Airpower | GRACO INC. S10595 branded products

Kit, Handle Assy, Pressure

GG 289016

Kit, Handle Assy, Pressure

$314.00

Airpro Gun, Assembly, HVLP, Gravity w/Cup

GG 289014

AIRPRO GUN, ASSY, HVLP, GRAVITY W/CUP

Graco 289014 AirPro Air Spray Gravity Feed Gun, HVLP, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Comp, Gravity w/Cup

GG 289017

AIRPRO GUN, ASSY, COMP, GRAVITY W/CUP

Graco 289017 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Comp, .070

GG 289009

AIRPRO GUN, COMP, .070

Graco 289009 AirPro Air Spray Gravity Feed Gun, Compliant, 0.070 inch (1.8 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Conv, Gravity, Pps, .070

GG 289021

AIRPRO GUN, ASSY, CONV, GRAV, PPS, .070

Graco 289021 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, 3M PPS Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, HVLP, .070

GG 289006

AIRPRO GUN, HVLP, .070

Graco 289006 AirPro Air Spray Gravity Feed Gun, HVLP, 0.070 inch (1.8 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Siphon, Conv.055

GG 289028

AIRPRO GUN, SIPHON, CONV.055

Graco 289028 AirPro Air Spray Siphon Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Siphon Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$654.00

Airpro Gun, Comp, .055

GG 289008

AIRPRO GUN, COMP, .055

Graco 289008 AirPro Air Spray Gravity Feed Gun, Compliant, 0.055 inch (1.4 mm) Nozzle, without Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Conv, Gravity w/Cup

GG 289012

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

Graco 289012 AirPro Air Spray Gravity Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Automotive, HVLP, .047

GG 289035

AIRPRO GUN, AUTOMOTIVE, HVLP, .047

Graco 289035 AirPro Air Spray Pressure Feed Gun, HVLP, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Automotive
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Siphon, Conv, .070

GG 289029

AIRPRO GUN, SIPHON, CONV, .070

Graco 289029 AirPro Air Spray Siphon Feed Gun, Conventional, 0.070 inch (1.8 mm) Nozzle, Metal Siphon Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Siphon Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.070
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$639.00

Airpro Gun, Automotive, Compliant, .047

GG 289037

AIRPRO GUN, AUTOMOTIVE, COMPLIANT, .047

Graco 289037 AirPro Air Spray Pressure Feed Gun, Compliant, 0.047 inch (1.2 mm) Nozzle, for Automotive Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Automotive
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solvent borne, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Airpro Gun, Assembly, Conv, Gravity w/Cup

GG 289011

AIRPRO GUN, ASSY, CONV, GRAVITY W/CUP

Graco 289011 AirPro Air Spray Gravity Feed Gun, Conventional, 0.055 inch (1.4 mm) Nozzle, Plastic Gravity Cup

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Specialty
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 590
Gun Weight (kg): 0.59
Gun Weight (lb): 1.3
Gun Weight (oz): 20.8

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Kit, Air Cap, Gen Metal, Conv

GG 289040

Kit, Air Cap, Gen Metal, Conv

$168.00

Kit, Air Cap, Gen Metal, Comp

GG 289042

KIT,AIR CAP,GEN METAL,COMP

Graco 289042 Air Cap Kit for AirPro Compliant Guns with 0.020-0.070 inch (0.5-1.8 mm) Nozzle, General Metal

$147.00

Kit, Air Cap, Gen Metal, HVLP

Nozzle Kit for AirPro Conventional Guns with 0.086 inch (2.2 mm) Nozzle, High Wear

$267.00

Kit, Accessory, Aircap, Lacquer

GG 289080

KIT, ACCY,AIRCAP,LACQUER

Graco 289080 Air Cap Lacquer Kit, includes air cap optimized to spray lacquer

$153.00

Airpro Gun, Stain, Compliant, .040

GG 289111

AIRPRO GUN, STAIN, COMPLIANT, .040

Graco 289111 AirPro Air Spray Pressure Feed Gun, Compliant, 0.040 inch (1.0 mm) Nozzle, for Wood Applications

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you're a custom shop or a high volume manufacturing facility.

