STURTEVANT RICHMONT S13210

STR 10680

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10681

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10683

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10682

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10684

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10686

Digital Torque Wrenches: DTC Digital Torque and Angle Wrench, ft-lb

Product Description

• Limiting torque value to wrench capacity
• Black and white display and colored light bands on the side of the wrench
• Bands change yellow to green when the target values are achieved
• Auditory beep and vibrating handle provide two additional modes of operator-focused error-proofing guidance
• Results log large enough for even the busiest assemblies
• Holds 1000 torque results and results can be downloaded
• Using the mini-USB port, and DTC Connect Freeware, the results log can be uploaded to a computer in a CSV format
• Can be used to set parameters in the wrench
• Change units of measure, modes of operation, degrees of fastener rotation, establish a target torque, minimum torque, maximum torque, and more
• DTC CONNECT is freeware and is included in the DTC

STR 10692

Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870779

STR 10691

Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870778

STR 10693

Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870780

STR 10694

Torque Testers: Torq-Tronics 2 Digital Torque Testers, in-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870781

STR 10695

Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870778

STR 10696

Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870779

STR 10697

Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like thisA quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870780

STR 10698

Torque Testers: Torq-Tronics 2 Digital Torque Testers, ft-lb

Product Description

• Accuracy of +/- .5% of Indicated Value in clockwise and counterclockwise directions from 10% to 100% of rated capacity
• Meets or exceeds requirements of ASME B107.300-2010
• Tests in both clockwise and counterclockwise directions
• Four modes of operation providing excellent versatility: Track, Peak, Initial Peak, and Power Tool
• Units of measure include English, Standard International, and metric
• Units of 300 inch-pound (34 Nm) capacity and below are optimized for bench mounting; larger units may be mounted vertically or horizontally, providing better safety and efficiency
• Simple to operate, memory stores up to 999 records that can be downloaded to Hyper-Terminal or terminal type program to create testing reports and data storage
• Four-line vacuum fluorescent display (VFD) is easy to read.- Red/Green LED indicates whether a measurement is within the target torque value
• Includes FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory
• Includes 110-220 VAC to 6 VDC screw-on power supply for security during power tool testing
• Runs on four AA NiMH rechargeable batteries
• Batteries are sold separately
• Industrial assembly tools use rechargeable batteries like this. A quick charge unit for batteries is available
• Includes a free blow-molded plastic box for storage and transit
• Power Tool mode has ten filters and will accurately test all clutch types and pulse tools
• An anti-Static strap included with your TorqTronics 2 or System 8 is there to ensure limited electronic interference
• One end of the strap is screwed into the power outlet where your test instrument is plugged in
• Other end of the strap attaches to the base of your test instrument
• Anti-static strap is an integral part of your calibration instrument operation and is required for operation
• 10695, 10696: Comes with .375" or 3/8 inch adapter at no additional charge - Part number 870777
• 10697, 10698: Comes with .5" or 1/2 inch adapter at no additional charge - Part number 870781

STR 10710

Wireless Digital Torque Wrench Accessories: Wireless Digital Torque Wrench, Radio Interface

Product Description

STR 10984

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10742

Wireless Torque Screwdrivers: Battery charging units and battery tester charger

Product Description

• Four slot battery charger for TAC Torque Wrench

STR 10780

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 809223

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 10772

Wireless Torque Screwdrivers: 1350 Digital Torque and Angle Torque Diver, in-oz

Product Description

• Compatible with the Global 400 and Global 400mp; Perfect for lower torque applications when you need accuracy and traceability
• Error proofing feature: parameters cannot be set using the buttons on the torque screwdriver
• XBee radio 2.4 GHz - 12 channels
• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp

STR 809227

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809228

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809220

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 10981

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10782

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 809230

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809219

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 10788

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 809224

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 10790

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10781

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10770

Wireless Torque Screwdrivers: 1350 Digital Torque and Angle Torque Diver, in-lb

Product Description

• Compatible with the Global 400 and Global 400mp
• Perfect for lower torque applications when you need accuracy and traceability
• Error proofing feature: parameters cannot be set using the buttons on the torque screwdriver
• XBee radio 2.4 GHz - 12 channels
• Modes of operation: Peak, TAM, T2A, Residual
• Meets/exceeds ASME B107.300-2010 and ISO 6789
• Bi-directional +/- 2% Indicated Value from 5% to 100% of tool capacity
• The display back light is visible when torque is applied; Displays the torque and angle value on the digital display on the screwdriver
• Visible from any angle, light band on the driver turns yellow, then green, the driver beeps, and the handle vibrates when target torque is achieved
• Female and male hexagon versions as well as square drive version gives you flexibility to meet all of your torque driver application needs
• ESD Compliant when grounding strap is properly worn
• Powered by 1 AA NiMH battery (two included with driver)
• Compatible with NiMH batteries only
• Units of measure: in-oz, in-lb, ft-lb, cNm, NM, cmkg

