STURTEVANT RICHMONT S13210
STURTEVANT RICHMONT S13210 branded products
TAC2 1800i ERGO Kit w/Charger Base
STR 810921K
STR 810921K
TAC2 1800i ERGO Kit w/Charger Base $3,497.70
Veritorq-2-800 25-300 40-800 Ft. Lb Troque Tester
STR SRT12014
Veritorq-2-800 25-300 40-800 Ft. Lb Troque Tester
$1,149.74
TD1350, 80 in-lbs, 1/4in Male Square Drive
STR 10766
STR 10766
TD1350, 80 in-lbs, 1/4in Male Square Drive Call for pricing
KIT 2100PTA-45 NUT RUNNER 45NM
STR SRT12043EU
STR SRT12043EU
KIT 2100PTA-45 NUT RUNNER 45NM Call for pricing
KIT 2100PTP-12 BRUSHLES DRIVER
STR SRT12048EU
STR SRT12048EU
KIT 2100PTP-12 BRUSHLES DRIVER Call for pricing
KIT 2200PTP-24 TRANSDUCER TOOL
STR SRT12053EU
STR SRT12053EU
KIT 2200PTP-24 TRANSDUCER TOOL Call for pricing
KIT 2200PTP-18 TRANSDUCER TOOL
STR SRT12052EU
STR SRT12052EU
KIT 2200PTP-18 TRANSDUCER TOOL Call for pricing
KIT 2100PTA-90 NUT RUNNER 90NM
STR SRT12045EU
STR SRT12045EU
KIT 2100PTA-90 NUT RUNNER 90NM Call for pricing
TAC750i Repair - this is a serial number
STR 1235301
STR 1235301
TAC750i Repair - this is a serial number Call for pricing
PST 2000 Pressure Sensor Transceiver
STR 10499
STR 10499
PST 2000 Pressure Sensor Transceiver Call for pricing
PST 1200 Hardwired, Pressure Sensor Transceiver
STR 10515
STR 10515
PST 1200 Hardwired, Pressure Sensor Transceiver $2,106.93
Exacta2 Digital Audit Wrench, 75 ft-lb
STR 10551
STR 10551
Exacta2 Digital Audit Wrench, 75 ft-lb $2,460.87
Model STT-150-L
STR 10262
STR 10262
Torque Transducers: L Series
| Model | : | STT-L 150 | |
| Torque Range (ft-lb) | : | 15-150 lbf-ft | |
| Torque Range (nm) | : | 20.3-203.4 Nm | |
| Torque Range (in.lb) | : | 180-1800 lbf in | |
| Torque Range (kgf-cm) | : | 207.4-2073.8 kg cm | |
| Male Hex | : | 0.5 in |
Product Description
- Built-in L-bracket for mounting perpendicular to your surface
- Requires detachable cable Part: 10293
- Mounting holes drilled for 5/16 bolts, 3.25 on center
$2,555.84
STT 600-L Bracket, built-in L-bracket for mounting Vert. or Horiz.
STR 10264
STR 10264
Torque Transducers: L Series
| Model | : | STT-L 600 | |
| Torque Range (ft-lb) | : | 60-600 lbf-ft | |
| Torque Range (nm) | : | 81.3-813.5 Nm | |
| Torque Range (in.lb) | : | 60-600 lbf in | |
| Torque Range (kgf-m) | : | 8.3-83 kg cm | |
| Male Hex | : | 0.75 in |
Product Description
- Built-in L-bracket for mounting perpendicular to your surface
- Requires detachable cable Part: 10293
- Mounting holes drilled for 5/16 bolts, 3.25 on center
$3,232.89
STT-250-L Bracket
STR 10263
STR 10263
Torque Transducers: L Series
| Model | : | STT-L 250 | |
| Torque Range (ft-lb) | : | 25-250 lbf-ft | |
| Torque Range (nm) | : | 34-340 Nm | |
| Torque Range (in.lb) | : | 300-3000 lbf in | |
| Torque Range (kgf-cm) | : | 345.6-3456.4 kg cm | |
| Male Hex | : | 0.75 in |
Product Description
- Built-in L-bracket for mounting perpendicular to your surface
- Requires detachable cable Part: 10293
- Mounting holes drilled for 5/16 bolts, 3.25 on center
$2,555.84
STT 80-P
STR 10289
STR 10289
Torque Transducers: TT and STT Series
| Model | : | STT 80 | |
| Torque Range (ft-lb) | : | 8-80 lbf-ft | |
| Torque Range (nm) | : | 10.8-108.5 Nm | |
| Torque Range (kgf-cm) | : | 110.6-1106 kg cm | |
| Square | : | 0.5 in |
Product Description
- Traditional SR hex flange style
- Can be mounted to ML 250 and ML 600 Mechanical Loaders
- Can be Mounted to Quad Plate for multiple mounting on ML 250
- Detachable cable (Part No: 10293) is required for all transducers
- TT25IO, TT1000 and TT2000 include detachable cable (Part No: 10293)
- Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket
- Smaller sizes (up to 400 in. oz. capacity) can be mounted to SSMB, STMB, or UMB brackets
$2,555.84
TT250io
STR 10012
STR 10012
Torque Transducers: L Series
| Model | : | TT 250IO | |
| Torque Range (cNm) | : | 17.7 - 177 cNM | |
| Torque Range (in-oz) | : | 25 - 250 ozf.in | |
| Square | : | 1/4 in |
Product Description
- Built-in L-bracket for mounting perpendicular to your surface
- Requires detachable cable Part: 10293
- Mounting holes drilled for 5/16 bolts, 3.25 on center
$3,658.80
ML2000
STR 10168
STR 10168
Mechanical Loaders: Mechanical Loaders, ft-lb
| Model | : | ML2000 | |
| Capacity (Nm) | : | 2710 Nm | |
| Capacity (ft.lb) | : | 2000 lbf-ft |
Product Description
- Allows operators to precisely test and calibrate torque wrenches
$39,302.12
Stt-L300I, Transducer, 30-300In Lbs
STR 10260
STR 10260
Torque Transducers: L Series
| Model | : | STT-L 300I | |
| Torque Range (ft-lb) | : | 2.5-25 lbf-ft | |
| Torque Range (nm) | : | 3.4-34 Nm | |
| Torque Range (in.lb) | : | 30-300 lbf in | |
| Torque Range (kgf-cm) | : | 34.5-345 kg cm | |
| Square | : | 0.375 in |
Product Description
- Built-in L-bracket for mounting perpendicular to your surface
- Requires detachable cable Part: 10293
- Mounting holes drilled for 5/16 bolts, 3.25 on center
$1,812.81
TT 1000
STR 10026
STR 10026
Torque Transducers: TT and STT Series
| Model | : | TT 1000 | |
| Torque Range (ft-lb) | : | 100-1000 lbf-ft | |
| Torque Range (nm) | : | 135.6-1355.8 Nm | |
| Torque Range (kgf-m) | : | 14-138.2 kgf cm | |
| Square | : | 1 in |
Product Description
- Traditional SR hex flange style
- Can be mounted to ML 250 and ML 600 Mechanical Loaders
- Can be Mounted to Quad Plate for multiple mounting on ML 250
- Detachable cable (Part No: 10293) is required for all transducers