Even material distribution through the spray pattern for optimum coverage
Improved transfer efficiency through reduced air consumption
Enhanced atomization through material-specific aircaps
Ultra-light trigger pull reduces operator muscle stress
Ergonomic gun handle provides a comfortable grip
Rounded control knobs for operator comfort
Optimize spray performance with our cutting edge aircap and nozzle design
Choose from a wide range of gun models to meet the needs of your specific application

Model: AirPro

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Application: Wood
Applicator Type: Manual

Bleed Type: Non-Bleeder

Compatible Material: NGR, Solvent borne, Stains, Toner, UV Coating, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.10
Fluid Orifice Size (in): 0.040
Fluid Orifice Size (mm): 1.0

Gun Activation: Manual
Gun Included: 1
Gun Type: Compliant Gun
Gun Weight (g): 410

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 21
Maximum Fluid Pressure (kPa): 2100
Maximum Fluid Pressure (MPa): 2.1
Maximum Fluid Pressure (psi): 300
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$0.00

Kit, Nozzle, Stain, .040

GG 289112

Kit, Nozzle, Stain, .040

$110.50

Kit, Air Inlet Valve Assy

GG 289142

KIT,AIR INLET VALVE ASSY

Graco 289142 Sharpe Air Inlet Valve Assembly for AirPro Gravity Feed Spray Gun

$64.75

Kit, Repair, Trigger (Single)

GG 289143-S

Kit, Repair, Trigger (Single)

$21.00

Kit Oring

GG 289189

Kit Oring

$15.90

Kit, Upgrde, Hd, Ptfe Diaphragm, 2150

GG 289226

Kit, Upgrde, Hd, Ptfe Diaphragm, 2150

$2,380.00

Regulator, Heated Fluid

GG 289208

REGULATOR, HEATED FLUID

$0.00

Finex Gun, Graco, 2, HVLP, 1.4

GG 289239

FINEX GUN, GRACO, 2, HVLP, 1.4

Graco 289239 Finex Air Spray Gravity Feed Gun, HVLP, 0.055 in (1.4 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Standard Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$246.50

Finex Gun, Graco, 2, HVLP, 1.8

GG 289241

FINEX GUN, GRACO, 2, HVLP, 1.8

Graco 289241 Finex Air Spray Gravity Feed Gun, HVLP, 0.071 in (1.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Standard Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.071
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (g): 540
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2
Gun Weight (oz): 19.05

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Maximum Fluid Working Pressure (bar): 6.9
Maximum Fluid Working Pressure (MPa): 0.69
Maximum Fluid Working Pressure (psi): 100

Product Type: Spray Gun

$246.50

Kit, Retaining Ring

GG 289079

KIT,RETAINING RING

Graco 289079 Retaining Ring Kit

$42.10

Finex Gun, Graco, 2, Conv, 1.4

GG 289244

FINEX GUN, GRACO, 2, CONV, 1.4

Graco 289244 Finex Air Spray Gravity Feed Gun, conventional, 0.055 in (1.4 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Standard Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 540
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2
Gun Weight (oz): 19.05

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Maximum Fluid Working Pressure (bar): 6.9
Maximum Fluid Working Pressure (MPa): 0.69
Maximum Fluid Working Pressure (psi): 100

Product Type: Spray Gun

$200.50

Finex Gun, Graco, 2, Conv., 1.5

GG 289245

FINEX GUN, GRACO, 2, CONV., 1.5

Graco 289245 Finex Air Spray Gravity Feed Gun, conventional, 0.059 in (1.5 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Standard Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.15
Fluid Orifice Size (in): 0.059
Fluid Orifice Size (mm): 1.5

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$232.00

Finex Gun, Graco, 2, HVLP, 1.5

GG 289240

FINEX GUN, GRACO, 2, HVLP, 1.5

Graco 289240 Finex Air Spray Gravity Feed Gun, HVLP, 0.059 in (1.5 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Standard Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.15
Fluid Orifice Size (in): 0.059
Fluid Orifice Size (mm): 1.5

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$286.00

Finex Gun, Graco, 2, Conv., 1.8

GG 289246

FINEX GUN, GRACO, 2, CONV., 1.8

Graco 289246 Finex Air Spray Gravity Feed Gun, conventional, 0.071 in (1.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Standard Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.071
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 540
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2
Gun Weight (oz): 19.05

