Transfer

View as Grid List

Sort by

Display items per page

Lower, Assembly, 75Cc

GG 16U917

Lower, Assembly, 75Cc

$2,260.00

CHECK-MATE PUMP, 38:1 1200/060 CS SD

GG P38LCS

CHECK-MATE PUMP, 38:1 1200/060 CS SD

Graco P38LCS 38:1 - 60cc Check-Mate Pump with NXT 1200 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials to metering and dispensing systems. Maximize your plant&prime, s production capacity.

Application: Long-lasting durability - Check-Mate pumps are a time-tested, proven performer

NXT 1200 Air Motor
Low Noise
Modular design for easier maintenance
Highest technology air motor on the market
60cc Check-Mate Lower
Severe Duty coatings on rods and cylinder Extends production time
Standard Threaded Coupler -
Replaceable Seat
Minimizes service costs
Cast Outlet and Inlet Housing
- NEW Xtreme® Coupler
  - Replaceable Outlet Fitting
    - Piston Valve with Floating Piston Seal
      - Replaceable Seat
        Minimizes service costs
        Floating Priming Plate
        Provides uniform flow
        Cast Outlet and Inlet Housing
        Improves structural integrity
        NEW Cartridge Throat Packings
        Allows for easy servicing without removing from ram
        Modular Air Valve
        De-icing controls
        Up to 50% quieter than previous models
        Modular air valve - eliminates stalling, easy-to-repair
        Hard Part Coatings
        Standard Severe Duty™ coating on rods and cylinder maximizes wear life
        
        Model: Check-Mate
        Ambient/Warm Melt/Hot Melt: Ambient
        Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
        Fluid Outlet Size (in): 3/4
        Fluid Outlet Thread Gender: Male
        Fluid Outlet Thread Type: NPT
        Includes: Motor, Displacement Pump, Washer (6), Screw
        Material: Carbon Steel
        Maximum Working Pressure (bar): 262
        Maximum Working Pressure (kPa): 26200
        Maximum Working Pressure (MPa): 26.2
        Maximum Working Pressure (psi): 3800
        Power Type: Pneumatic
        Pump Ratio: 38:1

$7,960.00

Gemini Ii Pail Mount Pkg

BB 98-3200

Gemini Ii Pail Mount Pkg

$4,774.00

Dx70Pf Pump

BB 98-3221

Dx70Pf Pump

$2,732.00

Dx70Pfa Pump

BB 98-3224

Dx70Pfa Pump

$3,538.00

SOLOTECH ST10 PUMP, I10-LAC-CS-HS-A1-A1-0

GG 19Z012

SOLOTECH ST10 PUMP, I10-LAC-CS-HS-A1-A1-0

SoloTech™ i10 Low Speed Hypalon Peristaltic Hose Pump with CSM Hose, Hastelloy-C Barb & AC Motor

Graco’s SoloTech 10 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Peristaltic Hose Pumps for Industrial Metering and Transfer More flow per revolution than conventional designs Inexpensive to maintain - no valves, seals or glands Pumps are reversible and can be used to empty lines or clear blockages Extended hose life - only one hose compression per revolution

$7,940.00

SOLOTECH ST10 PUMP, I10-MAC-BN-SS-A1-A1-0

GG 19Z020

SOLOTECH ST10 PUMP, I10-MAC-BN-SS-A1-A1-0

SoloTech™ i10 Mid Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & AC Motor

$6,400.00

SOLOTECH ST23 PUMP, I23-MPM-EP-SS-A1-A1-0

GG 19Z036

SOLOTECH ST23 PUMP, I23-MPM-EP-SS-A1-A1-0

SoloTech™ i23 EPDM Peristaltic Hose Pump with EPDM Hose, 316 Stainless Steel Barb & BLDC Motor

Graco’s SoloTech 23 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

$9,640.00

SOLOTECH ST23 PUMP, I23-MPM-EP-PV-A1-A1-0

GG 19Z037

SOLOTECH ST23 PUMP, I23-MPM-EP-PV-A1-A1-0

SoloTech™ i23 EPDM Peristaltic Hose Pump with EPDM Hose, PVDF Barb & BLDC Motor

$9,930.00

SOLOTECH ST23 PUMP, I23-MAC-NR-SS-A1-A1-0

GG 19Z049

SOLOTECH ST23 PUMP, I23-MAC-NR-SS-A1-A1-0

SoloTech™ i23 Mid Speed Natural Rubber Peristaltic Hose Pump with Natural Rubber, 316 Stainless Steel Barb & AC Motor

