Impacts
1/2" IMPACTOOL, 36QMAX
IR 36QMAX
IR 36QMAX
1/2" Ultra Compact Air Impact Wrench, Quiet, 640 ft-lb Torque, Friction Ring Retainer, Pistol
This tool has been rigorously tested, beaten up, dropped and pushed to the limits to make sure it lasts twice as long as the competition. With the twin hammer design, unmatched durability, superior accessibility and up to 640 ft-lbs* of nut busting torque at just 2.4 lbs, the 36QMAX is not just the tool you want, it is the tool you need to get REAL WORK done time and time again.Features And Benefits
- Power-to-Weight: At 2.4 lbs, this tool is amongst the lightest on the market, and still delivers 640 ft-lbs of nut busting torque; delivering the power you expect from an Ingersoll Rand impact.
- Access: There is no place for work to hide. The compact design provides a user the access and power they need, even if the task is up, under, over, or around any awaiting obstruction.
- Reliability: Built on the IR Impact Wrench legacy, this tool is tested at 2X the life of competitive products available today.
- Quiet: The sound baffling technology provides a quiet design at only 91.3 dB(A).
- Control: The one-handed forward/reverse push button and 3-mode power regulator give you max control and max performance.
Includes: Bare Tool
Product Application and Uses: Vehicle Maintence And Industrial Mro For Resctricted Areas
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 19
Air Consumption @ Load (l/min): 538
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 24
Average Air Consumption (l/min): 680
Blows per Min: 1300
Color: Grey
Configuration/Handle Type: Pistol Grip
Drive Size (in): 1/2
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Aluminum with Hard-coating
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 87.6 / 98.6
Hammer Case: Aluminum
Handle Material: Composite
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 91.3 / 102.3
Max Bolt Diameter (in): 9/16
Max Free Speed (rpm): 8000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 472
Max Torque (in-lb): 5664
Max Torque (nm): 640
Min Hose Size (in): 3/8
Motor: Reverse Bias
Number of Power Settings: 3
Nut-busting/Breakaway Torque (ft-lb): 640
Nut-busting/Breakaway Torque (in-lb): 7682
Nut-busting/Breakaway Torque (nm): 868
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 180.77
Product Length (in): 4.61
Product Width (in): 2.36
Product Height (in): 7.13
Product Weight (lb): 2.6
Quiet Tool: Yes
Recommended Forward Torque Range (ft-lb): 384
Recommended Forward Torque Range (in-lb): 4602
Recommended Forward Torque Range (nm): 520
Retainer Type: Friction Ring
Side to Center Distance (in): 1.2
Side to Center Distance (mm): 30
Special Features: Quiet, Ultra compact
Speed Setting: Variable Speed
Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
Tool Type: Compact
Vanes: 7
Vibration Level (m/s2): 8.1
Warranty: 2-year
Similar IR
- 15QMAX
$212.80
THROTTLE VALVE PLUNGER
IR 3940-302
IR 3940-302
Throttle Valve Plunger Service Part for Ingersoll Rand Power Tools
$44.00
IMPACTOOL
IR 3940B2TI
IR 3940B2TI
1" Air Impact Wrench, Super Duty, 2750 ft-lb Torque, Titanium Hammercase, Thru-hole Retainer, D-Handle Inside Trigger
With a titanium hammer case, bronze end plates and torque up to 2750 ft-lbs, the 3900 Series are the premier industrial grade impacts in the industry.Features And Benefits
- Power: High torque output of 2750 ft-lbs and 800 blows per minute.
- Bronze End Plates: Thanks to the bronze end-plate and a corrosion preventative treatment, this tool is corrosion and wear resistant, which makes it great for outdoor conditions.
- Durability: With a titanium hammer case and metal housing, this tool can withstand even the harshest conditions.
- Balance: Twin hammer mechanism ensure consistent power and balance.
- Reverse bias motor to help remove the most stubborn bolts.