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Maximum Fluid Working Pressure (bar): 6.9
Maximum Fluid Working Pressure (MPa): 0.69
Maximum Fluid Working Pressure (psi): 100

Product Type: Spray Gun

$200.00

Finex Gun, Graco, 2, Conv., 1.3

GG 289243

FINEX GUN, GRACO, 2, CONV., 1.3

Graco 289243 Finex Air Spray Gravity Feed Gun, conventional, 0.051 in (1.3 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Standard Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.13
Fluid Orifice Size (in): 0.051
Fluid Orifice Size (mm): 1.3

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (kg): 0.54
Gun Weight (lb): 1.2

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$232.00

Finex Gun, 2, HVLP, Press, 1.2

GG 289248

FINEX GUN, 2, HVLP, PRESS, 1.2

Graco 289248 Finex Air Spray Pressure Feed Gun, HVLP, 0.047 in (1.2 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.37
Gun Weight (lb): 0.8

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$369.00

Finex Gun, 2, HVLP, Press, 1.0

GG 289247

FINEX GUN, 2, HVLP, PRESS, 1.0

Graco 289247 Finex Air Spray Pressure Feed Gun, HVLP, 0.039 in (1.0 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.10
Fluid Orifice Size (in): 0.039
Fluid Orifice Size (mm): 1.0

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.37
Gun Weight (lb): 0.8

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$369.00

Kit, Fluid Control Valve

GG 289097

KIT,FLUID CONTROL VALVE

Graco 289097 Fluid Control Valve for AirPro Siphon Feed Airspray Gun

$31.50

Finex Gun, 2, HVLP, Press, 1.8

GG 289250

FINEX GUN, 2, HVLP, PRESS, 1.8

Graco 289250 Finex Air Spray Pressure Feed Gun, HVLP, 0.071 in (1.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.071
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.37
Gun Weight (lb): 0.8

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$318.00

Finex Gun, 2, Conv, Press, 1.2

GG 289253

FINEX GUN, 2, CONV, PRESS, 1.2

Graco 289253 Finex Air Spray Pressure Feed Gun, conventional, 0.047 in (1.2 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (kg): 0.37
Gun Weight (lb): 0.8

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$274.00

Finex Gun, 2, Conv, Press, 1.0

GG 289252

FINEX GUN, 2, CONV, PRESS, 1.0

Graco 289252 Finex Air Spray Pressure Feed Gun, conventional, 0.039 in (1.0 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.10
Fluid Orifice Size (in): 0.039
Fluid Orifice Size (mm): 1.0

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (kg): 0.37
Gun Weight (lb): 0.8

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$274.00

Finex Gun, 2, Conv, Press, 1.8

GG 289255

FINEX GUN, 2, CONV, PRESS, 1.8

Graco 289255 Finex Air Spray Pressure Feed Gun, conventional, 0.071 in (1.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.18
Fluid Orifice Size (in): 0.071
Fluid Orifice Size (mm): 1.8

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 370
Gun Weight (kg): 0.37
Gun Weight (lb): 0.8
Gun Weight (oz): 13.05

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Maximum Fluid Working Pressure (bar): 6.9
Maximum Fluid Working Pressure (MPa): 0.69
Maximum Fluid Working Pressure (psi): 100

Product Type: Spray Gun

$267.50

Finex Gun, 2, Conv, Press, 1.4

GG 289254

FINEX GUN, 2, CONV, PRESS, 1.4

Graco 289254 Finex Air Spray Pressure Feed Gun, conventional, 0.055 in (1.4 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Pressure Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: Conventional Gun
Gun Weight (g): 370
Gun Weight (kg): 0.37
Gun Weight (lb): 0.8
Gun Weight (oz): 13.05

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Maximum Fluid Working Pressure (bar): 6.9
Maximum Fluid Working Pressure (MPa): 0.69
Maximum Fluid Working Pressure (psi): 100

Product Type: Spray Gun

$236.50

Kit, Trigger

GG 289140

Kit, Trigger

$32.30

Kit, Repair, Trigger (FIVE PIECES/UNIT)

