GRACO INC. S10595

GG 262371

GG 262381

PROCONTROL 1KS PROPORTIONER, PROMX, REMTE

Graco 262381 ProControl 1KS with G3000 Meter

Maintain a closed loop flow control system for a superior finish with the same proven technology as the ProMix 2KS

• Single Component Flow Control
• Integrated Flushing
• Optional Color Change Modules

• Model: ProControl
• Series: 1KS

• Air Inlet Size (cm): 0.9525
• Air Inlet Size (in): 3/8
• Air Inlet Size (mm): 9.525
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Amperage (A): 2

• Fluid Inlet Size (cm): 0.635
• Fluid Inlet Size (in): 1/4
• Fluid Inlet Size (mm): 6.35
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 1/4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Frequency (Hz): 50/60

• Includes: ProControl 1KS Module, G3000 Meter

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (cc/min): 3790

• Maximum Flow Rate (GPM): 1
• Maximum Flow Rate (L/min): 3.79

• Maximum Fluid Viscosity (cP): 5000

• Maximum Fluid Viscosity (cP): 5000

• Maximum Number of Colors: Up to 30

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Maximum Working Pressure (bar): 275.8
• Maximum Working Pressure (kPa): 27580
• Maximum Working Pressure (MPa): 27.6
• Maximum Working Pressure (psi): 4000

• Minimum Flow Rate (cc/min): 75
• Minimum Flow Rate (GPM): 0.02
• Minimum Flow Rate (L/min): 0.075

• Minimum Fluid Viscosity (cP): 20

GG 262398

MANIFOLD, MIX, PLURAL COMPONENT

Graco 262398 Fluid Mix Manifold for ProMix 2KE Proportioner, Sequential Dosing

GG 262399

MANIFOLD, MIX PLURAL COMPONENT

• Compatible Material: Waterborne, Solventborne, High Solids, Xirallic, CARC, Metallics, Topcoats, Stains, Varnish, UV Coating

GG 262412

GG 262483

GG 262484

GG 262522

GG 262549

REGULATOR, MASTIC

GG 262561

GG 262572

REACTOR A-25 PROPORTIONER, BARE

Graco 262572 Reactor A-25 Bare Proportioner

The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you're spraying at maximum flow rates - resulting in better quality foam.

• Maintains temperature setpoints for better yield
• Maintains consistent output pressure for uniform spray pattern
• Easy to operate and maintain
• DataTrak Control
  • Resettable counter tracks material usage
• Three Heat Zones
  • Three independent heat zones - ISO, resin and hose heat
  • Provide accurate heat control for reliable spraying to handle different chemical viscosities
  • Digital temperature controls
• Recirculation Manifold
  • A quick, easy way to balance system pressures
• NXT Air Motor
  • Low air consumption for increased efficiency
  • Muffler provides low operating noise levels
  • Air valve provides smooth and rapid changeover
• Quick Knockdown Lower Pumps
  • For easy disassembly and maintenance
• ISO Pump Lube System
  • Prevents isocyanate crystallization on the pump seal and shaft
• ISO Pump Lube System
  • Prevents isocyanate crystallization on the pump seal and shaft

• Model: Reactor
• Series: A-25

• Air Inlet Size (cm): 1.27
• Air Inlet Size (in): 1/2
• Air Inlet Size (mm): 12.7
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Amperage (A): 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase)
• Application: Spray Foam
• Applicator Type: Manual

• Compatible Material: Plural-Component

• Component A Inlet Size (in): 3/4
• Component A Inlet Size (mm): 19.05
• Component A Thread Gender: Female
• Component A Thread Type: NPT
• Component B Inlet Size (in): 3/4
• Component B Inlet Size (mm): 19.05
• Component B Thread Gender: Female
• Component B Thread Type: NPT
• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Type: No Gun

• Includes: Proportioner, Heated Hose

• Material Application: Polyurethane Foam

• Maximum Air Consumption (SCFM): 28 scfm at 1500 psi
• Maximum Air Inlet Pressure (bar): 8.62
• Maximum Air Inlet Pressure (kPa): 862
• Maximum Air Inlet Pressure (psi): 125

• Maximum Flow Rate (kg/min): 11.34
• Maximum Flow Rate (lb/min): 25

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190
• Maximum Fluid Viscosity (cP): 1500

• Maximum Fluid Temperature ( degree C): 88
• Maximum Fluid Temperature ( degree F): 190
• Maximum Fluid Viscosity (cP): 1500

• Maximum Hose Length (ft): 210
• Maximum Hose Length (m): 64

• Maximum Mix Ratio: 1:1

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 14
• Maximum Working Pressure (psi): 2000

• Minimum Fluid Viscosity (cP): 250

• Overall Depth (cm): 62.2

GG 262573

GG 262614

REACTOR A-25 PROPORTIONER, WHEELS, CYCLE COUNT

Graco 262614 Reactor A-25 Proportioner with Wheels, DataTrak

The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when youre spraying at maximum flow rates - resulting in better quality foam.

