Airpower | Grinders

Grinder Vertical

AIM USG-4VL

Grinder Vertical

$1,502.00

.498 TAPERED SHEET METAL PUNCH

AJ 961

.498 TAPERED SHEET METAL PUNCH

$21.15

Dotco, .83 Multi. Ext, Re, 18K, 1/4in E300

CL 12L2674-1A

Dotco, .83 Multi. Ext, Re, 18K, 1/4in E300

$1,229.80

INLINE GRINDER, EXTENDED, 1.4 Hp

CL 25GELC-180-P5T

GRINDER

14,000 - 18,000 RPM 1.4 hp (1.3 kW)

Rugged and durable aluminum housing

Governor speed control maintains RPM under load

Safety- lock throttle lever prevents accidental start up

Air Inlet Size: 3/8 in
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 3.31 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/8 in / 9.5 mm Standard Equipment: Wheel guard, flange wrench, Operating instructions & service manual

$1,823.20

Grinder, Verticle, 3hp, 9in Guard

CL 3060AVL-09

3HP VERT GRD, 6KRPM, 9" GUARD

6,000 RPM 3.0 hp (2.3 kW)

Powerful, governed motor

Ideally suited for the most rugged enviornments

Maximum material removal in an ergonomic package

Air Inlet Size: 1/2 in
Exhaust: Side
Type Housing: Aluminum
Weight (lbs): 10.4 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Minimum Hose I.D.: 3/4 in / 19 mm Standard Equipment: Wheel guard, adapters, spindle wrenches, operating instructions & service manuals

$928.80

Grinder, RA, 12K, 1.7Hp, 5/8 - 11, 4.5in Guard

CL C3120A45-58OH

GRINDER, RA,12K,1.7HP,5/8" -11,4.5" GUARD

12,000 - 13500 RPM 1.7 hp (1.25 kW)

High-performance 1.7Hp motor delivers maximum power

Quick change spindle lock for fast and easy abrasive changes

Quieter operation with rear exhaust overhose standard

Ergonomic, anti-vibration handle for increased comfort and less operator fatigue

Dual-layer, high-impact composite housing for extreme durability

Air Inlet Size: 3/8 in
Exhaust: Rear
Tool Configuration: Right Angle
Weight (lbs): 3.98 lb

$882.70

4 Inch Right Angle Grinder

CL C3135A4-38OH

GRINDER,RA,13.5K,1.7HP,3/8" -24,4" GUARD

12,000 - 13500 RPM 1.7 hp (1.25 kW)

High-performance 1.7Hp motor delivers maximum power

Quick change spindle lock for fast and easy abrasive changes

Quieter operation with rear exhaust overhose standard

Ergonomic, anti-vibration handle for increased comfort and less operator fatigue

Dual-layer, high-impact composite housing for extreme durability

Air Inlet Size: 3/8 in
Exhaust: Rear
Tool Configuration: Right Angle
Weight (lbs): 3.78 lb

$860.00

PIPE-MAX Weld Seam Grinder / Pipe Sander, Electric, 110V, 950-3500 rpm

CSU 38502A

PIPE-MAX Weld Seam Grinder / Pipe Sander, Electric, 110V, 950-3500 rpm

$1,385.25

Grinder, FE, 18K, 1/4in Collet

DC 10L2502-01

GRINDER,FE,18K,1/4" COLLET

12,000 - 23,000 RPM 0.9 hp (0.67 kW)

Durable aluminum housing - Ideal for die/mold and deburring work

Front and rear exhaust models available

Rear exhaust models are " OH" Overhose Ready for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 1.32 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$851.40

RA Sander/Grinder

DC 10LF201-36

RA SNDR/GRD,20K,1/4" COLLET

12,000 - 20,000 RPM 0.4 hp (0.29 kW)

Composite housing

Wide array of speeds; front and rear exhaust models available

Ergonomic and balanced design minimized operator fatigue

OH Option Supplied with 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Front
Type Housing: Aluminum
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$782.60

Grinder, 25000 Rpm, 1/4 Collet

DC 10N2080-01

GRINDER,RE,25K,1/4" COLLET

18,000 - 25,000 RPM 0.6 hp (0.45 kW)

Durable aluminum housing - Ideal for die/mold and deburring work

Front and rear exhaust models available

Rear exhaust models are " OH" Overhose Ready for additional noise suppression

10L with Lock Off Lever 10N does not have a lever and is for mounting / remote start

LH - Left Hand Rotation

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 1.32 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 5/16 in / 7.9 mm Termination -01 = 200 Series collet Termination -36 = 300 series collet

$877.20

Pencil Grinder

DC 10R0401-18

PENCIL GRINDER,60K,1/8" COLLET

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light aluminum weight housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Aluminum
Weight (lbs): 0.22 lb

$574.48

Straight Die Grinder 30, 000

DC 12L1080-36

GRINDR ERGO,RE,30K,1/4" COLLET

12,000 - 34,000 RPM 0.3 hp (0.22 kW)

Durable and ergonomic composite housing - Ideal for die/mold and deburring

Compact size for ultimate control - easy access to confined areas

OH versions include 4' of Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

LH = Left Hand Rotation

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.88 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 6.4 mm

$410.22

Grinder Ergo, fe, 25K, 1/4 COL

DC 12L2000-01

GRINDR ERGO, FE, 25K,1/4 COL

12,000 - 25,000 RPM 0.6 hp (0.45 kW)

Ergonomic composite housing

Front and rear exhaust models available

OH models include 4' Overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

LH = Left Hand Rotation Version

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 1.32 lb

All tools performance rated @ 90psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4in / 6.4mm