GG 289143

KIT,REPAIR,TRIGGER

Graco 289143 Sharpe Trigger Repair Kit for AirPro Gravity Feed Spray Gun

$108.00

Kit, Tip, .020

GG 289350

Kit, Tip, .020

$55.25

Kit, Needle, Nozzle, Air Cap, 1.8

GG 289309

Kit, Needle, Nozzle, Air Cap, 1.8

$237.50

Kit, Needle, Nozzle, Air Cap, 1.4

GG 289298

Kit, Needle, Nozzle, Air Cap, 1.4

$119.00

Kit, Needle, Nozzle, Air Cap, 1.0

GG 289296

Kit, Needle, Nozzle, Air Cap, 1.0

$119.00

Needle Assembly Kit for AirPro Guns with 0.086 inch (2.2 mm) Nozzle, High Wear

GG 289351

Needle Assembly Kit for AirPro Guns with 0.086 inch (2.2 mm) Nozzle, High Wear

$188.50

Kit, Needle And Nozzle, .030

GG 289459

Kit, Needle And Nozzle, .030

$133.50

Kit, Needle, Nozzle, Air Cap, 1.2

GG 289302

Kit, Needle, Nozzle, Air Cap, 1.2

$307.00

Kit, Needle And Nozzle, .042

GG 289460

KIT,NEEDLE AND NOZZLE,.042

Graco 289460 Needle/Nozzle Kit for AirPro Guns with 0.042 inch (1.1 mm) Nozzle

$133.50

Kit, Needle, Nozzle, Air Cap, 1.8

GG 289300

Kit, Needle, Nozzle, Air Cap, 1.8

$119.00

Finex Gun, 2, Mini, HVLP, .6

GG 289256

FINEX GUN, 2, MINI, HVLP, .6

Graco 289256 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.024 in (0.6 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Mini Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.06
Fluid Orifice Size (in): 0.024
Fluid Orifice Size (mm): 0.6

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.4
Gun Weight (lb): 0.9

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$252.00

Finex Gun, 2, Mini, HVLP, 1.2

GG 289259

FINEX GUN, 2, MINI, HVLP, 1.2

Graco 289259 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.047 in (1.2 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Mini Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.12
Fluid Orifice Size (in): 0.047
Fluid Orifice Size (mm): 1.2

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.4
Gun Weight (lb): 0.9

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$247.00

Finex Gun, 2, Mini, HVLP, .8

GG 289257

FINEX GUN, 2, MINI, HVLP, .8

Graco 289257 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.031 in (0.8 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Mini Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.08
Fluid Orifice Size (in): 0.031
Fluid Orifice Size (mm): 0.8

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.4
Gun Weight (lb): 0.9

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$252.00

Kit, Needle

GG 289271

Kit, Needle

$39.90

Finex Gun, 2, Mini, HVLP, 1.0

GG 289258

FINEX GUN, 2, MINI, HVLP, 1.0

Graco 289258 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.039 in (1.0 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Mini Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.10
Fluid Orifice Size (in): 0.039
Fluid Orifice Size (mm): 1.0

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.4
Gun Weight (lb): 0.9

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$217.50

Kit, Needle And Nozzle, .020

GG 289458

Kit, Needle And Nozzle, .020

$133.50

Kit, Air Valve Repair

GG 289408

Kit, Air Valve Repair

$77.75

Kit, 125 Cc Plastic Gravity Cup

GG 289323

Kit, 125 Cc Plastic Gravity Cup

$33.40

Kit, Gun Repair

GG 289399

KIT,GUN REPAIR

Graco 289399 Repair Kit- AirPro Pressure Feed Air Spray Gun

Compatible Material: Sealants, Adhesives

$71.50

Finex Gun, 2, Mini, HVLP, 1.4

GG 289260

FINEX GUN, 2, MINI, HVLP, 1.4

Graco 289260 Finex Air Spray Gravity Feed Gun, mini, HVLP, 0.055 in (1.4 mm) needle/ nozzle size

Well-balanced and lightweight, the Finex gun design offers a more affordable way to spray. Available in either pressure feed or gravity feed guns options and HVLP or conventional technologies.