• Maintains temperature setpoints for better yield
• Maintains consistent output pressure for uniform spray pattern
• Easy-to-service fluid section reduces maintenance and increases productivity
• DataTrak Control

  Resettable counter tracks material usage

• Three Heat Zones

  Three independent heat zones - ISO, resin and hose heat

  Provide accurate heat control for reliable spraying to handle different chemical viscosities

  Digital temperature controls

  • Recirculation Manifold

    A quick, easy way to balance system pressures

  • NXT Air Motor

    Low air consumption for increased efficiency

    Muffler provides low operating noise levels

    Air valve provides smooth and rapid changeover

    • Quick Knockdown Lower Pumps

      For easy disassembly and maintenance

    • ISO Pump Lube System

      Prevents isocyanate crystallization on the pump seal and shaft

    • ISO Pump Lube System

      Prevents isocyanate crystallization on the pump seal and shaft

    
    

    • Model: Reactor
    • Series: A-25
    • Air Inlet Size (cm): 1.27
    • Air Inlet Size (in): 1/2
    • Air Inlet Size (mm): 12.7
    • Air Inlet Thread Gender: Female
    • Air Inlet Thread Type: NPT
    • Amperage (A): 18.5 @ 380 V ac (3-Phase WYE), 32 @ 230 V ac (3-Phase Delta), 40 @ 230 V ac (1-Phase)
    • Application: Spray Foam
    • Applicator Type: Manual
    • Compatible Material: Plural Components
    • Component A Inlet Size (in): 3/4
    • Component A Inlet Size (mm): 19.05
    • Component A Thread Gender: Female
    • Component A Thread Type: NPT
    • Component B Inlet Size (in): 3/4
    • Component B Inlet Size (mm): 19.05
    • Component B Thread Gender: Female
    • Component B Thread Type: NPT
    • Component Type: Two Component
    • Flush Type: Solvent
    • Frequency (Hz): 50/60
    • Gun Type: No Gun
    • Includes: Proportioner, Heated Hose, Wheels, DataTrak
    • Material Application: Polyurethane Foam
    • Maximum Air Consumption (SCFM): 28 scfm at 1500 psi
    • Maximum Air Inlet Pressure (bar): 8.62
    • Maximum Air Inlet Pressure (kPa): 862
    • Maximum Air Inlet Pressure (MPa): 0.86
    • Maximum Air Inlet Pressure (psi): 125
    • Maximum Flow Rate (kg/min): 11.34
    • Maximum Flow Rate (lb/min): 25
    • Maximum Fluid Temperature ( degree C): 88
    • Maximum Fluid Temperature ( degree F): 190
    • Maximum Fluid Viscosity (cP): 1500
    • Maximum Fluid Temperature ( degree C): 88
    • Maximum Fluid Temperature ( degree F): 190
    • Maximum Fluid Viscosity (cP): 1500
    • Maximum Hose Length (ft): 210
    • Maximum Hose Length (m): 64
    • Maximum Mix Ratio: 1:1
    • Maximum Working Pressure (bar): 138
    • Maximum Working

GG 262696

GG 262697

GG 262699

KIT,AIR CAP,VERTICAL

Graco 262699 Vertical Air Cap Kit

KIT INCLUDES: AIR CAP, ASM, VERT, EXTERNAL MIX [QTY. 1], KIT INCLUDES: AIR CAP, ASM, HORIZ, EXTERNAL MIX [QTY. 1],

GG 262711

GG 262700

KIT,AIR CAP,HORIZONTAL

Graco 262700 Horizontal Air Cap Kit

KIT INCLUDES: AIR CAP, ASM, HORIZ, EXTERNAL MIX [QTY. 1], KIT INCLUDES: AIR CAP, ASM, INTERNAL MIX [QTY. 1],

GG 262740

GG 262805

MAGNUM SPRAYER, X7

Graco 262805 Magnum X7 Electric TrueAirless Sprayer

DIY homeowners and handymen will save time and money with the Magnum X7 with built-in cart. Tackle any interior project, exterior houses, fences and decks. The X7 supports a larger tip size for spraying heavier coatings and the convenient cart makes any painting project faster and easier.

