Airpower | GRACO INC. S10595 branded products

Agitator, Assembly, Rotary, 8 mm x 12El

GG 60/0351/50

AGITATOR, ASSY, ROTARY, 8MMX12EL

$12.00

Mixer Assembly, Rotary, 6 mm x 12 Obsolete

GG 60/0350/50

Mixer Assembly, Rotary, 6 mm x 12

$6.65

Agitator, Assembly, Rotary, 10 mm x 12El

GG 60/0352/50

AGITATOR, ASSY, ROTARY, 10MMX12EL

$12.00

Tool, Screwdriver, Ball-End 5/64

GG 60-2293

Tool, Screwdriver, Ball-End 5/64

$0.00

Agitator, Assembly, Rotary, 13 mm x 12El

GG 60/0353/50

AGITATOR, ASSY, ROTARY, 13MMX12EL

$64.50

GG 60-2294

Tool, Key, Ball-End, 050

$0.00

GG 60-2296

Tool, Awl

$0.00

GG 60-2300

Kit, Screw

$160.00

GG 60-2302

Tool, Torque, Solenoid

$790.00

GG 605753

Packing Gland U-Cup

$80.00

GG 607718

Washer

$6.65

GG 617195

HOSE, WIPER

$561.00

GG 617230

Gasket

$152.00

GG 617434

Housing, Heated Regulator

$878.00

GG 617604

Seal, PTFE, .25 x .442 x .20

$315.00

GG 617870

CABLE, PRESWIRL, 55 FT

$5,720.00

Seal Kit For #620 Meter Mix Unit

GG 620K

Seal Kit For #620 Meter Mix Unit

$0.00

GG 623865

NOZZLE, EXTRUSION SILICONE

$1,365.00

GG 623875

Manifold, Mix I.G.

$380.00

Fitting, Tee 3/4M Run X 1/4F Branc

GG 624545

Fitting, Tee 3/4M Run X 1/4F Branc

$177.50

GG 626045

Coupling, Checkmate

$236.00

GG 626052

Housing, Fluid Sst

$0.00

GG 626053

$172.00

Md2 Tip, Nose Piece, Manifold, Sst

GG 626054

Md2 Tip, Nose Piece, Manifold, Sst

$1,055.00

GG 626055

Bushing, Handle Mnt

$130.00

GG 626056

Manifold, Gun, Trigger

$1,025.00

GG 626059

Restrictor

$80.25

GG 626060

Insert, Suff-Back, 2K2

$41.10

GG 626062

NEEDLE, 2K2,HARDENED STEEL

$155.00

GG 626063

Housing, Fluid, Aluminum

$0.00

GG 626065

Housing, Lube

$760.00

GG 626067

Piston, Air

$465.00

GG 626066

Cap, Air Cylinder 2K2

$300.00

GG 626069

Manifold

$585.00

GG 626068

SHAFT, SST 2K2

$189.50

GG 626070

Housing, Air Cylinder

$1,280.00

GG 626075

Handle, Valve 2K2

$255.00

GG 626489

COVER, CYLINDER FLUSH BOX

$0.00

GG 626083

Trigger

$124.00

GG 626504

Button, Cylinder

$124.00

GG 626709

Nut

$143.00

GG 626704

Cap, Air Cylinder

$219.00

GG 626702

Housing, Air Cylinder

$455.00

Husky Pump, 1050A-Pa01Aa1Sssssppt

GG 647019

HUSKY PUMP, 1050A-PA01AA1SSSSSPPT

Graco 647019 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & SP Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: Santoprene
        Diaphragm Material: Santoprene
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$2,050.00

Husky Pump, 1050A-Pa01Aa1Ppptpopt

GG 647005

HUSKY PUMP, 1050A-PA01AA1PPPTPOPT

Graco 647005 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section, PP Seats, PTFE Balls & PO Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE Overmold
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$2,270.00

Husky Pump, 1050A-Pa01Aa1Ssptpopt

GG 647032

HUSKY PUMP, 1050A-PA01AA1SSPTPOPT

Graco 647032 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, PTFE Balls & PO Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE Overmold
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$2,300.00

Husky Pump, 1050A-Pa01Aa1Spspsppt

GG 647035

HUSKY PUMP, 1050A-PA01AA1SPSPSPPT

Graco 647035 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, SP Seats, SP Balls & SP Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Santoprene
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: Santoprene
        Diaphragm Material: Santoprene
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$1,630.00

Husky Pump, 1050A-Pa01Aa1Gegegept

GG 647040

HUSKY PUMP, 1050A-PA01AA1GEGEGEPT

Graco 647040 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section with BN Seals, GE Seats, GE Balls & GE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Geolast
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: Geolast
        Diaphragm Material: Geolast
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 66
        Maximum Operating Temperature ( degree F): 150
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9

$1,535.00

Husky Pump, 1050A-Pa01Aa1Ppbnbnpt

GG 647002

HUSKY PUMP, 1050A-PA01AA1PPGEGEPT

Graco 647002 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, PP Seats, GE Balls & GE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Geolast
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: Geolast
        Diaphragm Material: Geolast
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$0.00

