GRACO INC. S10595
Fitting, Pipe Nipple, Hex, 1/8 x 1/8 NPT
GG GC2196
Fitting, Pipe Nipple, Hex, 1/8 x 1/8 NPT
Gun, Probler P2
GG GCP2R0
P2 GUN
Graco GCP2R0 Probler P2 Gun Assembly with 00 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Model: P2
- Series: Standard
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.074
- Fluid Orifice Size (in): 0.029
- Fluid Orifice Size (mm): 0.74
- For Use With: Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment
- Gun Activation: Manual
- Gun Included: 1
- Gun Series: Standard
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 241
- Maximum Fluid Working Pressure (MPa): 24.1
- Maximum Fluid Working Pressure (psi): 3500
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 00 (.029)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
Probe P2 Gun - 01 Tip
GG GCP2R1
P2 GUN
Graco GCP2R1 Probler P2 Gun Assembly with 01 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Model: P2
- Series: Standard
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Applicator Type: Manual
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.107
- Fluid Orifice Size (in): 0.042
- Fluid Orifice Size (mm): 1.07
- For Use With: Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment
- Gun Activation: Manual
- Gun Included: 1
- Gun Series: Standard
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 241
- Maximum Fluid Working Pressure (MPa): 24.1
- Maximum Fluid Working Pressure (psi): 3500
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 01 (.042)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
Gun, P2
GG GCP2R3
P2 GUN
Graco GCP2R3 Probler P2 Gun Assembly with 03 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Model: P2
- Series: Standard
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.152
- Fluid Orifice Size (in): 0.060
- Fluid Orifice Size (mm): 1.52
- Gun Activation: Manual
- Gun Series: Standard
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 03 (.060)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
- Overall Length (cm): 7.9
- Overall Length (in): 3.125
- Overall Length (mm): 79
- Overall Width (cm): 17.4
- Overall Width (in): 6.875
Gun, Probler P2
GG GCP2RA
P2 GUN
Graco GCP2RA Probler P2 Gun Assembly with AA Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Model: P2
- Series: Standard
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.091
- Fluid Orifice Size (in): 0.036
- Fluid Orifice Size (mm): 0.91
- Gun Activation: Manual
- Gun Series: Standard
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: AA (0.036)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
- Overall Length (cm): 7.9
- Overall Length (in): 3.125
- Overall Length (mm): 79
- Overall Width (cm): 17.4
- Overall Width (in): 6.875 <
Gun, Probler Elite 00P2
GG GCP3R0
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3R0 Probler P2 Elite Gun Assembly with 00 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.074
- Fluid Orifice Size (in): 0.029
- Fluid Orifice Size (mm): 0.74
- Gun Activation: Manual
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 00 (.029)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
- Overall Length (cm): 7.9
- Over
Gun Assy, Probler P2 Elite
GG GCP3R1
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3R1 Probler P2 Elite Gun Assembly with 01 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Applicator Type: Manual
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.107
- Fluid Orifice Size (in): 0.042
- Fluid Orifice Size (mm): 1.07
- For Use With: Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment
- Gun Activation: Manual
- Gun Included: 1
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 220
- Maximum Fluid Working Pressure (MPa): 22
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 01
GUN, ASSY, GUN, PROBLER P2 ELITE
GG GCP3R2
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3R2 Probler P2 Elite Gun Assembly with 02 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.132
- Fluid Orifice Size (in): 0.052
- Fluid Orifice Size (mm): 1.32
- Gun Activation: Manual
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 02 (.052)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
- Overall Length (cm): 7.9
- Over
Gun Assy, Probler P2 Elite
GG GCP3R3
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3R3 Probler P2 Elite Gun Assembly with 03 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.152
- Fluid Orifice Size (in): 0.060
- Fluid Orifice Size (mm): 1.52
- Gun Activation: Manual
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 03 (.060)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
- Overall Length (cm): 7.9
- Over
Gun, P2, Automatic
GG GCP4R0
P2 GUN, AUTOMATIC
Graco GCP4R0 Probler P2 Automatic Gun with 00 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Model: P2
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.074
- Fluid Orifice Size (in): 0.029
- Fluid Orifice Size (mm): 0.74
- Gun Activation: Automatic
- Gun Series: Automatic
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 00 (.029)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
- Overall Length (cm): 7.9
- Overall Length (in): 3.125
- Overall Length (mm): 79
- Overall Width (cm): 17.4
- Overall Width (in): 6
Gun, Assy, Probler P2 Elite
GG GCP3RA
P2 GUN, ASSY, GUN, PROBLER ELITE
Graco GCP3RA Probler P2 Elite Gun Assembly with AA Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Allows use of additional accessories
- Alternate side block hose routings
- Allows filters to be easily removed
- Model: P2
- Series: Elite
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.091
- Fluid Orifice Size (in): 0.036
- Fluid Orifice Size (mm): 0.91
- Gun Activation: Manual
- Gun Series: Elite
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 220
- Maximum Fluid Pressure (kPa): 22000
- Maximum Fluid Pressure (MPa): 22
- Maximum Fluid Pressure (psi): 3200
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: AA (0.036)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
- Overall Length (cm): 7.9
- Ove
Supply Uni Check Mate, 10:1, Ram, 200L, Single EPDM Wiper
GG GDG959
DURA-FLO SUPPLY UNIT, 10:1, 3.0 RAM, 200L
Graco GDG959 Supply Unit, Check-Mate, 10:1, 3 in. Ram, 200L, Single EPDM Wiper
Graco Supply Systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.
Application: Bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials- For large drums up to 200 liter (55 gal)
- Graco D200 - For high-volume in-plant applications
- Industry-first controls give you immediate and important information at the touch of a button
- Platen wipers can be replaced in seconds
- Pumps quick-disconnect coupler, turnbuckle mount and pump cartridge packings let you service the pump without removing it from the ram
- High-quality, durable parts reduce maintenance time, maximize uptime
- Model: Dura-Flo
- Series: D200
- Ambient/Warm Melt/Hot Melt: Ambient
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
- Container Type: Drum
- Material Container Volume (gal): 52.8
- Material Container Volume (l): 200
- Maximum Air Inlet Pressure (bar): 10.34
- Maximum Air Inlet Pressure (kg/cm 2): 10.55
- Maximum Air Inlet Pressure (kPa): 1034
- Maximum Air Inlet Pressure (psi): 150
- Maximum Flow Rate (GPM): 17.4
- Maximum Flow Rate (L/min): 65.9
- Maximum Fluid Pressure (bar): 81.4
- Maximum Fluid Pressure (kPa): 8140
- Maximum Fluid Pressure (psi): 1180
- Maximum Fluid Pressure (bar): 81.4
- Maximum Fluid Pressure (kPa): 8140
- Maximum Fluid Pressure (psi): 1180
- Maximum Height (cm): 101.6
- Maximum Height (ft): 3.33
- Maximum Height (in): 40
- Maximum Height (m): 1.02
- Maximum Height (mm): 1016
- Maximum Operating Temperature ( degree C): 49
- Maximum Operating Temperature ( degree F): 120
- Minimum Height (cm): 164.6
- Minimum Height (ft): 5.4
- Minimum Height (in): 64.8
- Minimum Height (m): 1.65
- Minimum Height (mm): 1646
- Overall Depth (cm): 63.5
- Overall Depth (in): 25
- Overall Depth (mm): 635
- Overall Width (cm): 106.7
- Overall Width (in): 42
- Overall Width (mm): 1067
- Power Type: Pneumatic
- Pump Ratio: 10:1
- Pump Type: Double Ball
- Ram Material: Carbon Steel
Gun, P2, Automatic
GG GCP4R1
P2 GUN, AUTOMATIC
Graco GCP4R1 Probler P2 Automatic Gun with 01 Mix Chamber Kit
The Probler P2 Gun is lightweight and easy to maneuver - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of triggering force - much more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to use.