• Hardened Stainless Steel Piston Pump - Delivers high pressure power to spray unthinned paints
• Flexible Suction Hose - Spray directly from 1 or 5 gallon paint container
• Convenient Cart - Easily move sprayer around on the job
• TrueAirless Spray Tip with SoftSpray Technology - greater control and less overspray with a wide range of coatings
• Power Flush Adapter - Connects to a garden hose for fast and easy cleaning
• PushPrime - Fast and reliable start-up every time
• Adjustable Pressure Control - Easy control of paint flow

• Model: Magnum
• Series: X7
• Product Series: Project

• Amperage (A): 9.0

• Compatible Tip Size (in): 0.009, 0.011, 0.013, 0.015, 0.017

• Engine Size (HP): 0.625

• Fluid Outlet Size (in): 1/4
• Fluid Outlet Size (mm): 6.35
• Fluid Outlet Thread Type: NPSM

• Frame Configuration: Cart

• Includes: SG2 Spray Gun, TrueAirless 515 Spray Tip, Spray Tip Guard, 1/4 in x 25 ft DuraFlex Hose, Pump Armor Storage Fluid (8 oz), Quick Start-Up Guide
• Inlet Paint Strainer: 35 Mesh Stainless Steel Screen

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.2

• Maximum Hose Length (ft): 100
• Maximum Hose Length (m): 30

• Maximum Tip Size (in): 0.017
• Maximum Tip Size Gun 1 (in): 0.017

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

• Minimum Generator Power (W): 2500

• Motor Type: Universal

• Number of Guns: 1

• Overall Height (cm): 94.0
• Overall Height (in): 37.0
• Overall Height (mm): 940
• Overall Length (cm): 49
• Overall Length (in): 19.3
• Overall Length (mm): 490
• Overall Width (cm): 38.9
• Overall Width (in): 15.3
• Overall Width (mm): 389

• Phase: 1

• Power Rating (HP): 0.625
• Power Rating (kW): 0.47
• Power Rating (W): 466
• Power Source: Electric
• Pressure Control Type: Adjustable

• Pump Rod Type: Hardened Stainless Steel
• Pump Sleeve Material: Stainless Steel

• Recommended Annual Usage (gal): 125

GG 262854

XHF GUN, SPRAY

Graco 262854 XHF Airless Spray Gun, XHD RAC Tip

Designed to spray high viscosity materials, the XHF Gun is rugged, reliable and easy to maintain.

• High-flow, high pressure gun
• Handles epoxy intumescent materials, high-viscosity coatings, fiber filled materials
• Reduced clogging means more productivity and uptime

• Applicator Type: Manual

• Compatible Material: Epoxy Intumescent Fireproofing

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT
• Fluid Orifice Size (cm): 0.32
• Fluid Orifice Size (in): 0.125
• Fluid Orifice Size (mm): 3.2

• For Use With: Protective Coating High-Pressure Equipment

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Airless Gun
• Gun Weight (g): 720
• Gun Weight (kg): 0.72
• Gun Weight (lb): 1.6
• Gun Weight (oz): 25

• Includes: XHD RAC Guard, XHD429 SwitchTip

• Maximum Fluid Pressure (bar): 500
• Maximum Fluid Pressure (kPa): 50000
• Maximum Fluid Pressure (MPa): 50
• Maximum Fluid Pressure (psi): 7250

• Maximum Fluid Pressure (bar): 500
• Maximum Fluid Pressure (kPa): 50000
• Maximum Fluid Pressure (MPa): 50
• Maximum Fluid Pressure (psi): 7250

• Maximum Fluid Working Pressure (bar): 500
• Maximum Fluid Working Pressure (MPa): 50
• Maximum Fluid Working Pressure (psi): 7250

• Overall Height (cm): 17.8
• Overall Height (in): 7.0
• Overall Height (mm): 178
• Overall Length (cm): 21
• Overall Length (in): 8.25
• Overall Length (mm): 210

• Product Type: Spray Gun

• Purge Method: Liquid

GG 262929

G40 GUN, ASSY, AA, RAC TIP

Graco 262929 G40 Air-Assisted Airless Gun

Designed to maximize efficiency and quality, G40 air-assist spray guns use the highest quality components for long lasting reliable performance. The AAF tip line is designed for soft spray and improved transfer efficiency.

