GRACO INC. S10595

GG 24H515

GG 24H372

MODULE, ACS CONVERTER

Graco 24H372 ACS Module for E-Flo Circulation Pumps

GG 24H521

GG 24H283

GG 24H537

GG 24H539

GG 24H542

GG 24H554

GG 24H254

KIT, COLOR VALVE STACK, REPAIR

Graco 24H254 Valve Stack Rebuild Kit for ProMix 2KE Electronic Proportioner

GG 24J305

GG 24H669

GG 24J395

GBL 7500 PUMP, GRAVITY, 1/4

Graco 24J395 Manzel GBL 7500 Replacement Pump, Gravity Fed, 1/4 in (6.4 mm)

The Graco Manzel GBL 7500 Gravity pump is engineered for long-life and maximum flexibility for easy system integration. It has been improved to perform in best-practice applications for a durable solution that is hard to beat.

• Mechanically driven from camshaft in reservoir.
• Adjustable from 1 to 27 drops per stroke and develop pressures up to 7,500 psi (517 bar).
• Rugged construction for high quality performance and durability with easy to adjust pump output.
• Double Ball Outlet Check reduces ball travel.
• Improved O-ring seals to eliminate leak paths.
• Patent pending Built-in-Socket spreads force evenly over piston tip to avoid bending and wear for long piston and rocker life.
• Ball bearing roller has superior rotation to help protect camshaft from damage. Larger diameter roller spreads load pressure to reduce wear and improve pump life.

• Model: Manzel
• Series: GBL 7500

• Application: In-Plant Machinery, Compressor Equipment

• Compatible Material: Oil

• Maximum Cycle Rate (CPM): 50

• Maximum Output Volume (in cu ): 0.024

• Maximum Working Pressure (bar): 414
• Maximum Working Pressure (kPa): 41400
• Maximum Working Pressure (MPa): 41.4
• Maximum Working Pressure (psi): 6000

GG 24J415

GG 24H853

GG 24J036

KIT, PACKAGE, 120# DRUM NPT

Graco 24J036 LD Series 50:1 120 lb. (54 kg) Grease Pump - Stationary Package

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume up to 7,000 lb./year (3175 kg./year) applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor - Provides more power to create better flow.
• Engineered for Durability - Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Grease

• Compatible Material: Grease

• Container Size (lb): 120

• Fluid Outlet Size (cm): 0.635
• Fluid Outlet Size (in): 1/4
• Fluid Outlet Size (mm): 6.35

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (MPa): 35
• Maximum Working Pressure (psi): 5000

• Power Type: Pneumatic

• Pump Ratio: 50:1

GG 24H695

KIT, 3:1 WALL MOUNT TOTE-NPT

Graco 24H695 LD Series 3:1 Wall Mount 275 Gallon (1040 Liter) Oil Pump Package - NPT

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor - Provides more power to create better flow.
• Engineered for Durability - Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.
• Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Oil

• Compatible Material: Oil

• Fluid Inlet Size (cm): 2.5400
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4000

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7

• Maximum Flow Rate (GPM): 7.8

• Maximum Working Pressure (bar): 52
• Maximum Working Pressure (kPa): 5200
• Maximum Working Pressure (MPa): 5.2
• Maximum Working Pressure (psi): 750

• Power Type: Pneumatic

• Pump Ratio: 3:1

GG 24J042

KIT, PACKAGE, 400# DRUM NPT

Graco 24J042 LD Series 50:1 400 lb. (180 kg) Grease Pump - Stationary Package

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume up to 7,000 lb./year (3175 kg./year) applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor - Provides more power to create better flow.
• Engineered for Durability - Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Grease

• Compatible Material: Grease

• Container Size (lb): 400

• Fluid Outlet Size (cm): 0.635
• Fluid Outlet Size (in): 1/4
• Fluid Outlet Size (mm): 6.35

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (MPa): 35
• Maximum Working Pressure (psi): 5000

• Power Type: Pneumatic

• Pump Ratio: 50:1

GG 24J394

GBL 7500 PUMP, GRAVITY, 3/16

Graco 24J394 Manzel GBL 7500 Replacement Pump, Gravity Fed, 3/16 in (4.8 mm)

The Graco Manzel GBL 7500 Gravity pump is engineered for long-life and maximum flexibility for easy system integration. It has been improved to perform in best-practice applications for a durable solution that is hard to beat.

• Mechanically driven from camshaft in reservoir.
• Adjustable from 1 to 27 drops per stroke and develop pressures up to 7,500 psi (517 bar).
• Rugged construction for high quality performance and durability with easy to adjust pump output.
• Double Ball Outlet Check reduces ball travel.
• Improved O-ring seals to eliminate leak paths.
• Patent pending Built-in-Socket spreads force evenly over piston tip to avoid bending and wear for long piston and rocker life.
• Ball bearing roller has superior rotation to help protect camshaft from damage. Larger diameter roller spreads load pressure to reduce wear and improve pump life.