Application: For high output spray polyurethane foam and polyurea applications.- Easy daily maintenance
- Responsive trigger action
- Easy-to-replace mix chamber insert
- Ergonomic handle and balanced design
- Model: P2
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4-18
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPT
- Compatible Material: Adhesives, Polyurethane, Roof Coating, Polyurea, Polyurethane Coating
- Component A Inlet Size (cm): 1.27
- Component A Inlet Size (in): 1/2-20
- Component A Inlet Size (mm): 12.7
- Component A Inlet Thread Type: UNF
- Component B Inlet Size (cm): 1.11125
- Component B Inlet Size (in): 7/16-18
- Component B Inlet Size (mm): 11.1125
- Component B Inlet Thread Type: UNF
- Component Type: Plural-Component
- Fluid Orifice Size (cm): 0.107
- Fluid Orifice Size (in): 0.042
- Fluid Orifice Size (mm): 1.07
- Gun Activation: Automatic
- Gun Series: Automatic
- Gun Type: Air-Purge
- Gun Weight (g): 1770
- Gun Weight (kg): 1.77
- Gun Weight (lb): 3.9
- Gun Weight (oz): 32.4
- Maximum Air Inlet Pressure (bar): 7.6
- Maximum Air Inlet Pressure (kPa): 760
- Maximum Air Inlet Pressure (MPa): 0.76
- Maximum Air Inlet Pressure (psi): 110
- Maximum Air Pressure (bar): 7.6
- Maximum Air Pressure (kPa): 760
- Maximum Air Pressure (MPa): 0.76
- Maximum Air Pressure (psi): 110
- Maximum Flow Rate (kg/min): 18
- Maximum Flow Rate (lb/min): 40
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Pressure (bar): 241
- Maximum Fluid Pressure (kPa): 24100
- Maximum Fluid Pressure (MPa): 24.1
- Maximum Fluid Pressure (psi): 3500
- Maximum Fluid Temperature ( degree C): 93
- Maximum Fluid Temperature ( degree F): 200
- Maximum Fluid Working Pressure (bar): 221
- Maximum Fluid Working Pressure (MPa): 22.1
- Maximum Fluid Working Pressure (psi): 3200
- Minimum Air Inlet Pressure (bar): 6.2
- Minimum Air Inlet Pressure (kPa): 620
- Minimum Air Inlet Pressure (MPa): 0.62
- Minimum Air Inlet Pressure (psi): 90
- Minimum Flow Rate (kg/min): 1.4
- Minimum Flow Rate (lb/min): 3
- Mix Chamber: 01 (.042)
- Overall Height (cm): 12.1
- Overall Height (in): 4.75
- Overall Height (mm): 121
- Overall Length (cm): 7.9
- Overall Length (in): 3.125
- Overall Length (mm): 79
- Overall Width (cm): 17.4
- Overall Width (in): 6
AA Tip
GG GG3411
TIP, SPRAY,AA4500
Graco GG3411 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.279 mm Orifice, 200-250 mm Fan Width
Tip
GG GG3413
TIP, SPRAY,AA4500
Graco GG3413 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.330 mm Orifice, 200-250 mm Fan Width
- Bleed Type: Non-Bleeder
- Compatible Material: Enamel, Epoxies, High Solids, Latex, Lacquer, Plural Component Materials, Sealants, Urethane, UV Coating, Waterborne
AA Tip
GG GG3415
TIP, SPRAY,AA4500
Graco GG3415 Spray Tip for AA Pro Xs4 and Pro Auto Xs Spray Gun- 0.381 mm Orifice, 200-250 mm Fan Width
- Bleed Type: Non-Bleeder
- Compatible Material: CARC, Enamel, Epoxies, Fast-Set, High Solids, Latex, Plural Component Materials, Sealants, Solventborne, Urethane, Waterborne
Tip
GG GG3513
TIP, SPRAY,AA4500
Graco GG3513 10-12 in (250 mm) Fan Width, .013 in (.330 mm) Orifice Size Spray Tip for Pro Xs4 AA Spray Gun
AA Tip
GG GG4411
TIP, SPRAY
Graco GG4411 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.011 inch (0.279 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
GG GG4413
TIP, SPRAY
Graco GG4413 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
- Bleed Type: Non-Bleeder
- Compatible Material: Base Coat, Clear Coat, Latex, Plural Component Materials, Primer, Solventborne, Waterborne
High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
GG GG4415
TIP, SPRAY
Graco GG4415 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 8-10 inches (200-250 mm) Fan Width
AA Tip
GG GG4515
TIP, SPRAY
Graco GG4515 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
AA Tip
GG GG4513
TIP, SPRAY
Graco GG4513 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.013 inch (0.330 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
AA Tip
GG GG4517
TIP, SPRAY
Graco GG4517 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.017 inch (0.432 mm) Orifice Size, 10-12 inches (250-300 mm) Fan Width
AA Tip
GG GG4615
TIP, SPRAY
Graco GG4615 High Wear Industrial Spray Tip for G15 and G40 Guns, 0.015 inch (0.381 mm) Orifice Size, 12-14 inches (300-350 mm) Fan Width
High Wear Industrial Spray Tip for G15 and G40 Guns, 0.021in Orifice Size, 14-16in Fan Width
GG GG4721
High Wear Industrial Spray Tip for G15 and G40 Guns, 0.021in Orifice Size, 14-16in Fan Width
Hose, Cpld, 4500Psi, 1/4Id, 3Ft
GG H42503
HOSE, CPLD, 4500PSI, 1/4ID, 3FT
Graco H42503 Xtreme-Duty 4500 psi High Pressure Hose- 1/4 in hose diameter, 3 ft length
Xtreme-Duty Airless High-Pressure Hose is designed to withstand the rigors of high-pressure spraying. Its durable design meets exacting standards - ultimately reducing downtime due to hose failure.
