GRACO INC. S10595

GG 563214

SWIVEL, BALL 1/4 90

Graco 563214 90 degree Angle Swivel - 1/4 inch (6.4 mm)

• 90 degree Angle Swivel - 1/4 inch (6.4 mm)
• Lubriquip part number 509-405-000
• Trabon part number 9405

• Angle ( degree ): 90

• Connection Type: Threaded

GG 563215

SWIVEL, BALL 1/4 180

Graco 563215 180 degree Straight Swivel - 1/4 inch (6.4 mm)

• 180 degree Straight Swivel - 1/4 inch (6.4 mm)
• Lubriquip part number 509-406-000
• Trabon part number 9406

• Angle ( degree ): 180

• Connection Type: Threaded

• For Use With: Pipe

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

GG 563226

INDICATOR, RUPTURE 6400 PSI

Graco 563226 Trabon Replacement Rupture Indicator, 1/8-27 NPSF with O-Ring, 6400 psi (441 bar)

Used on MH divider valve applications where lube system pressures exceed 2,500 psi (172 bar).

• High pressure from blockage causes a disc to rupture
• Lubricant forces an indicator pin to protrude, indicating the blockage
• High pressure backs up through the system and trips a switch to shut the system off
• Lubriquip part number 509-499-165

• Model: Trabon

• Application: In-Plant Machinery, Compressor Equipment

• Compatible Material: Oil

• Connection Size (in): 0.125

• Indicator Type: Rupture Indicator

• Maximum Working Pressure (bar): 441
• Maximum Working Pressure (kPa): 44100
• Maximum Working Pressure (MPa): 44
• Maximum Working Pressure (psi): 6400

• Overall Length (cm): 4
• Overall Length (in): 1.77
• Overall Length (mm): 45
• Overall Width (cm): 1.4224
• Overall Width (in): 0.56
• Overall Width (mm): 14.224

GG 563212

SWIVEL, BALL 1/8 90

Graco 563212 90 degree Angle Swivel - 1/8 inch (3.2 mm)

• 90 degree Angle Swivel - 1/8 inch (3.2 mm)
• Lubriquip part number 509-400-000
• Trabon part number 9400

• Angle ( degree ): 90

• Connection Type: Threaded

GG 563223

INDICATOR, RELIEF 5500 PSI

Graco 563223 Trabon Replacement Rupture Indicator, 1/8-27 NPTF, 5500 psi (379 bar)

Trabon Performance Indicators are pressure-sensitive devices that pinpoint excessive pressure in Trabon series progressive lubricating systems. These devices, which are installed in the alternate outlet ports of divider valves, signal a fault either by causing an indicator pin to protrude or by releasing lubricant to the atmosphere. All Performance Indicators respond quickly to protect the lube system and locate lube line blockage.

• High pressure from blockage causes a disc to rupture.
• Lubricant forces an indicator pin to protrude, indicating the blockage.
• High pressure backs up through the system and trips a switch to shut the system off.
• Divider Valve Rupture Indicators w/Memory - 5,500 psi (379 bar)
• Lubriquip part number 509-499-140
• Trabon part number 9499-14

• Model: Trabon

• Application: In-Plant Machinery, Compressor Equipment

• Compatible Material: Oil

• Connection Size (in): 0.125

• Indicator Type: Rupture Indicator

• Maximum Working Pressure (bar): 379
• Maximum Working Pressure (kPa): 37900
• Maximum Working Pressure (MPa): 38
• Maximum Working Pressure (psi): 5500

• Overall Length (cm): 4
• Overall Length (in): 1.77
• Overall Length (mm): 45
• Overall Width (cm): 1.4224
• Overall Width (in): 0.56
• Overall Width (mm): 14.224

GG 563230

MHH VALVE, BALANCING, 1/8-27

Graco 563230 Balancing Valve, 1/8-27

• Lubriquip part number 509-510-000
• Trabon part number 9510

• Adjustable: Adjustable

• Compatible Material: Oil

• Inlet Size (cm): 0.3175
• Inlet Size (in): 1/8
• Inlet Size (mm): 3.175

• Inlet Thread Type: NPSF

• Material: Steel

• Maximum Working Pressure (bar): 448
• Maximum Working Pressure (kPa): 44800
• Maximum Working Pressure (MPa): 44.8
• Maximum Working Pressure (psi): 6500

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Type: NPSF

• Overall Height (cm): 3.81
• Overall Height (in): 1.5
• Overall Height (mm): 38.1
• Overall Length (cm): 10
• Overall Length (in): 3.834
• Overall Length (mm): 97
• Overall Width (cm): 2.54
• Overall Width (in): 1
• Overall Width (mm): 25.4

GG 563235

INDICATOR, MAN RESET 1500 PS MJ/MSP

Graco 563235 Reset Indicator with Memory, 1500 psi (103 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

• Provides quick troubleshooting tool with visual indication
• No tools for reset or parts to replace after indication
• Easy information on blocked lines, high system pressure or blocked bearings