• Model: Manzel
• Series: GBL 7500

• Application: In-Plant Machinery, Compressor Equipment

• Compatible Material: Oil

• Maximum Cycle Rate (CPM): 50

• Maximum Output Volume (in cu ): 0.014

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 51.7
• Maximum Working Pressure (psi): 7500

GG 24J392

GBL 7500 PUMP, SUCTION, 1/4

Graco 24J392 Manzel GBL 7500 Replacement Pump, Suction Fed, 1/4 in (6.4 mm)

The Graco Manzel GBL 7500 Suction pump is engineered for long-life and maximum flexibility for easy system integration. It has been improved to perform in best-practice applications for a durable solution that is hard to beat.

• Mechanically driven from camshaft in reservoir.
• Adjustable from 1 to 27 drops per stroke and develop pressures up to 7,500 psi (517 bar).
• Rugged construction for high quality performance and durability with easy to adjust pump output.
• Double Ball Outlet Check reduces ball travel.
• Improved O-ring seals to eliminate leak paths.
• Patent pending Built-in-Socket spreads force evenly over piston tip to avoid bending and wear for long piston and rocker life.
• Ball bearing roller has superior rotation to help protect camshaft from damage. Larger diameter roller spreads load pressure to reduce wear and improve pump life.

• Model: Manzel
• Series: GBL 7500

• Application: In-Plant Machinery, Compressor Equipment

• Compatible Material: Oil

• Maximum Cycle Rate (CPM): 50

• Maximum Output Volume (in cu ): 0.024

• Maximum Working Pressure (bar): 414
• Maximum Working Pressure (kPa): 41400
• Maximum Working Pressure (MPa): 41.4
• Maximum Working Pressure (psi): 6000

GG 24H611

GG 24H836

KIT, 5:1 WALL MOUNT DRUM-NPT

Graco 24H836 LD Series 5:1 Wall Mount 55 Gallon (200 Liter) Oil Pump Package - NPT

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor -Provides more power to create better flow.
• Engineered for Durability -Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Extended Seal Life -In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.
• Built-In Thermal Relief and Inlet Strainer -Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Oil

• Compatible Material: Oil

• Fluid Inlet Size (cm): 2.5400
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4000

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7

• Maximum Flow Rate (GPM): 6.7

• Maximum Working Pressure (bar): 52
• Maximum Working Pressure (kPa): 5200
• Maximum Working Pressure (MPa): 5.2
• Maximum Working Pressure (psi): 750

• Number of Pieces: 3

• Power Type: Pneumatic

• Pump Ratio: 5:1

GG 24J187

DISPENSER,GX-16,NVH,STRAIGHT,24:1

Graco 24J187 24:1 Straight GX16 Mixhead for NVH Foam

Depend on the GX16 for reliable performance and repeatable results

• Lightweight and ergonomic for easy handling

• Fluids continuously circulate to ensure accurate conditioning

• Manual or machine mount

  Hydraulically actuated

• 250,000 shot warranty

• The two reactive materials used to create foam, "A" and "B," are kept separate until they reach the GX16 mixhead. If the gun is not dispensing, the materials simply circulate back to the day tanks

• During the dispense mode, the metering pumps precisely deliver both materials to the mixing head at the required ratio, flow rate and temperature. The chemicals combine in the mix chamber by impingement mixing. The mixture is then injected into a mold or cavity

• Application: NVH

GG 24J358

HUSKY PUMP, 1590A, SS/PT/PO/PT

Graco 24J358 Husky 1590 (1.5 in. NPT) AL Pump, AL Center Section, SS Seats, PTFE Balls & PO Diaphragm

The Husky 1590 air-operated diaphragm pump features a patented, high-reliability closed center air valve that is online serviceable and an epoxy-coated air section for tough environmental conditions.

• Up to 5 times longer diaphragm life compared to other air operated diaphragm pumps in its class
• Expanded material offering to handle endless applications
• Fewer parts than industry peers, the air valve is externally accessible so it can be serviced quickly and easily without uninstalling the diaphragm pump
• 1-1/2 in. (38.1 mm) ANSI end-porting
• High flow - 100 gpm (378 lpm) in a compact, portable size
• Fluid pressure to 120 psi (8.4 bar, 0.84 MPa)
• Lube-free operation
• Available in polypropylene, aluminum and stainless steel
• Epoxy-coated air section for tough environmental conditions

• Model: Husky
• Series: 1590

• Air Exhaust Port Size (in): 3/4
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 3.81
• Fluid Inlet Size (in): 1-1/2
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 3.81
• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Aluminum

• Manifold Configuration: End Port
• Manifold O-Ring Material: PTFE
• Material: Aluminum

• Maximum Air Consumption (SCFM): 125
• Maximum Air Pressure (bar): 8

• Maximum Air Pressure (kPa): 800
• Maximum Air Pressure (MPa): 0.8
• Maximum Air Pressure (psi): 120