Shaft Adjustment

GG 626708

Shaft Adjustment

$0.00

Husky Pump, 1050A-Pa01Aa1Pptptppt

GG 647000

HUSKY PUMP, 1050A-PA01AA1PPTPTPPT

Graco 647000 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, PP Seats, TPE Balls & TPE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: TPE (Hytrel)
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: TPE
        Diaphragm Material: TPE (Hytrel)
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$0.00

Husky Pump, 1050A-Pa01Aa1Ssssptpt

GG 647018

HUSKY PUMP, 1050A-PA01AA1SSSSPTPT

Graco 647018 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 104
        Maximum Operating Temperature ( degree F): 220
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9

$2,230.00

Husky Pump, 1050A-Pa01Aa1Ppacbnpt

GG 647007

HUSKY PUMP, 1050A-PA01AA1PPACBNPT

Graco 647007 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, PP Seats, AC Balls & BN Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Acetal
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: Buna
        Diaphragm Material: Buna-N
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$0.00

Filter, Inlet Filter F1015 1 1/2

GG 6312-9

Filter, Inlet Filter F1015 1 1/2

$8,060.00

Husky Pump, 1050A-Pa01Aa1Sssspopt

GG 647022

HUSKY PUMP, 1050A-PA01AA1SSSSPOPT

Graco 647022 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section, SS Seats, SS Balls & PO Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE Overmold
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$2,450.00

Adapter, Jic08X1Npt, Mm, Ms, 4.5K

GG 6308-82

Adapter, Jic08X1Npt, Mm, Ms, 4.5K

$220.00

POPPET, FOOT VALVE FT-14 PUMP

GG 626582

POPPET, FOOT VALVE FT-14 PUMP

$1,640.00

Husky Pump, 1050A-Pa01Aa1Tptptp, Al Center Section, Tpe Seats, Balls, Diaphragm

GG 647008

HUSKY PUMP, 1050A-PA01AA1TPTPTP

Graco 647008 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, TPE Seats, TPE Balls & TPE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: TPE (Hytrel)
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: TPE
        Diaphragm Material: TPE (Hytrel)
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: End Port, Center Port
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$1,740.00

Husky Pump, 1050A-Pa01Aa1Ssptptpt

GG 647028

HUSKY PUMP, 1050A-PA01AA1SSPTPTPT

Graco 647028 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 104
        Maximum Operating Temperature ( degree F): 220
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9

$2,230.00

Husky Pump, 1050A-Pa01Aa1Ppptptpt

GG 647004

HUSKY PUMP, 1050A-PA01AA1PPPTPTPT

Graco 647004 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 66
        Maximum Operating Temperature ( degree F): 150
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9

$2,010.00

Husky Pump, 1050A-Pa01Aa1Ppbnbnpt

GG 647003

HUSKY PUMP, 1050A-PA01AA1PPBNBNPT

Graco 647003 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, PP Seats, BN Balls & BN Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Buna-N
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: Buna
        Diaphragm Material: Buna-N
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: End Port, Center Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$0.00

Cylinder Button

GG 626523

Cylinder Button

$108.50

Husky Pump, 1050A-Pa01Aa1Acptptpt

GG 647075

HUSKY PUMP, 1050A-PA01AA1ACPTPTPT

Graco 647075 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, AC Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 82
        Maximum Operating Temperature ( degree F): 180
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9

$1,970.00

Husky Pump, 1050A-Pa01Aa2Ppptptpt

GG 647085

HUSKY PUMP, 1050A-PA01AA2PPPTPTPT

Graco 647085 Husky 1050 AL 1 in. (25.4 mm) BSPT Pump, Standard AL Center Section, PP Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Type: BSPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Type: BSPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 66
        Maximum Operating Temperature ( degree F): 150
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9
        Power Source: Air

$2,050.00

Husky Pump, 1050A-Pau1Aa1Tpactp

GG 647016

HUSKY PUMP, 1050A-PAU1AA1TPACTP

Graco 647016 Husky 1050 Air-Operated Double Diaphragm Transfer Pump - 1 in. AL/TPE for Water, Antifreeze, and Fuel Transfer

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section - Eliminates air leaks for more efficient operation
Multiple Ports - Increased number of ports for installation flexibility
Optional Features - DataTrak (Runaway protection and tracks material usage), Pulse Output (Cycle count capability)
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
30% more efficient than the market leader
20% increase in fluid flow compared to the Husky 1040

Model: Husky
Series: 1050

Air Exhaust Port Size (in): 3/4
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: Acetal

Center Section Material: Aluminum

Compatible Material: Water, Antifreeze, Fuel

Connection Type: Threaded

Diaphragm Material: TPE (Hytrel)

Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 2.54
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum

For Use With: Water / anti-freeze / fuel transfer

Manifold O-Ring Material: None
Material: Aluminum

Maximum Air Consumption (SCFM): 25
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 280

Maximum Flow Rate (GPM): 50
Maximum Flow Rate (L/min): 189

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Operating Temperature ( degree C): 66
Maximum Operating Temperature ( degree F): 150

