Grinders
G1 HOR DIE GRINDER-6MM COLLET-REAR EXHAUST
IR G1H200PG4M
G1 HOR DIE GRINDER-6MM COLLET-REAR EXHAUST
Grinder, Extended 1/4in Angle Die
MPT G14990RE4-C4
Grinder, Extended 1/4in Angle Die
1/4In Low Speed Air Die Grinder, Free Speed: 2500 rpm
SUM ST-DG1032L
1/4In Low Speed Air Die Grinder, Free Speed: 2500 rpm
Die Grinder, 23,000 rpm, 1/4 In. 0.5 Hp
SX SDG05S23
Die Grinder, 23,000 rpm, 1/4 In. 0.5 Hp
4 1/2 In R/A 1 Hp 12,000 rpm Grinder
SX SWG10S1245
4 1/2 In R/A 1 Hp 12,000 rpm Grinder
Grinder
CL 216GLFB-250-C4
GRINDER,FE,25K,1/4" COLLET- Designed for demands of heavy industries, such as shipbuilding, foundries, metal fabrication, etc.
- Rugged advanced alloy housing
- Front and side exhaust models available
Exhaust: Front
Type Housing: Aluminum
Weight (lbs): 1.32 lb
All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm
6In R/A 2.2 Hp 8, 400 rpm Grinder
CL 2260AGL-06
GRINDER,RA,8.4K,5/8-11, 6" GUARD- High performance 2.2HP motor, Governed at 8,000 rpm
- Available with 6in, 7in guard options
- Reversible safety lever throttle
- Dual auxiliary handle positions
- Maximum material removal for a right angle grinder
Exhaust: Side
Tool Configuration: Right Angle
Type Housing: Aluminum
Weight (lbs): 7.3 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals
Extended Grinder, Se, 1/4 In Collet
CL 236GEL-240-C4
Extended Grinder, Se, 1/4 In Collet
RIGHT ANGLE GRINDER, RE
CL 236GLR-115A-W3T4
GRINDER,RE,11.5K,4" X1/8" X3/8"- Rugged and durable aluminum housing
- Heavy duty and extended head models available
- Designed for heavy duty material removal applications
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Aluminum
Weight (lbs): 2.43 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 1/2 in / 12.7 mm Standard Equipment: Wheel guard and flange wrench
INLINE GRINDER, EXTENDED, SE
CL 25GELC-180-C4
GRINDER,SE,18K,1/4" COLLET- Lightweight, Ergonomic housing.
- Heavy industrial use for shipyards, foundries, metal fabrication, rail yards, etc.
- Extended housing for hard to reach areas
- Offers higher horsepower and torque levels than similar competitive tools
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 3.09 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/8 in / 9.5 mm Standard Equipment: Wheel guard, flange wrench, Operating instructions & service manual
INLINE GRINDER, EXTENDED, SE
CL 25GELC-180-P3T
GRINDER- Rugged and durable aluminum housing
- Governor speed control maintains RPM under load
- Safety- lock throttle lever prevents accidental start up
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 3.09 lb
All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/8 in / 9.5 mm Standard Equipment: Wheel guard, flange wrench, Operating instructions & service manual
6in Ext. Die Grinder, 25K Rpm
DY 43510
.4 hp 6in (152 mm) Extension Die Grinder25,000 RPM, Front Exhaust, 1/4in and 6 mm Collets
Dynabrade .4 hp (298W) Die Grinder, with extended shafts of 6in (152 mm) for reaching into previously inaccessible areas! These tools allow efficient finishing within deep work-piece channels and difficult passages!
Ideal for rapid material removal, deburring, deflashing, surface preparation, cleaning, finishing and polishing. Models accept optional carbide burrs, abrasive stones, mounted wheels and molded abrasives.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000
.4 Hp Right Angle Die Grinder, 12,000 rpm
DY 46000
.4 hp Right Angle Die Grinder12,000 RPM, Spiral-Geared, Extended Rear Exhaust, 1/4in Collet
All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.
- HP: 0.4
- Max. RPM: 12000.0
- Motor RPM: 12,000
.4 hp Right Angle Die Grinder
DY 47801
.4 hp Right Angle Die Grinder15,000 RPM, Spiral-Geared, Front Exhaust, 1/4in and 6mm Collets
All models have air passage to continually cool the gear box. gears last longer! Pinion piloted on rotor to reduce run-out. Needle bearing assures proper shaft alignment.
Dual wick lubrication system saturated with gear oil for extended gear life over 700 hours. This helps administer the right amount and keep the gear oil on the metal gears. Highest horsepower and torque levels of any similar competitive product.
- HP: 0.4
- Max. RPM: 15000.0
- Motor RPM: 15,000
.4 hp Straight-Line Die Grinder
DY 48201
.4 hp Straight-Line Die Grinder25,000 RPM, Gearless, Rear Exhaust, 1/4in and 6 mm Collets, Extended Muffler
.4 hp Dynabrade Die Grinders are perfect for use on metal, fiberglass, carbon fiber, composites and more! Dynabrade's .4 hp (298 W) Die Grinders are designed for peak efficiency and longer life! Ideal for rapid material removal, deburring, finishing and polishing, these tools represent the finest in Dynabrade quality and innovation!
Integrated Safety-Lock Throttle Lever has a contoured shape for operator comfort, with new dowel-pin that minimizes lever wear. Increased Tool Life due to Unique Pre-Filter that provides extra defense against contaminants in air stream.
- HP: 0.4
- Max. RPM: 25000.0
- Motor RPM: 25,000