Aircaps optimized for high quality spray performance
Lightweight, ergonomic gun
Lightest trigger pull in its category

Model: Finex

Air Inlet Size (cm): 0.635
Air Inlet Size (in): 1/4
Air Inlet Size (mm): 6.35
Air Inlet Thread Type: NPSM

Applicator Type: Manual

Bleed Type: Non-Bleeder
Body Material: Metal

Compatible Material: Epoxies, High Solids, Latex, Plural Component Materials, Sealants, Solvent borne, Urethane, Waterborne

Feed Type: Mini Gravity Feed

Fluid Inlet Size (cm): 0.9525
Fluid Inlet Size (in): 3/8
Fluid Inlet Size (mm): 9.525
Fluid Inlet Thread Type: NPSM
Fluid Orifice Size (cm): 0.14
Fluid Orifice Size (in): 0.055
Fluid Orifice Size (mm): 1.4

Gun Activation: Manual
Gun Included: 1
Gun Type: HVLP Gun
Gun Weight (kg): 0.4
Gun Weight (lb): 0.9

Includes: Air Cap, Needle Assembly, Nozzle, Tool Kit, Cup

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (MPa): 0.7
Maximum Air Inlet Pressure (psi): 100
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100
Maximum Fluid Temperature ( degree C): 43
Maximum Fluid Temperature ( degree F): 109

Product Type: Spray Gun

$217.50

Kit, Needle, Nozzle, Air Cap, 1.4

GG 289308

Kit, Needle, Nozzle, Air Cap, 1.4

$237.50

Kit, Needle, Nozzle, Air Cap, 1.2

GG 289307

Kit, Needle, Nozzle, Air Cap, 1.2

$237.50

Kit 600Cc Plastic Cup

GG 289322

Kit 600Cc Plastic Cup

$39.00

Kit, Needle, Nozzle, Air Cap, 1.3

GG 289292

Kit, Needle, Nozzle, Air Cap, 1.3

$119.00

Kit, Repair, Epdm, 8900 Valve

GG 289401

Kit, Repair, Epdm, 8900 Valve

$0.00

Kit, Needle And Nozzle, .055

GG 289462

KIT,NEEDLE AND NOZZLE,.055

Graco 289462 0.055 in. Needle/Nozzle Kit- for General Metal Spray Guns

$125.50

Kit, Needle And Nozzle, .042 Sst

GG 289461

Kit, Needle And Nozzle, .042 Sst

$199.00

Kit, Needle And Nozzle, .086

GG 289466

Kit, Needle And Nozzle, .086

$133.50

Kit, Needle And Nozzle, .070

GG 289464

KIT,NEEDLE AND NOZZLE,.070

KIT, AIR VALVE, REPAIR

Graco 289407 Air Valve Repair Kit

$71.50

GUN, SPRAY, TEXTURE

GG 289605

GUN, SPRAY, TEXTURE

$833.00

Kit, Needle Packing

GG 289455

KIT,NEEDLE PACKING

Graco 289455 Needle Packing Repair Kit

$73.75

Kit, Needle And Nozzle, .055 Sst

GG 289463

KIT,NEEDLE AND NOZZLE,.055 SST

Graco 289463 Needle/ Nozzle Kit for AirPro Guns with 0.055 inch (1.4 mm) Nozzle, General Metal with Stainless Steel Tip

$188.50

Triton SST Package, Wall, Air and Fluid Hoses, Airpro Compliant Gun .055 Nozzle, 100 PSI Reg

GG 289623

TRITON SPRAYER, SS PUMP WALL MNT, COMP

Graco 289623 Triton SST Spray Package, Wall, 100 psi Regulator, Air & Fluid Hoses, AirPro Compliant Gun .055 in (1.4 mm) Nozzle, Waterborne Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

Superior finish quality for conventional, HVLP and compliant or electrostatic applications
Supplies up to 35% extra air flow to gun for superior atomization
Saves material and time during flushing, priming and color changes
Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

Model: Triton
Series: 308

Application: Waterborne

Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers, Waterborne

Fluid Inlet Size (cm): 1.905
Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Type: NPT