Maximum Solid Size (cm): 0.3175
Maximum Solid Size (in): 0.125
Maximum Solid Size (mm): 3.175

Overall Height (in): 15.9

Power Source: Air

$1,445.00

Husky Pump, 1050A-Pa01Aa2Ssptptpt

GG 647109

HUSKY PUMP, 1050A-PA01AA2SSPTPTPT

Graco 647109 Husky 1050 AL 1 in. (25.4 mm) BSPT Pump, Standard AL Center Section, SS Seats, PTFE Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Type: BSPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Type: BSPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 104
        Maximum Operating Temperature ( degree F): 220
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9
        Power Source: Air

$2,190.00

Husky Pump, 1050A-Pa01Aa1Acptpopt

GG 647076

HUSKY PUMP, 1050A-PA01AA1ACPTPOPT

Graco 647076 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, AC Seats, PTFE Balls & PO Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: PTFE
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE Overmold
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$2,260.00

Husky Pump, 1050A-Pa01Aa2Ssssptpt

GG 647099

HUSKY PUMP, 1050A-PA01AA2SSSSPTPT

Graco 647099 Husky 1050 AL 1 in. (25.4 mm) BSPT Pump, AL Center Section, SS Seats, SS Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Type: BSPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Type: BSPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 104
        Maximum Operating Temperature ( degree F): 220
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9
        Power Source: Air

$2,330.00

Husky Pump, 1050A-Pa01Ca1Sssspopt

GG 647346

HUSKY PUMP, 1050A-PA01CA1SSSSPOPT

Graco 647346 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, DataTrak AL Center Section, SS Seats, SS Balls & PO Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: 316 Stainless Steel
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE Overmold
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$0.00

Husky Pump, 1050A-Pa01Aa2Acacptpt

GG 647158

HUSKY PUMP, 1050A-PA01AA2ACACPTPT

Graco 647158 Husky 1050 AL 1 in. (25.4 mm) BSPT Pump, Standard AL Center Section, AC Seats, AC Balls & PTFE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Acetal
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: PTFE
        Diaphragm Material: PTFE/EPDM 2-Piece
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Type: BSPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Type: BSPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Power Source: Air

$2,040.00

Husky Pump, 1050A-Pa01Aa1Bnbnbn

GG 647669

HUSKY PUMP, 1050A-PA01AA1BNBNBN

Graco 647669 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, AL Center Section with BN Seals, BN Seats, BN Balls & BN Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Buna-N
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: Buna-N
        Diaphragm Material: Buna-N
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 82
        Maximum Operating Temperature ( degree F): 180
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9
        Power Source: Air

$1,755.00

Husky Pump, 1050A-A01Aa1Tpactp

GG 647666

HUSKY PUMP, 1050A-PA01AA1TPACTP

Graco 647666 Husky 1050 AL 1 in. (25.4 mm) NPT Pump, Standard AL Center Section, TPE Seats, AC Balls & TPE Diaphragm

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 1/2
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Acetal
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergents, Motor Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Transfer
        Connection Type: Threaded
        Diaphragm Compatible Material: TPE
        Diaphragm Material: TPE (Hytrel)
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: Center Port, End Port
        Material: Aluminum
        Maximum Air Consumption (SCFM): 67
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Operating Temperature ( degree C): 66
        Maximum Operating Temperature ( degree F): 150
        Maximum Solid Size (cm): 0.3175
        Maximum Solid Size (in): 0.125
        Maximum Solid Size (mm): 3.175
        Overall Height (in): 15.9
        Power Source: Air

$1,655.00

Husky Pump, 1050A-E, Bn/Bn/Bn/4A

GG 648007

HUSKY PUMP, 1050A-E, BN/BN/BN/4A

Graco 648007 Husky 1050e AL Pump, AL Center Section, BN Seats, BN Balls & BN Diaphragm

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

Durable Pump Technology
- Diaphragm Pump
  - Electric Drive
    - Patent Pending Air Charged Drive
      - Energy efficient electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
      - Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

$7,150.00

Husky Pump, 1050A-Pau3Aa1Bnactp

GG 647731

HUSKY PUMP, 1050A-PAU3AA1BNACTP

Graco 647731 Husky 1050 Series Air-Operated Double Diaphragm Transfer Pump for Oil Evacuation, Oil Transfer, BN/AC/TPE

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life - Up to 5x longer diaphragm life for less maintenance and downtime
Modular Air Valve - Stall-free, low pulsation operation provides smooth and rapid changeover
One-Piece Center Section - Eliminates air leaks for more efficient operation
Multiple Ports - Increased number of ports for installation flexibility
Optional Features - DataTrak (Runaway protection and tracks material usage), Pulse Output (Cycle count capability)
Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
30% more efficient than the market leader
20% increase in fluid flow compared to the Husky 1040

Model: Husky
Series: 1050

Air Exhaust Port Size (in): 3/4
Air Exhaust Port Thread Gender: Female
Air Exhaust Port Thread Type: NPT
Air Inlet Size (in): 1/2
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Industrial