STR 10771

Wireless Torque Screwdrivers: 1350 Digital Torque and Angle Torque Diver, in-lb

Product Description

• Compatible with the Global 400 and Global 400mp
• Perfect for lower torque applications when you need accuracy and traceability
• Error proofing feature: parameters cannot be set using the buttons on the torque screwdriver
• XBee radio 2.4 GHz - 12 channels
• Modes of operation: Peak, TAM, T2A, Residual
• Meets/exceeds ASME B107.300-2010 and ISO 6789
• Bi-directional +/- 2% Indicated Value from 5% to 100% of tool capacity
• The display back light is visible when torque is applied; Displays the torque and angle value on the digital display on the screwdriver
• Visible from any angle, light band on the driver turns yellow, then green, the driver beeps, and the handle vibrates when target torque is achieved
• Female and male hexagon versions as well as square drive version gives you flexibility to meet all of your torque driver application needs
• ESD Compliant when grounding strap is properly worn
• Powered by 1 AA NiMH battery (two included with driver)
• Compatible with NiMH batteries only
• Units of measure: in-oz, in-lb, ft-lb, cNm, NM, cmkg

STR 10769

Wireless Torque Screwdrivers: 1350 Digital Torque and Angle Torque Driver, Handle

Product Description

STR 10783

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 10784

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 809229

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809226

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 10982

Wireless Digital Torque Wrenches: 1350 Series Digital Torque and Angle Wrench, ft-lb

Product Description

• Torque Accuracy: +/-2% of the indicated value from 20% to 100% of rated capacity, +/-4% of the indicated value from 5% to 19% of rated capacity in CW and CCW directions
• Patented "Shear Beam" transducer eliminates lever sensitivity to produce more consistently accurate torque application
• Torque and Angle functionality include these operational modes: Torque To Angle, Torque and Angle Monitoring, Residual Torque, and Prevailing Torque
• Torque and angle can identify changing joint conditions and prevent errors
• The torque-only functionality includes Track and Peak modes of operation
• The backlit display is easy to read in any light condition
• Customizable color display change to inform the operator
• Display lights upon torque application; Turns yellow at 90% of target torque; Turns green upon reaching target torque; Turns red upon reaching maximum torque
• Tool emits an acceptance tone and the handle vibrates upon reaching target torque and angle values
• Tool emits reject tone upon reaching maximum torque
• Compatible with the Global 400 and Global 400mp
• P-Sets are set and saved via the controller
• No changes can be made at the wrench level, this provides you with another level of error proofing by preventing inadvertent changes
• Can be used with the Patented Holding Tool Series

STR 809232

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809233

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809234

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809235

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809237

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809241

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809236

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809242

Flare Nut Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809294

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809290

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809291

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809293

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809292

Open End Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809302

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 810014

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810056

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810017

Adjustable Torque Screwdrivers: Adjustable Torque Screwdriver, Nm

Product Description

• Bi-directional Accuracy of +/- 6% Indicated Value from 20% to 100% of capacity
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Scale on the shaft is marked in dual incrementation (in lb and Nm) on Cal 36/4, kgfcm on CAL 40
• Magnifying lens improves the view of a clearly engraved scale
• To operate, simply dial torque setting and insert bit
• Anti-backlash design enhances repeatability
• Comes with FREE calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 810007

Preset Torque Screwdrivers: Preset Torque Screwdrivers - PM Series, in-lb

Product Description

• Bi-directional accuracy of +/- 6% preset value
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Short dwell designed to prevent repetitive motion injuries
• Preset torque using torque tester and insert a bit to use
• Can be set in any unit of torque measurement
• Long shaft for use in limited-access applications
• Uses standard 1/4" bits, adapters, and sockets
• Polished aluminum exterior
• Anti-backlash design enhances repeatability
• Can be ordered preset from factory with calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 809304

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809328

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809317

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809308

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809330

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809504

Ratcheting Square Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809306

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809507

Ratcheting Square Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809307

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809315

Hex Drive Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809917

Standard Tooling Adapter Interchangeable Head - STA - Series

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 810045

Adjustable Torque Screwdrivers: Exactorq Adjustable Torque Screwdriver, in-oz

Product Description

• Bi-directional accuracy of +/- 6% preset value
• Meets or exceeds ASME B107.300-2010 and ISO 6789
• Operator cannot over-torque, clutch releases automatically when desired torque has been achieved
• Short dwell designed to prevent repetitive motion injuries
• Preset torque using torque tester and insert a bit to use
• Can be set in any unit of torque measurement
• Long shaft for use in limited-access applications
• Uses standard 1/4" bits, adapters, and sockets
• Polished aluminum exterior
• Anti-backlash design enhances repeatability
• Can be ordered preset from factory with calibration certificate from our ISO/IEC 17025 Accredited Calibration Laboratory

STR 809305

Box Head Interchangeable Heads for Torque Wrenches

Product Description

• One piece, cast, proprietary steel selection
• All of our heads fit on all of our wrenches
• Our smallest head fits on our largest wrench
• Our largest head fits on our smallest wrench
• Fewer wrenches to buy, calibrate, repair, and manage
• No need to buy multiple wrenches and heads to cover different fastener sizes within the same torque range
• Sturtevant Richmont interchangeable heads have two common centerlines
• Typically for sizes 32 mm and below the common centerline is 365 mm
• Sizes larger than 33 mm the common centerline extends to 984 mm