Application: For high-pressure spraying applications- A complete line of hoses for all your high pressure spraying - up to 7250 psi
- Passes rigorous tests for quality and performance standards
- Hose cover is chemical resistant - withstands a variety of solvents, acids and bases
- Color-coded by pressure to take the guesswork out of using the right hose
- Connection Type: Coupling
- Inside Diameter (cm): 0.635
- Inside Diameter (in): 1/4
- Inside Diameter (mm): 6.35
- Material: Nylon
- Maximum Working Pressure (bar): 315
- Maximum Working Pressure (kPa): 3150
- Maximum Working Pressure (MPa): 31.5
- Maximum Working Pressure (psi): 4500
HOSE Cpld, 4500Psi, 1/4Id, 100Ft
GG H4251X
HOSE CPLD, 4500PSI, 1/4ID, 100FT
Graco H4251X Xtreme-Duty 4500 psi High Pressure Hose- 1/4 in hose diameter, 100 ft length
Xtreme-Duty Airless High-Pressure Hose is designed to withstand the rigors of high-pressure spraying. Its durable design meets exacting standards - ultimately reducing downtime due to hose failure.
Application: For high-pressure spraying applications- A complete line of hoses for all your high pressure spraying - up to 7250 psi
- Passes rigorous tests for quality and performance standards
- Hose cover is chemical resistant - withstands a variety of solvents, acids and bases
- Color-coded by pressure to take the guesswork out of using the right hose
- Connection Type: Coupling
- Inside Diameter (cm): 0.635
- Inside Diameter (in): 1/4
- Inside Diameter (mm): 6.35
- Material: Nylon
- Maximum Working Pressure (bar): 315
- Maximum Working Pressure (kPa): 3150
- Maximum Working Pressure (MPa): 31.5
- Maximum Working Pressure (psi): 4500
Hose, Cpld, 4500Psi, 3/8Id, 3Ft
GG H43803
HOSE, CPLD, 4500PSI, 3/8ID, 3FT
Graco H43803 Xtreme-Duty 4500 psi High Pressure Hose- 3/8 in hose diameter, 3 ft length
Xtreme-Duty Airless High-Pressure Hose is designed to withstand the rigors of high-pressure spraying. Its durable design meets exacting standards - ultimately reducing downtime due to hose failure.
Application: For high-pressure spraying applications- A complete line of hoses for all your high pressure spraying - up to 7250 psi
- Passes rigorous tests for quality and performance standards
- Hose cover is chemical resistant - withstands a variety of solvents, acids and bases
- Color-coded by pressure to take the guesswork out of using the right hose
- Connection Type: Coupling
- Inside Diameter (cm): 0.9525
- Inside Diameter (in): 3/8
- Inside Diameter (mm): 9.525
- Material: Nylon
- Maximum Working Pressure (bar): 315
- Maximum Working Pressure (kPa): 3150
- Maximum Working Pressure (MPa): 31.5
- Maximum Working Pressure (psi): 4500
Hose Cpld, 4500Psi, 3/8Id, 100Ft
GG H4381X
HOSE CPLD, 4500PSI, 3/8ID, 100FT
Graco H4381X Xtreme-Duty 4500 psi High Pressure Hose- 3/8 in hose diameter, 100 ft length
Xtreme-Duty Airless High-Pressure Hose is designed to withstand the rigors of high-pressure spraying. Its durable design meets exacting standards - ultimately reducing downtime due to hose failure.
Application: For high-pressure spraying applications- A complete line of hoses for all your high pressure spraying - up to 7250 psi
- Passes rigorous tests for quality and performance standards
- Hose cover is chemical resistant - withstands a variety of solvents, acids and bases
- Color-coded by pressure to take the guesswork out of using the right hose
- Connection Type: Coupling
- Inside Diameter (cm): 0.9525
- Inside Diameter (in): 3/8
- Inside Diameter (mm): 9.525
- Material: Nylon
- Maximum Working Pressure (bar): 315
- Maximum Working Pressure (kPa): 3150
- Maximum Working Pressure (MPa): 31.5
- Maximum Working Pressure (psi): 4500
Hose, Cpld, 4500 Psi, 3/8 Id, 50 Ft
GG H43850
HOSE, CPLD, 4500 PSI, 3/8 ID, 50 FT
Graco H43850 Xtreme-Duty 4500 psi High Pressure Hose- 3/8 in hose diameter, 50 ft length
Xtreme-Duty Airless High-Pressure Hose is designed to withstand the rigors of high-pressure spraying. Its durable design meets exacting standards - ultimately reducing downtime due to hose failure.
Application: For high-pressure spraying applications- A complete line of hoses for all your high pressure spraying - up to 7250 psi
- Passes rigorous tests for quality and performance standards
- Hose cover is chemical resistant - withstands a variety of solvents, acids and bases
- Color-coded by pressure to take the guesswork out of using the right hose
- Connection Type: Coupling
- Inside Diameter (cm): 0.9525
- Inside Diameter (in): 3/8
- Inside Diameter (mm): 9.525
- Material: Nylon
- Maximum Working Pressure (bar): 315
- Maximum Working Pressure (kPa): 3150
- Maximum Working Pressure (MPa): 31.5
- Maximum Working Pressure (psi): 4500
Hose, Cpld, 4500Psi, 1/2Id, 50Ft
GG H45050
HOSE, CPLD, 4500PSI, 1/2ID, 50FT
Graco H45050 Xtreme-Duty 4500 psi High Pressure Hose- 1/2 in hose diameter, 50 ft length
Xtreme-Duty Airless High-Pressure Hose is designed to withstand the rigors of high-pressure spraying. Its durable design meets exacting standards - ultimately reducing downtime due to hose failure.
Application: For high-pressure spraying applications- A complete line of hoses for all your high pressure spraying - up to 7250 psi
- Passes rigorous tests for quality and performance standards
- Hose cover is chemical resistant - withstands a variety of solvents, acids and bases
- Color-coded by pressure to take the guesswork out of using the right hose
- Connection Type: Coupling
- Inside Diameter (cm): 1.27
- Inside Diameter (in): 1/2
- Inside Diameter (mm): 12.7
- Material: Nylon
- Maximum Working Pressure (bar): 315
- Maximum Working Pressure (kPa): 3150
- Maximum Working Pressure (MPa): 31.5
- Maximum Working Pressure (psi): 4500
Hose Cpld, 5600Psi, 1/4Id, 50Ft
GG H52550
HOSE CPLD, 5600PSI, 1/4ID, 50FT
Graco H52550 Xtreme-Duty 5600 psi High Pressure Hose- 1/4 in hose diameter, 50 ft length
Xtreme-Duty Airless High-Pressure Hose is designed to withstand the rigors of high-pressure spraying. Its durable design meets exacting standards - ultimately reducing downtime due to hose failure.