Ball Material: Acetal

Center Section Material: Aluminum

Compatible Material: Oil, Water, Antifreeze

Connection Type: Threaded

Diaphragm Material: TPE (Hytrel)

Fluid Inlet Size (cm): 2.54
Fluid Inlet Size (in): 1
Fluid Inlet Size (mm): 25.4
Fluid Inlet Thread Gender: Female
Fluid Inlet Thread Type: NPT

Fluid Outlet Size (cm): 2.54
Fluid Outlet Size (in): 1
Fluid Outlet Size (mm): 25.4
Fluid Outlet Thread Gender: Female
Fluid Outlet Thread Type: NPT
Fluid Section Material: Aluminum

For Use With: Oil, Waste Oil

Manifold O-Ring Material: None
Material: Aluminum

Maximum Air Consumption (SCFM): 25
Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 280

Maximum Flow Rate (GPM): 50
Maximum Flow Rate (L/min): 189

Maximum Fluid Pressure (bar): 7
Maximum Fluid Pressure (kPa): 700
Maximum Fluid Pressure (MPa): 0.7
Maximum Fluid Pressure (psi): 100

Maximum Solid Size (cm): 0.3175
Maximum Solid Size (in): 0.125
Maximum Solid Size (mm): 3.175

Overall Height (in): 15.9

Power Source: Air

Pump Ratio: 1:1

$1,445.00

1050A Dia Pump, Aluminum, PTFE, PTFE

GG 647736

1050A Dia Pump, Aluminum, PTFE, PTFE

$0.00

Husky 1050 Diaphragm Pump, Drum Riser Tube with SST Seats & Check Balls

GG 647673

HUSKY PUMP, 1050A-PA01AA3SSSSPTPT

Graco 647673 Husky 1050 Diaphragm Pump: Drum Riser Tube with Stainless Steel Seats and Check Balls

The Husky 1050 air-operated diaphragm pump features a stall-free low pulsation air valve which provides a smooth and rapid changeover. The one-piece center section eliminates leaks and reduces maintenance on Husky pumps when compared to other diaphragm pumps.

Longer Diaphragm Life
- Modular Air Valve
  - One-Piece Center Section
    - Multiple Ports
      - Optional Features
        DataTrak - Runaway protection and tracks material usage
        Pulse Output - Cycle count capability
        Spring loaded, externally serviceable pilot valves for faster change over and reduced pulsation
        30% more efficient than the market leader
        20% increase in fluid flow compared to the Husky 1040
        
        Model: Husky
        Series: 1050
        Compatible Material: Antifreeze, Detergent, Motor Oil, Gear Oil, Hydraulic Fluid, Cutting Oil, Water - Wastewater Treatment, Water - Freshwater Treatment, Ink and Colorant
        Fluid Section Material: Aluminum
        For Use With: HFR Metering System
        Includes: Riser Tube
        Material: Carbon Steel
        Maximum Air Pressure (bar): 8.6
        Maximum Air Pressure (kPa): 860
        Maximum Air Pressure (MPa): 0.86
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 280
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Fluid Pressure (bar): 8.6
        Maximum Fluid Pressure (kPa): 860
        Maximum Fluid Pressure (MPa): 0.86
        Maximum Fluid Pressure (psi): 125
        Maximum Working Pressure (bar): 8.6
        Maximum Working Pressure (kPa): 86
        Maximum Working Pressure (MPa): 0.9
        Maximum Working Pressure (psi): 125
        Power Source: Air

$1,965.00

Kit, Replacement, Piston Rod, Pc

GG 24W617

KIT, REPLACEMENT, PISTON ROD, PC

Graco 24W617 ProConnect Replacement Rod Paint Sprayer Pump Kit for Pro210ES

Replace your pump rod with genuine Graco parts.Replacement part for rebuilding ProConnect pump. kit includes rod with installed piston valve. ProConnect pump is for Pro 210ES cart or stand model sprayers. Refer to the parts manual for your sprayer to ensure part compatibility

Application: Rod and piston are part of the sprayer pump for pumping fluid

Rod and piston are part of the sprayer pump for pumping fluid
Sprayer does not prime or spray, it may be from high pressure cuts, scratches and wear from not repacking the pump
Graco tech support can further assist with troubleshooting sprayer operation
Genuine Graco parts kit includes rod with installed piston valve

For Use With: Pro210ES Stand, Pro210ES Cart

$144.50

Kit, Replacement, Cylinder, Pc

GG 24W619

KIT, REPLACEMENT, CYLINDER, PC

Graco 24W619 Pump Cylinder

Airless Priston Pump Replacement Cylinder

Application: Gracos dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. Use Genuine Graco parts for the longest life, highest performance and best productivity.

Pump Cylinder

$164.50

Reservoir, 4 Pint, 118:1

GG 24W633

RESERVOIR, 4 PINT, 118:1, RH

Graco 24W633 Manzel MB118 Series Lubricator - 4 Pint (1.9 Liter) Reservoir (4 Pump Stations Max), No Pumps Installed, 118:1 drive on right hand end

Graco Manzel box lubricators - when quality and delivery matter! Made with Graco quality for long life and durability, the Manzel MB118 is the right size for triplex and quintuplex mud pump applications.

