Hydraullic Units
55.3 Ton Capacity, 6.13 in Stroke, Double-Acting, General Purpose Hydraulic Cylinder
EP RR506
55.3 Ton Capacity, 6.13 in Stroke, Double-Acting, General Purpose Hydraulic CylinderRR-Series Cylinders are the ideal choice whenever you need to retract the plunger quickly with precise control. These popular rams are rugged enough to withstand high-cycle and demanding job site uses - making them incredibly effective within both the construction and manufacturing industries. RR Cylinders are available in long stroke models to Lift or push a load a greater distance, which will save you time and minimize or eliminate the need for temporary cribbing.
The collar thread, plunger thread, base mounting holes, removable saddle and optional accessories make these some of the most versatile cylinders available. Optional accessories include flat, grooved, and tilt saddles on models up to 75-ton. These are secured to the plunger for use both horizontally and upside down.
The RR range is extensive, with capacities ranging from 10 to 500 imperial tons (101 - 5108 kN), and maximum plunger strokes from 2.25" to 48" (57 - 1219 mm). Each RR Cylinder available for sale is rated for up to 10,000 psi (700 bar) and compliant with ASME B30.1.
Applications: Lift, Lower, Push, Pull
- Type: Hydraulic Cylinders
- Max Bar: 700
- Max PSI: 10000
- Product Group: Cylinders and Jacks
- Product Line: Industrial Tools
- Series: RR
- Stroke Inches: 6.13
- Stroke MM: 156
- SubTypes: General Purpose Cylinder
- Collar threads and plunger threads for easy fixturing
- Baked enamel finish for increased corrosion resistance
- Removable hardened saddles protect plunger during lifting and pressing
- Built-in safety valve prevents accidental over-pressurization
- Plunger wiper reduces contamination, extending cylinder life
- CR400 coupler included on all models
- Spare Part(s): RR5013K1, L345045, G586900SR-7000, RR5013KV
- Accessories: CATS100
5T S/A PULL STEEL HYDRAULIC CYLINDER
EP BRC-46
5T S/A PULL STEEL HYDRAULIC CYLINDER6 ft (1, 8 M) Industrial Grade High Pressure Hydraulic Hose, 0.25 In (6, 4 mm ) Internal Diameter
EP HCA6
6 ft (1,8 m) Industrial Grade High Pressure Hydraulic Hose, 0.25 in (6,4 mm) Internal DiameterHCA Industrial Grade .25 (6,4 mm) I.D. series hoses are rated at 10,000 psi (700 bar) operating pressure and 20,000 psi (1380 bar) minimum burst pressure. This hoseis the recommended choice for hand pump & cylinder sets, as well as a wide range of other intermittent applications. All hoses with couplers includes CR215 Dust Cap.
- Type: Hose
- Max Bar: 700
- Max PSI: 10000
- Product Line: Hydraulic Tools
- Series: HCA
- SubTypes: Industrial Grade Hose
6 Ft. Hose, W/ CH-604, 3/8 NPTF, .25 I.D.
EP HC-7206
6 Ft. Hose, W/ CH-604, 3/8 NPTF, .25 I.D.6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP HC9206B
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal DiameterH900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP HC9206
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal DiameterH900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP H9206
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal DiameterH900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP H9206Q
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal DiameterH900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP H9206S
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .25 in. Internal DiameterH900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .38 in. Internal Diameter
EP HC9306
6 ft., Heavy-duty Rubber High Pressure Hydraulic Hose, .38 in. Internal DiameterH900-Series Hydraulic Hoses are designed to comply with the Material Handling Institute IJ100 hose specification. They provide the durability needed for repeated heavy-duty high-pressure applications and offer the optimum combination of flexibility and low &lsquo
6 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP HB7206
6 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal DiameterH700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.
Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.
Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.
A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.
- Type: Hose
- Max Bar: 700
- Max PSI: 10000
- Product Group: Hoses, Pumps
- Product Line: Industrial Tools
- Series: H700
- SubTypes: Thermo-plastic Hose
- For demanding applications, featuring a 4:1 safety factor
- Maximum working pressure of 10,000 psi
- Outside jacket is polyurethane, to provide maximum abrasion resistance
- Exhibits low volumetric expansion under pressure to enhance overall system efficiency
- Vinyl strain relief guard on both ends of hose to improve life and durability on all models.
6 ft., Thermo-Plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP HB7206QB
6 ft., Thermo-Plastic High Pressure Hydraulic Hose, .25 in. Internal DiameterH700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.
Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.
Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.
A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.
- Type: Hose
- Max Bar: 700
- Max PSI: 10000
- Product Group: Hoses, Pumps
- Product Line: Industrial Tools
- Series: H700
- SubTypes: Thermo-plastic Hose
- For demanding applications, featuring a 4:1 safety factor
- Maximum working pressure of 10,000 psi
- Outside jacket is polyurethane, to provide maximum abrasion resistance
- Exhibits low volumetric expansion under pressure to enhance overall system efficiency
- Vinyl strain relief guard on both ends of hose to improve life and durability on all models.
6 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP HC7206B
6 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal DiameterH700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.
Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.
Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.
A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.
- Type: Hose
- Max Bar: 700
- Max PSI: 10000
- Product Group: Hoses, Pumps
- Product Line: Industrial Tools
- Series: H700
- SubTypes: Thermo-plastic Hose
- For demanding applications, featuring a 4:1 safety factor
- Maximum working pressure of 10,000 psi
- Outside jacket is polyurethane, to provide maximum abrasion resistance
- Exhibits low volumetric expansion under pressure to enhance overall system efficiency
- Vinyl strain relief guard on both ends of hose to improve life and durability on all models.
6 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal Diameter
EP H7206
6 ft., Thermo-plastic High Pressure Hydraulic Hose, .25 in. Internal DiameterH700-Series Hoses have a safety factor of 4:1 to provide the reassurance and reliability needed for demanding high-pressure applications.
Each hose contains two layers of steel wire braids covered by a polyurethane sleeve - providing the strength and abrasion resistance needed for repeated use in tough working environments.
Diameters available 0.25 and 0.38 (6.4 and 9.7mm), and connection types include 1/4 NPTF 3/8 NPTF and CH604.
A variety of lengths are available up to 50 ft (15 m), and the vinyl strain relief guard on both ends of hose helps to improve hose life and durability.
- Type: Hose
- Max Bar: 700
- Max PSI: 10000
- Product Group: Hoses, Pumps
- Product Line: Industrial Tools
- Series: H700
- SubTypes: Thermo-plastic Hose
- For demanding applications, featuring a 4:1 safety factor
- Maximum working pressure of 10,000 psi
- Outside jacket is polyurethane, to provide maximum abrasion resistance
- Exhibits low volumetric expansion under pressure to enhance overall system efficiency
- Vinyl strain relief guard on both ends of hose to improve life and durability on all models.