- TT25IO, TT1000 and TT2000 include detachable cable (Part No: 10293)
- Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket
- Smaller sizes (up to 400 in. oz. capacity) can be mounted to SSMB, STMB, or UMB brackets
$6,794.11
Model Stt-L100I, Transducer, 10-100In Lbs
STR 10259
STR 10259
Torque Transducers: L Series
| Model | : | STT-L 100I | |
| Torque Range (ft-lb) | : | 0.83-8.3 lbf-ft | |
| Torque Range (nm) | : | 1.13-11.3 Nm | |
| Torque Range (in.lb) | : | 10-100 lbf in | |
| Torque Range (kgf-cm) | : | 11.5-115 kg cm | |
| Torque Range (kgf-m) | : | 11.5-115 kg cm | |
| Square | : | 0.375 in |
Product Description
- Built-in L-bracket for mounting perpendicular to your surface
- Requires detachable cable Part: 10293
- Mounting holes drilled for 5/16 bolts, 3.25 on center
$1,812.81
RUNDWN FIX 3Nm 1/4 F HEX
STR 10350
STR 10350
Calibration Equipment Accessories: Rundown Fixtures, Nm
| Model | : | RUNDWN FIX 3Nm 1/4 F HEX | |
| Capacity (Nm) | : | 3 Nm |
Product Description
- Testing pulse and clutch power tools are accomplished by allowing the tool to achieve rotational speed prior to torque measurement
- Include components to emulate either a hard or medium joint, thus assuring greater test accuracy
$452.42
TT 2000, Torque Capacity 2000 ft-lb, 1 in Drive Size
STR 10027
STR 10027
Torque Transducers: TT and STT Series
| Model | : | TT 2000 | |
| Torque Range (ft-lb) | : | 200-2000 lbf-ft | |
| Torque Range (nm) | : | 271.2-2712 Nm | |
| Torque Range (kgf-m) | : | 28-276.5 kg cm | |
| Square | : | 1 in |
Product Description
- Traditional SR hex flange style
- Can be mounted to ML 250 and ML 600 Mechanical Loaders
- Can be Mounted to Quad Plate for multiple mounting on ML 250
- Detachable cable (Part No: 10293) is required for all transducers
- TT25IO, TT1000 and TT2000 include detachable cable (Part No: 10293)
- Larger sizes (500 ft. lbs. and above) can be mounted on UMB L-bracket
- Smaller sizes (up to 400 in. oz. capacity) can be mounted to SSMB, STMB, or UMB brackets
$6,794.11
ML1000, Mechanical Loader, 1000 Ft Lb
STR 10167
STR 10167
Mechanical Loaders: Mechanical Loaders, ft-lb
| Model | : | ML 1000 | |
| Capacity (Nm) | : | 1355 Nm | |
| Capacity (ft.lb) | : | 1000 lbf-ft |
Product Description
- Allows operators to precisely test and calibrate torque wrenches
$36,615.90
Rundown Fixture 1 Nm
STR 10349
STR 10349
Calibration Equipment Accessories: Rundown Fixtures, Nm
| Model | : | RUNDWN FIX 1Nm 1/4 F HEX | |
| Capacity (Nm) | : | 1 Nm |
Product Description
- Testing pulse and clutch power tools are accomplished by allowing the tool to achieve rotational speed prior to torque measurement
- Include components to emulate either a hard or medium joint, thus assuring greater test accuracy
$452.42
RD Fixture
STR 10351
STR 10351
Calibration Equipment Accessories: Rundown Fixtures, Nm
| Model | : | RUNDWN FIX 6Nm 1/4 F HEX | |
| Capacity (Nm) | : | 6 Nm |
Product Description
- Testing pulse and clutch power tools are accomplished by allowing the tool to achieve rotational speed prior to torque measurement
- Include components to emulate either a hard or medium joint, thus assuring greater test accuracy
$452.42
Rundown Fix 68Nm 1/2M Sq. Drive
STR 10355
STR 10355
Calibration Equipment Accessories: Rundown Fixtures, Nm
| Model | : | RUNDWN FIX 68Nm 1/2 M SQ DR | |
| Capacity (Nm) | : | 68 Nm | |
| Hexagon Size | : | 1/2 in |
Product Description
- Testing pulse and clutch power tools are accomplished by allowing the tool to achieve rotational speed prior to torque measurement
- Include components to emulate either a hard or medium joint, thus assuring greater test accuracy
$356.59
Rundown Fixture, 250 Ft Lbs
STR 10358
STR 10358
Calibration Equipment Accessories: Rundown Fixtures, Nm
| Model | : | RUNDWN FIX 339Nm 3/4 M SQ DR | |
| Capacity (Nm) | : | 339 Nm | |
| Hexagon Size | : | 3/4 in |
Product Description
- Testing pulse and clutch power tools are accomplished by allowing the tool to achieve rotational speed prior to torque measurement
- Include components to emulate either a hard or medium joint, thus assuring greater test accuracy
$485.40
TCV 2.4 GHZ
STR 10467
STR 10467
Torque Control Verifiers: Torque Control Verifier
| Product Group | : | Torque Control Verifier | |
| Model | : | TCV-FM 2.4 GHz |
Product Description
- Torque Control Verifier
- I/O driven, batch count can be performed by PLC
- Two SLTC FM-2.4 GHz wrenches can be used simultaneously with the TCV; Double your production or throughput
- Immediately informs operator via lights and a buzzer of proper (Accept) or improper (Reject) wrench use
- 5 pin connector for use with 24 VDC I/O system
- Device Programmer software is included with each TCV and allows the ability to assign the purpose of the outputs
- Easily program tool use specifications through the USB port with supplied software
- Operates on either 110-120 VAC or 220-240 VAC power
$1,730.69
ML-600
STR 10431
STR 10431
Mechanical Loaders: Mechanical Loaders, ft-lb
| Model | : | ML 600 | |
| Capacity (Nm) | : | 813 Nm | |
| Capacity (ft.lb) | : | 600 lbf-ft |
Product Description
- Allows operators to precisely test and calibrate torque wrenches
$13,193.92
Exacta 2 250 QC
STR 10518
STR 10518
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 250 DT QC | |
| Capacity (Nm) | : | 338.9 Nm | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 25.2 in | |