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Oil, Grease

• Connection Size (in): 0.125

• Indicator Type: Reset Indicator with Memory

• Maximum Working Pressure (bar): 103
• Maximum Working Pressure (kPa): 10300
• Maximum Working Pressure (MPa): 10
• Maximum Working Pressure (psi): 1500

GG 563232

INDICATOR, MAN RESET 500 PS MJ/MSP

Graco 563232 Reset Indicator with Memory, 500 psi (35 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

• Provides quick troubleshooting tool with visual indication
• No tools for reset or parts to replace after indication
• Easy information on blocked lines, high system pressure or blocked bearings

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Oil, Grease

• Connection Size (in): 0.125

• Indicator Type: Reset Indicator with Memory

• Maximum Working Pressure (bar): 34
• Maximum Working Pressure (kPa): 3400
• Maximum Working Pressure (MPa): 3
• Maximum Working Pressure (psi): 500

GG 563237

INDICATOR, MAN RESET 2500 PS MJ/MSP

Graco 563237 Reset Indicator with Memory, 2500 psi (172 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

• Provides quick troubleshooting tool with visual indication
• No tools for reset or parts to replace after indication
• Easy information on blocked lines, high system pressure or blocked bearings

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Oil, Grease

• Connection Size (in): 0.125

• Indicator Type: Reset Indicator with Memory

• Maximum Working Pressure (bar): 172
• Maximum Working Pressure (kPa): 17200
• Maximum Working Pressure (MPa): 17
• Maximum Working Pressure (psi): 2500

GG 563234

INDICATOR, MAN RESET 1000 PS MJ/MSP

Graco 563234 Reset Indicator with Memory, 1000 psi (69 bar), 1/8 NPTF - MJ, MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

• Provides quick troubleshooting tool with visual indication
• No tools for reset or parts to replace after indication
• Easy information on blocked lines, high system pressure or blocked bearings

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Oil, Grease

• Connection Size (in): 0.125

• Indicator Type: Reset Indicator with Memory

• Maximum Working Pressure (bar): 69
• Maximum Working Pressure (kPa): 6900
• Maximum Working Pressure (MPa): 7
• Maximum Working Pressure (psi): 1000

GG 563251

INDICATOR, CYCLE

Graco 563251 MSP and MHH Divider Valves - Visual Cycle Indicator

The self-contained Visual Cycle Indicator is designed to allow for easy installation to Trabon MSP and Manzel MHH divider valves. The red indicator ring moves with the valve piston, allowing the user to visually determine the timing of each divider valve cycle.

• Makes physical contact with valve piston
• Polycarbonate housing allows for clear view of red indicator ring
• All parts are captured
• Replaces Lubriquip part number 509-932-522

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Compatible Material: Oil, Grease

• Indicator Type: Cycle Indicator

• Maximum Working Pressure (bar): 517.11
• Maximum Working Pressure (kPa): 51711
• Maximum Working Pressure (MPa): 51.7
• Maximum Working Pressure (psi): 7500

GG 563258

INDICATOR, MANUAL RESET, O-RING, 2500 PSI

Graco 563258 Reset Indicator with Memory, 2500 psi (172 bar), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

• Provides quick troubleshooting tool with visual indication
• No tools for reset or parts to replace after indication
• Easy information on blocked lines, high system pressure or blocked bearings

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Compatible Material: Oil, Grease

• Connection Size (in): 0.125

• For Use With: MSP, MXP, and MHH Divider Valves

• Indicator Type: Reset Indicator with Memory

• Maximum Working Pressure (bar): 172
• Maximum Working Pressure (kPa): 17200
• Maximum Working Pressure (MPa): 17
• Maximum Working Pressure (psi): 2500

GG 563326

SWITCH, SW BLOWOUT HI PRESS P3

Graco 563326 High Pressure Blowout Switch for 5.68 liter (12 pt.) and 9.46 liter (20 pt.) or 5.44 kg (12 lb.) and 9.06 kg (20 lb.) Reservoirs

• High Pressure Blowout Switch for 5.68 litre (12 pt.) and 9.46 litre (20 pt.) or 5.44 kg (12 lb.) and 9.06 kg (20 lb.) Reservoirs
• Lubriquip part number 521-001-200

• Model: Modu-Flo

• Compatible Material: Oil, Grease

• For Use With: Modu-Flo 12 and 20 pt (5.7 and 9.5 L) or 12 and 20 lb (5.4 and 9.1 kg) cylindrical reservoirs

• Maximum Working Pressure (bar): 100
• Maximum Working Pressure (kPa): 10000
• Maximum Working Pressure (MPa): 10
• Maximum Working Pressure (psi): 1450

GG 563257

INDICATOR, MANUAL RESET, O-RING, 2000 PSI

Graco 563257 Reset Indicator with Memory, 2000 psi (138 bar), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

• Provides quick troubleshooting tool with visual indication
• No tools for reset or parts to replace after indication
• Easy information on blocked lines, high system pressure or blocked bearings