• High quality air-assisted spraying in a variety of applications
• All tips have a ring to retain the tip in the aircap
• Designed to minimize wear of replacement parts
• Trigger pull force is ultra-light, reducing operator fatigue and muscle stress

• Model: G40

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder

• Compatible Material: Lacquer, Latex, Plural Component Materials, Polyurethane, Solvent borne, Urethane, UV Coating, Varnish, Waterborne

• Feed Type: Pressure Feed

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Air-Assisted Gun
• Gun Weight (g): 16
• Gun Weight (oz): 16

• Includes: RAC X FF LP Spray Tip

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 280
• Maximum Fluid Pressure (kPa): 28000
• Maximum Fluid Pressure (MPa): 28.0
• Maximum Fluid Pressure (psi): 4000
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 110

• Maximum Fluid Pressure (bar): 280
• Maximum Fluid Pressure (kPa): 28000
• Maximum Fluid Pressure (MPa): 28.0
• Maximum Fluid Pressure (psi): 4000
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 110

• Minimum Flow Rate @ PSI (oz/min): 5

• Product Type: Spray Gun

GG 262942

GG 269211

CONTRACTOR FLAT TIP, SPRAY 211

Graco 269211 Contractor Flat Tip, 211

The 211 Contractor Flat Tip is designed for narrower surfaces and thin materials. The 211 Flat Tip has a 0.011 inch orifice and produces a 4 to 6 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 10
• Maximum Fan Width (in): 4
• Maximum Fan Width (mm): 152

• Maximum Flow Rate (GPM): 0.12
• Maximum Flow Rate (L/min): 0.45

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 4
• Minimum Fan Width (mm): 102

• Orifice Diameter (in): 0.011

• Pattern Size (in): 4 to 6
• Pattern Size (mm): 101.6 to 152.4

GG 269213

CONTRACTOR FLAT TIP, SPRAY

Graco 269213 Contractor Flat Tip, 213

The 213 Contractor Flat Tip is designed for narrower surfaces. The 213 Flat Tip has a 0.013 inch orifice and produces a 4 to 6 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 10
• Maximum Fan Width (in): 4
• Maximum Fan Width (mm): 152

• Maximum Flow Rate (GPM): 0.18
• Maximum Flow Rate (L/min): 0.68

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 4
• Minimum Fan Width (mm): 102

• Orifice Diameter (in): 0.013

• Pattern Size (in): 4 to 6
• Pattern Size (mm): 101.6 to 152.4

GG 269219

CONTRACTOR FLAT TIP, SPRAY 219

Graco 269219 Contractor Flat Tip, 219

The 219 Contractor Flat Tip is designed for narrower surfaces and thick materials. The 219 Flat Tip has a 0.019 inch orifice and produces a 4 to 6 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 10
• Maximum Fan Width (in): 4
• Maximum Fan Width (mm): 152

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 4
• Minimum Fan Width (mm): 102

• Orifice Diameter (in): 0.019

• Pattern Size (in): 4 to 6
• Pattern Size (mm): 101.6 to 152.4

GG 269327

CONTRACTOR FLAT TIP, SPRAY

Graco 269327 Contractor Flat Tip, 327

The 327 Contractor Flat Tip is designed for narrow surfaces and thicker materials. The 327 Flat Tip has a 0.027 inch orifice and produces a 6 to 8 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 15
• Maximum Fan Width (in): 6
• Maximum Fan Width (mm): 203

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 6
• Minimum Fan Width (mm): 152

• Orifice Diameter (in): 0.027

• Pattern Size (in): 6 to 8
• Pattern Size (mm): 152.4 to 203.2

GG 269615

CONTRACTOR FLAT TIP, SPRAY

Graco 269615 Contractor Flat Tip, 615

The 615 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.015 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.015

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269315

CONTRACTOR FLAT TIP, SPRAY

Graco 269315 Contractor Flat Tip, 315

The 315 Contractor Flat Tip is designed for narrow surfaces. The 315 Flat Tip has a 0.015 inch orifice and produces a 6 to 8 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 15
• Maximum Fan Width (in): 6
• Maximum Fan Width (mm): 203