Application: For high-pressure spraying applications- A complete line of hoses for all your high pressure spraying - up to 7250 psi
- Passes rigorous tests for quality and performance standards
- Hose cover is chemical resistant - withstands a variety of solvents, acids and bases
- Color-coded by pressure to take the guesswork out of using the right hose
- Color: Grey
- Connection Type: Coupling
- Hose Length (ft): 50
- Hose Length (m): 15.2
- Inside Diameter (cm): 0.635
- Inside Diameter (in): 1/4
- Inside Diameter (mm): 6.35
- Material: Nylon
- Maximum Working Pressure (bar): 386
- Maximum Working Pressure (kPa): 38600
- Maximum Working Pressure (MPa): 38.6
- Maximum Working Pressure (psi): 5600
QUANTM H80, 1.5in Tri-Clamp, 3A SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, FL Seat, PO Diaphragm
GG HE80-0192
QUANTM PUMP, QHD-HSFF1FL--POEPSSASF21
Graco HE80-0192 QUANTM h80, 1.5" Tri-clamp, HS SST Electric Diaphragm Pump, 200-240 V, FEP AL Center, FL Seat, PO Diaphragm
QUANTM isn't just another electric pump: it's a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It's time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump.
Application: The groundbreaking new QUANTM electric pumps for large particle applications feature a stainless-steel flapper check design that removes the traditional ball and seat check valve in a normal diaphragm pump. This is critical for applications that involve larger pieces of meat and poultry pieces, pieces of fruit for bakery fillings and jarred fruit, as well as whole vegetables for soups or prepackaged meals. QUANTM electric pumps feature a powerful new electric motor that delivers up to 8x more continuous torque at low speeds than conventional motors. Plus, the fast, easy plug-and-play installation allows you to easily replace your existing pumps without additional investment or infrastructure rework.- Revolutionary Design
- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Efficient Electric Motor
- FEP coated aluminum electric drive
- 240 VAC 1Ph motor with 15 ft cord and NEMA L15-20plug
- Non-hazardous
- Materials of Construction
- 32 Ra surface finish 316L stainless steel fluid section with tri-clamp center port
- Internal components include 316L stainless steel seat, 316L stainless steel Flapper ball, PTFE overmold diaphragm and EPDM manifold o-ring
- EN 2.1 material certification
- Model: QUANTM
- Series: h80
- Application: Food, Beverage, Personal Care, Pharmaceutical
- Ball Material: 316L Stainless Steel Flapper
- Center Section Material: FEP Coated Aluminum
- Connection Type: Tri-Clamp
- Cord Length (ft): 15
- Cord Length (m): 4.57
- Diaphragm Material: PTFE Overmold
- Fluid Inlet Size (in): 1.5
- Fluid Inlet Size (mm): 38
- Fluid Inlet Thread Type: Tri-Clamp
- Fluid Outlet Size (in): 1.5
- Fluid Outlet Size (mm): 38
- Fluid Outlet Thread Type: Tri-Clamp
- Fluid Section: 316L Stainless Steel, Center Port, Tri-Clamp
- Fluid Section Material: 316L Stainless Steel
- Hazardous Location Approval: None
Gun, Pro Xp Electrostatic, 85Kv, Aa, Smt.
GG H85M10
PRO XP GUN, ES, 85KV, AA, SMART
Graco H85M10 Pro Xp85 Air Assist Manual Electrostatic Gun, 85 kV, with smart display, standard coatings, includes AEM or AEF tip of choice
Pro Xp85 kV air-assist gun maximizes transfer efficiency and lowers cost of ownership. Pro Xp85 AA gun line includes Standard and Smart models.
- High quality spray performance with a one-piece aircap and variety of spray tips
- Alternator speed indicator light ensures your turbine speed is running at the correct level
- Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
- Internal power supply reduces operator fatigue with no heavy cords to slow you done
- Rugged, dependable design supported by a three year warranty
- Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Gracos requirements
- Model: Pro Xp
- Series: 85
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Application: Electrostatic, Standard
- Applicator Type: Manual
- Coating Type: Standard
- Compatible Paint Type: Epoxy, High Solids, Lacquers, Plural Component Materials, Polyurethanes, Solvent borne, Urethanes, UV Curing, Varnishes,
- Display Type: Smart
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Type: Electrostatic
- Gun Weight (g): 728
- Gun Weight (kg): 0.73
- Gun Weight (lb): 1.6
- Gun Weight (oz): 25.68
- Includes: Smart Display, Tip Guard Air Cap, Tip of Choice, Tool Kit, Gun Cover, Exhaust Tube,
- Maximum Fluid Pressure (bar): 210
- Maximum Fluid Pressure (kg/cm 2): 214.14
- Maximum Fluid Pressure (kPa): 21000
- Maximum Fluid Pressure (MPa): 21
- Maximum Fluid Pressure (psi): 3000
- Maximum Fluid Temperature ( degree C): 48
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Pressure (bar): 210
- Maximum Fluid Pressure (kg/cm 2): 214.14
- Maximum Fluid Pressure (kPa): 21000
- Maximum Fluid Pressure (MPa): 21
- Maximum Fluid Pressure (psi): 3000
- Maximum Fluid Temperature ( degree C): 48
- Maximum Fluid Temperature ( degree F): 120
- Maximum Paint Resistivity (megohm/cm): Infinity
- Minimum Paint Resistivity (megohm/cm): 3
- Overall Length (cm): 27.18
- Overall Length (in): 10.7
- Overall Length (mm): 271.8
QUANTM i30, 1in Tri-clamp, FG SST electric diaphragm pump, a FluxCore drive, 100-120 V
GG HE30-0009
QUANTM PUMP, QHC-FGFF5SSPTPSPTS130021
Graco HE30-0009 QUANTM h30, 1" FG SST Electric Diaphragm Pump, 100-120 V, FEP AL Center, SS Seat, PT Ball, PS Diaphragm
QUANTM isn't just another electric pump: it's a game-changer. QUANTM features a revolutionary electric motor design that will reduce operational costs and delivers the reliability to keep your production lines running. With multiple fluid path options containing different materials of construction, QUANTM is ideal for most fluid applications as a highly reliable drop-in replacement for your current less-efficient pneumatic pumps or a perfect fit for greenfield construction. The unique self-priming, seal-less design delivers smooth and steady flow and is the only electric diaphragm pump on the market that stalls under pressure to reduce downtime caused by pump failures from clogged lines or closed valves. QUANTM is engineered to be quieter, more efficient and ultra-dependable while delivering energy savings that will go a long way to reinforcing your sustainability reputation. It's time to rethink your pump strategy and elevate your bottom line by converting to a QUANTM electric pump.