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Compatible Material: Oil, Grease

• Connection Size (in): 0.125

• For Use With: MSP, MXP, and MHH Divider Valves

• Indicator Type: Reset Indicator with Memory

• Maximum Working Pressure (bar): 138
• Maximum Working Pressure (kPa): 13800
• Maximum Working Pressure (MPa): 14
• Maximum Working Pressure (psi): 2000

GG 563319

RESERVOIR, TANK 12PT T1

Graco 563319 12 pt. (5.67 liter) Rectangular Oil Reservoir - Metal

• 12 pt (5.67 liter) Rectangular - Metal
• Lubriquip part number 521-001-060

• Model: Trabon

• Application: Compressor Equipment

• Compatible Material: Oil

• Material: Metal

GG 563316

KIT, ACCESSORY, L/L, 5/12 PT

Graco 563316 Modu-Flo Low Level Switch Assemblies - 15 Amp Low Level Switch for 5 and 12 pt. Cylindrical Oil Reservoirs, SPDT

• 15 amp Low Level Switch for 5 and 12 pt Cylindrical Oil Reservoirs, SPDT
• Lubriquip part number 521-001-030

GG 563261

INDICATOR, RESET 3000 PSI 1/8 NPSF

Graco 563261 Reset Indicator with Memory, 3000 psi (207 bar), 1/8 NPSF with O-Ring - MH, MS, MXP Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

• Provides quick troubleshooting tool with visual indication
• No tools for reset or parts to replace after indication
• Easy information on blocked lines, high system pressure or blocked bearings

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Compatible Material: Oil, Grease

• Connection Size (in): 0.125

• Indicator Type: Reset Indicator with Memory

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 21
• Maximum Working Pressure (psi): 3000

GG 563327

SWITCH, BLOWOUT HI PRESS P4

Graco 563327 High Pressure Blowout Switch for all Rectangular Reservoirs

• High Pressure Blowout Switch for all Rectangular Reservoirs
• Lubriquip part number 521-001-210

• Model: Modu-Flo

• Compatible Material: Oil, Grease

• For Use With: Modu-Flo Tanks and Reservoirs

• Maximum Working Pressure (bar): 100
• Maximum Working Pressure (kPa): 10000
• Maximum Working Pressure (MPa): 10
• Maximum Working Pressure (psi): 1450

GG 563255

INDICATOR, MANUAL RESET, O-RING, 1000 PSI

Graco 563255 Reset Indicator with Memory, 1000 psi (69 bar), 1/8 NPSF with O-Ring for MSP, MXP, and MHH Divider Valves

Easy information on blocked lines, high system pressure or blocked bearings.

• Provides quick troubleshooting tool with visual indication
• No tools for reset or parts to replace after indication
• Easy information on blocked lines, high system pressure or blocked bearings

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Compatible Material: Oil, Grease

• Connection Size (in): 0.125

• For Use With: MSP, MXP, and MHH Divider Valves

• Indicator Type: Reset Indicator with Memory

• Maximum Working Pressure (bar): 69
• Maximum Working Pressure (kPa): 6900
• Maximum Working Pressure (MPa): 7
• Maximum Working Pressure (psi): 1000

GG 563275

SPRA VALVE, SPRAY 4 IN DIA

Graco 563275 Air-lube Control Valve and Nozzle Assembly - 4 in. spray diameter, normal

• Conserves air - air required only during spray interval
• Versatile - can be used with any centralized lube system or mechanical oiler and will handle grease or oil
• External mix nozzle purges itself and prevents clogging
• 4 in. spray diameter, normal
• Lubriquip part number 510-652-000
• Trabon part number 10652

• Compatible Material: Oil, Grease

• Maximum Air Pressure (bar): 11

• Maximum Air Pressure (kPa): 1100
• Maximum Air Pressure (psi): 150

• Maximum Fan Width (in): 4
• Maximum Fan Width (mm): 102

• Maximum NLGI Grade: #2

• Overall Width (cm): 2.54
• Overall Width (in): 1
• Overall Width (mm): 25.4

GG 563304

MODU-FLO PUMP, ASSEMBLY, AL-5M

Graco 563304 Modu-Flo AL-5M Pneumatic Pump without Reservoir

Mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

• Easy to standardize on components and reduce inventory
• Adjustable pump output for fast, convenient customizing
• Lubriquip part number 521-000-001

• Model: Modu-Flo
• Series: AL-5M

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease
• Compatible Metering Device: Series Progressive

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Cycle Rate (CPM): 30

• Maximum Fluid Output Pressure (bar): 241
• Maximum Fluid Output Pressure (psi): 3500

• Maximum Fluid Output Pressure (bar): 241
• Maximum Fluid Output Pressure (psi): 3500

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20680
• Maximum Working Pressure (MPa): 31
• Maximum Working Pressure (psi): 3000