Application: MB118 is the right size for triplex and quintuplex mud pump applications.

Provide a proven, cost-effective way to assemble customized oil systems that meet specific requirements by using standard modular components
Increase opportunities to standardize lube system components and reduce lube maintenance and service costs
4 pint (1.9 liter) reservoir (4 pump stations max), no pumps installed, 118:1 drive on RH end

Model: Manzel
Series: MB

Cam Type: Single Lobe

Compatible Material: Oil

Drive Location: Right Hand Mount
Drive Option: Internal Gear Reduction

Lubricator Gear Ratio: 118:1

Maximum Drive Speed (RPM): 1800

Maximum Fluid Viscosity (SUS): 5000

Maximum Number of Pump Stations: 4
Maximum Number of Strokes (SPM): 15

Maximum Operating Temperature ( degree C): 60
Maximum Operating Temperature ( degree F): 140

Maximum Reservoir Capacity (gal): 0.5
Maximum Reservoir Capacity (L): 1.9

Maximum Reservoir Capacity (pt): 4
Maximum Reservoir Capacity (qt): 2

Maximum Working Pressure (bar): 517.1
Maximum Working Pressure (kPa): 51710
Maximum Working Pressure (psi): 7500

Minimum Fluid Viscosity (SUS): 80

Minimum Operating Temperature ( degree C): -29
Minimum Operating Temperature ( degree F): -20

Number of Pumps: 0

Overall Depth (cm): 36.2
Overall Depth (in): 14.25
Overall Depth (mm): 362

Overall Width (cm): 13.97
Overall Width (in): 5.5
Overall Width (mm): 139.7

$1,775.00

Husky Pump, 1050Hp, A01As1Ssspsspt

GG 24W758

HUSKY PUMP, 1050HP, A01AS1SSSPSSPT

Graco 24W758 Husky 1050HP 1 in. (25.4 mm) NPT SS Pump, AL Center Section, SS Seats, SP Balls & SP Diaphragm

The Husky 1050HP air-operated diaphragm pump is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco's low-high pressure mode valve. High pressure operation isn't always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features combined with the quality and reliability of our standard Husky diaphragm pump design make this one of the most unique high pressure diaphragm pumps on the market.

Benefits of the Husky 1050HP Double Diaphragm Pump
- External Pilots
  - Modular Air Valve
    - Additional Diaphragm
      - Low/High Pressure Operation Valve
        Selectable operating setting
        Reduces air consumption
        Only use high pressure when required
        Wetted Components
        Utilizes same parts as Husky 1050 which reduces repair part inventory
        
        Model: Husky
        Series: 1050HP
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 3/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Santoprene
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Polymer, Fibers, Alkyds, Resin, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Windshield Washer Fluid, Diesel Exhaust Fluid, Water, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Automotive Undercoating
        Connection Type: Threaded
        Diaphragm Compatible Material: Santoprene
        Diaphragm Material: Santoprene
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Stainless Steel
        Manifold Configuration: End Port
        Manifold O-Ring Material: PTFE
        Material: Stainless Steel
        Maximum Air Consumption (SCFM): 95
        Maximum Air Pressure (bar): 8.62
        Maximum Air Pressure (kPa): 862
        Maximum Air Pressure (MPa): 0.862
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 140
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 17.2
        Maximum Fluid Pressure (kPa):

$9,850.00

Husky Pump, 1050Hp, Sp/Sp/Sp/A

GG 24W762

HUSKY PUMP, 1050HP, SP/SP/SP/A

Graco 24W762 Husky 1050HP 1 in. (25.4 mm) NPT AL Pump, AL Center Section, SP Seats, SP Balls & SP Diaphragm

The Husky 1050HP air-operated diaphragm pump is the first pump on the market that allows users to choose between low pressure and high pressure operating modes with Graco's low-high pressure mode valve. High pressure operation isn't always required, so switch to the low pressure mode to reduce air consumption up to 50%. These features combined with the quality and reliability of our standard Husky diaphragm pump design make this one of the most unique high pressure diaphragm pumps on the market.

Benefits of the Husky 1050HP Double Diaphragm Pump
- External Pilots
  - Modular Air Valve
    - Additional Diaphragm
      - Low/High Pressure Operation Valve
        Selectable operating setting
        Reduces air consumption
        Only use high pressure when required
        Wetted Components
        Utilizes same parts as Husky 1050 which reduces repair part inventory
        
