, H16-Lc-Fg-Ss-A1-A1-0
GG 19D146
SOLOTECH ST16 PUMP, H16-LC-FG-SS-A1-A1-0
Graco 19D146 SoloTech h16 Peristaltic Pump, Low-speed gear reducer no motor, IEC, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h16
- Barb Material: 316 Stainless Steel
- Gear Ratio: 128.7:1
- Hose Diameter (cm): 1.6
- Hose Diameter (in): 0.63
- Hose Diameter (mm): 16
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.54
- Inlet Size (in): 1
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Low Speed, IEC Gearbox Only
- Outlet Size (cm): 2.54
- Outlet Size (in): 1
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St16 Pump, H16-Ln-Fg-Ss-A1-A1-0
GG 19D147
SOLOTECH ST16 PUMP, H16-LN-FG-SS-A1-A1-0
Graco 19D147 SoloTech h16 Peristaltic Pump, Low-speed gear reducer no motor, NEMA, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h16
- Barb Material: 316 Stainless Steel
- Gear Ratio: 128.7:1
- Hose Diameter (cm): 1.6
- Hose Diameter (in): 0.63
- Hose Diameter (mm): 16
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.54
- Inlet Size (in): 1
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Low Speed, NEMA Gearbox Only
- Outlet Size (cm): 2.54
- Outlet Size (in): 1
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St16 Pump, H16-Hc-Fg-Ss-A1-A1-0
GG 19D148
SOLOTECH ST16 PUMP, H16-HC-FG-SS-A1-A1-0
Graco 19D148 SoloTech h16 Peristaltic Pump, High-speed gear reducer no motor, IEC, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h16
- Barb Material: 316 Stainless Steel
- Gear Ratio: 19.56:1
- Hose Diameter (cm): 1.6
- Hose Diameter (in): 0.63
- Hose Diameter (mm): 16
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.54
- Inlet Size (in): 1
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: High Speed, IEC Gearbox Only
- Outlet Size (cm): 2.54
- Outlet Size (in): 1
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St16 Pump, H16-Hn-Fg-Ss-A1-A1-0
GG 19D149
SOLOTECH ST16 PUMP, H16-HN-FG-SS-A1-A1-0
Graco 19D149 SoloTech h16 Peristaltic Pump, High-speed gear reducer no motor, NEMA, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h16
- Barb Material: 316 Stainless Steel
- Gear Ratio: 19.56:1
- Hose Diameter (cm): 1.6
- Hose Diameter (in): 0.63
- Hose Diameter (mm): 16
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.54
- Inlet Size (in): 1
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 0
- Maximum Flow Rate (GPM): 0
- Maximum Flow Rate (L/h): 0
- Maximum Flow Rate (L/min): 0
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 0
- Minimum Flow Rate (GPM): 0
- Minimum Pump Speed (RPM): 0
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: High Speed, NEMA Gearbox Only
- Outlet Size (cm): 2.54
- Outlet Size (in): 1
- Outlet Size (mm): 25.4
- Overall Height (cm): 17.78
- Overall Height (in): 7
- Overall Height (mm): 177.8
- Overall Length (cm): 41.1
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0
- Power Rating (kW): 0
Solotech St16 Pump, H16-Lac-Fg-Ss-A1-A1-0
GG 19D152
SOLOTECH ST16 PUMP, H16-LAC-FG-SS-A1-A1-0
Graco 19D152 SoloTech h16 Peristaltic Pump, 0.25 hp AC motor with low-speed gear reducer, .01-.08 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h16
- Barb Material: 316 Stainless Steel
- Gear Ratio: 120:1
- Hose Diameter (cm): 1.6
- Hose Diameter (in): 0.63
- Hose Diameter (mm): 16
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.54
- Inlet Size (in): 1
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 6.3
- Maximum Flow Rate (GPM): 0.105
- Maximum Flow Rate (L/h): 23.85
- Maximum Flow Rate (L/min): 0.40
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 15
- Minimum Flow Rate (GPM): 0.018
- Minimum Pump Speed (RPM): 2.5
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Low Speed AC
- Outlet Size (cm): 2.54
- Outlet Size (in): 1
- Outlet Size (mm): 25.4
- Overall Height (cm): 42
- Overall Height (in): 16.7
- Overall Height (mm): 424
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0.25
- Power Rating (kW): 0.19
Solotech St16 Pump, H16-Mac-Fg-Ss-A1-A1-0
GG 19D153
SOLOTECH ST16 PUMP, H16-MAC-FG-SS-A1-A1-0
Graco 19D153 SoloTech h16 Peristaltic Pump, 0.75 hp AC motor with med-speed gear reducer, .04-.26 gpm, FDA Nitrile Hose, SST Sanitary Clamp Barb
With only the hose in contact with the fluid being pumped and no check valves in line, Graco's SoloTech peristaltic pumps are ideal for materials other pumps can't handle.
Application: For metering and dosing flavorants, colorants, solids, abrasives, and slurries for food, beverage, and personal care products.- Single Roller Design
- The single roller compresses an engineered hose through a full 360 degrees of rotation. This reduces compressions, temperature, and friction, improving hose life.
- Hose Design
- SoloTech customers routinely experience fewer failures and perform much less maintenance compared to other pump technology.
- Hose Barb Assembly
- Easy to install or remove – no special tools needed
- 316 SST sanitary clamp design for easy cleaning
- Pump Construction
- Powder-coated aluminum housing reduces pump weight
- Improved mounting flexibility with adjustable feet
- Pumps are reversible and can be used to empty lines or clear blockages
- Model: SoloTech
- Series: h16
- Barb Material: 316 Stainless Steel
- Gear Ratio: 48:1
- Hose Diameter (cm): 1.6
- Hose Diameter (in): 0.63
- Hose Diameter (mm): 16
- Hose Material: FDA Nitrile
- Housing Material: Powder Coated Aluminum
- Inlet Size (cm): 2.54
- Inlet Size (in): 1
- Inlet Size (mm): 25.4
- Inlet Thread Type: Tri-Clamp
- Lubricant Material: FDA Glycerin
- Maximum Flow Rate (GPH): 15.75
- Maximum Flow Rate (GPM): 0.2625
- Maximum Flow Rate (L/h): 59.62
- Maximum Flow Rate (L/min): 0.99
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Fluid Pressure (bar): 8.6
- Maximum Fluid Pressure (kPa): 861.8
- Maximum Fluid Pressure (psi): 125
- Maximum Operating Temperature (°C): 40
- Maximum Operating Temperature (°F): 104
- Maximum Pump Speed (RPM): 37.5
- Minimum Flow Rate (GPM): 0.044
- Minimum Pump Speed (RPM): 6.26
- Minimum Temperature (°C): -10
- Minimum Temperature (°F): 14
- Motor Type: Mid Speed AC
- Outlet Size (cm): 2.54
- Outlet Size (in): 1
- Outlet Size (mm): 25.4
- Overall Height (cm): 44
- Overall Height (in): 17.3
- Overall Height (mm): 439
- Overall Length (cm): 41
- Overall Length (in): 16.2
- Overall Length (mm): 411
- Overall Width (cm): 33
- Overall Width (in): 13
- Overall Width (mm): 330
- Power Rating (HP): 0.75
- Power Rating (kW): 0.37