| Head Type | : | Bearing and Spring QS |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,539.47
Exacta 2 25 QC
STR 10521
STR 10521
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 25 QC | |
| Capacity (Nm) | : | 33.8 Nm | |
| Torque Range (ft.lb) | : | 5-25 ft.lbf | |
| Overall Length | : | 16.1 in | |
| Head Type | : | Bearing and Spring QS |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,500.80
Exacta 2-75 Digital Torque Wrench
STR 10522
STR 10522
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 75 QC | |
| Capacity (Nm) | : | 101.5 Nm | |
| Torque Range (ft.lb) | : | 15-75 ft.lbf | |
| Overall Length | : | 19.4 in | |
| Head Type | : | Bearing and Spring QS |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,500.80
Exacta 2 150 QC
STR 10523
STR 10523
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 150 QC | |
| Capacity (in-lb) | : | 203.3 Nm | |
| Torque Range (ft.lb) | : | 30-150 ft.lbf | |
| Overall Length | : | 21.5 in | |
| Head Type | : | Bearing and Spring QS |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,476.64
Torque Wrench, Exacta 2, Digital
STR 10530
STR 10530
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 25 | |
| Capacity (Nm) | : | 33.8 Nm | |
| Torque Range (ft.lb) | : | 5-25 ft.lbf | |
| Overall Length | : | 16.1 in | |
| Head Type | : | Pin and Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,500.80
Exact 2-150 150 Ft Lbs
STR 10532
STR 10532
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 150 QC | |
| Capacity (Nm) | : | 203.3 Nm | |
| Torque Range (ft.lb) | : | 30-150 ft.lbf | |
| Overall Length | : | 21.5 in | |
| Head Type | : | Pin and Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,533.43
Exact Digital Torque Wrench 75 Ft Lbs
STR 10531
STR 10531
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 75 QC | |
| Capacity (Nm) | : | 101.5 Nm | |
| Torque Range (ft.lb) | : | 15-75 ft.lbf | |
| Overall Length | : | 19.4 in | |
| Head Type | : | Pin and Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,500.80
Exacta 250 ft lb Max Digital
STR 10533
STR 10533
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 250 R | |
| Capacity (Nm) | : | 338.9 Nm | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 25.2 in | |
| Head Type | : | Pin and Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,598.68
Exact 2 Torque Wrench 3/4Dr 600Ft Lbs
STR 10534
STR 10534
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 600 R | |
| Capacity (Nm) | : | 813.5 Nm | |
| Torque Range (ft.lb) | : | 120-600 ft.lbf | |
| Overall Length | : | 59.7 in | |
| Head Type | : | Pin and Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$2,610.09
Exacta 2 Torque Wrench, 400Ft/Lbs
STR 10535
STR 10535
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 400 | |
| Capacity (Nm) | : | 543 Nm | |
| Torque Range (ft.lb) | : | 80-400 ft.lbf | |
| Overall Length | : | 35.9 in | |
| Head Type | : | Pin and Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$2,283.83
Exacta 2 – 250 (Pin and Spring) Torque Wrench
STR 10536
STR 10536
Digital Torque Wrenches: Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta 2 250 DT | |
| Capacity (Nm) | : | 338.9 Nm | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 25.2 in | |
| Head Type | : | Pin and Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Residual mode assists the user in determining retained torque on a joint
- Actual accuracy percentage is contingent upon the joint condition and user technique
- Includes a free Certificate of Calibration from our ISO 17025 Accredited Lab
- Ships in a custom, blow-molded plastic case to protect the wrench and serves as an excellent storage space for the wrench
- Large, bright display can be read at arm's length, even in shadow
- Three modes of operation: Track, Peak, and Residual
- Programmable limits with visual notification
$1,598.68
1100 Series Exacta 2 250 DT
STR 10578
STR 10578
Wireless Digital Torque Wrenches: 1100 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1100 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | 1100-Series Exacta 2 250 DT | |
| Capacity (Nm) | : | 338.9 Nm | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Head Type | : | Pin/Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Yellow/Green/Red color scheme informs the operator of tightening status - regardless of tool orientation; Yellow - the torque specification is being approached; Green - The current torque is in the specification; Red - The maximum torque specification has been exceeded
- OK/BAD attribute notification, along with variable data on actual torque and unit of measure on display
- Wireless bi-directional communication with Global 8 controller; downloads specifications, uploads results.English and SI units of measure
- Tools of 150 ft.lb. capacity and below use SR Interchangeable Heads (1 7/16 Common Centerline)
- Tools of 250 ft.lb. capacity and below are available in either the traditional dovetail with pin and spring system for interchangeable heads or the Quick Change system
- Uses four (4) AA rechargeable NiMH batteries, thousands of cycles between battery charges
- Batteries and Charger not included
- Includes a lightweight and rugged blow-molded storage/carrying case
- Includes FREE certificate of calibration (unit of measure: Ft. Lb.) from our ISO/IEC 17025 Accredited Calibration Laboratory!