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 6
• Minimum Fan Width (mm): 152

• Orifice Diameter (in): 0.015

• Pattern Size (in): 6 to 8
• Pattern Size (mm): 152.4 to 203.2

GG 269317

CONTRACTOR FLAT TIP, SPRAY 317

Graco 269317 Contractor Flat Tip, 317

The 317 Contractor Flat Tip is designed for narrow surfaces. The 317 Flat Tip has a 0.017 inch orifice and produces a 6 to 8 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 15
• Maximum Fan Width (in): 6
• Maximum Fan Width (mm): 203

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 6
• Minimum Fan Width (mm): 152

• Orifice Diameter (in): 0.017

• Pattern Size (in): 6 to 8
• Pattern Size (mm): 152.4 to 203.2

GG 269619

CONTRACTOR FLAT TIP, SPRAY

Graco 269619 Contractor Flat Tip, 619

The 619 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.019 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.019

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269325

CONTRACTOR FLAT TIP, SPRAY

Graco 269325 Contractor Flat Tip, 325

The 325 Contractor Flat Tip is designed for narrow surfaces and thicker materials. The 325 Flat Tip has a 0.025 inch orifice and produces a 6 to 8 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 15
• Maximum Fan Width (in): 6
• Maximum Fan Width (mm): 203

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 6
• Minimum Fan Width (mm): 152

• Orifice Diameter (in): 0.025

• Pattern Size (in): 6 to 8
• Pattern Size (mm): 152.4 to 203.2

GG 269417

CONTRACTOR FLAT TIP, SPRAY

Graco 269417 Contractor Flat Tip, 417

The 417 Contractor Flat Tip produces an 8 to 10 inch fan and has a 0.017 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 20
• Maximum Fan Width (in): 8
• Maximum Fan Width (mm): 254

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 8
• Minimum Fan Width (mm): 203

• Orifice Diameter (in): 0.017

• Pattern Size (in): 8 to 10
• Pattern Size (mm): 203.2 to 254

GG 269515

CONTRACTOR FLAT TIP, SPRAY

Graco 269515 Contractor Flat Tip, 515

The 515 Contractor Flat Tip produces a 10 to 12 inch fan and has a 0.015 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.015

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG 269613

CONTRACTOR FLAT TIP, SPRAY 613

Graco 269613 Contractor Flat Tip, 613

The 613 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.013 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.18
• Maximum Flow Rate (L/min): 0.68

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.013

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269525

CONTRACTOR FLAT TIP, SPRAY 525

Graco 269525 Contractor Flat Tip, 525

The 525 Contractor Flat Tip produces a 10 to 12 inch fan and has a 0.025 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.025

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG 269415

CONTRACTOR FLAT TIP, SPRAY

Graco 269415 Contractor Flat Tip, 415

The 415 Contractor Flat Tip produces an 8 to 10 inch fan and has a 0.015 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 20
• Maximum Fan Width (in): 8
• Maximum Fan Width (mm): 254

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 8
• Minimum Fan Width (mm): 203

• Orifice Diameter (in): 0.015

• Pattern Size (in): 8 to 10
• Pattern Size (mm): 203.2 to 254

GG 269523

CONTRACTOR FLAT TIP, SPRAY

Graco 269523 Contractor Flat Tip, 523

The 523 Contractor Flat Tip produces a 10 to 12 inch fan and has a 0.023 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.57
• Maximum Flow Rate (L/min): 2.16

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.023

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG 269217

CONTRACTOR FLAT TIP, SPRAY 217

Graco 269217 Contractor Flat Tip, 217

The 217 Contractor Flat Tip is designed for narrower surfaces. The 217 Flat Tip has a 0.017 inch orifice and produces a 4 to 6 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 10
• Maximum Fan Width (in): 4
• Maximum Fan Width (mm): 152

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 4
• Minimum Fan Width (mm): 102

• Orifice Diameter (in): 0.017

• Pattern Size (in): 4 to 6
• Pattern Size (mm): 101.6 to 152.4

GG 269215

CONTRACTOR FLAT TIP, SPRAY 215

Graco 269215 Contractor Flat Tip, 215

The 215 Contractor Flat Tip is designed for narrower surfaces. The 215 Flat Tip has a 0.015 inch orifice and produces a 4 to 6 inch fan.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 10
• Maximum Fan Width (in): 4
• Maximum Fan Width (mm): 152