Application: Graco food-grade pumps are our most popular series for general food transfer. With their all-stainless-steel construction and 125 Ra surface finish, the groundbreaking new QUANTM food-grade electric pumps are certified to handle a wide range of food and beverage products and meet certification requirements for some personal care applications as well. From dressings, sauces, oils, syrups to soaps, creams and solvents, QUANTM electric food-grade pumps are a workhorse for almost any hygienic food-grade application. The powerful new electric motor delivers up to 8x more continuous torque at low speeds than conventional motors and the fast, easy plug-and-play installation allows you to easily replace existing pumps without additional investment or infrastructure rework.- Revolutionary Design
- Replace existing air operated pumps with electric pump technology that stalls under pressure and includes AutoPrime feature
- Compact and efficient electric drive removes the gearbox providing a comparable footprint to a pneumatic diaphragm pump
- Up to 80% reduction in energy consumption compared to pneumatic pumps, reducing operating costs and providing a quick investment payback
- Quiet operation reduces plant noise and improves employee safety and health
- Smart pump control provides more accurate flow set points and built-in I/O
- Efficient Electric Motor
- FEP coated aluminum electric drive
- 120 VAC 1Ph motor with 15 ft cord and NEMA 5-15 plug
- Non-hazardous
- Materials of Construction
- 125 Ra surface finish 316 stainless steel fluid section with tri-clamp center port
- Internal components include 316L stainless steel seat, PTFE ball, PTFE/Santoprene 2-Piece diaphragm and PTFE manifold o-ring
- EN 2.1 material certification
- Model: QUANTM
- Series: h30
- Application: Food, Beverage, Personal Care, Pharmaceutical
- Ball Material: PTFE
- Center Section Material: FEP Coated Aluminum
- Connection Type: Tri-Clamp
- Cord Length (ft): 15
- Cord Length (m): 4.57
- Diaphragm Material: PTFE/Santoprene 2-Piece
- Fluid Inlet Size (in): 1.5
- Fluid Inlet Size (mm): 38
- Fluid Inlet Thread Type: Tri-Clamp
- Fluid Outlet Size (in): 1.5
- Fluid Outlet Size (mm): 38
- Fluid Outlet Thread Type: Tri-Clamp
- Fluid Section: 316 Stainless Steel, End Port, Tri-Clamp
- Fluid Section Material: 316 Stainless Steel
- Hazardous Location Approval:
Reel, Hose, 3/4 X 50, Def, Blue
GG HSDD5B
XD SERIES 30 REEL, HOSE, 3/4 X 50, DEF, BLUE
Graco HSDD5B XD30, DEF, 3/4 in. (19 mm) Inlet, 3/4 in. X 50 ft. (19 mm X 15 m) Hose, NPT, Truck/Bench Mount, Metallic Blue
Graco's XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).
Application: Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks.- Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
- Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
- Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
- Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications
- Model: XD
- Series: 30
- Application: Diesel Fuel
- Color: Metallic Blue
- Frame Type: Dual Pedestal
- Hose Inside Diameter (in): 3/4
- Hose Inside Diameter (mm): 19.05
- Hose Length (ft): 50
- Hose Length (m): 15
- Hose Reel Type: Reel with Hose
- Includes Hose: Yes
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: BSPP
- Maximum Working Pressure (psi): 50
- Mount Location: Truck Mount, Bench Mount
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Overall Height (in): 23.10
- Overall Height (mm): 588
- Overall Length (in): 22.12
- Overall Length (mm): 561.73
- Overall Width (in): 9.0
- Overall Width (mm): 229
- Recommended Environment: Indoor, Outdoor
- Recommended Fluid Type: DEF
XD30, DEF, 3/4 in. (19 mm) Inlet, Bare Reel (3/4 in. X 50 ft. (19 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Metallic Blue
GG HSDDDB
XD SERIES 30 REEL, HOSE, BARE, DEF, BLUE
Graco HSDDDB XD30, DEF, 3/4 in. (19 mm) Inlet, Bare Reel (3/4 in. X 50 ft. (19 mm X 15 m) Capacity), NPT, Truck/Bench Mount, Metallic Blue
Graco's XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-50 foot (9.1-15 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).
Application: Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks.- Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
- Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
- Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
- Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications
- Model: XD
- Series: 30
- Application: Diesel Fuel
- Bare Reel: 1
- Color: Metallic Blue
- Frame Type: Enclosed
- Hose Inside Diameter (in): 3/4
- Hose Inside Diameter (mm): 19.05
- Hose Length (ft): 50
- Hose Length (m): 15
- Hose Reel Type: Bare Reel
- Includes Hose: No
- Inlet Size (in): 3/4
- Inlet Size (mm): 19.05
- Inlet Thread Type: BSPP
- Maximum Working Pressure (psi): 50
- Mount Location: Truck Mount, Bench Mount
- Outlet Size (in): 3/4
- Outlet Size (mm): 19.05
- Overall Height (in): 23.10
- Overall Height (mm): 588
- Overall Length (in): 22.12
- Overall Length (mm): 561.73
- Overall Width (in): 9.0
- Overall Width (mm): 229
- Recommended Environment: Indoor, Outdoor
- Recommended Fluid Type: DEF
Gun, Pro Xp Electrostatic, 85Kv, Aa, Std.
GG H85T10
PRO XP GUN, ES, 85KV, AA
Graco H85T10 Pro Xp85 Air Assist Manual Electrostatic Gun, 85 kV, with standard display, standard coatings, includes AEM or AEF tip of choice
Pro Xp85 kV air-assist gun maximizes transfer efficiency and lowers cost of ownership. Pro Xp85 AA gun line includes Standard and Smart models.
- High quality spray performance with a one-piece aircap and variety of spray tips
- Alternator speed indicator light ensures your turbine speed is running at the correct level
- Smart Controls help you analyze performance, adapt to your voltage needs and make troubleshooting easier
- Internal power supply reduces operator fatigue with no heavy cords to slow you done
- Rugged, dependable design supported by a three year warranty
- Every gun is tested and delivered with a certificate indicating the spray pattern, mechanical performance and electrical performance meets Gracos requirements
- Model: Pro Xp
- Series: 85
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Application: Electrostatic, Standard
- Applicator Type: Manual
- Coating Type: Standard
- Compatible Paint Type: Epoxy, High Solids, Lacquers, Latex, Plural Component Materials, Polyurethanes, Urethanes, UV Curing, Varnishes, Waterborne
- Display Type: Standard
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- Gun Activation: Manual
- Gun Type: Electrostatic
- Gun Weight (g): 728
- Gun Weight (kg): 0.73
- Gun Weight (lb): 1.6
- Gun Weight (oz): 25.68
- Includes: Tip Guard Air Cap, Tip of Choice, Tool Kit, Gun Cover, Exhaust Tube
- Maximum Fluid Pressure (bar): 210
- Maximum Fluid Pressure (kg/cm 2): 214.14
- Maximum Fluid Pressure (kPa): 21000
- Maximum Fluid Pressure (MPa): 21
- Maximum Fluid Pressure (psi): 3000
- Maximum Fluid Temperature ( degree C): 48
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Pressure (bar): 210
- Maximum Fluid Pressure (kg/cm 2): 214.14
- Maximum Fluid Pressure (kPa): 21000
- Maximum Fluid Pressure (MPa): 21
- Maximum Fluid Pressure (psi): 3000
- Maximum Fluid Temperature ( degree C): 48
- Maximum Fluid Temperature ( degree F): 120
- Maximum Paint Resistivity (megohm/cm): Infinity
- Minimum Paint Resistivity (megohm/cm): 3
- Overall Length (cm): 27.18
- Overall Length (in): 10.7
- Overall Length (mm): 271.8
Hose Reel, 1/2 Inlet, Bare Reel. No Hose
GG HSHFFB
XD SERIES 30 REEL, 3/8 X BARE, P/W, BLUE
Graco HSHFFB XD30, Pressure Wash, 1/2 in. (13 mm) Inlet, Bare Reel (3/8 in. X 75 ft. (10 mm X 23 m) Capacity), NPT, Truck/Bench Mount, Metallic Blue
Graco's XD30 Series Hose Reels are used in applications requiring longer-range dispense and higher capacity than the standard XD10 and XD20 Series. The Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (9.1-22.8 meters) hose capacity for a wide variety of applications. Typical fluids handled include: Petroleum- and synthetic-based oils, diesel fuel, air, water, antifreeze, windshield washer fluid, pressure wash, waste oil and diesel exhaust fluid (DEF).