        Model: Husky
        Series: 1050HP
        Air Exhaust Port Size (in): 3/4
        Air Exhaust Port Thread Gender: Female
        Air Exhaust Port Thread Type: NPT
        Air Inlet Size (in): 3/4
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Application: Industrial
        Ball Material: Santoprene
        Center Section Material: Aluminum
        Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Polymer, Fibers, Alkyds, Resin, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Windshield Washer Fluid, Diesel Exhaust Fluid, Water, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Automotive Undercoating
        Connection Type: Threaded
        Diaphragm Compatible Material: Santoprene
        Diaphragm Material: Santoprene
        Fluid Inlet Size (cm): 2.54
        Fluid Inlet Size (in): 1
        Fluid Inlet Size (mm): 25.4
        Fluid Inlet Thread Gender: Female
        Fluid Inlet Thread Type: NPT
        Fluid Outlet Size (cm): 2.54
        Fluid Outlet Size (in): 1
        Fluid Outlet Size (mm): 25.4
        Fluid Outlet Thread Gender: Female
        Fluid Outlet Thread Type: NPT
        Fluid Section Material: Aluminum
        Manifold Configuration: End Port
        Manifold O-Ring Material: PTFE
        Material: Aluminum
        Maximum Air Consumption (SCFM): 95
        Maximum Air Pressure (bar): 8.62
        Maximum Air Pressure (kPa): 862
        Maximum Air Pressure (MPa): 0.862
        Maximum Air Pressure (psi): 125
        Maximum Cycle Rate (CPM): 140
        Maximum Flow Rate (GPM): 50
        Maximum Flow Rate (L/min): 189
        Maximum Fluid Pressure (bar): 17.2
        Maximum Fluid Pressure (kPa): 1720
        M

$5,220.00

Kit, Replacement, Adm, Tof

GG 24W812

Kit, Replacement, Adm, Tof

$3,410.00

Kit, Replacement, Hose, Cpld, Qd

GG 24W830

KIT, REPLACEMENT, HOSE, CPLD, QD

Graco 24W830 Hose Replacement Kit

Piston pump to filter manifold hose, 1/4QD

Application: Gracos dedication to delivering the highest quality products also allows you to protect your investment by offering products that can be repaired to ensure years of reliable service. Use Genuine Graco parts for the longest life, highest performance and best productivity.

Piston pump to filter manifold hose

$79.75

Kit, Spare Parts, Fusion, Ap

GG 24W849

Kit, Spare Parts, Fusion, Ap

$1,920.00

Ball Valve SST 1/4 NPT m/f

GG 24W863

Ball Valve SST 1/4 NPT m/f

$404.00

Overhaul Kit, Carbon Steel. GL33

GG 24W913

KIT, OVERHAUL, CS, GL-33

Graco 24W913 GL-33 and GL-42 Injectors and Accessories - GL33 Overhaul Kit, Carbon Steel

Application: For use with GL-33 and GL-42 Injectors.

GL33 overhaul kit, carbon steel

For Use With: GL-33 Grease Injectors

Includes: GL-33 Piston, Lubricant, Hardware

Kit Type: Overhaul Kit

Number of Pieces: 9

$13.50

Position Sensor Kit for E-Flo DC Motors

GG 24W920

Position Sensor Kit for E-Flo DC Motors

$110.00

GH130 Hydraulic Airless Sprayer

GG 24W923

GH 130 SPRAYER, STD

Graco 24W923 GH 130 Convertible Standard Series Gas Hydraulic Airless Sprayer

The GH 130 Convertible is the clear choice for entry level contractors who demand maximum power in a small package. With the ability to change out the pump lower and convert to electric power without tools, you can be assured that you have the most versatile sprayer on the market today.

Endurance Chromex Piston Pump
- Lasts 2X longer than the next leading brand
- QuikChange pump design allows you to swap the pump easily on the job
- Faster cleaning with the QuikAccess intake foot valve
High-Efficiency Hydraulic Motor
- Rock-solid performance time after time keeps you up and running
- Faster, more responsive changeover
- O-ring sealed fittings and form-fitted hydraulic lines prevent leaks
- Fewer moving parts mean less maintenance and longer life
High-Capacity Cooling System
- Innovative design allows the pump to run cooler and more efficiently
- Hydraulic reservoir is tapered on the bottom
- Provides easier and more thorough fluid changes
- Cooling fins on reservoir deflect heat away from sprayer
Easy Out Pump Filter
- Easy maintenance & less clogging
- Exclusive inside-out filter design won't collapse to ensure a quality finish
- Vertical design for less mess
Heavy-Duty Prime Valve
- Maintenance-free design withstands high-pressure dumping
Rugged, Durable Cart Design
- Thick chrome over welded steel withstands rugged environments
- Full pneumatic wheels absorb impacts and vibrations
- Retractable handle doubles as coiled hose storage
- Tilts on its nose for service in the field
Electric Motor Capability
- Indoor and outdoor use
- Quickly swap the gas engine for an electric motor in seconds - without tools
- Electric motor kit sold separately
Ready to Work
Includes everything you need to get spraying:
- Contractor Airless Spray Gun
- RAC X SwitchTips and Guard
- 50 feet of BlueMax II Airless Hose

Model: GH
Series: 130
Product Series: Standard

Compatible Electric Motor Kits: 288473, 288474 (CSA)
Compatible Material: Acrylics, Paint, Primer
Compatible Replacement Pump: 24B748