• Overall Depth (cm): 5.4
• Overall Depth (in): 2.125
• Overall Depth (mm): 54

• Overall Height (cm): 6.7
• Overall Height (in): 2.26
• Overall Height (mm): 58
• Overall Width (cm): 21
• Overall Width (in): 8.281
• Overall Width (mm): 210

• Power Type: Pneumatic

GG 563287

BLOCK, END MACH MX

Graco 563287 Trabon MX Divider Valve - MX End

• MX end
• Lubriquip part number 510-921-004

• Model: Trabon
• Series: MX

• Application: In-Plant Machinery

GG 563308

MODU-FLO PUMP, ASSY, AL-50

Graco 563308 Modu-Flo AL-50 Pneumatic Pump without Reservoir

Mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

• Easy to standardize on components and reduce inventory
• Adjustable pump output for fast, convenient customizing
• Lubriquip part number 521-000-041

• Model: Modu-Flo
• Series: AL-50

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease
• Compatible Metering Device: Series Progressive

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Cycle Rate (CPM): 30

• Maximum Fluid Output Pressure (bar): 241
• Maximum Fluid Output Pressure (psi): 3500

• Maximum Fluid Output Pressure (bar): 241
• Maximum Fluid Output Pressure (psi): 3500

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20680
• Maximum Working Pressure (MPa): 31
• Maximum Working Pressure (psi): 3000

• Overall Depth (cm): 8.1
• Overall Depth (in): 3.188
• Overall Depth (mm): 81

• Overall Height (cm): 8.1
• Overall Height (in): 3.188
• Overall Height (mm): 81
• Overall Width (cm): 32.5
• Overall Width (in): 12.812
• Overall Width (mm): 325

• Power Type: Pneumatic

GG 563315

VALVE, SOL ASSY 3-WAY

Graco 563315 Trabon Accessories - 3-way pneumatic solenoid valve, 115 VAC

• 3-Way Pneumatic Solenoid Valve, 115 VAC
• Lubriquip part number 521-001-020

• Compatible Material: Oil, Grease

• Maximum NLGI Grade: #2

GG 563272

SWITCH, CYCLE, SPDT

Graco 563272 Cycle Switch (SPDT) and Bracket Assembly - MJ, MSP and MXP Divider Valves

Monitors piston movement to ensure completed lubrication cycle - must have cycle indicator pin

• Provides positive feedback based on actual metering piston movement
• Mounts to MJ, MSP, MXP, or MX divider with cycle pin option with simple install
• Able to be set for normally open or normally closed operation
• Trabon part number 10599

GG 563306

MODU-FLO PUMP, ASSY AL-25

Graco 563306 Modu-Flo AL-25 Pneumatic Pump without Reservoir

Mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines.

• Easy to standardize on components and reduce inventory
• Adjustable pump output for fast, convenient customizing
• Lubriquip part number 521-000-021

• Model: Modu-Flo
• Series: AL-25

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease
• Compatible Metering Device: Series Progressive

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Cycle Rate (CPM): 30

• Maximum Fluid Output Pressure (bar): 241
• Maximum Fluid Output Pressure (psi): 3500

• Maximum Fluid Output Pressure (bar): 241
• Maximum Fluid Output Pressure (psi): 3500

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20680
• Maximum Working Pressure (MPa): 31
• Maximum Working Pressure (psi): 3000

• Overall Depth (cm): 7.3
• Overall Depth (in): 2.875
• Overall Depth (mm): 73

• Overall Height (cm): 7.3
• Overall Height (in): 2.875
• Overall Height (mm): 73
• Overall Width (cm): 26.4
• Overall Width (in): 10.375
• Overall Width (mm): 264

• Power Type: Pneumatic

GG 563324

MANIFOLD, ASSY RESV TO PUMP

Graco 563324 Pump-to-Reservoir Manifold for Modu-Flo Pumps, NPT, Dry Gauge, Fill Check, Outlet Check, Blowout

• Pump/Reservoir Manifold (NPT) w/Outlet Check Valve, System Fill Check Valve, Blowout Assembly, 0-3,000 psi Pressure Gauge
• Lubriquip part number 521-001-180

• Model: Trabon

• Includes: Outlet Check Valve, System Fill Check Valve, Blowout Assembly, Pressure Gauge

GG 563322

SWITCH, LL GRS RESV

Graco 563322 Low Level Switch, 15 Amp, for all Grease Reservoirs

• Low Level Switch for 5, 6, 12 and 20 pt Cylindrical Grease Reservoirs
• Lubriquip part number 521-001-110

• Inlet Size (cm): 1.2700
• Inlet Size (in): 0.5
• Inlet Size (mm): 12.7000

• Inlet Thread Type: NPT

GG 563307

GG 563332

VALVE, SOL ASSY 24VDC

Graco 563332 Trabon Accessories - 3-way pneumatic solenoid valve, 24 VDC

• 3-Way, 24 VDC Solenoid Valve
• Lubriquip part number 521-002-100

• Compatible Material: Oil, Grease

• Maximum NLGI Grade: #2

GG 563318

KIT, ACCESSORY, L/L, 12/24/40 PT

Graco 563318 Modu-Flo Low Level Switch Assemblies - 15 Amp Low Level Switch for 6 pt. Cylindrical Oil Reservoirs and all Tank Reservoirs, SPDT