Application: Ideal for rugged indoor and outdoor use in heavy-duty truck dealerships, fleet maintenance, mining maintenance, public works garages, construction vehicle maintenance, agriculture and service trucks.- Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
- Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
- Optional Adjustable Arm - Easily change the arm position for your application, order with arm (HS models) or without (HN models)
- Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 30-75 foot (91-228 meters) hose capacity for a wide variety of applications
- Model: XD
- Series: 30
- Application: Pressure Wash
- Bare Reel: 1
- Color: Metallic Blue
- Dry Weight (lb): 98
- Frame Type: Dual Pedestal
- Hose Inside Diameter (in): 3/8
- Hose Inside Diameter (mm): 9.525
- Hose Length (ft): 75
- Hose Length (m): 23
- Hose Reel Type: Bare Reel
- Includes Hose: No
- Inlet Size (in): 1/2
- Inlet Size (mm): 12.7
- Inlet Thread Type: NPSM
- Maximum Working Pressure (psi): 5000
- Mount Location: Truck Mount, Bench Mount
- Outlet Size (in): 3/8
- Outlet Size (mm): 9.525
- Overall Height (in): 23.10
- Overall Height (mm): 588.00
- Overall Length (in): 22.12
- Overall Length (mm): 561.73
- Overall Width (in): 9.0
- Overall Width (mm): 229
- Recommended Environment: Indoor, Outdoor
- Recommended Fluid Type: Pressure Wash
Gun, Pro Xp Electrostatic, 85Kv, Aa, Std
GG HA1T10
PRO XP GUN, ES, AUTO REAR, AA
Graco HA1T10 Pro Xp Auto Air-Assist Electrostatic Spray Gun, standard model, with rear manifold, 85 kV, includes AEM or AEF tip of choice
Pro Xp Auto Air-Assist has an 85 kV power supply and internal power so there's no electrical cord to damage or replace. Standard gun models always run at 85 kV power and include an alternator speed indicator to display electrostatic performance. Ideal for high pressure spraying designed to improve transfer efficiency and deliver a high quality finish.
- Versatile product line gives you more models to choose from and greater spraying flexibility with air spray, air assist and waterborne guns
- Manifold style fits almost any systems requirement - back manifold is ideal for stationary and reciprocator systems and bottom manifold is ideal for robot mounting
- 85 kV power supply and internal power so theres no electrical cord to worry about damaging or replacing
- Durable components reduce cost of ownership, supported by a three year warranty
- Model: Pro Xp
- Series: Auto
- Air Inlet Size (cm): 0.635
- Air Inlet Size (in): 1/4
- Air Inlet Size (mm): 6.35
- Air Inlet Thread Gender: Male
- Air Inlet Thread Type: NPSM
- Application: Electrostatic, Standard
- Applicator Type: Automatic
- Coating Type: Standard
- Compatible Paint Type: Solvent borne
- Display Type: Standard
- Fluid Inlet Size (in): 1/4
- Fluid Inlet Thread Gender: Male
- Fluid Inlet Thread Type: NPSM
- For Use With: Pro Xp Auto Control Module
- Gun Activation: Automatic
- Gun Type: Electrostatic
- Gun Weight (g): 1197
- Gun Weight (kg): 1.2
- Gun Weight (lb): 2.64
- Gun Weight (oz): 42.24
- Manifold Type: Rear
- Maximum Fluid Pressure (bar): 210
- Maximum Fluid Pressure (kPa): 21000
- Maximum Fluid Pressure (MPa): 21
- Maximum Fluid Pressure (psi): 3000
- Maximum Fluid Temperature ( degree C): 48
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Pressure (bar): 210
- Maximum Fluid Pressure (kPa): 21000
- Maximum Fluid Pressure (MPa): 21
- Maximum Fluid Pressure (psi): 3000
- Maximum Fluid Temperature ( degree C): 48
- Maximum Fluid Temperature ( degree F): 120
- Maximum Paint Resistivity (megohm/cm): Infinity
- Minimum Paint Resistivity (megohm/cm): 3
- Overall Length (cm): 27.94
- Overall Length (in): 11
- Overall Length (mm): 279.4
Gun, XTR 7+, 4 Fng, XHDRAC
GG XTR722
XTR+ GUN, XTR7+, OVL HND, 4FNG, XHDRAC
Graco XTR722 XTR7+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip
New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.
Application: Designed to conquer the toughest protective coatings.- Self-locking needle design for faster rebuilds
- XHD RAC tip provides exceptional life, pattern and finish
- Easily remove and clean gun filter with trigger guard integrated wrench
- Insulated handle for sprayer comfort
- Model: XTR7+
- Maximum Working Pressure (bar): 500
- Maximum Working Pressure (MPa): 50
- Maximum Working Pressure (psi): 7250
Gun, XTR7+, Airless Spray Gun, Round Handle, 4-Finger Trigger, Flat Tip
GG XTR721
XTR+ GUN, XTR7+, 1" HND, 4FNG, FLT TIP
Graco XTR721 XTR7+ Airless Spray Gun, Round Handle, 4-Finger Trigger, Flat Tip
New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.
Application: Designed to conquer the toughest protective coatings.- Self-locking needle design for faster rebuilds
- Flat tip provides exceptional life, pattern and finish
- Easily remove and clean gun filter with trigger guard integrated wrench
- Model: XTR7+
- Maximum Working Pressure (bar): 500
- Maximum Working Pressure (MPa): 50
- Maximum Working Pressure (psi): 7250
XTR7+Airless Spray Gun, Rnd Handle, Two Finger, XHD RAC Tip
GG XTR725
XTR+ GUN, XTR7+, 1" HND, 2FNG, XHDRAC
Graco XTR725 XTR7+ Airless Spray Gun, Round Handle, 2-Finger Trigger, XHD RAC Tip
New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.