• Maximum Cycle Rate (CPM): 200

• Maximum Flow Rate (GPM): 100
• Maximum Flow Rate (L/min): 379

• Maximum Fluid Pressure (bar): 8
• Maximum Fluid Pressure (kPa): 800
• Maximum Fluid Pressure (MPa): 0.8
• Maximum Fluid Pressure (psi): 120

• Maximum Fluid Pressure (bar): 8
• Maximum Fluid Pressure (kPa): 800
• Maximum Fluid Pressure (MPa): 0.8
• Maximum Fluid Pressure (psi): 120

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Solid Size (cm): 0.4763
• Maximum Solid Size (in): 0.1875
• Maximum Solid Size (mm): 4.763

• Power Source: Air

GG 24H753

KIT, 3:1 CART W/ REEL-NPT

Graco 24H753 LD Series 3:1 Mobile Oil Pump Package - Preset Meter Type

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor - Provides more power to create better flow.
• Engineered for Durability - Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.
• Built-In Thermal Relief and Inlet Strainer - Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Oil

• Compatible Material: Oil

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7

• Maximum Air Working Pressure (psi): 150

• Maximum Flow Rate (GPM): 7.8

• Maximum Working Pressure (bar): 52
• Maximum Working Pressure (kPa): 5200
• Maximum Working Pressure (MPa): 5.2
• Maximum Working Pressure (psi): 750

• Mount Location: Cart Mount

• Power Type: Pneumatic

• Pump Ratio: 3:1

GG 24H855

GG 24H989

CONTROL, FLOW, REGULATOR

Graco 24H989 Flow Control Module, for use with remotely mounted, air-operated fluid regulator (not included)

GG 24H692

GG 24J495

GG 24H870

KIT, 5:1 TOTE MOUNT TOP-NPT

Graco 24H870 LD Series 5:1 Stationary 275 Gallon (1040 Liter) Oil Pump Package - NPT

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor -Provides more power to create better flow.
• Engineered for Durability -Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Extended Seal Life -In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.
• Built-In Thermal Relief and Inlet Strainer -Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Oil

• Compatible Material: Oil

• Fluid Inlet Size (cm): 2.5400
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4000

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7

• Maximum Flow Rate (GPM): 6.7

• Maximum Working Pressure (bar): 52
• Maximum Working Pressure (kPa): 5200
• Maximum Working Pressure (MPa): 5.2
• Maximum Working Pressure (psi): 750

• Number of Pieces: 8

• Power Type: Pneumatic

• Pump Ratio: 5:1

GG 24J496

GG 24J030

KIT, PACKAGE, 35# DRUM NPT

Graco 24J030 LD Series 50:1 35 lb (16 kg) Grease Pump - Stationary Package

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume up to 7,000 lb./year (3175 kg./year) applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor - Provides more power to create better flow.
• Engineered for Durability - Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Grease

• Compatible Material: Grease

• Container Size (lb): 35

• Fluid Outlet Size (cm): 0.635
• Fluid Outlet Size (in): 1/4
• Fluid Outlet Size (mm): 6.35

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (kPa): 34500
• Maximum Working Pressure (MPa): 35
• Maximum Working Pressure (psi): 5000

• Power Type: Pneumatic

• Pump Ratio: 50:1

GG 24H752

KIT, 3:1 CART W/ REEL-NPT

Graco 24H752 LD Series 3:1 275 Gallon (1040 Liter) Tote Mobile Oil Pump Package - Preset Meter

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor -Provides more power to create better flow.
• Engineered for Durability -Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Extended Seal Life -In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.
• Built-In Thermal Relief and Inlet Strainer -Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Oil

• Compatible Material: Oil

• Fluid Inlet Size (cm): 2.5400
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4000

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7

• Maximum Flow Rate (GPM): 7.8

• Maximum Working Pressure (bar): 52
• Maximum Working Pressure (kPa): 5200
• Maximum Working Pressure (MPa): 5.2
• Maximum Working Pressure (psi): 750

• Power Type: Pneumatic

• Pump Ratio: 3:1

GG 24J523

GG 24J528

GG 24J531

GG 24J536

GG 24J534

GG 24J600

FINEX GUN, GRACO

Graco 24J600 Finex Air Spray Gravity Feed Side Cup Gun, HVLP, 0.055 in (1.4 mm) needle/ nozzle size

The Finex Side Cup Gun has a cup that swivels - ideal for end users spraying in tight spaces. Available in either HVLP or conventional technologies.

• Aluminum cup is included with the gun
• Cup swivels for spraying in small spaces
• Light trigger pull for operator comfort
• Integrated air inlet adjustment (cheater) valve

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Side-Cup Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.14
• Fluid Orifice Size (in): 0.055
• Fluid Orifice Size (mm): 1.4

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: HVLP Gun
• Gun Weight (kg): 0.54
• Gun Weight (lb): 1.2

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Product Type: Spray Gun

GG 24J601

FINEX GUN, GRACO

Graco 24J601 Finex Air Spray Gravity Feed Side Cup Gun, conventional, 0.039 in (1.0 mm) needle/ nozzle size

The Finex Side Cup Gun has a cup that swivels - ideal for end users spraying in tight spaces. Available in either HVLP or conventional technologies.