STR 809352

Box Head Interchangeable Heads for Torque Wrenches

STR 810059

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810060

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810100

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810137

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810153

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810174

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810424

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810334

Click-Type Preset Torque Wrenches: LTC Preset Interchangeable Head Click-Type Torque Wrenches, in-lb

Product Description

• +/- 4% repeatability from 20% to 100% of capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• Tools preset at the factory include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Low profile of the square drive creates access where other tools cannot go
• Flattened case is sideloading resistant
• Error Proofing By Design flattened case provides superior mechanism support that makes the wrench easier to calibrate and it holds calibration much longer than other wrenches
• Excellent tactile and audible pulse when the preset torque is achieved
• Cushion grip plus lightweight for excellent ergonomics
• Fixed square drive provides exceptional strength and durability
• CART tool
• Torque is preset and locked in with a special tool
• Torque can be set using any unit of measurement
• Combination Adjusting and Release Tool (CART) P/N 819117 allows the operator to easily adjust torque on all SLTC -FM, SLTC, LTC, LTCR, and LTCS wrenches
• Can be ordered preset from the factory or you can set the torque with your own torque tester

STR 810335

Micrometer Adjustable Torque Wrenches: CCM Micrometer Adjustable Click Wrenches, ft-lb

Product Description

• Accuracy of +/-4% of Indicated Value from 20% to 100% of the rated capacity
• Meets or exceeds the requirements of ASME B107.300-2010 and ISO 6789
• SR Dovetail connects with all of our interchangeable heads
• Every one of our interchangeable heads fits on every one of our wrenches
• No need to buy multiple wrenches and heads to cover all fastener sizes within a given torque range
• Error Proofing By Guidance: Strong audible and tactile impulse when set torque value is achieved
• Knurl Grip handle is rugged and comfortable in your hand for long periods of time
• Fast adjustment: These wrenches need the fewest number of rotations to move up and down the scale
• Error Proofing By Design: Spring tension on these wrenches can be reduced without the wrench falling out of tolerance
• Includes FREE certification from our +/-.25% Indicated Value ISO/IEC 17025 Accredited Calibration Laboratory
• Open End head sizes go from 1/4" to 1 1/4" (or 5 mm to 32 mm) with our 1 7/16" (36.5 mm) common centerline
• Open End head sizes from 1 5/16" to 3 1/4" (or 34 mm to 60 mm) maintain the 3 7/8" (98.4 mm) common centerline
• All wrenches with a capacity over 150 ft. lbs. or 200 Nm are calibrated with interchangeable heads having a common centerline of 3 7/8 inches (98.4 mm)

STR 810430

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810168

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810417

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810172

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810410

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810401

Click-Type Preset Torque Wrenches: LTCR Preset Interchangeable Head Click-Type Wrench - Ratcheting Square Drive, in-lb

Product Description

• LTCR-Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the torque value for you at the factory, we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810411

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810416

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810170

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction

STR 810414

Wireless Click-Type Torque Wrenches: SLTC FM 2.4 GHZ Click Wrenches, in-lb

Product Description

• Preset click torque wrench measures and applies torque in the clockwise direction
• Using this wrench in the counter-clockwise direction will apply torque, but it will not measure torque because it does not click in the counter-clockwise direction
• Flattened case for superior accuracy, reliability, and durability
• Accuracy of +/- 4% or better of preset value from 20% to 100% of capacity meets or exceeds requirements of ASME B107.300-2010 and ISO 6789
• Excellent audible/tactile impulse when preset torque is achieved
• Error Proofing By Guidance: Monitors time in the clicked position to proved OK/BAD quality attribute data with every use of the tool
• Error Proofing By Behavior Modification in action. The new A3 has a new battery that lasts longer and is easier to change
• Raised LED Fresnel to improve visibility when working in less than optimal positions
• AAA batteries are more readily available than are the 6-volt batteries

STR 810171

Click-Type Preset Torque Wrenches: LTCS Preset Interchangeable Head Click-Type Torque Wrenches - Fixed Square Drive, in-lb

Product Description

• LTCS Series torque wrenches have +/- 4% Indicated Value Accuracy from 20% to 100% of capacity, meeting or exceeding the requirements of ASME B107.300-2010 and ISO 6789
• When we preset the tool to your requested torque value we include a free Certificate of Calibration from our ISO 17025 Accredited Lab
• The low profile of the square drive creates access where other tools cannot go, which is important with our larger square drives
• Flattened case prevents side loading and provides support for the click mechanisms so the wrench is easier to calibrate and it hold calibration longer
• Cushioned comfort grip is lightweight and provides excellent ergonomics
• Slide pin ratchet provides strength and durability
• Easy to install ratchet renewal kit is available
• The torque is preset and locked in with a special tool
• Combination Adjusting and Release Tool (CART P/N 819177) allows the operator to easily adjust torque on all SLTC, LTC, LTCR and LTCS wrenches
• Torque can be set using any unit of measurement
• Can be ordered preset from the factory or you can set the torque with your own torque tester
• Wrench measures torque in the clockwise direction