Application: Designed to conquer the toughest protective coatings.- Self-locking needle design for faster rebuilds
- XHD RAC tip provides exceptional life, pattern and finish
- Easily remove and clean gun filter with trigger guard integrated wrench
- Model: XTR7+
- Maximum Working Pressure (bar): 500
- Maximum Working Pressure (MPa): 50
- Maximum Working Pressure (psi): 7250
Kit, PC Chamber, Rnd, 000
GG PC20RD
KIT, PC CHAMBER, RND, 000
Graco PC20RD Fusion ProConnect Round 000 Mix Chamber with 0.020 in (0.51 mm) Orifice Size
The Fusion ProConnect Round 000 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.
Application: Designed for durability and smooth assembly- Ultra durable Chromex coating
- Ramp design for quick assembly and proper sealing
- Alignment groove ensures proper assembly
- Model: Fusion PC
- Mix Chamber: 000 (.020)
Kit, PC Chamber, Fl, 00
GG PC29FL
KIT, PC CHAMBER, FL, 00
Graco PC29FL Fusion ProConnect Flat 00 Mix Chamber with 0.029 in (0.74 mm) Orifice Size
The Fusion ProConnect Flat 00 Mix Chamber is designed for sprayers that prefer a flat spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.
Application: Designed for durability and smooth assembly- Ultra durable Chromex coating
- Ramp design for quick assembly and proper sealing
- Alignment groove ensures proper assembly
- Model: Fusion PC
- Mix Chamber: 00 (.029)
Kit, PC Chamber, Rnd, 00
GG PC29RD
KIT, PC CHAMBER, RND, 00
Graco PC29RD Fusion ProConnect Round 00 Mix Chamber with 0.029 in (0.74 mm) Orifice Size
The Fusion ProConnect Round 00 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.
Application: Designed for durability and smooth assembly- Ultra durable Chromex coating
- Ramp design for quick assembly and proper sealing
- Alignment groove ensures proper assembly
- Model: Fusion PC
- Mix Chamber: 00 (.029)
Kit, PC Chamber, Rnd, 00-01
GG PC37RD
KIT, PC CHAMBER, RND, 00-01
Graco PC37RD Fusion ProConnect Round 00-01 Mix Chamber with 0.037 in (0.94 mm) Orifice Size
The Fusion ProConnect Round 00-01 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.
Application: Designed for durability and smooth assembly- Ultra durable Chromex coating
- Ramp design for quick assembly and proper sealing
- Alignment groove ensures proper assembly
- Model: Fusion PC
- Mix Chamber: 00-01 (.037)
Kit, PC Chamber, Fl, 01
GG PC42FL
KIT, PC CHAMBER, FL, 01
Graco PC42FL Fusion ProConnect Flat 01 Mix Chamber with 0.042 in (1.1 mm) Orifice Size
The Fusion ProConnect Flat 01 Mix Chamber is designed for sprayers that prefer a flat spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.
Application: Designed for durability and smooth assembly- Ultra durable Chromex coating
- Ramp design for quick assembly and proper sealing
- Alignment groove ensures proper assembly
- Model: Fusion PC
- Mix Chamber: 01 (.042)
Fusion ProConnect Round 01 Mix Chamber
GG PC42RD
KIT, PC CHAMBER, RND, 01
Graco PC42RD Fusion ProConnect Round 01 Mix Chamber with 0.042 in (1.1 mm) Orifice Size
The Fusion ProConnect Round 01 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.
Application: Designed for durability and smooth assembly- Ultra durable Chromex coating
- Ramp design for quick assembly and proper sealing
- Alignment groove ensures proper assembly
- Model: Fusion PC
- Mix Chamber: 01 (.042)
Kit, PC Chamber, Rnd, 02
GG PC52RD
KIT, PC CHAMBER, RND, 02
Graco PC52RD Fusion ProConnect Round 02 Mix Chamber with 0.052 in (1.3 mm) Orifice Size
The Fusion ProConnect Round 02 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.
Application: Designed for durability and smooth assembly- Ultra durable Chromex coating
- Ramp design for quick assembly and proper sealing
- Alignment groove ensures proper assembly
- Model: Fusion PC
- Mix Chamber: 02 (.052)
Fusion ProConnect Round 03 Mix Chamber
GG PC60RD
KIT, PC CHAMBER, RND, 03
Graco PC60RD Fusion ProConnect Round 03 Mix Chamber with 0.060 in (1.5 mm) Orifice Size
The Fusion ProConnect Round 03 Mix Chamber is designed for sprayers that prefer a round spray pattern. All Fusion PC Mix Chambers are protected by an ultra-durable Chromex coating and have been engineered to smoothly slide into position without damaging the side seals. In addition, these mix chambers incorporate an alignment groove specifically designed to ensure proper assembly.