$2,736.51
Exacta II 1100 Series 400
STR 10580
STR 10580
Wireless Digital Torque Wrenches: 1100 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1100 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1100 Series 400 | |
| Capacity (Nm) | : | 542 Nm | |
| Torque Range (ft.lb) | : | 80-400 ft.lbf | |
| Head Type | : | Pin/Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Yellow/Green/Red color scheme informs the operator of tightening status - regardless of tool orientation; Yellow - the torque specification is being approached; Green - The current torque is in the specification; Red - The maximum torque specification has been exceeded
- OK/BAD attribute notification, along with variable data on actual torque and unit of measure on display
- Wireless bi-directional communication with Global 8 controller; downloads specifications, uploads results.English and SI units of measure
- Tools of 150 ft.lb. capacity and below use SR Interchangeable Heads (1 7/16 Common Centerline)
- Tools of 250 ft.lb. capacity and below are available in either the traditional dovetail with pin and spring system for interchangeable heads or the Quick Change system
- Uses four (4) AA rechargeable NiMH batteries, thousands of cycles between battery charges
- Batteries and Charger not included
- Includes a lightweight and rugged blow-molded storage/carrying case
- Includes FREE certificate of calibration (unit of measure: Ft. Lb.) from our ISO/IEC 17025 Accredited Calibration Laboratory!
$3,219.43
1100 Series Exacta 25
STR 10581
STR 10581
Wireless Digital Torque Wrenches: 1100 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1100 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | 1100-Series Exacta 25 | |
| Capacity (Nm) | : | 33.8 Nm | |
| Torque Range (ft.lb) | : | 5-25 ft.lbf | |
| Head Type | : | Pin/Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Yellow/Green/Red color scheme informs the operator of tightening status - regardless of tool orientation; Yellow - the torque specification is being approached; Green - The current torque is in the specification; Red - The maximum torque specification has been exceeded
- OK/BAD attribute notification, along with variable data on actual torque and unit of measure on display
- Wireless bi-directional communication with Global 8 controller; downloads specifications, uploads results.English and SI units of measure
- Tools of 150 ft.lb. capacity and below use SR Interchangeable Heads (1 7/16 Common Centerline)
- Tools of 250 ft.lb. capacity and below are available in either the traditional dovetail with pin and spring system for interchangeable heads or the Quick Change system
- Uses four (4) AA rechargeable NiMH batteries, thousands of cycles between battery charges
- Batteries and Charger not included
- Includes a lightweight and rugged blow-molded storage/carrying case
- Includes FREE certificate of calibration (unit of measure: Ft. Lb.) from our ISO/IEC 17025 Accredited Calibration Laboratory!
$2,495.05
1100 Series Exacta 2 75
STR 10582
STR 10582
Wireless Digital Torque Wrenches: 1100 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1100 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | 1100-Series Exacta 75 | |
| Capacity (Nm) | : | 101.5 Nm | |
| Torque Range (ft.lb) | : | 15-75 ft.lbf | |
| Head Type | : | Pin/Spring |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Yellow/Green/Red color scheme informs the operator of tightening status - regardless of tool orientation; Yellow - the torque specification is being approached; Green - The current torque is in the specification; Red - The maximum torque specification has been exceeded
- OK/BAD attribute notification, along with variable data on actual torque and unit of measure on display
- Wireless bi-directional communication with Global 8 controller; downloads specifications, uploads results.English and SI units of measure
- Tools of 150 ft.lb. capacity and below use SR Interchangeable Heads (1 7/16 Common Centerline)
- Tools of 250 ft.lb. capacity and below are available in either the traditional dovetail with pin and spring system for interchangeable heads or the Quick Change system
- Uses four (4) AA rechargeable NiMH batteries, thousands of cycles between battery charges
- Batteries and Charger not included
- Includes a lightweight and rugged blow-molded storage/carrying case
- Includes FREE certificate of calibration (unit of measure: Ft. Lb.) from our ISO/IEC 17025 Accredited Calibration Laboratory!