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 4
• Minimum Fan Width (mm): 102

• Orifice Diameter (in): 0.015

• Pattern Size (in): 4 to 6
• Pattern Size (mm): 101.6 to 152.4

GG 269617

CONTRACTOR FLAT TIP, SPRAY

Graco 269617 Contractor Flat Tip, 617

The 617 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.017 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.017

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269635

CONTRACTOR FLAT TIP, SPRAY 635

Graco 269635 Contractor Flat Tip, 635

The 635 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.035 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.31
• Maximum Flow Rate (L/min): 4.96

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.035

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269631

CONTRACTOR FLAT TIP, SPRAY 631

Graco 269631 Contractor Flat Tip, 631

The 631 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.031 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 1.03
• Maximum Flow Rate (L/min): 3.90

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.031

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269413

CONTRACTOR FLAT TIP, SPRAY

Graco 269413 Contractor Flat Tip, 413

The 413 Contractor Flat Tip produces an 8 to 10 inch fan and has a 0.013 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 20
• Maximum Fan Width (in): 8
• Maximum Fan Width (mm): 254

• Maximum Flow Rate (GPM): 0.18
• Maximum Flow Rate (L/min): 0.68

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 8
• Minimum Fan Width (mm): 203

• Orifice Diameter (in): 0.013

• Pattern Size (in): 8 to 10
• Pattern Size (mm): 203.2 to 254

GG 269519

CONTRACTOR FLAT TIP, SPRAY

Graco 269519 Contractor Flat Tip, 519

The 519 Contractor Flat Tip produces a 10 to 12 inch fan and has a 0.019 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.019

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG 269621

CONTRACTOR FLAT TIP, SPRAY

Graco 269621 Contractor Flat Tip, 621

The 621 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.021 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Elastomer, Latex Paint, Latex Stain, Oil-Based Paint, Oil-Based Stain

• For Use With: Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12

• Orifice Diameter (in): 0.021

GG 269427

CONTRACTOR FLAT TIP, SPRAY

Graco 269427 Contractor Flat Tip, 427

The 427 Contractor Flat Tip produces an 8 to 10 inch fan and has a 0.027 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 20
• Maximum Fan Width (in): 8
• Maximum Fan Width (mm): 254

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 8
• Minimum Fan Width (mm): 203

• Orifice Diameter (in): 0.027

• Pattern Size (in): 8 to 10
• Pattern Size (mm): 203.2 to 254

GG 269627

CONTRACTOR FLAT TIP, SPRAY 627

Graco 269627 Contractor Flat Tip, 627

The 627 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.027 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.027

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269623

CONTRACTOR FLAT TIP, SPRAY 623

Graco 269623 Contractor Flat Tip, 623

The 623 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.023 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.57
• Maximum Flow Rate (L/min): 2.16

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.023

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269625

CONTRACTOR FLAT TIP, SPRAY

Graco 269625 Contractor Flat Tip, 625

The 625 Contractor Flat Tip produces a 12 to 14 inch fan and has a 0.025 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 30
• Maximum Fan Width (in): 12
• Maximum Fan Width (mm): 356

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 12
• Minimum Fan Width (mm): 305

• Orifice Diameter (in): 0.025

• Pattern Size (in): 12 to 14
• Pattern Size (mm): 304.8 to 355.6

GG 269715

CONTRACTOR FLAT TIP, SPRAY 715

Graco 269715 Contractor Flat Tip, 715

The 715 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.015 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 35
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.015

• Pattern Size (in): 14 to 16
• Pattern Size (mm): 355.6 to 406.4

GG 269717

CONTRACTOR FLAT TIP, SPRAY 717

Graco 269717 Contractor Flat Tip, 717

The 717 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.017 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 35
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.017

• Pattern Size (in): 14 to 16
• Pattern Size (mm): 355.6 to 406.4

GG 269719

CONTRACTOR FLAT TIP, SPRAY 719

Graco 269719 Contractor Flat Tip, 719

The 719 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.019 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 35
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.019

• Pattern Size (in): 14 to 16
• Pattern Size (mm): 355.6 to 406.4

GG 269513

CONTRACTOR FLAT TIP, SPRAY

Graco 269513 Contractor Flat Tip, 513

The 513 Contractor Flat Tip produces a 10 to 12 inch fan and has a 0.013 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 25
• Maximum Fan Width (in): 10
• Maximum Fan Width (mm): 305