• 15 amp Low Level Switch for 6 pt Cylindrical Oil Reservoirs and all Tank Reservoirs, SPDT
• Lubriquip part number 521-001-050

• Inlet Size (cm): 1.2700
• Inlet Size (in): 0.5
• Inlet Size (mm): 12.7000

• Inlet Thread Type: NPSM

GG 563358

E-SERIES PUMP, 1/4NPSF

Graco 563358 E-Series Pump Only - with 1750 psi (121 bar) Rupture Disc

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

• Easy field installation of accessories without disturbing existing plumbing
• Smart pump design with few moving parts ensures long-lasting dependability
• Lubriquip part number 521-300-180

• Model: E-Series

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease
• Compatible Metering Device: Series Progressive

• Fluid Outlet Size (in): 0.5
• Fluid Outlet Size (mm): 12.7000
• Fluid Outlet Thread Type: NPSF

• Includes: E-Series Pump, Rupture Disc

• Material: Aluminum, Plastic

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum cST Grade (cST): 30000
• Maximum Cycle Rate (CPM): 10

• Maximum Fluid Output Pressure (bar): 138
• Maximum Fluid Output Pressure (psi): 2000

• Maximum Fluid Output Pressure (bar): 138
• Maximum Fluid Output Pressure (psi): 2000

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 137.9
• Maximum Working Pressure (kPa): 13790
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Power Type: Pneumatic

GG 563273

SWITCH, SUBMERSIBLE, SPDT

Graco 563273 Cycle Switch (SPDT) and Bracket Assembly, Moisture-Resistant - MJ, MS, MHH and MXP Divider Valves

Monitors piston movement to ensure completed lubrication cycle - must have cycle indicator pin

• Provides positive feedback based on actual metering piston movement
• Mounts to MJ, MSP, MXP, or MX divider with cycle pin option with simple install
• Able to be set for normally open or normally closed operation

GG 563360

E-SERIES PUMP, RESV ASSY GRS LL

Graco 563360 E-Series Pump and Reservoir Assembly - 5 lb (2.26 kg) Plastic Grease, 1/4 in. NPSF, Low Level Switch

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

• Easy field installation of accessories without disturbing existing plumbing
• Smart pump design with few moving parts ensures long-lasting dependability
• Lubriquip part number 521-300-360

• Model: E-Series

• Air Inlet Size (in): 0.2502
• Air Inlet Size (mm): 6.35

• Application: In-Plant Machinery

• Compatible Material: Grease

• Maximum Working Pressure (bar): 24
• Maximum Working Pressure (kPa): 2400
• Maximum Working Pressure (MPa): 2.4
• Maximum Working Pressure (psi): 350

• Power Type: Pneumatic

GG 563376

MAXI-FLO PUMP, 115 VAC REMOTE

Graco 563376 Maxi-Flo Electric Pump, 115 VAC, 4 pt. (1.89 liter) Plastic Rectangular Oil Reservoir, Remote Control

Compact design with everything you need to get your single line resistive oil lubrication system installed and running quickly. A standard package comes complete with reservoir, pump, gear motor, and choice of internal or remote control. Simple slide switches allow for easy setup of pump run cycle time. Bright LED indicators for low level and power allow for easy troubleshooting and verification.

• Integrated control with manual run button for easy setup
• Compact design fits anywhere
• 500 psi (34 bar) rating for using with various orifice metering devices

• Model: Maxi-Flo

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive

• Fluid Outlet Size (in): 0.125
• Fluid Outlet Size (mm): 3.1750
• Fluid Outlet Thread Type: NPSF

• Includes: 4 pt Plastic Rectangular Oil Reservoir, Remote Control

• Material: Plastic

• Maximum Flow Rate (ci/min): 0.12

• Maximum Fluid Output Pressure (bar): 34
• Maximum Fluid Output Pressure (psi): 500

• Maximum Fluid Output Pressure (bar): 34
• Maximum Fluid Output Pressure (psi): 500

• Maximum SUS Grade (SUS): 30000

• Maximum Working Pressure (bar): 34.5
• Maximum Working Pressure (kPa): 3450
• Maximum Working Pressure (MPa): 3.5
• Maximum Working Pressure (psi): 500

• Minimum SUS Grade (SUS): 60

• Overall Depth (cm): 16.4
• Overall Depth (in): 6.44
• Overall Depth (mm): 164

• Overall Height (cm): 24.1
• Overall Height (in): 9.5
• Overall Height (mm): 241

• Power Type: Electric

GG 563364

E-SERIES PUMP, RESV ASSY GRS LL

Graco 563364 E-Series Pump with 6 lb. (2.72 kg) Plastic Cylindrical Grease Reservoir, Low Level Switch with 2350 psi (162 bar) Rupture Disc

The E-Series pump is a great, minimum cost, entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include high-pressure rupture disc assembly and lube outlet check valve. Great for any application where price is a concern and installation time is at a premium.