$2,495.05
1100 Series Exacta 600 R
STR 10585
STR 10585
Wireless Digital Torque Wrenches: 1100 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1100 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | 1100-Series Exacta 600 R (3/4 in Square Drive) | |
| Capacity (Nm) | : | 813 Nm | |
| Torque Range (ft.lb) | : | 120-600 ft.lbf | |
| Head Type | : | Racheting |
Product Description
- Meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
- Yellow/Green/Red color scheme informs the operator of tightening status - regardless of tool orientation; Yellow - the torque specification is being approached; Green - The current torque is in the specification; Red - The maximum torque specification has been exceeded
- OK/BAD attribute notification, along with variable data on actual torque and unit of measure on display
- Wireless bi-directional communication with Global 8 controller; downloads specifications, uploads results.English and SI units of measure
- Tools of 150 ft.lb. capacity and below use SR Interchangeable Heads (1 7/16 Common Centerline)
- Tools of 250 ft.lb. capacity and below are available in either the traditional dovetail with pin and spring system for interchangeable heads or the Quick Change system
- Uses four (4) AA rechargeable NiMH batteries, thousands of cycles between battery charges
- Batteries and Charger not included
- Includes a lightweight and rugged blow-molded storage/carrying case
- Includes FREE certificate of calibration (unit of measure: Ft. Lb.) from our ISO/IEC 17025 Accredited Calibration Laboratory!
$3,702.34
GIM 400
STR 10611
STR 10611
Torque Controller Systems Accessories: Global Multiplier 400
| Product Group | : | Global Multiplier 400 | |
| Model | : | GIM 400 | |
| Connection Type | : | Windows Based |
Product Description
- Quickly adds unique value to your error-proofing operations
- Easy to install and is virtually a PLC that can be configured via the Windows-based Global Manager software
- You won't need to pay someone to program the GIM 40, easy do it yourself
- Sixteen (16) inputs and outputs with LED indicators to make installation easier
- Can be configured for up to 100 binary I/O in conjunction with a PLC
- Corresponding faceplate lights make it easy to install and troubleshoot the configuration of the circuits
- Peripheral devices like light stacks, socket trays, etc that need power, can be powered by the GIM 400
- The GIM 400 gives you control and flexibility over your assembly processes in ways no other system provides
- The Global 400 and GIM 400 error-proofing power duo organizes, manages, directs, and guides the operator, the tools, and multi-step jobs
$1,805.94
GLOBAL HOST SOFTWARE (UP TO 10 SEATS)
STR 10622
STR 10622
Torque Controller Software: SR GlobalHost Reporting Software
| Product Group | : | SR GlobalHost Reporting Software | |
| Model | : | Global Host Software (Up to 10 seats) |
Product Description
- With Global Host, you can consolidate all torque data from all torque tools into one database
- Global Host is network failure agnostic; Because Global Host is subscribed to each controller and tool on the network, it constantly polls each element on the network and knows the status and count of each tool
- Web-based reporting, anywhere in the network, is available in real-time
- Export to Excel, Power BI, Access, Tableau, or other programs to sort and parse data; There is additional data that you may not want visible on the display
- More seats are available for purchase. Contact customer service for pricing.
$7,350.00
Digital Torque Wrench 1200 Series Exacta
STR 10647
STR 10647
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 75 QC | |
| Torque Range (ft.lb) | : | 15-75 ft.lbf | |
| Overall Length | : | 19.4 in | |
| Head Type | : | Pin/Spring |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$2,557.65
Digital Torque Wrench 1200 Series 150
STR 10648
STR 10648
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 150 QC | |
| Torque Range (ft.lb) | : | 30-150 ft.lbf | |
| Overall Length | : | 21.5 in | |
| Head Type | : | Pin/Spring |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$2,774.66
Digital Torque Wrench 1200 Series Exacta
STR 10649
STR 10649
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 250 R (1/2 inch Square Drive) | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 25.2 in | |
| Head Type | : | Racheting |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$3,022.68
Digital Torque Wrench 1200 Series Exacta
STR 10650
STR 10650
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 400 R | |
| Torque Range (ft.lb) | : | 80-400 ft.lbf | |
| Overall Length | : | 36.9 in | |
| Head Type | : | Pin/Spring |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$3,410.21
Digital Torque Wrench 1200 Series Exacta
STR 10651
STR 10651
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 600 R (3/4 inch Square Drive) | |
| Torque Range (ft.lb) | : | 120-600 ft.lbf | |
| Overall Length | : | 59.7 in | |
| Head Type | : | Racheting |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$4,030.24
Exacta II 1250 Series 250
STR 10655
STR 10655
Wireless Digital Torque Wrenches: 1250 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1250 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1250 Series 250 R (1/2 inch Square Drive) | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 25.2 in | |
| Head Type | : | Racheting |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$3,890.73
Exacta II 1200 Series 250 DT
STR 10658
STR 10658
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 250 DT Q | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 25.2 in | |
| Head Type | : | Pin/Spring |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$2,852.17
Digital Torque Wrench 1200 Series Exacta
STR 10662
STR 10662
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 25 QC | |
| Torque Range (ft.lb) | : | 5-25 ft.lbf | |
| Overall Length | : | 16.1 in | |
| Head Type | : | Quick Change |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$2,557.65
Digital Torque Wrench 1200 Series Exacta
STR 10663
STR 10663
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 75 QC | |
| Torque Range (ft.lb) | : | 15-75 ft.lbf | |
| Overall Length | : | 19.4 in | |
| Head Type | : | Quick Change |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$2,557.65
Digital Torque Wrench 1200 Series Exacta
STR 10664
STR 10664
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 150 QC | |
| Torque Range (ft.lb) | : | 30-150 ft.lbf | |
| Overall Length | : | 21.5 in | |
| Head Type | : | Quick Change |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$2,774.66
Digital Torque Wrench 1200 Series Exacta
STR 10665
STR 10665
Wireless Digital Torque Wrenches: 1200 Series Exacta 2 Digital Torque Wrench, ft-lb
| Product Group | : | 1200 Series Exacta 2 Digital Torque Wrench, ft-lb | |
| Model | : | Exacta II 1200 Series 250 DT Q | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 25.2 in | |
| Head Type | : | Quick Change |
Product Description
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque.