$8,110.00

SOLOTECH ST26 PUMP, I26-HAC-BN-SS-A1-A1-0

GG 19Z076

SOLOTECH ST26 PUMP, I26-HAC-BN-SS-A1-A1-0

SoloTech™ i26 High Speed Buna-N Peristaltic Hose Pump with Nitrile Hose, 316 Stainless Steel Barb & AC Motor

Graco’s SoloTech 26 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

$11,560.00

SOLOTECH ST30 PUMP, HAC/CS/PV/A1/A1/0/

GG 19Z117

SOLOTECH ST30 PUMP, HAC/CS/PV/A1/A1/0/

Graco 19Z117 SoloTech™ i30 High Speed Hypalon Peristaltic Hose Pump with CSM Hose, PVDF Barb & AC Motor

Graco’s SoloTech 30 Hose pump design utilizes a single roller that compresses an engineered hose through a full 360 degrees of rotation. This innovative design means longer hose life when pumping caustic, abrasive or sensitive materials for metering or transfer.

Pump Construction
- Electric Motor
  - Brushless DC Motor
    - Removable Cover
      - Hose Barb Assembly
        Easy to install or remove – no special tools needed
        Available with PVDF and SST barbs options
        Floating flange for easy installation
        More flow per revolution than conventional designs
        Inexpensive to maintain - no valves, seals or glands
        Pumps are reversible and can be used to empty lines or clear blockages
        Extended hose life - only one hose compression per revolution
        
        Model: SoloTech
        Series: i30
        Application: Industrial
        Barb Material: PVDF
        Flow Rate (GPM): 16
        Gear Ratio: 19.5:1
        Hose Diameter (cm): 3
        Hose Diameter (in): 1.2
        Hose Diameter (mm): 30
        Hose Material: CSM
        Housing Material: Powder Coated Aluminum
        Inlet Size (cm): 3.2
        Inlet Size (in): 1-1/4
        Inlet Size (mm): 32
        Inlet Thread Type: Flange
        Maximum Flow Rate (GPM): 15.8
        Maximum Flow Rate (L/min): 59.8
        Maximum Fluid Pressure (bar): 9
        Maximum Fluid Pressure (kPa): 900
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 9
        Maximum Fluid Pressure (kPa): 900
        Maximum Fluid Pressure (psi): 125
        Maximum Storage Temperature (°C): 40
        Maximum Storage Temperature (°F): 104
        Minimum Flow Rate (GPM): 2.675
        Minimum Storage Temperature (°C): -10
        Minimum Storage Temperature (°F): 14
        Motor Type: High Speed AC
        Outlet Size (cm): 12.5
        Outlet Size (in): 4.92
        Outlet Size (mm): 125
        Overall Height (cm): 77
        Overall Height (in): 30.3
        Overall Height (mm): 770
        Overall Length (cm): 67
        Overall Length (in): 26.5
        Overall Length (mm): 673
        Overall Width (cm): 59
        Overall Width (in): 23.3
        <

$15,110.00

BULLDOG PUMP, BOP 43:1

GG 218334

BULLDOG PUMP, BOP 43:1

Graco 218334 Bulldog® 43:1 Hydraulic Supply Pump

The Bulldog 43:1 air-powered pump, with its efficient, large ported air valve, is the highest-performing in its class. Downtime is minimized by an air motor design that has been developed and tested for more than 10 million cycles of operation.

Application: Supplies hydraulic oil to accumulators in oil rig blow-out prevention systems.

Model: Bulldog

Air Inlet Size (in): 0.75
Air Inlet Size (mm): 12.7
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPSM
Application: Industrial
Compatible Material: Oil
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT
Fluid Outlet Size (in): 3/4
Fluid Outlet Size (mm): 19.05
Fluid Outlet Thread Gender: Female
For Use With: Petroleum- and syntheticbased oils (motor, gear, hydraulic and ATF)
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Flow Rate (GPM): 26.5
Maximum Flow Rate (L/min): 100.31
Maximum Working Pressure (bar): 301
Maximum Working Pressure (kPa): 30100
Maximum Working Pressure (MPa): 30.1
Maximum Working Pressure (psi): 4300
Pump Ratio: 43:1

$15,240.00

KIT, COMPLETE, SST T3, AIR/FLUID

GG 24Z987

KIT, COMPLETE, SST T3, AIR/FLUID

T3 Complete Package: Includes 2 Pumps (Stainless Steel), 2 Supply Hoses, Air Supply Kit and Desicant Dryer kit

Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco’s proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump – using less air pressure to provide the same fluid pressure required.

Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig. More quiet – Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump. Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor.

$6,010.00

E-FLO PUMP, 1HP, 750, ADV, TRI, SLD

GG EC1B40

E-FLO PUMP, 1HP, 750, ADV, TRI, SLD

Graco EC1B40 E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp

E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility.

Advanced model lets you easily connect and manage multiple pumps with a single control module.
Integrated runaway protection prevents pump from premature wear and costly material loss.
Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime.
Meets requirements of these approval agencies: ATEX, FM, IECEx
Pump can run alone to keep production running, if lower maintenance is required.

Fluid Inlet Size (in): 1.5
Fluid Inlet Size (mm): 38.1
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: Tri-Clamp
Fluid Inlet Type: Tri-Clamp

Fluid Outlet Size (in): 1.5
Fluid Outlet Size (mm): 3.81
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: Tri-Clamp
Fluid Section Type: 4-Ball, Sealed Bellows
Includes: Advanced Control Input, No Mounting
Maximum Continuous Cycle Rate (CPM): 20
Maximum Operating Temperature (°C): 40
Maximum Operating Temperature (°F): 104
Maximum Voltage (V ac): 480
Maximum Working Pressure (bar): 26
Maximum Working Pressure (kPa): 2600
Maximum Working Pressure (MPa): 2.6
Maximum Working Pressure (psi): 377
Minimum Operating Temperature (°C): 0
Minimum Operating Temperature (°F): 32
Minimum Voltage (V ac): 380
Overall Depth (cm): 50.5
Overall Depth (in): 19.88
Overall Depth (mm): 505
Overall Height (cm): 138.5
Overall Height (in): 54.53
Overall Height (mm): 1385
Overall Width (cm): 43.2
Overall Width (in): 17
Overall Width (mm): 432

$19,930.00

E-FLO PUMP, 1HP, 750, ADV, TRI, SLD, STD

GG EC1B41

E-FLO PUMP, 1HP, 750, ADV, TRI, SLD, STD

Graco EC1B41 E-Flo DC 4-Ball Electric Circulation Pump, 750cc, 1 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Stand

Advanced model lets you easily connect and manage multiple pumps with a single control module.
Minimal pulsation at changeover provides a more consistent finish.
Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime.
Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.
Meets requirements of these approval agencies: ATEX, FM, IECEx

Fluid Inlet Size (in): 1.5
Fluid Inlet Size (mm): 38.1
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: Tri-Clamp
Fluid Inlet Type: Tri-Clamp

Fluid Outlet Size (in): 1.5
Fluid Outlet Size (mm): 3.81
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: Tri-Clamp
Fluid Section Type: 4-Ball, Sealed Bellows
Includes: Advanced Control Input, Stand
Maximum Continuous Cycle Rate (CPM): 20
Maximum Operating Temperature (°C): 40
Maximum Operating Temperature (°F): 104
Maximum Voltage (V ac): 480
Maximum Working Pressure (bar): 26
Maximum Working Pressure (kPa): 2600
Maximum Working Pressure (MPa): 2.6
Maximum Working Pressure (psi): 377
Minimum Operating Temperature (°C): 0
Minimum Operating Temperature (°F): 32
Minimum Voltage (V ac): 380
Overall Depth (cm): 50.5
Overall Depth (in): 19.88
Overall Depth (mm): 505
Overall Height (cm): 147.3
Overall Height (in): 57.99
Overall Height (mm): 1473
Overall Width (cm): 43.2
Overall Width (in): 17
Overall Width (mm): 432