• Aluminum cup is included with the gun
• Cup swivels for spraying in small spaces
• Light trigger pull for operator comfort
• Integrated air inlet adjustment (cheater) valve

• Model: Finex

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPSM

• Applicator Type: Manual

• Bleed Type: Non-Bleeder
• Body Material: Metal

• Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

• Feed Type: Side-Cup Gravity Feed

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Type: NPSM
• Fluid Orifice Size (cm): 0.10
• Fluid Orifice Size (in): 0.039
• Fluid Orifice Size (mm): 1.0

• Gun Activation: Manual
• Gun Included: 1
• Gun Type: Conventional Gun
• Gun Weight (kg): 0.54
• Gun Weight (lb): 1.2

• Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (MPa): 0.7
• Maximum Air Inlet Pressure (psi): 100
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100
• Maximum Fluid Temperature ( degree C): 43
• Maximum Fluid Temperature ( degree F): 109

• Product Type: Spray Gun

GG 24J674

GG 24J673

GG 24J676

GG 24J678

GG 24J876

GG 24J679

GG 24J912

GG 24K164

GREASE JOCKEY PUMP, 6 LB PLSTC RESV TEE

Graco 24K164 Pneumatic Grease Jockey Pump with 6 lb. (2.72 kg) Reservoir, Straight Fill Port, Fluid Tee Outlet

Classic Grease Jockey pump

• For NLGI #000 to #0 grade grease

• Model: Grease Jockey

• Air Inlet Size (in): 0.2502
• Air Inlet Size (mm): 6.35

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Grease

• Component Technology: Solid-State

• Includes: Pneumatic Grease Jockey Pump, Reservoir, Fittings, Hardware

• Material: Cast Aluminum

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Fluid Output Pressure (bar): 93
• Maximum Fluid Output Pressure (psi): 1350

• Maximum Fluid Output Pressure (bar): 93
• Maximum Fluid Output Pressure (psi): 1350

• Maximum NLGI Grade: #0

• Maximum Run Time (min): 99

• Maximum Voltage (V dc): 32

• Minimum Air Inlet Pressure (psi): 60

• Minimum Voltage (V dc): 9

• Overall Width (cm): 39.4
• Overall Width (in): 15.5
• Overall Width (mm): 394

• Power Type: Pneumatic

GG 24K240

REACTOR HEATED HOSE, 2000, 3/8, W/RTD AND SG

Graco 24K240 50 ft x 3/8 in Heated Hose, 2000 psi, RTD, Mesh Scuff, Reactor 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • Copper-heated hoses are designed specifically for use with Graco proportioners
  • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
  • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
  • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
  • Helix-design whip hose uses braided copper wires for added flexibility and longer life
  • Resistance Temperature Detector (RTD)

    Graco's latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.

    
    

    • Model: Reactor 2
    • Series: Mesh Scuff
    • Compatible Sprayer: Reactor 2
    • For Use With: Plural Component Proportioners
    • Hose Heating Type: External Heated
    • Hose Inside Diameter (in): 3/8
    • Hose Inside Diameter (mm): 9.525
    • Hose Length (ft): 50
    • Hose Length (m): 15.2
    • Inside Diameter (in): 3/8
    • Maximum Working Pressure (bar): 138
    • Maximum Working Pressure (kPa): 13800
    • Maximum Working Pressure (MPa): 13.8
    • Maximum Working Pressure (psi): 2000

GG 24K207

GG 24K241

REACTOR HEATED HOSE, 3500, 3/8, W/RTD AND SG

Graco 24K241 50 ft x 3/8 in Heated Hose, 3500 psi, RTD, Mesh Scuff, Reactor 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • Copper-heated hoses are designed specifically for use with Graco proportioners
  • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
  • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
  • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
  • Helix-design whip hose uses braided copper wires for added flexibility and longer life
  • Resistance Temperature Detector (RTD)

    Graco's latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.

    
    

    • Model: Reactor 2
    • Series: Mesh Scuff
    • Compatible Sprayer: Reactor 2
    • For Use With: Plural Component Proportioners
    • Hose Heating Type: External Heated
    • Hose Inside Diameter (in): 3/8
    • Hose Inside Diameter (mm): 9.525
    • Hose Length (ft): 50
    • Hose Length (m): 15.2
    • Inside Diameter (in): 3/8
    • Maximum Working Pressure (bar): 241
    • Maximum Working Pressure (kPa): 24100
    • Maximum Working Pressure (MPa): 24.1
    • Maximum Working Pressure (psi): 3500

GG 24K285

GG 24K363

GG 24K414

KIT, ACCESSORY, PRESS SWITCH

Graco 24K414 General Pressure Switch, 1/4 NPT Male, 9.6-32 VDC, 4-Pin, M12 Micro-Connector

Signals your lubrication controller when the lube system reaches the desired pressure level.

