Grinders
3 ANGLE GRINDER W/3 GUARD
MPT MP-9513EXTAGS-383T1
3 ANGLE GRINDER W/3 GUARD
3 ANGLE GRINDER W/ GUARD
MPT MP-9513EXTDGS-383T7
3 ANGLE GRINDER W/ GUARD
Grinder 7" Angle Turbine Modification
MPT SWO-TG-6085-587T7
Grinder 7" Angle Turbine Modification
7" ANGLE TURBINE GRINDER
MPT TG-6085-587T7
7" ANGLE TURBINE GRINDER
Angle Die Grinder .3HP 20K 1/4IN
SX SAG03S20S
Angle Die Grinder .3HP 20K 1/4IN
Angle Die Grinder, .5HP, 23K, 1/4in Collet
SX SAG05S23S
Angle Die Grinder, .5HP, 23K, 1/4in Collet
Die Grinder, Straight, .7 Hp, 1/4 In.
SX SDG7S25F
Die Grinder, Straight, .7 Hp, 1/4 In.
.83 Multi Ext, RE 18K Pencil Grinder
CL 12L2674-3A
.83 MULTI EXT,RE,18K,1/4" E300- Can be customized with multiple extensions for access to the most far-reaching areas
- Multiple industrial bearings provides optimal balance and power transfer
- Designed to work comfortably with the operator
- Available with 300 series 1/4" (A) 200 series 3/8" collet (B) and 3/8-24" external thread (C)
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 5.3 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination: A - 1/4" Collet C - 3/8" -24 e 12L and 12S have the same throttle configuration
.4 Hp 3 Inch Ext. Die Grinder
DY 43500
.4 hp 3in (76 mm) Extension Die Grinder25,000 RPM, Front Exhaust, 1/4in and 6 mm Collets
Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!
Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
6in Extention. Die Grinder, 25, 000 Rpm
DY 43515
.4 hp 6in (152 mm) Extension Die Grinder25,000 RPM, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler
Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 3in (76 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!
Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
1/4in Die Grinder, 3200 RPM, .4 HP
DY 47201
.4 hp Straight-Line Die Grinder3,200 RPM, Planetary-Geared, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler
.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!
Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.
- HP: 0.4
- Max. RPM: 3200.0
- Motor RPM: 3,200
.4hp 7 Degree Offset Die Ginder
DY 48205
.4 hp 7 Degree Offset Die Grinder25,000 RPM, Gearless, Extended Rear Exhaust, 1/4in and 6mm Collets
One-piece spindle keeps all rotating components on the same centerline for reduced run-out, which means lower vibration levels for enhanced operator comfort.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
.4 hp Straight-Line Die Grinder
DY 48365
.4 hp Straight-Line Die Grinder20,000 RPM, Gearless, Rear Exhaust, 1/8in and 3 mm Collets, Standard Muffler
.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!
Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.
- HP: 0.4
- Max. RPM: 20000.0
- Motor RPM: 20,000
4 In R/A 1 HP 12, 000 RPM Grinder
DY 50302
4in (102 mm) Diameter Right Angle Depressed Center Wheel Grinder1 hp, 12,000 RPM, Rear Exhaust, 3/8in -24 Spindle Thread
Depressed Center Wheel Grinder, for fast weld and stock removal, rust and scale removal, heavy deburring.
4in Diameter, Right Angle, 1 hp, Rear Exhaust, 12,000 RPM.
- HP: 1.0
- Max. RPM: 12000.0
- Motor RPM: 12,000