• Easy field installation of accessories without disturbing existing plumbing
• Smart pump design with few moving parts ensures long-lasting dependability
• Lubriquip part number 521-300-670

• Model: E-Series

• Application: In-Plant Machinery

• Compatible Material: Grease
• Compatible Metering Device: Series Progressive

• Fluid Outlet Size (in): 0.5
• Fluid Outlet Size (mm): 12.7000
• Fluid Outlet Thread Type: NPSF

• Includes: E-Series Pump, Plastic Cylindrical Grease Reservoir, Low Level Switch, Rupture Disc

• Material: Aluminum, Plastic

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum cST Grade (cST): 30000
• Maximum Cycle Rate (CPM): 10

• Maximum Fluid Output Pressure (bar): 138
• Maximum Fluid Output Pressure (psi): 2000

• Maximum Fluid Output Pressure (bar): 138
• Maximum Fluid Output Pressure (psi): 2000

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 137.9
• Maximum Working Pressure (kPa): 13790
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

• Minimum Air Inlet Pressure (psi): 40

• Overall Depth (cm): 22.4
• Overall Depth (in): 8.81
• Overall Depth (mm): 224

• Overall Height (cm): 26.7
• Overall Height (in): 10.5
• Overall Height (mm): 267
• Overall Width (cm): 18.4
• Overall Width (in): 7.25
• Overall Width (mm): 184

• Power Type: Pneumatic

GG 563380

BODY, PUMP ASSY

Graco 563380 Lube Master Pump Body

• Bare Pump
• Lubriquip part number 521-700-000

• Model: Lube Master

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 340
• Maximum Working Pressure (kPa): 34000
• Maximum Working Pressure (MPa): 34
• Maximum Working Pressure (psi): 5000

GG 563383

CLUTCH, DRIVE

Graco 563383 Clutch drive with Ratchet Arm for Lube Master Pumps

• Clutch drive with ratchet arm
• Lubriquip part number 521-700-300

• For Use With: LubeMaster Electric Pumps

• Number of Pieces: 19

GG 563425

BLOCK, BASE, MSP/MHH, NPSF

Graco 563425 Trabon MSP Divider Valve - Intermediate Base Plate - NPSF

• Intermediate base plate
• NPSF
• Lubriquip part number 527-000-871

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Inlet Size (cm): 0.3175
• Inlet Size (in): 1/8
• Inlet Size (mm): 3.175

• Inlet Thread Type: NPSF

• Outlet Size (cm): 0.3175
• Outlet Size (in): 1/8
• Outlet Size (mm): 3.175
• Outlet Thread Type: NPSF

GG 563424

BLOCK, END, MSP/MHH

Graco 563424 Trabon MSP/Manzel MHH Divider Valve Standard End Section

• Standard end section (Must be ordered in multiples of five)
• Must be ordered in multiples of 5
• Lubriquip part number 527-000-851

• Model: Manzel
• Series: MHH

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Outlet Thread Type: NPSF

GG 563469

KIT, CROSSPORT, MSP, RH, CS

Graco 563469 Trabon MSP Divider Valve - Right Cross Port Bar

• Right Cross Port Bar - 1 outlet port plug is required for each cross port bar
• Lubriquip part number 527-005-320

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Material: Carbon Steel

GG 563470

KIT, CROSSPORT, MSP, LH, CS

Graco 563470 Trabon MSP Divider Valve - Left Cross Port Bar

• Left Cross Port Bar - 1 outlet port plug is required for each cross port bar
• Lubriquip part number 527-005-330

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Material: Carbon Steel

GG 563471

KIT, CROSSPORT, MSP, LH/RH, CS

Graco 563471 Trabon MSP Divider Valve - Right and Left Cross Port Bar

• Left and Right Cross Port Bar - 2 outlet port plugs are required for each double cross port bar
• Lubriquip part number 527-005-340

• Model: Trabon
• Series: MSP

• Application: On-Road Vehicles, Off-Road Equipment, Compressor Equipment

• Material: Carbon Steel

GG 563486

SWITCH, PROX MXP 3-PIN W/ IND

Graco 563486 Field Sensitive Mechanical Proximity Cycle, 20-32 VDC, 3-Pin - MXP, MX and MXO Divider Valves

Magnetically-operated sensing devices for sending system data to the controller or PLC.