• Easy to visually adjust line pressure and reset pressure to ensure your lube system has vented properly
• LED lights visually display pressure switch functions
• Modern 4-pin M12 micro-connector easily connects to the G3 and other controllers
• Sends an alarm signal to alert either a high or low pressure condition
• Available for hydraulic pressures from 290 to 5800 psi (20 to 400 bar)
• 1/4 in NPT thread allows quick connection to injector systems

• Adjustable: Adjustable

• Application: On-Road Vehicles, Off-Road Equipment

• Inlet Size (cm): 0.635
• Inlet Size (in): 0.25
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPT

• Maximum Operating Pressure (psi): 5800

• Power Connection Type: 4-Pin

GG 24K694

KIT, GLYCERIN, GALLON, GR

Graco 24K694 Glycerin Based Hose Lube (1 gallon)

GG 24K682

GG 24K801

KIT,FMA,CARTRIDGE,HI RES,016

KIT INCLUDES: PLATE, FMA, CARTRIDGE, HI RES, 016 [QTY. 1], DOCUMENT, DECLARATION [QTY. 1], CONNECTOR, SPLITTER, (2)M12(M)XM12(F) [QTY. 1], CABLE, CAN, FEMALE/FEMALE, 15.0M [QTY. 1]

GG 24K803

KIT,FMA,MASTIC,HI RES,016

KIT INCLUDES: PLATE, FMA, MASTIC, HI RES, 016 [QTY. 1], DOCUMENT, DECLARATION [QTY. 1], CONNECTOR, SPLITTER, (2)M12(M)XM12(F) [QTY. 1], CABLE, CAN, FEMALE/FEMALE, 15.0M [QTY. 1]

GG 24K812

GG 24K839

KIT, 5:1 TANK PACKAGE NPT

Graco 24K839 LD Series 5:1 Deluxe Stationary 275 Gallon (1040 Liter) Oil Pump with SD Series Hose Reel Package - Preset Meter Type

Stay ahead of the competition with LD Series pumps. These affordable and full-featured pumps are designed for lower-volume applications. LD pumps are fine-tuned for a compact, flexible and durable solution.

• Three Inch Air Motor -Provides more power to create better flow.
• Engineered for Durability -Patented cup and plate design eliminates the need for O-rings that wear out faster for a more durable, longer-lasting solution.
• Modular Air Valve - Air inlet and exhaust locations are easy to configure with just four bolts for simple, hassle free installations.
• Built-In Thermal Relief and Inlet Strainer -Built-in thermal relief protects your equipment from thermal expansion, and an inlet strainer is built in to protect pump from contaminants.

• Model: LD

• Air Inlet Size (in): 0.25

• Application: Oil

• Compatible Material: Oil

• Fluid Inlet Size (cm): 2.5400
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4000

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7

• Maximum Flow Rate (GPM): 6.7

• Maximum Working Pressure (bar): 52
• Maximum Working Pressure (kPa): 5200
• Maximum Working Pressure (MPa): 5.2
• Maximum Working Pressure (psi): 750

• Power Type: Pneumatic

• Pump Ratio: 5:1

GG 24K859

GG 24K860

GG 24K903

KIT, DIAPHRAGM-L1 FK

Graco 24K903 FKM (Viton) Diaphragm Kit for 3-inch Pump

GG 24K906

GG 24K928

KIT, SEAT 3300 AC

Graco 24K928 3-inch Acetal Seat Kit

GG 24K934

KIT, SEAT 3300 SP

Graco 24K934 Seat Kit

GG 24K935

KIT, SEAT 3300 SS

Graco 24K935 Seat Kit

GG 24K943

KIT, BALL-L1/L2 PT

Graco 24K943 Ball Kit

GG 24K944

KIT, BALL-L1/L2 SP

Graco 24K944 Ball Kit

GG 24K954

GG 24K994

GG 24K993

GG 24K999

GG 24L008

GG 24L973

GG 24N323

CHANNEL, XD ENCLOSURE, 1 REEL

Graco 24N323 XD Series Hose Reel Enclosed Reel Mounting Channel - Accommodates 1 Reel

• Number of Pieces: 9

GG 24M392

GG 24N275

GG 24N345

GG 24N350

GG 24N097

HUSKY PUMP, 515AC-PP01AAC3SSSSPOPT

Graco 24N097 Husky 515 AC Pump, PP Center Section, SS Seats, SS Balls & PO Diaphragm

Our Husky air-operated double diaphragm pumps are loaded with features to help you get the job done right, every time, and are built to save you money. The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

• Rugged construction

  Resists corrosion for reliable performance and long life

  • Heavy-duty design

    Offers long life, increased productivity and lower overall cost of ownership

    • Benefits of the Husky 515 double diaphragm pump

      Center and end porting options.