- Torque and angle can identify changing joint conditions and prevent errors
- Backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application
- Turns yellow at 90% of target torque, green upon reaching target torque and red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400m
- P-Sets are set and saved via the controller, no changes can be made at the wrench level
- Provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
- Wrenches are available in traditional pin and spring dovetail, quick change, and fixed ratchet models
$2,852.17
Battery Pack Charger NIMH
STR 10673
STR 10673
Wireless Digital Torque Wrench Accessories: Wireless Torque Wrench, Batter Pack and Charger
| Product Group | : | Wireless Torque Wrench, Batter Pack and Charger | |
| Model | : | Battery Pack Charger, NiMH | |
| Battery Type | : | NiMH Rechargeable |
Product Description
$69.76
DTC-4 Digital Torque And Angle Wrench, 50 in Lbs
STR 10680
STR 10680
Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb
| Product Group | : | DTC Digital Torque and Angle Wrench, ft-lb | |
| Model | : | DTC-4 | |
| Capacity (Nm) | : | 5.6 Nm | |
| Capacity (in-lb) | : | ||
| Torque Range (ft.lb) | : | 0.8-4 ft.lbf | |
| Overall Length | : | 15.81 in | |
| Head Type | : | Dovetail Pin/Spring |
Product Description
- Limiting torque value to wrench capacity
- Black and white display and colored light bands on the side of the wrench
- Bands change yellow to green when the target values are achieved
- Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
- Results log large enough for even the busiest assemblies
- Holds 1000 torque results and results can be downloaded
- Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
- Can be used to set parameters in the wrench
- Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
- DTC CONNECT is freeware and is included in the DTC
$1,191.13
DTC-25 Digital Torque And Angle Wrench, 300 in Lbs
STR 10681
STR 10681
Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb
| Product Group | : | DTC Digital Torque and Angle Wrench, ft-lb | |
| Model | : | DTC-25 | |
| Capacity (Nm) | : | 33.9 Nm | |
| Capacity (in-lb) | : | ||
| Torque Range (ft.lb) | : | 5-25 ft.lbf | |
| Overall Length | : | 16.99 in | |
| Head Type | : | Dovetail Pin/Spring |
Product Description
- Limiting torque value to wrench capacity
- Black and white display and colored light bands on the side of the wrench
- Bands change yellow to green when the target values are achieved
- Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
- Results log large enough for even the busiest assemblies
- Holds 1000 torque results and results can be downloaded
- Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
- Can be used to set parameters in the wrench
- Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
- DTC CONNECT is freeware and is included in the DTC
$1,206.39
DTC-250 Digital Torque Wrench, Interchangable Head, 3000 in Lbs
STR 10684
STR 10684
Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb
| Product Group | : | DTC Digital Torque and Angle Wrench, ft-lb | |
| Model | : | DTC-250 | |
| Capacity (Nm) | : | 338.9 Nm | |
| Capacity (in-lb) | : | ||
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 30 in | |
| Head Type | : | Dovetail Pin/Spring |
Product Description
- Limiting torque value to wrench capacity
- Black and white display and colored light bands on the side of the wrench
- Bands change yellow to green when the target values are achieved
- Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
- Results log large enough for even the busiest assemblies
- Holds 1000 torque results and results can be downloaded
- Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
- Can be used to set parameters in the wrench
- Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
- DTC CONNECT is freeware and is included in the DTC
$1,271.96
DTC-80 Digital Torque Wrench
STR 10686
STR 10686
Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb
| Product Group | : | DTC Digital Torque and Angle Wrench, ft-lb | |
| Model | : | DTC-80 | |
| Capacity (Nm) | : | 108.47 Nm | |
| Capacity (in-lb) | : | ||
| Torque Range (ft.lb) | : | 16-80 ft.lbf | |
| Overall Length | : | 18.61 in | |
| Head Type | : | Dovetail Pin/Spring |
Product Description
- Limiting torque value to wrench capacity
- Black and white display and colored light bands on the side of the wrench
- Bands change yellow to green when the target values are achieved
- Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
- Results log large enough for even the busiest assemblies
- Holds 1000 torque results and results can be downloaded
- Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
- Can be used to set parameters in the wrench
- Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
- DTC CONNECT is freeware and is included in the DTC
$1,271.96
Torque Tester
STR 10692
STR 10692
Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb
| Model | : | TORQ-TRONICS 2 6NM-50I | |
| Hexagon Size | : | 1/4 in | |
| Torque Range (nm) | : | 0.6-6 Nm |
Product Description
- Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
- Meets or exceeds requirements of ASME B107.300-2010
- Tests in both clockwise and counterclockwise directions
- Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
- Units of measure include English, Standard International, and metric
- Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
- Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
- Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
- Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
- Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
- Runs on four AA NiMH rechargeable batteries
- Batteries are sold separately
- Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
- Includes a free blow-molded plastic box for storage and transit
- Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
- An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
- One end of the strap is screwed into the power outlet where your test instrument is plugged in
- Other end of the strap attaches to the base of your test instrument
- Anti-static strap is an integral part of your calibration instrument operation and is required for operation
- 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
- 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870779
$2,749.06
Torque Tester
STR 10691
STR 10691
Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb
| Model | : | TORQ-TRONICS 2 -10I | |
| Hexagon Size | : | 1/4 in | |
| Torque Range (nm) | : | 0.1-1 Nm |
Product Description
- Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
- Meets or exceeds requirements of ASME B107.300-2010
- Tests in both clockwise and counterclockwise directions
- Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
- Units of measure include English, Standard International, and metric
- Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
- Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
- Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
- Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
- Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