• Available in 115 VAC or 12-32 VDC
• Available for all series progressive families to provide cycle rates up to 200 CPM
• Pressure ratings up to 10,000 psi (690 bar)
• Select models available with UL and CSA approvals
• Lubriquip part number 527-006-130

• Compatible Material: Oil, Grease

• Material: 303 Stainless Steel, Viton

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 52
• Maximum Working Pressure (psi): 7500

• Power Connection Type: 3-Pin BH Mini

GG 563507

FILTER, 138 MICRON INLINE 1/4 NPT

Graco 563507 In-Line Oil and Grease Strainers - High Pressure, 7500 psi, 1/4-18 NPTF, 149 Micron

• 149 micron, 100 Mesh In-Line Block Strainer (NPT)
• Lubriquip part number 527-100-380

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 5170
• Maximum Working Pressure (psi): 7500

• Port Size (cm): 0.635
• Port Size (in): 1/4
• Port Size (mm): 6.35

GG 563509

FILTER, 10 MICRON PLUG END

Graco 563509 End Plug Filter Assembly with 10 micron Filter Element, Lubriquip part number 527-100-540

• 10 micron Replacement Filter Element for Graco part numbers 563511, 563513, 563516
• Replacement filter element for Lubriquip part numbers 527-100-230, 527-100-580, 527-100-581, 527-100-780, 527-101-120, 527-101-223

• For Use With: In-Line Oil Filters

GG 563511

FILTER, 10 MICRON INLINE 1/4 NPT

Graco 563511 In-Line Oil Filters - High Pressure, 7500 psi, 1/4-18 NPTF, 10 Micron

• Lubriquip part number 527-100-581
• Direct replacement for Lubriquip part number 527-100-230, 527-100-480, 527-100-580
• Replacement element is Graco part number 563509

• Application: Compressor Equipment

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 5170
• Maximum Working Pressure (psi): 7500

• Port Size (cm): 0.635
• Port Size (in): 1/4
• Port Size (mm): 6.35

GG 563510

FILTER, 25 MICRON PLUG END

Graco 563510 End Plug Filter Assembly with 25 micron Filter Element, Lubriquip part number 527-100-550

• 25 micron Replacement Filter Element for Graco part numbers 563512, 563514, 563515
• Replacement filter element for Lubriquip part numbers 527-100-240, 527-100-590 527-100-591, 527-100-790, 527-100-830, 527-101-224

• For Use With: In-Line Oil Filters

GG 563512

FILTER, 25 MICRON INLINE 1/4 NPT

Graco 563512 In-Line Oil Filters - High Pressure, 7500 psi, 1/4-18 NPTF, 25 Micron

• 25 micron In-Line Oil Filter, NPT
• Lubriquip part number 527-100-591
• Direct replacement for Lubriquip part number 527-100-240 and 527-100-590

• Application: Compressor Equipment

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 5170
• Maximum Working Pressure (psi): 7500

• Port Size (cm): 0.635
• Port Size (in): 1/4
• Port Size (mm): 6.35

GG 563518

BLOCK, SECT END ASSY MXP

Graco 563518 Trabon MXP Divider Valve - End Section

• End section
• Lubriquip part number 527-300-090

• Model: Trabon
• Series: MXP

• Application: In-Plant Machinery

GG 563579

LUBRISYSTEM PUMP, AIR (NO RES)

Graco 563579 LubriSystem Standard Air Operated Pump without Reservoir

Easy to design, modify and adjust for oil or grease applications large or small. Great for operation of piston distributors. Rugged construction maximizes your productivity - upgrading to the internal timer control completely automates the system. All packages include internal pressure relief, so no need to install extra parts with additional costs. Combine with LubriSystem injectors for easy, low cost system design solutions.

• Ability to serve large systems - up to 100 lube points or more
• Efficient design promotes increased productivity and less downtime
• No reservoir included

• Model: LubriSystem

• Application: In-Plant Machinery

• Compatible Material: Oil, Grease
• Compatible Metering Device: Single Line Parallel

• Includes: Standard Pump

• Maximum Air Inlet Pressure (bar): 10.34
• Maximum Air Inlet Pressure (kPa): 1034
• Maximum Air Inlet Pressure (psi): 150

• Maximum Fluid Output Pressure (bar): 93
• Maximum Fluid Output Pressure (psi): 1350

• Maximum Fluid Output Pressure (bar): 93
• Maximum Fluid Output Pressure (psi): 1350

• Maximum NLGI Grade: #1

• Maximum Working Pressure (bar): 40
• Maximum Working Pressure (kPa): 4000
• Maximum Working Pressure (MPa): 4
• Maximum Working Pressure (psi): 580

• Minimum Air Inlet Pressure (psi): 40

• Power Type: Pneumatic

GG 563519

BLOCK, BSPLT INTERM MXP 1/4 NPSF

Graco 563519 Trabon MXP Divider Valve - Intermediate Base Plate - NPSF

• Intermediate Base
• Must be ordered in multiples of 2
• 1/4-18 NPSF

• Model: Trabon
• Series: MXP

• Application: In-Plant Machinery

• Inlet Size (cm): 0.635
• Inlet Size (in): 1/4
• Inlet Size (mm): 6.35

• Inlet Thread Type: NPSF

• Outlet Size (cm): 0.635
• Outlet Size (in): 1/4
• Outlet Size (mm): 6.35
• Outlet Thread Type: NPSF

GG 563580

LUBRISYSTEM PUMP, HAND

Graco 563580 LubriSystem Hand-Operated Pump - Pump Body without Reservoir

Sturdy construction of aluminum and steel to provide years of service. Compact design can be used in areas where space is limited. Rugged bracket allows the pump package to be mounted in place in any application.