      No mechanical seals to cause fluid leaks or failures

      Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels

      Easy-to-service air valve and ball checks

      Operates on as little as 20 psi (1.4 bar, 0.14 MPa)

      Split manifold option to pump multiple fluids without mixing

      • Delivery up to 15 gpm (56.7 lpm)
      • Easy-to-service air valve and ball checks
      • Reliable air valve for years of dependable performance
      • Lube-free for cleaner operation
      • DataTrak available to prevent pump runaway and track material usage

      
      

      • Model: Husky
      • Series: 515
      • Air Exhaust Port Size (in): 3/8
      • Air Exhaust Port Thread Gender: Female
      • Air Exhaust Port Thread Type: NPT
      • Air Inlet Size (in): 1/4
      • Air Inlet Thread Gender: Female
      • Air Inlet Thread Type: NPT
      • Application: Industrial
      • Ball Material: 316 Stainless Steel
      • Center Section Material: Polypropylene
      • Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink
      • Connection Type: Threaded
      • Diaphragm Compatible Material: PTFE
      • Diaphragm Material: PTFE Overmold
      • Fluid Inlet Size (cm): 1.27
      • Fluid Inlet Size (in): 1/2
      • Fluid Inlet Size (mm): 12.7
      • Fluid Inlet Thread Gender: Female
      • Fluid Inlet Thread Type: NPT
      • Fluid Outlet Size (cm): 1.27
      • Fluid Outlet Size (in): 1/2
      • Fluid Outlet Size (mm): 12.7
      • Fluid Outlet Thread Gender: Female
      • Fluid Outlet Thread Type: NPT
      • Fluid Section Material: Acetal
      • Manifold Configuration: Center Port
      • Manifold O-Ring Material: PTFE
      • Material: Acetal
      • Maximum Air Consumption (SCFM): 28
      • Maximum Air Pressure (bar): 7
      • Maximum Air Pressure (kPa): 700
      • Maximum Air Pressure (MPa): 0.7
      • Maximum Air Pressure (psi): 100
      • Maximum Cycle Rate (CPM): 400
      • Maximum Flow Rate (GPM): 15
      • Maximum Flow Rate (L/min): 56.8
      • Maximum Fluid Pressure (bar): 7
      • Maximum Fluid Pressure (kPa): 700
      • Maximum Fluid Pressure (MPa): 0.7
      • Maximum Fluid Pressure (psi): 100
      • Maximum Fluid Pressure (bar): 7
      • Maximum Fluid Pressure (kPa): 700
      • Maximum Fluid Pressure (MPa): 0.7
      • Maximum Fluid Pressure (psi): 100
      • Maximum Operating Temperature ( degree C): 82

GG 24M478

VALVE, VENT, 12VDC, N.O. NPT, DEU RH

Graco 24M478 Direct-Mount Vent Valves for G3 Pumps - NPT, 12 VDC, 500-3500 psi (35-241 bar), Normally Open, RH

Industry leading feature for your lube system needs.

• Easily mounts to your G3 pump.
• Eliminates time and material costs associated with remote mounted vent valves.
• 12 VDC
• The normally open valve works with the G3 Standard no control pump. With an external control just add power to the pump and valve to run a lube cycle, and remove power from both to vent pressure.
• Adjustable pressure relief is integrated into the valve, no need to purchase an additional relief valve.
• Deutsch Power Connection

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Grease

• Factory Set Pressure (bar): 280
• Factory Set Pressure (kPa): 28000
• Factory Set Pressure (psi): 4000

• For Use With: G3 Pumps

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 5
• Maximum Flow Rate (L/min): 19

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24
• Maximum Working Pressure (psi): 3500

• Outlet Thread Type: NPT

GG 24M122

GG 24N279

KIT, AIR CAP

Graco 24N279 Air Cap, Black, optimized for medium and heavy viscosity and high solid coatings at standard production rates, round end

GG 24N274

GG 24N095

HUSKY PUMP, 515F-PP01AP3PVPTPOPT

Graco 24N095 Husky 515 PVDF Pump, PP Center Section, PVDF Seats, PTFE Balls & PO Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

• Center and end porting options.
• No mechanical seals to cause fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
• Split manifold option to pump multiple fluids without mixing
• Delivery up to 15 gpm (56.7 lpm)
• Easy-to-service air valve and ball checks
• Reliable air valve for years of dependable performance

• Model: Husky
• Series: 515

• Air Exhaust Port Size (in): 3/8
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: PVDF (Kynar)

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: PVDF

• Maximum Air Consumption (SCFM): 28
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 400

• Maximum Flow Rate (GPM): 15
• Maximum Flow Rate (L/min): 56.8

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 107
• Maximum Operating Temperature ( degree F): 225

• Maximum Solid Size (cm): 0.2383
• Maximum Solid Size (in): 0.09375
• Maximum Solid Size (mm): 2.4

• Minimum Operating Temperature ( degree C): 4
• Minimum Operating Temperature ( degree F): 40

• Overall Height (in): 10.63

• Power Source: Air

GG 24N262

HUSKY PUMP, 716S-PP01AS1SSSSPOPT

Graco 24N262 Husky 716 SS Pump, PP Center Section, SS Seats, SS Balls & PO Diaphragm