- Runs on four AA NiMH rechargeable batteries
- Batteries are sold separately
- Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
- Includes a free blow-molded plastic box for storage and transit
- Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
- An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
- One end of the strap is screwed into the power outlet where your test instrument is plugged in
- Other end of the strap attaches to the base of your test instrument
- Anti-static strap is an integral part of your calibration instrument operation and is required for operation
- 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
- 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870778
$2,749.06
Torq-Tronics 2, 12Nm - 100in-lb
STR 10693
STR 10693
Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb
| Model | : | TORQ-TRONICS 2 12NM-100INLB | |
| Hexagon Size | : | 3/8 in | |
| Torque Range (nm) | : | 1.2-12 Nm |
Product Description
- Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
- Meets or exceeds requirements of ASME B107.300-2010
- Tests in both clockwise and counterclockwise directions
- Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
- Units of measure include English, Standard International, and metric
- Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
- Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
- Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
- Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
- Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
- Runs on four AA NiMH rechargeable batteries
- Batteries are sold separately
- Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
- Includes a free blow-molded plastic box for storage and transit
- Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
- An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
- One end of the strap is screwed into the power outlet where your test instrument is plugged in
- Other end of the strap attaches to the base of your test instrument
- Anti-static strap is an integral part of your calibration instrument operation and is required for operation
- 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
- 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870780
$2,749.06
Torq-Tronics 2, 34Nm, 300in-lbs
STR 10694
STR 10694
Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb
| Model | : | TORQ-TRONICS 2 34NM-300INLB | |
| Hexagon Size | : | 3/8 in | |
| Torque Range (nm) | : | 3.4-34 Nm |
Product Description
- Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
- Meets or exceeds requirements of ASME B107.300-2010
- Tests in both clockwise and counterclockwise directions
- Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
- Units of measure include English, Standard International, and metric
- Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
- Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
- Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
- Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
- Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
- Runs on four AA NiMH rechargeable batteries
- Batteries are sold separately
- Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
- Includes a free blow-molded plastic box for storage and transit
- Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
- An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
- One end of the strap is screwed into the power outlet where your test instrument is plugged in
- Other end of the strap attaches to the base of your test instrument
- Anti-static strap is an integral part of your calibration instrument operation and is required for operation
- 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
- 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870781
$2,749.06
Torq-Tronics 2 , 150 Ft Lb
STR 10696
STR 10696
Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb
| Model | : | TORQ-TRONICS 2 150 FT LB (1/2 in) | |
| Torque Range (ft-lb) | : | 15-150 lbf-ft | |
| Torque Range (nm) | : | 20.1-201 Nm |
Product Description
- Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
- Meets or exceeds requirements of ASME B107.300-2010
- Tests in both clockwise and counterclockwise directions
- Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
- Units of measure include English, Standard International, and metric
- Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
- Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
- Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
- Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
- Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
- Runs on four AA NiMH rechargeable batteries
- Batteries are sold separately
- Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
- Includes a free blow-molded plastic box for storage and transit
- Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
- An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
- One end of the strap is screwed into the power outlet where your test instrument is plugged in
- Other end of the strap attaches to the base of your test instrument
- Anti-static strap is an integral part of your calibration instrument operation and is required for operation
- 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
- 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870779
$3,102.51
Torq-Tronics 2 Digital Torque Tester, 250Ft-Lb
STR 10697
STR 10697
Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb
| Model | : | TORQ-TRONICS 2 250 FT LB (3/4 in) | |
| Torque Range (ft-lb) | : | 25-250 lbf-ft | |
| Torque Range (nm) | : | 33.9-339 Nm |
Product Description
- Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
- Meets or exceeds requirements of ASME B107.300-2010
- Tests in both clockwise and counterclockwise directions
- Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
- Units of measure include English, Standard International, and metric
- Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
- Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
- Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
- Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
- Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
- Runs on four AA NiMH rechargeable batteries
- Batteries are sold separately
- Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
- Includes a free blow-molded plastic box for storage and transit
- Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
- An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
- One end of the strap is screwed into the power outlet where your test instrument is plugged in
- Other end of the strap attaches to the base of your test instrument
- Anti-static strap is an integral part of your calibration instrument operation and is required for operation
- 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
- 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870780
$3,259.60
SR Connect
STR 10710
STR 10710
Wireless Digital Torque Wrench Accessories: Wireless Digital Torque Wrench, Radio Interface
| Product Group | : | Wireless Digital Torque Wrench, Radio Interface | |
| Model | : | SR Connect | |
| Connection Type | : | Xbee |