$487.62

RA Sander/Grinder, 12K, 1/4in Collet

DC 12LF200-36

RA SNDR/GRD,12K,1/4" COLLET

12,000 - 20,000 RPM 0.4 hp (0.29 kW)

Composite housing

Wide array of speeds; front and rear exhaust models available

Ergonomic and balanced design minimized operator fatigue

OH version includes 4ft overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Front
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$688.00

Right Angle Grinder

DC 12LF280-36

RA SNDR/GRD,RE,12K,1/4" COLLET

12,000 - 20,000 RPM 0.4 hp (0.29 kW)

Composite housing

Wide array of speeds; front and rear exhaust models available

Ergonomic and balanced design minimized operator fatigue

OH version includes 4ft overhose for additional noise suppression

Conversion kits available to add OH Overhose on rear exhaust tools for additional noise suppression

Air Inlet Size: 1/4 in
Exhaust: Rear
Tool Configuration: Right Angle
Type Housing: Composite
Weight (lbs): 1.1 lb

All tools performance rated @ 90 psi / 620 kPa air pressure. Standard Equipment: Applicable collet, collet wrenches Minimum Hose I.D.: 1/4 in / 4.8 mm

$688.00

Pencil Grinder

DC 12R0410-16

GRD,PENCIL,ERGO,60K,3/32" COL

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$632.10

Pencil Grinder

DC 12R0410-18

GRD,PENCIL,ERGO,60K,1/8" COLLET

60,000 RPM 0.1 hp (0.074 kW)

Industrial bearing provides long life expectancy

Designed for precision deburring and metal removal

Compact and light weight composite housing

Roll throttle equipped

Air Inlet Size: 1/8 in
Exhaust: Rear
Tool Configuration: Inline
Type Housing: Composite
Weight (lbs): 0.22 lb

Do not attach a quick-disconnect fitting directly to the tool. Standard Equipment: Applicable collet, collet wrenches, collet guard, 5 ft/1.5 m air supply hose, 1 ft./0.3 m overhose

$529.76

4 hp 7 Degree Offset Die Grinder 25, 000 RPM, Gearless, Front Exhaust

DY 52204

.4 hp 7 Degree Offset Die Grinder

25,000 RPM, Gearless, Front Exhaust, 1/4in and 6mm Collets

Includes 1/4in (01485) and 6 mm (01497) Collet Inserts, fits optional 1/8in (01495), 3 mm (01496)

Kevlar phenolic vanes for longer life. Lightweight ergonomic design for greater comfort and control.

HP: 0.4
Max. RPM: 25000.0
Motor RPM: 25000

$486.00

.5HP, Angle Die Grinder, 20K Rpm, 1/4 Collet, FE, Long Shank

DY 52218

.5 hp 7 Degree Offset Die Grinder

20,000 RPM, Gearless, Front Exhaust, Long Shank, 1/4in and 6mm Collets

High-Quality Air-powered Die Grinder 7 Degree Offset, Short Shank, Gearless

Gearless for reduced maintenance and downtime.

HP: 0.5
Max. RPM: 20000.0
Motor RPM: 20000

$564.30

4in (102 mm) Dia. Robotic Right Angle, Depressed Center Wheel Grinder Kit

DY 52630BK

4in (102 mm) Diameter Robotic Right Angle Depressed Center Wheel Grinder Kit

1.3 hp, 13,500 RPM, Rotational Exhaust, 3/8in -24 Spindle Thread

Motor RPM: 13,200

$4,854.00

5in Right Angle Grinder

DY 52639

5in (127 mm) Diameter Right Angle Depressed Center Wheel Grinder

1.3 hp, 12,000 RPM, Rotational Exhaust, M14 x 2 Spindle Thread

1.3 hp Depressed Center Wheel Grinder is ideal for fast weld and stock removal, heavy deburring, plus rust and scale removal.

12,000 RPM, M14 x2 Spindle Thread.

HP: 1.3
Max. RPM: 12000.0
Motor RPM: 12,000

$910.80

7in Â Vertical Grinder, Type 27

DY 53242

7in (178 mm) Diameter Type 27 Vertical Depressed Center Wheel Grinder

3 hp, 6,000 RPM, Gearless, Rotational Exhaust, 5/8in -11 Spindle Thread

Ideal for heavy-duty applications in foundries and shipyards. Fast stock, rust and scale removal.

Governor-controlled air motor maintains tool RPM under heavy load. Over-speed shut-off feature ensures maximum operator safety. Motor is gearless with less wearable parts, ensuring reduced maintenance and less down-time.

HP: 3.0
Max. RPM: 6000.0
Motor RPM: 6,000

$1,684.80

9 (229 MM) DIA. TYPE 27 VERTICAL DEPRES

DY 53249

9in (229 mm) Diameter Type 27 Vertical Depressed Center Wheel Grinder

3 hp, 6,000 RPM, Gearless, Rotational Exhaust, 5/8in -11 Spindle Thread

Ideal for heavy-duty applications in foundries and shipyards. Fast stock, rust and scale removal.

Governor-controlled air motor maintains tool RPM under heavy load. Over-speed shut-off feature ensures maximum operator safety. Motor is gearless with less wearable parts, ensuring reduced maintenance and less down-time.

HP: 3.0
Max. RPM: 6000.0
Motor RPM: 6,000

$1,701.90

3 in.Dia. Right Angle Type 41 Cut-Off Tool

DY 54730

3 in.Dia. Right Angle Type 41 Cut-Off Tool

$997.00