$20,860.00

E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, STND

GG EC3D41

E-FLO PUMP, 2HP, 1500, ADV, TRI, SLD, STND

E-Flo DC 4-Ball Electric Circulation Pump, 1500cc, 2 HP, 480V, Advanced, ATEX/FM/IECEx, Sealed Lower, Ultralife Rod/Cylinder, Tri-Clamp, Stand E-Flo DC (Dual Control) electric pumps are up to five times more efficient than pneumatic pumps, lowering energy bills and saving money. Unique 4-ball lower minimizes pulsation while increasing flow rates. Advanced control module improves performance with Intelligent Paint Kitchen (IPK) compatibility. Advanced model lets you easily connect and manage multiple pumps with a single control module. Quiet electric motor exceeds OSHA sound regulations, meaning happier operators and better results. Sealed lower does not require throat seal liquid (TSL), reducing maintenance costs and unplanned downtime. Ultralife ceramic coatings on rod and cylinder hold up to the harshest materials, including waterborne. Lower operates independently, allowing the pump to adjust to varying pressure and flow rate demands thousands of times per second. Installation simply requires 220 volt single phase power. No VFD (variable frequency drive) needed.

$30,230.00

E-FLO SP SUPPLY UNIT, D60, CM100SM, SP, 240V, ADM

GG EMC4163

E-FLO SP SUPPLY UNIT, D60, CM100SM, SP, 240V, ADM

E-Flo SP 20L 3 in (7.6 cm) Supply, 100cc MaxLife® Check-Mate Stainless Steel, Flat Stainless Steel Platen, Single PTFE Wiper, 240V The E-Flo SP electric supply pump is designed for industrial and automotive sealant and adhesive application. This advanced pump will drastically increase efficiency, improve system control capabilities, optimize process performance, and provide critical performance data. Improve process and system performance Advanced material control Significant energy savings Eliminate compressed air usage Extremely quiet motor Prevent downtime Lower maintenance costs

$40,400.00

E-FLO SP SUPPLY UNIT, D60, CM200SM, SP, 480V, ADM

GG EMC8164

E-FLO SP SUPPLY UNIT, D60, CM200SM, SP, 480V, ADM

Graco EMC8164 E-Flo SP 20L 3 in. Supply, 200cc MaxLife® Check-Mate Stainless Steel, Flat Stainless Steel Platen, Single PTFE Wiper, 480V

The E-Flo SP electric supply pump is designed for industrial and automotive sealant and adhesive application. This advanced pump will drastically increase efficiency, improve system control capabilities, optimize process performance, and provide critical performance data.

Improve process and system performance
Advanced material control
Significant energy savings
Extremely quiet motor
Prevent downtime
Lower maintenance costs

Display Type: ADM
Drum Size (Gal): 5
Drum Size (L): 20

Maximum Working Pressure (psi): 3900
Platen Material: Stainless Steel
Platen Size (Gal): 5
Platen Size (L): 20
Platen Style: Single Wiper
Pump Material: Stainless Steel Maxlife
Pump Size (cc): 200
Pump Type: Check-Mate
Ram Post Diameter (in): 3

$52,990.00

HIGH-FLO PUMP, 4000, LN DT, SLD, TRI

GG JS33B8

HIGH-FLO PUMP, 4000, LN DT, SLD, TRI

High-Flo 4-Ball Pump, SST, 3.3:1, Low Noise, DataTrak, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints De-icing controls eliminate stalling Rugged body armor, won’t rust or dent DataTrak tracks material usage, monitors and protects your pump

$36,180.00

HIGH-FLO PUMP, XL34/2000, LN, SLD, TRI

GG JS35A8

HIGH-FLO PUMP, XL34/2000, LN, SLD, TRI

High-Flo 4-Ball Pump, SST, 3.5:1, Low Noise XL, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints De-icing controls eliminate stalling Rugged body armor, won’t rust or dent

$19,560.00

HIGH-FLO PUMP, XL34/2000, LN, DT, SLD, TRI

GG JS35B8

HIGH-FLO PUMP, XL34/2000, LN, DT, SLD, TRI

Graco JS35B8 High-Flo 4-Ball Pump, SST, 3.5:1, Low Noise, DataTrak, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp

Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.

Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies
Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
Rugged body armor, won’t rust or dent
DataTrak tracks material usage, monitors and protects your pump

Model: High-Flo
Series: 4-Ball

Application: Circulation
Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC
Fluid Outlet Size (in): 1.5
Fluid Outlet Size (mm): 38.1
Fluid Section Type: Sealed
Includes: Stainless Steel Pump, Low Noise Exhaust, DataTrak Monitor, Tri-Clamp Fittings, Ultralife Rod, Ultralife Cylinder
Material: Stainless Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 20
Maximum Flow Rate (GPM): 10.6
Maximum Flow Rate (L/min): 40
Maximum Operating Temperature (°C): 60
Maximum Operating Temperature (°F): 140
Maximum Working Pressure (bar): 24.1
Maximum Working Pressure (kPa): 2410
Maximum Working Pressure (MPa): 2.4
Maximum Working Pressure (psi): 350
Motor Type: Low Noise with DataTrak
Portable: Non-Portable
Pump Ratio: 3.5:1

$21,940.00

HIGH-FLO PUMP, 2200/1000, LOW N, SLD, TRI

GG JS40L8

HIGH-FLO PUMP, 2200/1000, LOW N, SLD, TRI

Graco JS40L8 High-Flo 4-Ball Pump, SST, 4:1, Low Noise Exhaust, Sealed SST Lower, Tri-Clamp Fittings, Ultralife Rod/Cylinder

Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.

Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies
Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
Rugged body armor, won’t rust or dent

Model: High-Flo
Series: 4-Ball

Application: Circulation
Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC
Fluid Outlet Size (in): 1-1/2
Fluid Outlet Size (mm): 38.1
Fluid Section Type: Sealed
Includes: Stainless Steel Pump, Low Noise Exhaust, Tri-Clamp Fittings, Ultralife Rod, Ultralife Cylinder
Material: Stainless Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 20
Maximum Flow Rate (GPM): 16.9
Maximum Flow Rate (L/min): 63.97
Maximum Operating Temperature (°C): 66
Maximum Operating Temperature (°F): 150
Maximum Working Pressure (bar): 28
Maximum Working Pressure (kPa): 2800
Maximum Working Pressure (MPa): 2.8
Maximum Working Pressure (psi): 400
Motor Type: Low Noise NXT
Portable: Non-Portable
Pump Ratio: 4:1

$15,740.00

HIGH-FLO PUMP, 3000, LN, SLD, TRI

GG JS44A8

HIGH-FLO PUMP, 3000, LN, SLD, TRI

High-Flo 4-Ball Pump, SST, 4.4:1, Low Noise XL, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations. Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints De-icing controls eliminate stalling Rugged body armor, won’t rust or dent

$32,210.00

HIGH-FLO PUMP, 3000, LN DT, SLD, TRI

GG JS44B8

HIGH-FLO PUMP, 3000, LN DT, SLD, TRI

Graco JS44B8 High-Flo 4-Ball Pump, SST, 4.4:1, Low Noise, DataTrak, Sealed SST Lower, Ultralife Rod/Cylinder, Tri-Clamp

Pneumatic High-Flo 4-ball piston pumps provide high output per cycle to reduce pump wear and maintenance. Ideal for low pressure, high flow applications and inherently safe for hazardous locations.

Slow-moving reciprocating motion does not damage paint like other rotary pumping technologies
Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
Rugged body armor, won’t rust or dent
DataTrak tracks material usage, monitors and protects your pump

Model: High-Flo
Series: 4-Ball

Application: Circulation
Compatible Material: Waterborne, Solvent borne, High Solids, Xirallic, Metallics, Topcoats, Stains, Varnish, CARC
Fluid Outlet Size (in): 1.5
Fluid Outlet Size (mm): 38.1
Fluid Section Type: Sealed
Includes: Stainless Steel Pump, Low Noise Exhaust, DataTrak Monitor, Tri-Clamp Fittings, Ultralife Rod, Ultralife Cylinder
Material: Stainless Steel
Maximum Air Inlet Pressure (bar): 6.9
Maximum Air Inlet Pressure (kPa): 690
Maximum Air Inlet Pressure (psi): 100
Maximum Continuous Cycle Rate (CPM): 20
Maximum Flow Rate (GPM): 15.9
Maximum Flow Rate (L/min): 60
Maximum Operating Temperature (°C): 60
Maximum Operating Temperature (°F): 140
Maximum Working Pressure (bar): 30.3
Maximum Working Pressure (kPa): 3030
Maximum Working Pressure (MPa): 3
Maximum Working Pressure (psi): 440
Motor Type: Low Noise with DataTrak
Portable: Non-Portable
Pump Ratio: 4.4:1

$35,290.00

Refine