Product Description
$781.06
Battery Tester w/ Fast Charge, 4-Slot
STR 10742
STR 10742
Wireless Torque Screwdrivers: Battery charging units and battery tester charger
| Product Group | : | Battery charging units and battery tester charger | |
| Model | : | AA/AAA Battery Tester Charger |
Product Description
- Four slot battery charger for TAC Torque Wrench
$123.09
1350 Exacta 5
STR 10780
STR 10780
Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb
| Product Group | : | 1350 Series Digital Torque and Angle Wrench, ft-lb | |
| Model | : | 1350 Series Exacta 2-5 | |
| Capacity (Nm) | : | 6.7 Nm | |
| Torque Range (ft.lb) | : | 1-5 ft.lbf | |
| Overall Length | : | 13.13 in | |
| Head Type | : | Pin/Spring |
Product Description
- Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
- Torque and angle can identify changing joint conditions and prevent errors
- The torque-only functionality includes Track and Peak modes of operation
- The backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400mp
- P-Sets are set and saved via the controller
- No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
$3,332.70
FN-17Mm Flare Nut Head Only
STR 809223
STR 809223
Flare Nut Interchangeable Heads for Torque Wrenches
| Model | : | FN 17MM | |
| Capacity | : | 54 Nm | |
| Dimensions Insert | : | 17 mm |
| A | : | 53.34 mm | |
| B | : | 33.02 mm | |
| C | : | 15.24 mm | |
| D | : | 25.40 mm | |
| E | : | 20.32 mm |
Product Description
- One piece, cast, proprietary steel selection
- All of our heads fit on all of our wrenches
- Our smallest head fits on our largest wrench
- Our largest head fits on our smallest wrench
- Fewer wrenches to buy, calibrate, repair, and manage
- No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
- Sturtevant Richmont interchangeable heads have two common centerlines
- Typically for sizes 32 mm and below the common centerline is 365 mm
- Sizes larger than 33 mm the common centerline extends to 984 mm
$121.76
FN 14MM
STR 809220
STR 809220
Flare Nut Interchangeable Heads for Torque Wrenches
| Model | : | FN 14MM | |
| Capacity | : | 40 Nm | |
| Dimensions Insert | : | 14 mm |
| A | : | 50.8 mm | |
| B | : | 27.94 mm | |
| C | : | 12.70 mm | |
| D | : | 25.40 mm | |
| E | : | 20.32 mm |
Product Description
- One piece, cast, proprietary steel selection
- All of our heads fit on all of our wrenches
- Our smallest head fits on our largest wrench
- Our largest head fits on our smallest wrench
- Fewer wrenches to buy, calibrate, repair, and manage
- No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
- Sturtevant Richmont interchangeable heads have two common centerlines
- Typically for sizes 32 mm and below the common centerline is 365 mm
- Sizes larger than 33 mm the common centerline extends to 984 mm
$121.76
Exacta 1350-25 AA
STR 10981
STR 10981
Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb
| Product Group | : | 1350 Series Digital Torque and Angle Wrench, ft-lb | |
| Model | : | 1350 Series Exacta 2-25 AA | |
| Capacity (Nm) | : | 33.9 Nm | |
| Torque Range (ft.lb) | : | 5-25 ft.lbf | |
| Overall Length | : | 14.88 in | |
| Head Type | : | Pin/Spring |
Product Description
- Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
- Torque and angle can identify changing joint conditions and prevent errors
- The torque-only functionality includes Track and Peak modes of operation
- The backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400mp
- P-Sets are set and saved via the controller
- No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
$3,255.56
1350 Exacta - 75
STR 10782
STR 10782
Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb
| Product Group | : | 1350 Series Digital Torque and Angle Wrench, ft-lb | |
| Model | : | 1350 Series Exacta 2-75 | |
| Capacity (Nm) | : | 101.7 Nm | |
| Torque Range (ft.lb) | : | 15-75 ft.lbf | |
| Overall Length | : | 16.5 in | |
| Head Type | : | Pin/Spring |
Product Description
- Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
- Torque and angle can identify changing joint conditions and prevent errors
- The torque-only functionality includes Track and Peak modes of operation
- The backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400mp
- P-Sets are set and saved via the controller
- No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
$3,332.70
FN-13Mm Flare Nut Head
STR 809219
STR 809219
Flare Nut Interchangeable Heads for Torque Wrenches
| Model | : | FN 13MM | |
| Capacity | : | 33 Nm | |
| Dimensions Insert | : | 13 mm |
| A | : | 48.26 mm | |
| B | : | 25.4 mm | |
| C | : | 10.16 mm | |
| D | : | 22.86 mm | |
| E | : | 20.32 mm |
Product Description
- One piece, cast, proprietary steel selection
- All of our heads fit on all of our wrenches
- Our smallest head fits on our largest wrench
- Our largest head fits on our smallest wrench
- Fewer wrenches to buy, calibrate, repair, and manage
- No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
- Sturtevant Richmont interchangeable heads have two common centerlines
- Typically for sizes 32 mm and below the common centerline is 365 mm
- Sizes larger than 33 mm the common centerline extends to 984 mm
$121.76
1350 Exacta - 75 QC
STR 10788
STR 10788
Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb
| Product Group | : | 1350 Series Digital Torque and Angle Wrench, ft-lb | |
| Model | : | 1350 Series Exacta 2-75 QC | |
| Capacity (Nm) | : | 101.7 Nm | |
| Torque Range (ft.lb) | : | 15-75 ft.lbf | |
| Overall Length | : | 16.5 in | |
| Head Type | : | Quick Change |
Product Description
- Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
- Torque and angle can identify changing joint conditions and prevent errors
- The torque-only functionality includes Track and Peak modes of operation
- The backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400mp
- P-Sets are set and saved via the controller
- No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
$3,332.70
Exacta 1350-250 QC
STR 10790
STR 10790
Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb
| Product Group | : | 1350 Series Digital Torque and Angle Wrench, ft-lb | |
| Model | : | 1350 Series Exacta 2-250 QC | |
| Capacity (Nm) | : | 33.9 Nm | |
| Torque Range (ft.lb) | : | 50-250 ft.lbf | |
| Overall Length | : | 27.88 in | |
| Head Type | : | Quick Change |
Product Description
- Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
- Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
- Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
- Torque and angle can identify changing joint conditions and prevent errors
- The torque-only functionality includes Track and Peak modes of operation
- The backlit display is easy to read in any light condition
- Customizable color display change to inform the operator
- Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
- Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
- Tool emits reject tone upon reaching maximum torque
- Compatible with the Global 400 and Global 400mp
- P-Sets are set and saved via the controller
- No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
- Can be used with the Patented Holding Tool Series
$3,720.23