• Maximum Flow Rate (GPM): 0.18
• Maximum Flow Rate (L/min): 0.68

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 10
• Minimum Fan Width (mm): 254

• Orifice Diameter (in): 0.013

• Pattern Size (in): 10 to 12
• Pattern Size (mm): 254 to 304.8

GG 269725

CONTRACTOR FLAT TIP, SPRAY

Graco 269725 Contractor Flat Tip, 725

The 725 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.025 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 35
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.025

• Pattern Size (in): 14 to 16
• Pattern Size (mm): 355.6 to 406.4

GG 269819

CONTRACTOR FLAT TIP, SPRAY 819

Graco 269819 Contractor Flat Tip, 819

The 819 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.019 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.019

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 269721

CONTRACTOR FLAT TIP, SPRAY 721

Graco 269721 Contractor Flat Tip, 721

The 721 Contractor Flat Tip produces a 14 to 16 inch fan and has a 0.021 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 35
• Maximum Fan Width (in): 14
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 0.47
• Maximum Flow Rate (L/min): 1.78

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.021

• Pattern Size (in): 14 to 16
• Pattern Size (mm): 355.6 to 406.4

GG 269827

CONTRACTOR FLAT TIP, SPRAY

Graco 269827 Contractor Flat Tip, 827

The 827 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.027 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.027

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 269815

CONTRACTOR FLAT TIP, SPRAY 815

Graco 269815 Contractor Flat Tip, 815

The 815 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.015 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.015

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 269821

CONTRACTOR FLAT TIP, SPRAY 821

Graco 269821 Contractor Flat Tip, 821

The 821 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.021 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.47
• Maximum Flow Rate (L/min): 1.78

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.021

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 269925

CONTRACTOR FLAT TIP, SPRAY

Graco 269925 Contractor Flat Tip, 925

The 925 Contractor Flat Tip produces an 18 to 20 inch (46 to 51 cm) fan and has a 0.025 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 45
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 508

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 18
• Minimum Fan Width (mm): 457

• Orifice Diameter (in): 0.025

• Pattern Size (in): 18 to 20
• Pattern Size (mm): 457.2 to 508

GG 269831

CONTRACTOR FLAT TIP, SPRAY 831

Graco 269831 Contractor Flat Tip, 831

The 831 Contractor Flat Tip produces a 16 to 18 inch fan and has a 0.031 inch orifice.

• Model: Contractor
• Series: Flat Tip

• Compatible Material: Architectural Coating

• For Use With: Silver Plus Airless Spray Gun

• Maximum Fan Width (cm): 40
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 1.03
• Maximum Flow Rate (L/min): 3.90

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (psi): 5000

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.031

• Pattern Size (in): 16 to 18
• Pattern Size (mm): 406.4 to 457.2

GG 26A029

GG 26A070

CONTROL, SYSTEM, PRODISPENSE

Graco 26A070 ProDispense Control Model Assembly, Base System

This cost-effective and user-friendly electronic system dispenses preset amounts of fluids.

• Control 2 fluid panels with this base system.
• Deliver up to 8 different fluids at multiple dispense points, and accurately measure volume.

• Model: ProDispense

• For Use With: ProDispense Electronic Fluid Dispense and Meter System
• Frequency (Hz): 50/60

• Includes: 1 Advanced Display Module (ADM), 1 Fluid Control Module (26A134) that controls 2 fluid panels

GG 26A078

GG 26A079

GG 26A083

GG 26A119

METER,GEAR, ASSY, G3000A

Graco 26A119 G3000A High Pressure Fluid Meters, 0.02 to 1.0 gpm (75 to 3800 cc/min) flow range

GG 26A118

BODY,GEARMETER, G3000A

GG 26A129

PANEL, FLUID, OIL/LUBRICANT

Graco 26A129 ProDispense Fluid Panel Kit, Oil Meter, 10 wt oil to #2 grease

This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for oil and lubricant applications.

• Oil meter dispenses 10 wt oil to #2 grease.

• Model: ProDispense

• For Use With: Oil and gear lube applications

GG 26A123

KIT,CONTROL,AIR,PD2K

GG 26A130

PANEL, FLUID, WATER/ANTIFREEZE

Graco 26A130 ProDispense Fluid Panel Kit, Water Meter, light viscosity, average resolution

This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for water and antifreeze applications.

• Turbine meter is compatible with water and antifreeze.