Convertible: Yes

Engine Brand: Honda
Engine Size (HP): 4

Features: Endurance Chromex Pump, High-Capacity Cooling System, Honda Engine, Easy Out Filter, Heavy-Duty Prime Valve, Durable Cart Design, Convertible

Fluid Inlet Size (in): 3/4
Fluid Inlet Size (mm): 19.05
Fluid Inlet Thread Type: MNPT

Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 3.75
Fluid Outlet Thread Type: FNPT

Frame Configuration: Cart

Includes: Contractor Gun, RAC X LP 517 Spray Tip, RAC X WideRAC 1231 Spray Tip, RAC X Guard, 1/4 in x 50 ft BlueMax II Airless Hose, TSL 4 oz

Maximum Flow Rate (GPM): 1.30
Maximum Flow Rate (L/min): 4.9

Maximum Hose Length (ft): 300
Maximum Hose Length (m): 92

Maximum Sound Pressure Level (dB(A)): 88

Maximum Tip Size (in): 0.037
Maximum Tip Size 1 Gun - Electric Motor (in): 0.031
Maximum Tip Size 2 Guns - Electric Motor (in): 0.017
Maximum Tip Size Gun 1 (in): 0.037
Maximum Tip Size Gun 2 (in): 0.023

Maximum Working Pressure (bar): 228
Maximum Working Pressure (kPa): 2

$8,510.00

Gh 230 Sprayer, Std

GG 24W929

GH 230 SPRAYER, STD

Graco 24W929 GH 230 Convertible Standard Series Gas Hydraulic Airless Sprayer

The GH 230 Convertible is the most versatile sprayer for the professional contractor looking for workhorse hydraulic performance for large commercial and residential construction jobs. Superior versatility with the ability to change out the pump lower and convert to electric power without tools.

Application: Graco GH Standard Series sprayers deliver durability and performance for spraying heavier materials in demanding applications. This sprayer is capable of handling elastomerics, block fillers, gypsum, and dry fall.

Endurance Chromex Piston Pump
Lasts 2X longer than the next leading brand
QuikChange pump design allows you to swap the pump easily on the job
Faster cleaning with the QuikAccess intake foot valve
High-Efficiency Hydraulic Motor
Rock-solid performance time after time keeps you up and running
Faster, more responsive changeover
O-ring sealed fittings and form-fitted hydraulic lines prevent leaks
Fewer moving parts mean less maintenance and longer life
High-Capacity Cooling System
Innovative design allows the pump to run cooler and more efficiently
Hydraulic reservoir is tapered on the bottom
Provides easier and more thorough fluid changes
Cooling fins on reservoir deflect heat away from sprayer
Easy Out Pump Filter
Easy maintenance & less clogging
Exclusive inside-out filter design wont collapse to ensure a quality finish
Vertical design for less mess
Heavy-Duty Prime Valve
Maintenance-free design withstands high-pressure dumping
Rugged, Durable Cart Design
Thick chrome over welded steel withstands rugged environments
Full pneumatic wheels absorb impacts and vibrations
Retractable handle doubles as coiled hose storage
Tilts on its nose for service in the field
Electric Motor Capability
Indoor and outdoor use
Quickly swap the gas engine for an electric motor in seconds - without tools
Electric motor kit sold separately
Ready to Work
Includes everything you need to get spraying:
Silver Plus Airless Spray Gun
RAC X SwitchTips and Guard
50 feet of BlueMax II Airless Hose

Model: GH
Series: 230
Product Series: Standard

Compatible Electric Motor Kits: 248949, 248950 (CSA)
Compatible Material: Acrylics, Dry Fall, Drywall Mud, Elastomer, Gypsum, Paint, Primer
Compatible Replacement Pump: 24W997

Convertible: Yes

Engine Brand: Honda
Engine Size (HP): 6.5

Features: Endurance Chromex Pump, High-Capacity Cooling System, Honda Engine, Easy Out Filter, Heavy-Duty Prime Valve, Durable Cart Design, Convertible

Fluid Inlet Size (in): 1-5/16
Fluid Inlet Size (mm): 33.34
Fluid Inlet Thread Type: UN-2A

Fluid Outlet Size (in): 3/8
Fluid Outlet Size (mm): 3.75
Fluid Outlet Thread Type: FNPT

Frame Configuration: Cart

Includes: Silver Plus Gun, RAC X LP 517 Spray Tip, RAC X WideRAC 1231 Spray Tip, RAC X Guard, 3/8 in x 50 ft BlueMax II Airless Hose, 1/4 in x 3 ft BlueMax II Airless Whip Hose, TSL 4 oz

Maximum Flow Rate (GPM): 2.35
Maximum Flow Rate (L/min): 8.9

Maximum Hose Length (ft): 300
Maximum Hose Length (m): <

$10,370.00

Kit, Bell Assembly Turbine

GG 24W988

KIT, BELL ASSY TURBINE

$11,300.00

KIT CABLE F/O XP REAR 25 FT

GG 24X003

KIT CABLE F/O XP REAR 25 FT

$229.50

Endura-Flo Pump, 4:1 AODD, 150, Bsp, Adv

GG 24W350

ENDURA-FLO PUMP, 4:1 AODD, 150, BSP, ADV

Graco 24W350 Endura-Flo 4D150, 4:1 Air Operated Diaphragm Pump, 150cc, BSPP, DataTrak

The Endura-Flo 4D offers the industry's highest-pressure ratio at 4:1. This easy to install pump is ideal for fluid transfer and supply, paint circulation, and piggable paint systems. Low pulsation output and smooth changeover for quick color changes ultimately save you time and money.