Gun Included: 1
Gun Model: AirPro
Gun Technology: Compliant
Gun Type: Air Spray

Includes: 25 ft Air Hose, 25 ft Fluid Hose, Regulator, Applicator

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100

Maximum Flow Rate (GPM): 8.5
Maximum Flow Rate (L/min): 32

Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (psi): 100

Mount Location: Wall Mount
Mount Type: Wall Mount

Power Source: Air

Pressure Type: Low Pressure
Product Type: Spray Package

Pump Ratio: 1:1
Pump Type: Pneumatic Diaphragm Pump

$0.00

Sprayer Wall Mount

GG 289630

TRITON SPRAYER, AL WALL MNT CONV STAIN

Graco 289630 Triton Alum Spray Package, Wall, Air & Fluid Hoses, AirPro Conventional Gun .040 in (1.0 mm) Nozzle for Wood Applications

Air-operated diaphragm spray package designed for the finishing market. It is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

Superior finish quality for conventional, HVLP and compliant or electrostatic applications
Supplies up to 35% extra air flow to gun for superior atomization
Saves material and time during flushing, priming and color changes
Rugged, stainless steel or aluminum construction pump handles a wide variety of fluids

Model: Triton
Series: 308

Application: Wood

Compatible Material: CARC, Enamel, Epoxies, High Solids, Latex, Lacquer, Metallics, Stains, Single Components, Solvent borne Paints, Solvent borne, Varnish Primers

Fluid Inlet Size (cm): 1.905
Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 0.9525
Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 9.525
Fluid Outlet Thread Type: NPT

Gun Included: 1
Gun Model: AirPro
Gun Technology: Conventional
Gun Type: Air Spray

Includes: 25 ft Air Hose, 25 ft Fluid Hose, Applicator

Maximum Air Inlet Pressure (bar): 7
Maximum Air Inlet Pressure (kPa): 700
Maximum Air Inlet Pressure (psi): 100

Maximum Flow Rate (GPM): 8.5
Maximum Flow Rate (L/min): 32

Maximum Working Pressure (bar): 7
Maximum Working Pressure (kPa): 700
Maximum Working Pressure (psi): 100

Mount Location: Wall Mount
Mount Type: Wall Mount

Power Source: Air

Pressure Type: Low Pressure
Product Type: Spray Package

Pump Ratio: 1:1
Pump Type: Pneumatic Diaphragm Pump

$3,140.00

Heater, Cartridge, 500W, 230V

GG 116010

Heater, Cartridge, 500W, 230V

$1,695.00

Gl-1 Injector, One Point

GG 114901

GL-1 INJECTOR, ONE POINT

Graco 114901 GL-1 Grease Injector - 1 Injector and Manifold

Custom fit your system with Gracos adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.

Application: High volume output at high pressures for the most demanding applications

The GL-1 injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
Includes an adjustable hex head nut to make adjusting the output simple
No vent holes and fully enclosed press fittings to prevent leaking lubricant
Rugged, single piece uni-body design built for the harshest environments

Model: GL-1
Adjustable: Adjustable

Application: In-Plant Machinery, Off-Road Equipment

Compatible Material: Grease
Compatible Metering Device: Single Line Parallel

Cycle Indicator: Visual

Dispense Outlet Size (cm): 0.33
Dispense Outlet Size (in): 0.13
Dispense Outlet Size (mm): 3.3
Dispense Outlet Thread Type: NPT

For Use With: Single Line Parallel Automatic Lubrication Systems

Inlet Size (cm): 0.9525
Inlet Size (in): 3/8
Inlet Size (mm): 9.525

Inlet Thread Type: NPT

Maximum NLGI Grade: #2

Maximum Operating Pressure (psi): 3500

Maximum Output Volume (in cu): 0.08

Maximum Reset Pressure (psi): 600

Maximum Working Pressure (bar): 241
Maximum Working Pressure (kPa): 24100
Maximum Working Pressure (MPa): 24.1
Maximum Working Pressure (psi): 3500

Minimum Operating Pressure (psi): 1850
Minimum Output Volume (in cu): 0.008

Outlet Size (cm): 0.9525
Outlet Size (in): 3/8
Outlet Size (mm): 9.525
Outlet Thread Type: NPT

$219.00