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

• Center- and end-porting
• No mechanical seals which causes fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• 3/4 in (19.05 mm) center- and end-porting
• No seals to leak or fail
• Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks

• Model: Husky
• Series: 716

• Air Exhaust Port Size (in): 3/8
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: 316 Stainless Steel

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.905
• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Stainless Steel

• Maximum Air Consumption (SCFM): 28
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 400

• Maximum Flow Rate (GPM): 16
• Maximum Flow Rate (L/min): 60.6

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 107
• Maximum Operating Temperature ( degree F): 225

• Maximum Solid Size (cm): 0.2383
• Maximum Solid Size (in): 0.09375
• Maximum Solid Size (mm): 2.4

• Minimum Operating Temperature ( degree C): 4
• Minimum Operating Temperature ( degree F): 40

• Overall Height (in): 10.43

• Power Source: Air

GG 24N096

HUSKY PUMP, 515AC-PP01AA3ACPTPOPT

Graco 24N096 Husky 515 1/2 in NPT AC Pump, PP Center Section, AC Seats, PTFE Balls & PO Diaphragm

Our Husky air-operated double diaphragm pumps are loaded with features to help you get the job done right, every time, and are built to save you money. The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

• Rugged construction

  Resists corrosion for reliable performance and long life

  • Heavy-duty design

    Offers long life, increased productivity and lower overall cost of ownership

    • Benefits of the Husky 515 double diaphragm pump

      Center and end porting options.

      No mechanical seals to cause fluid leaks or failures

      Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels

      Easy-to-service air valve and ball checks

      Operates on as little as 20 psi (1.4 bar, 0.14 MPa)

      Split manifold option to pump multiple fluids without mixing

      • Delivery up to 15 gpm (56.7 lpm)
      • Easy-to-service air valve and ball checks
      • Reliable air valve for years of dependable performance
      • Lube-free for cleaner operation
      • DataTrak available to prevent pump runaway and track material usage

      
      

      • Model: Husky
      • Series: 515
      • Air Exhaust Port Size (in): 3/8
      • Air Exhaust Port Thread Gender: Female
      • Air Exhaust Port Thread Type: NPT
      • Air Inlet Size (in): 1/4
      • Air Inlet Thread Gender: Female
      • Air Inlet Thread Type: NPT
      • Application: Industrial
      • Ball Material: PTFE
      • Center Section Material: Polypropylene
      • Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink
      • Connection Type: Threaded
      • Diaphragm Compatible Material: PTFE
      • Diaphragm Material: PTFE Overmold
      • Fluid Inlet Size (cm): 1.27
      • Fluid Inlet Size (in): 1/2
      • Fluid Inlet Size (mm): 12.7
      • Fluid Inlet Thread Gender: Female
      • Fluid Inlet Thread Type: NPT
      • Fluid Outlet Size (cm): 1.27
      • Fluid Outlet Size (in): 1/2
      • Fluid Outlet Size (mm): 12.7
      • Fluid Outlet Thread Gender: Female
      • Fluid Outlet Thread Type: NPT
      • Fluid Section Material: Acetal
      • Manifold Configuration: Center Port
      • Manifold O-Ring Material: PTFE
      • Material: Acetal
      • Maximum Air Consumption (SCFM): 28
      • Maximum Air Pressure (bar): 7
      • Maximum Air Pressure (kPa): 700
      • Maximum Air Pressure (MPa): 0.7
      • Maximum Air Pressure (psi): 100
      • Maximum Cycle Rate (CPM): 400
      • Maximum Flow Rate (GPM): 15
      • Maximum Flow Rate (L/min): 56.8
      • Maximum Fluid Pressure (bar): 7
      • Maximum Fluid Pressure (kPa): 700
      • Maximum Fluid Pressure (MPa): 0.7
      • Maximum Fluid Pressure (psi): 100
      • Maximum Fluid Pressure (bar): 7
      • Maximum Fluid Pressure (kPa): 700
      • Maximum Fluid Pressure (MPa): 0.7
      • Maximum Fluid Pressure (psi): 100
      • Maximum Operating Temperature ( degree C): 82

GG 24M154

GG 24M261

KIT, METER, I.S. CORLIOLIS 1/4"

Graco 24M261 Coriolis Meter Kit, Cubemass DCI Meter with 1/4 in (6 mm) metering tube for ProControl 1KS and ProMix 2KS/2KE/3KS

GG 24M174

GG 24N318

GG 24M121

GG 24M644

KIT, ACCESSORY, FILL STUD/CAP

Graco 24M644 G-Series Pump Accessories - High Capacity Fill Zerk with Quick Disconnect and Dust Cover

• High capacity fill zerk with quick disconnect and dust cover

• Connection Type: Quick-Disconnect

GG 24N258

HUSKY PUMP, 716A-PP01AA1SSPTPOPT

Graco 24N258 Husky 716 AL Pump, PP Center Section, SS Seats, PTFE Balls & PO Diaphragm

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

• Center- and end-porting
• No mechanical seals which causes fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• 3/4 in (19.05 mm) center- and end-porting
• No seals to leak or fail
• Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks

• Model: Husky
• Series: 716

• Air Exhaust Port Size (in): 3/8
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.905
• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Aluminum

• Maximum Air Consumption (SCFM): 28
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 400

• Maximum Flow Rate (GPM): 16
• Maximum Flow Rate (L/min): 60.6

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 107
• Maximum Operating Temperature ( degree F): 225

• Maximum Solid Size (cm): 0.2383
• Maximum Solid Size (in): 0.09375
• Maximum Solid Size (mm): 2.4

• Minimum Operating Temperature ( degree C): 4
• Minimum Operating Temperature ( degree F): 40

• Overall Height (in): 10.43

• Power Source: Air

GG 24M833

GG 24N093

HUSKY PUMP, 515P-PP01AP3PPPTPOPT

Graco 24N093 Husky 515 1/2 in NPT PP Pump, PP Center Section, PP Seats, PTFE Balls & PO Diaphragm

The Husky 515 air-operated double diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover.

The bolt through fluid cover design eliminates leaks and makes the Husky safer with higher reliability.

• Center and end porting options.
• No mechanical seals to cause fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Operates on as little as 20 psi (1.4 bar, 0.14 MPa)
• Split manifold option to pump multiple fluids without mixing
• Delivery up to 15 gpm (56.7 lpm)
• Easy-to-service air valve and ball checks
• Reliable air valve for years of dependable performance

• Model: Husky
• Series: 515

• Air Exhaust Port Size (in): 3/8
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Water - Wastewater Treatment, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Polypropylene

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Polypropylene

• Maximum Air Consumption (SCFM): 28
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 400

• Maximum Flow Rate (GPM): 15
• Maximum Flow Rate (L/min): 56.8

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 66
• Maximum Operating Temperature ( degree F): 150

• Maximum Solid Size (cm): 0.2383
• Maximum Solid Size (in): 0.09375
• Maximum Solid Size (mm): 2.4

• Minimum Operating Temperature ( degree C): 4
• Minimum Operating Temperature ( degree F): 40

• Overall Height (in): 10.63

• Power Source: Air

GG 24M731

GG 24N365

GG 24N259

HUSKY PUMP, 716A-PP01AA1SSSSPOPT

Graco 24N259 Husky 716 AL Pump, PP Center Section, SS Seats, SS Balls & PO Diaphragm

The Husky 716 air operated diaphragm pump features an external controller for remote control capabilities.

• Center- and end-porting
• No mechanical seals which causes fluid leaks or failures
• Runs quietly at less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• 3/4 in (19.05 mm) center- and end-porting
• No seals to leak or fail
• Quiet running less than 85 dBa with easy-to-use remote muffler capability for even lower noise levels
• Easy-to-service air valve and ball checks

• Model: Husky
• Series: 716

• Air Exhaust Port Size (in): 3/8
• Air Exhaust Port Thread Gender: Female
• Air Exhaust Port Thread Type: NPT
• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: 316 Stainless Steel

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergents, Motor Oil, Grease & Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 1.905
• Fluid Inlet Size (in): 3/4
• Fluid Inlet Size (mm): 19.05
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.905
• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Aluminum

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: Aluminum

• Maximum Air Consumption (SCFM): 28
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 400

• Maximum Flow Rate (GPM): 16
• Maximum Flow Rate (L/min): 60.6

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 107
• Maximum Operating Temperature ( degree F): 225

• Maximum Solid Size (cm): 0.2383
• Maximum Solid Size (in): 0.09375
• Maximum Solid Size (mm): 2.4

• Minimum Operating Temperature ( degree C): 4
• Minimum Operating Temperature ( degree F): 40

• Overall Height (in): 10.43

• Power Source: Air

GG 24N468

GLC CONTROL, 2200

Graco 24N468 GLC 2200 Series Controller

You spend a lot on your equipment. The GLC 2200 controller helps protect components by alerting you to lube events, failures and low lubrication levels. You have peace of mind knowing your investment is protected.

• Easy to mount without having to open up the control box
• LEDs let you know what your system is doing at a glance
• Easy to read digital display makes it simple to program and monitor your equipment
• Simple icon based push buttons make programming easy
• Color coded wiring harness with flying leads and easy to follow wiring diagrams makes installations efficient

• Model: GLC
• Series: 2200

• Amperage (A): 7, 9
• Application: In-Plant Machinery, Off-Road Equipment

• For Use With: Automatic Lubrication Systems

• Intrusion Rating: IP54

• Maximum Operating Temperature ( degree C): 80
• Maximum Operating Temperature ( degree F): 176

• Maximum Storage Temperature ( degree C): 80
• Maximum Storage Temperature ( degree F): 176

• Maximum Voltage (V dc): 30

• Minimum Operating Temperature ( degree C): -40
• Minimum Operating Temperature ( degree F): -40

• Minimum Storage Temperature ( degree C): -40
• Minimum Storage Temperature ( degree F): -40

• Power Consumption (W): 1

• Power Source: DC