Application: Designed for durability and smooth assembly- Ultra durable Chromex coating
- Ramp design for quick assembly and proper sealing
- Alignment groove ensures proper assembly
- Model: Fusion PC
- Mix Chamber: 03 (.060)
SYSM, PCF, 016, CART, HR MTR, IO
GG PF2300
PCF SYSTEM, 016, CART, HR METER, IO
Graco PF2300 16 Styles 100-240 VAC Precision Flow System with Cartridge Regulator, High Resolution Meter and Discrete User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17256.6929133858
- Fluid Outlet Size (in): 1/2
- Fluid Outlet Size (mm): 1725.6692913386
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: Discrete User Interface
- Gun Activation: Automatic
- Includes: Regulator, Flow Meter, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 7500
- Maximum Flow Rate (GPM): 1.98
- Maximum Flow Rate (L/min): 7.5
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 241
- Maximum Fluid Working Pressure (MPa): 24
- Maximum Fluid Working Pressure (psi): 3500
- Maximum Operating Temperature ( degree C): 49
- Maximum Operating Temperature ( degree F): 120
- Maximum Working Pressure (bar): 414
- Maximum Working Pressure (kPa): 41400
SYSTEM, PCF, 016, CART, HR METER, EP
GG PF2320
PCF SYSTEM, 016, CART, HR METER, EP
Graco PF2320 16 Styles 100-240 VAC Precision Flow System with Cartridge Regulator, High Resolution Meter and EtherNet/IP User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17256.6929133858
- Fluid Outlet Size (in): 1/2
- Fluid Outlet Size (mm): 1725.6692913386
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: EtherNet/IP User Interface
- Gun Activation: Automatic
- Includes: Regulator, Flow Meter, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 7500
- Maximum Flow Rate (GPM): 1.98
- Maximum Flow Rate (L/min): 7.5
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 414
- Maximum Fluid Working Pressure (MPa): 41
- Maximum Fluid Working Pressure (psi): 6000
- Maximum Operating Temperature ( degree C): 49
- Maximum Operating Temperature ( degree F): 120
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
SYSTEM, PCF, 016, MAST, HR METER, EP
GG PF2420
PCF SYSTEM, 016, MAST, HR METER, EP
Graco PF2420 16 Styles 100-240 VAC Precision Flow System with Mastic Regulator, High Resolution Meter and EtherNet/IP User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17281.1023622047
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 1728.1102362205
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: EtherNet/IP User Interface
- Gun Activation: Automatic
- Includes: Regulator, Flow Meter, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 7500
- Maximum Flow Rate (GPM): 1.98
- Maximum Flow Rate (L/min): 7.5
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 345
- Maximum Fluid Working Pressure (MPa): 35
- Maximum Fluid Working Pressure (psi): 5000
- Maximum Operating Temperature ( degree C): 49
- Maximum Operating Temperature ( degree F): 120
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
SYSM, PCF, 016, CART, HR MTR, PN
GG PF2340
PCF SYSTEM, 016, CART, HR METER, PN
Graco PF2340 16 Styles 100-240 VAC Precision Flow System with Cartridge Regulator, High Resolution Meter and PROFINET User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17256.6929133858
- Fluid Outlet Size (in): 1/2
- Fluid Outlet Size (mm): 1725.6692913386
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: PROFINET User Interface
- Gun Activation: Automatic
- Includes: Regulator, Flow Meter, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 7500
- Maximum Flow Rate (GPM): 1.98
- Maximum Flow Rate (L/min): 7.5
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 241
- Maximum Fluid Working Pressure (MPa): 24
- Maximum Fluid Working Pressure (psi): 3500
- Maximum Operating Temperature ( degree C): 49
- Maximum Operating Temperature ( degree F): 120
- Maximum Working Pressure (bar): 414
- Maximum Working Pressure (kPa): 41400
PCF System, Precision Dispense
GG PF2440
PCF SYSTEM, 016, MAST, HR METER, PN
Graco PF2440 16 Styles 100-240 VAC Precision Flow System with Mastic Regulator, High Resolution Meter and PROFINET User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17281.1023622047
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 1728.1102362205
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: PROFINET User Interface
- Gun Activation: Automatic
- Includes: Regulator, Flow Meter, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 7500
- Maximum Flow Rate (GPM): 1.98
- Maximum Flow Rate (L/min): 7.5
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 345
- Maximum Fluid Working Pressure (MPa): 35
- Maximum Fluid Working Pressure (psi): 5000
- Maximum Operating Temperature ( degree C): 49
- Maximum Operating Temperature ( degree F): 120
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Ma
System, Pcf, Hfr, Meter
GG PF2421
PCF SYSTEM, 016, MAST, HR METER, EP
Graco PF2421 16 Styles 24 VDC Precision Flow System with Mastic Regulator, High Resolution Meter and EtherNet/IP User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Ambient
- Amperage (A): 4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17281.1023622047
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 1728.1102362205
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: EtherNet/IP User Interface
- Gun Activation: Automatic
- Includes: Regulator, Flow Meter, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 7500
- Maximum Flow Rate (GPM): 1.98
- Maximum Flow Rate (L/min): 7.5
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 49
- Maximum Fluid Temperature ( degree F): 120
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 345
- Maximum Fluid Working Pressure (MPa): 35
- Maximum Fluid Working Pressure (psi): 5000
- Maximum Operating Temperature ( degree C): 49
- Maximum Operating Temperature ( degree F): 120
- Maximum Working Pressure (bar): 345
- Maximum Working Pressure (kPa): 34500
- Max
System, PCF, 016, HTD Reg/Meter
GG PF2500
PCF SYSTEM, 016, HTD REG/METER, IO
Graco PF2500 16 Styles 100-240 VAC Precision Flow System with Heated Mastic Regulator, Heated Standard Resolution Meter and Discrete User Interface
Reduces material waste with superior flow control. Used in conjunction with a material supply system and robotics platform, the Graco PCF Metering System assures a precise, continuous flow of material. Closed-loop technology provides real-time adjustments for changes in material temperatures, viscosities, dispense rates or robot speeds - providing your operation with a highly precise, continuous dispense.
Application: Handles a range of materials, including ambient, warm melt and hot melt materials to 400 degree F (204 degree C) and low to high viscosity materials with unlimited volume.- The next generation of precision metering
Closed-loop real-timecontrol ensures a precise, continuous dispense - improves part quality and reduces material waste
Intuitive user interface simplifies setup, reduces training time
Integrated USB interface for easy data downloads - allows for further analysis of process data
Multiple gun capabilities for additional productivity - lets you program up to four guns
Compact modular design - easy to install, integrate and maintain
Low cost of ownership - fewer wear parts compared to shot meters
- Model: PCF
- Air Inlet Size (in): 1/4
- Air Inlet Thread Gender: Female
- Air Inlet Thread Type: NPT
- Air Outlet Size (in): 5/32
- Ambient/Warm Melt/Hot Melt: Warm-Melt, Hot-Melt
- Amperage (A): 1.4
- Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Spray, Metering, Regulating
- Applicator Type: Automatic
- Compatible Material: Sealants, Adhesives
- Component Type: Single Component
- Flow Control Type: Regulation, Control
- Fluid Inlet Size (in): 3/4
- Fluid Inlet Thread Gender: Female
- Fluid Inlet Thread Type: NPT
- Fluid Outlet Size (cm): 17281.1023622047
- Fluid Outlet Size (in): 3/4
- Fluid Outlet Size (mm): 1728.1102362205
- Fluid Outlet Thread Gender: Female
- Fluid Outlet Thread Type: NPT
- Frequency (Hz): 50/60
- Gateway: Discrete User Interface
- Gun Activation: Automatic
- Includes: Regulator, Flow Meter, FCM Key Token
- Maximum Air Inlet Pressure (bar): 8.27
- Maximum Air Inlet Pressure (kPa): 827
- Maximum Air Inlet Pressure (MPa): 0.83
- Maximum Air Inlet Pressure (psi): 120
- Maximum Ambient Temperature ( degree C): 49
- Maximum Ambient Temperature ( degree F): 120
- Maximum Flow Rate (cc/min): 22500
- Maximum Flow Rate (GPM): 5.94
- Maximum Flow Rate (L/min): 22.5
- Maximum Fluid Temperature ( degree C): 204
- Maximum Fluid Temperature ( degree F): 400
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Temperature ( degree C): 204
- Maximum Fluid Temperature ( degree F): 400
- Maximum Fluid Viscosity (cP): 1000000
- Maximum Fluid Working Pressure (bar): 241
- Maximum Fluid Working Pressure (MPa): 24
- Maximum Fluid Working Pressure (psi): 3500
- Maximum Operating Temperature ( degree C): 204
- Maximum Operating Temperature ( degree F): 400
- Maximum Working Pressure (bar): 345
- Maximum Working Press
Payment options