Endure-Flo diaphragms last longer against extreme operating conditions
Easy access to critical components for fast online maintenance
Pumps offer low pulsation output and smooth changeover for quick color changes, saving you time and money
Custom mounting options include rotatable fluid manifolds, mounting brackets and spring loaded check cartridges
DataTrek option prevents runaway and tracks material usage

Model: Endura-Flo
Series: 4D150

Air Inlet Size (in): 1/4
Air Inlet Thread Gender: Female
Air Inlet Thread Type: NPT

Application: Circulation

Compatible Material: High Solids, Xirallic, CARC, Metallics, Stains, Varnish, Fast-Set

Connection Type: Threaded

Fluid Inlet Size (cm): 1.27
Fluid Inlet Size (in): 1/2
Fluid Inlet Size (mm): 12.7
Fluid Inlet Thread Type: BSPP

Fluid Outlet Size (cm): 1.27
Fluid Outlet Size (in): 1/2
Fluid Outlet Size (mm): 12.7
Fluid Outlet Thread Type: BSPP

Includes: BSPP Fittings, DataTrak

Material: Stainless Steel

Maximum Air Pressure (bar): 7

Maximum Air Pressure (kPa): 700
Maximum Air Pressure (MPa): 0.7
Maximum Air Pressure (psi): 100

Maximum Cycle Rate (CPM): 20

Maximum Flow Rate (GPM): 2.4
Maximum Flow Rate (L/min): 9.1

Maximum Fluid Pressure (bar): 28
Maximum Fluid Pressure (kPa): 2800
Maximum Fluid Pressure (MPa): 2.8
Maximum Fluid Pressure (psi): 400

Maximum Operating Temperature ( degree C): 50
Maximum Operating Temperature ( degree F): 122

Minimum Operating Temperature ( degree C): 0
Minimum Operating Temperature ( degree F): 32

Power Source: Air

Pump Ratio: 4:1

$8,360.00

Kit, Air Control, TOF, 3REG, HYD

GG 24X026

Kit, Air Control, TOF, 3REG, HYD

$0.00

Kit, Cable, F/O, Xp Rear 50 Ft

GG 24X004

Kit, Cable, F/O, Xp Rear 50 Ft

$373.00

Quick Disconnect Solenoid Kit

GG 24X038

KIT, SOLENOID

Graco 24X038 Quick Disconnect Solenoid Kit

KIT INCLUDES: SOLENOID, QUICK DISCONNECT [QTY. 1], LUBRICANT, GREASE, 3GRAM [QTY. 1], FITTING, M6 PUSH-2-CON, M7 [QTY. 1], FITTING, TUBE, UNEQUAL 3/8 TO 1/4 [QTY. 1], TUBE, POLYURETHANE, RD [QTY. 1]

$564.00

Kit, Repair, Seals, T1

GG 24X055

Kit, Repair, Seals, T1

$177.00

Kit, Pressure, Sensor, Sanitary

GG 24X089

KIT, PRESSURE, SENSOR, SANITARY

$1,360.00

Seal Repair Kit, Upper and Lower, T2

GG 24X056

Seal Repair Kit, Upper and Lower, T2

$238.00

Kit, Valve, Air Motor

GG 24X156

Kit, Valve, Air Motor

$238.50

LSR (Liquid, Silicone, Rubber) F4-55 System, 55Gal/55Gal, Casters

GG 24X167

LSR F4-55 SYSTEM, 55GAL/55GAL, CASTERS

Graco 24X167 1:1 Ratio 55 gal (200 liter) F4 Fluid Automation System with Casters

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.

Application: Ideal for manufacturing in the following industries: medical, infant care, consumer products, automotive, industrial parts, wearables.

Precise ratio control, minimal material waste
- Easier operation with Graco Control Architecture
  - Better Color Control
    - Maintains Material Integrity
      - Cleanroom Convenience
        A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance
        
        Model: LSR
        Air Inlet Size (cm): 1.27
        Air Inlet Size (in): 1/2
        Air Inlet Size (mm): 12.7
        Air Inlet Thread Gender: Female
        Air Inlet Thread Type: NPT
        Amperage (A): 4
        Applicator Type: Automatic
        Frequency (Hz): 50/60
        Maximum Flow Rate (kg/min): 2.27
        Maximum Flow Rate (lb/min): 5
        Maximum Working Pressure (bar): 207
        Maximum Working Pressure (kPa): 20700
        Maximum Working Pressure (MPa): 21
        Maximum Working Pressure (psi): 3000
        Minimum Flow Rate (GPM): 10

$60,720.00