- Pressure-fed mechanism lubrication ensures complete coverage throughout the tool
- Integral muffler
- Optimized for general industrial use, MRO, rail, heavy machinery, and shipbuilding
Product Application and Uses: Heavy Industry, Oil&Gas, Foundry
Actuation/Throttle Type/Switch Type: Inside Trigger
Air Inlet: 1/2" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Average Air Consumption (cfm): 64
Average Air Consumption (l/min): 1812
Blows per Min: 800
Color: Grey
Configuration/Handle Type: D-Handle
Drive Size (in): 1
Drive Type: Square
Duty Rating: Super Duty
End Plates: Bronze
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 103.4 / 114.4
Hammer Case: Titanium
Housing Material: Aluminum
Impact Mechanism: Twin Hammer
Impacting Sound Pressure/Power Db(A): 100.6 / 111.6
Max Bolt Diameter (in): 1-3/8
Max Free Speed (rpm): 6000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 2750
Max Torque (in-lb): 33004
Max Torque (nm): 3729
Min Hose Size (in): 3/4
Motor: Reverse Bias
Number of Power Settings: Continuous
Power Source: Air Powered
Power to Weight Ratio (Nut-busting Torque/Weight) (ft-lb/lb): 117.9
Product Length (in): 13.5
Product Weight (lb): 21.2
Quiet Tool: No
Recommended Forward Torque Range (ft-lb): 500-1800
Recommended Forward Torque Range (in-lb): 6001-21596
Recommended Forward Torque Range (nm): 678-2440
Retainer Type: Thru-hole
Special Features: Titanium hammercase
Standards/Certifications: Iso 11148-6, Cagi B186, Iso 28927-2, Iso 15744
Tool Type: Full-size
Vanes: 7
Vibration Level (m/s2): 13.1
Vibration Uncertainy K* (m/s2): 1.6
Warranty: 1-year
Similar IR
- 3940A2TI
$4,301.00
Air Cat 1/4 Mini Palm Ratchet
FP AC-807-25
FP AC-807-25
Air Cat 1/4 Mini Palm Ratchet
Call for pricing
Impact 3/8in Pistol Pin Anv
MPT MP-212-PT
MPT MP-212-PT
Impact 3/8in Pistol Pin Anv
Call for pricing
3/8" ANGLE IMPACT
IR 2015MAX
IR 2015MAX
3/8" Air Impact Wrench, 180 ft-lb Torque, Friction Ring Retainer, Right Angle
This revolutionary product is unlike any other on the market today. The Hammerhead Low Profile impact wrench offers the power and speed of an impact with the reach of a ratchet. The combination of MAX power, MAX control, and MAX access now allows you to use an Ingersoll Rand impact wrench for virtually any application. Say goodbye to awkward extensions and swivel sockets, and watch your productivity soar as you conquer tasks in minutes that once took you hours.Features And Benefits
- Max Power: With 180 ft-lbs of max torque and 9000 rpm, this tool offers more than twice the power of the leading competitor's ratchet.
- Max Control: A feather-touch trigger, two-position forward power regulator and conveniently located forward / reverse ring provide precise control.
- Max Access: A head height of under 2" and reactionless torque allow you to safely use this powerful tool in tight spaces.
- Feather touch trigger, 2-position forward power regulator, forward/reverse ring
- Compact design, with head height under 2 inches, makes operation and access easier in tight spots so you can perform even the most detailed work with this air impact wrench.
- Ergonomically sound rear exhaust system.
- Offers the same reach as a ratchet.
- Optimized for the vehicle repair industry, body shops, and MRO.
- 1-year warranty.
Product Application and Uses: Designed to remove and install threaded fasteners. Optimized for the vehicle repair industry, body shops, and MRO
Actuation/Throttle Type/Switch Type: Trigger
Air Consumption @ Load (cfm): 19
Air Consumption @ Load (l/min): 538
Air Inlet: 1/4" NPT
Air Pressure (psi): 90
Anvil Length: Standard
Blows per Min: 2100
Color: Grey
Configuration/Handle Type: Right Angle
Drive Size (in): 3/8
Drive Type: Square
Duty Rating: Maintenance Duty
End Plates: Aluminum with Hard-coating
Exhaust Location: Bottom
Free Speed Sound Pressure/Power Db(A): 94.1 / 105.1
Hammer Case: Aluminum
Handle Material: Composite
Housing Material: Impact and chemical-resistant composite housing and patented steel reinforced frame
Impact Mechanism: Single Hammer
Impacting Sound Pressure/Power Db(A): 96.6 / 107.6
Max Bolt Diameter (in): 0.4375
Max Free Speed (rpm): 9000
Max Pressure (bar): 6.2
Max Torque (ft-lb): 180
Max Torque (in-lb): 2160
Max Torque (nm): 244
Min Hose Size (in): 3/8
Motor: Reverse Bias
Number of Power Settings: 2
Power Source: Air Powered
Product Length (in): 13.1
Product Width (in): 2.2
Product Height (in): 3.1
Product Weight (lb): 3.4
Recommended Forward Torque Range (ft-lb): 45-140
Recommended Forward Torque Range (in-lb): 540-1682
Recommended Forward Torque Range (nm): 61-190
Recommended Reverse Torque (ft-lb): 45-160
Recommended Reverse Torque (nm): 61-217
Retainer Type: Friction Ring
Side to Center Distance (in): 1.1
Side to Center Distance (mm): 28
Speed Setting: Variable Speed
Standards/Certifications: CE
Tool Type: Full-size
Vanes: 6
Vibration Level (m/s2): 17.4
Warranty: 2-year
Similar IR
- 2025MAX
$425.60
KIT, BUTTON
IR 2115-K75RD
IR 2115-K75RD
Button Kit for Ingersoll Rand 2115 and 2125 Series Impact Wrench
For Use With- 2115QTIMAX
- 2115PTIMAX
- 2125PTIMAX
- 2125QTIMAX
$15.00