• Model: ProDispense

GG 26A134

KIT, FCM, FLUIDCTRL, PRODISPENSE

Graco 26A134 ProDispense Fluid Control Module

Fluid Control Module (FCM) expands the base ProDispense system by 2 fluid panels.

• A mounting plate makes attachment to the fluid panel easy.
• Up to 3 modules can be used on each system.
• Additional FCM is required only if more than 2 fluid panels need to be controlled.

• Model: ProDispense

• For Use With: ProDispense Electronic Fluid Dispense and Meter System

• Includes: Mounting plate

GG 26A133

GG 26A187

GG 26A131

PANEL, FLUID, GREASE/PAINT, G3000

Graco 26A131 ProDispense Fluid Panel Kit, Grease/ Paint Meter, wide viscosity, high accuracy

This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for grease and paint applications.

• Model: ProDispense

• Air Inlet Size (in): 5/32
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: Push

• Fluid Inlet Size (in): 1/4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (in): 3/8
• Fluid Outlet Thread Gender: Male
• Fluid Outlet Thread Type: NPT

• For Use With: G3000 meter

• Maximum Air Pressure (bar): 7.03

• Maximum Air Pressure (kPa): 703
• Maximum Air Pressure (psi): 102

• Maximum Flow Rate (cc/min): 3800

• Maximum Flow Rate (GPM): 1
• Maximum Flow Rate (L/min): 3.8

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (psi): 3000

• Minimum Flow Rate (GPM): 0.02

GG 26A169

GG 26A165

PANEL, FLUID, SOLVENT

Graco 26A165 ProDispense Fluid Panel Kit, Solvent Meter, light viscosity, high accuracy

This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for solvent applications.

• Use S3000 meter with solvents and clear light viscosity materials.

• Model: ProDispense

• For Use With: S3000 meter

GG 26A246

GG 26A304

T3 PUMP, TRANSFER, 3:1

Graco 26A304 T3 Supply Pump (Stainless Steel): 3:1 Fluid to Air Ratio

Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco's proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump - using less air pressure to provide the same fluid pressure required.

• Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.
• More quiet - Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.
• Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor.

• Model: T3
• Series: Stainless Steel

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Compatible Material: Polyurethane Foam, Polyurea

• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Includes: Fluid Supply Kit, Air Hose Kit

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (MPa): 0.69
• Maximum Air Inlet Pressure (psi): 100

• Maximum Working Pressure (bar): 21.7
• Maximum Working Pressure (kPa): 2170
• Maximum Working Pressure (MPa): 2.2
• Maximum Working Pressure (psi): 315

• Package Options: Bare

• Pump Ratio: 3:1

GG 26A312

GG 26A247

GG 26A153

GG 26A132

PANEL, FLUID, GREASE/PAINT, HELIC

Graco 26A132 ProDispense Fluid Panel Kit, Helical Meter, wide viscosity, high accuracy

This fluid panel kit for the ProDispense Electronic Preset Dispense System is ideal for high viscosity applications.

• HG6000 Helical Gear meter

• Model: ProDispense

• For Use With: HG6000 meter

GG 26A263

KIT,TRANSDUCER,INLET,LP,PD2K

GG 26A225

KIT, MIX MANIFOLD, HP

Graco 26A225 ProMix PD2K High Pressure Mix at the Belt Manifold Kit

Mix Manifold Kits

• Model: ProMix
• Series: PD2K

• Maximum Working Pressure (bar): 105
• Maximum Working Pressure (kPa): 10500
• Maximum Working Pressure (MPa): 10.5
• Maximum Working Pressure (psi): 1500

GG 26A349

GG 26A357

GG 26A355

KIT,VALVE,DISPENSE,HP

GG 26A350

GG 26A358

KIT, MIX MANIFOLD, LP

Graco 26A358 ProMix PD2K Low Pressure Mix at the Belt Manifold Kit

Mix Manifold Kits

• Model: ProMix
• Series: PD2K

GG 26A362

KIT, LP, SOLVENT VALVE

Graco 26A362 Low Pressure Non-Circulating Solvent Compatible Valve, 100 psi (7 bar) Max Air Pressure, 300 psi (21 bar) Max Fluid Pressure

• Channels: 4

GG 26A369

GG 26A379

GG 26A378

KIT,REBUILD,MIX MANIFOLD

GG 26A381

GG 26A385

GG 26A460

GG 26A781

GG 26A468