• General machinery lubrication where power is limited or not available
• Bracket-mount design for easy installation
• Rugged design for years of operation
• Lubriquip part number 550-000-520

• Model: LubriSystem

• Application: In-Plant Machinery, Compressor Equipment

• Compatible Material: Oil, Grease

• Includes: Hand Pump Body

• Maximum NLGI Grade: #1

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (psi): 3000

GG 563796

GG 563799

TUBE, 2 BUNDLE 15FT PRECHARGE

Graco 563799 15 ft. Pre-Charged Tube - 2 Tube Bundle, 3/16 in. OD - Orange, Black

• Lubriquip part number 550-450-989

• Application: On-Road Vehicles

• Color: Black, Orange

• Compatible Material: Grease

• Material: Nylon

• Maximum Working Pressure (bar): 56
• Maximum Working Pressure (kPa): 560
• Maximum Working Pressure (psi): 800

• Overall Length (ft): 15
• Overall Length (m): 5

GG 563902

KIT, REPAIR PUMP AL-5M

Graco 563902 Modu-Flo Pump Assembly Repair Kits - AL-5, Single or Double Acting Repair Kit

• AL-5M seal kit
• Lubriquip part number 560-001-021

• For Use With: AL-5M Pumps

• Includes: Piston Spring, Check Valve Spring, Check Valve Seat, Hardware

• Kit Type: Repair Kit

GG 563800

TUBE, 3 BUNDLE 10FT PRECHARGE

Graco 563800 10 ft. Pre-Charged Tube - 3 Tube Bundle, 3/16 in. OD - Blue, Orange, Black

• Lubriquip part number 550-450-990

• Application: On-Road Vehicles

• Color: Black, Orange, Blue

• Compatible Material: Grease

• Material: Nylon

• Maximum Working Pressure (bar): 56
• Maximum Working Pressure (kPa): 560
• Maximum Working Pressure (psi): 800

• Overall Length (ft): 10
• Overall Length (m): 3

GG 563903

KIT, REPAIR PUMP AL-25M

Graco 563903 Modu-Flo Pump Assembly Repair Kits - AL-25, Single or Double Acting Repair Kit

• AL-25M seal kit
• Lubriquip part number 560-001-031

• For Use With: AL-25M Pumps

• Includes: Piston Spring Retainer, Check Valve Spring, Check Valve Seat, Hardware

• Kit Type: Repair Kit

GG 563906

KIT, REPAIR PUMP HL-25M

Graco 563906 HL-25M Seal Kit

• HL-25M seal kit
• Lubriquip part number 560-001-061

• For Use With: HL-25M Pumps

• Includes: Check Valve Spring, Check Valve Seat, Hardware

• Kit Type: Repair Kit

GG 563918

GG 563909

KIT, REPAIR PUMP E-SERIES

Graco 563909 E-Series Pump Repair Kit (Fixed Output)

• Pump Repair Kit (fixed output)
• Lubriquip part number 560-001-210

• For Use With: E-Series Pumps

• Includes: Check Valve Spring, Check Valve Seat, O-Rings, Hardware

• Kit Type: Repair Kit

GG 563923

GG 563928

KIT, REPAIRI ND CYCLE MSP

Graco 563928 Trabon MSP Mounting Accessories and Spare Parts - MSP Cycle Pin Indicator Repair Kit, Gasket

• MSP cycle pin indicator repair kit, gasket
• Lubriquip part number 560-002-050

• Includes: MX Cycle Indicator, MX Cycle Indicator Stem, Hardware

GG 563929

KIT, REPAIR IND CYC

Graco 563929 Trabon MSP Mounting Accessories and Spare Parts - MSP Cycle Pin Indicator Repair Kit, O-Ring

• MSP cycle pin indicator repair kit, O-ring
• Lubriquip part number 560-002-055

• Includes: MX Cycle Indicator Stem, Hardware

GG 563962

KIT, B/O DISC 1450 PS1 YELLOW

Graco 563962 Blowout Disc Kit - (6) Yellow, 1450 psi, 11/16 in.

• Used in conjunction with system pressure switch - can warn of a fault while allowing lube system to continue to deliver to critical bearings.
• Requires replacement of the rupture disc to restart the lube system.
• Easy information on blocked lines, high system pressure or blocked bearings.
• 1,450 psi - yellow
• Lubriquip part number 560-900-270

• Color: Yellow

• Maximum Working Pressure (bar): 100
• Maximum Working Pressure (kPa): 9991
• Maximum Working Pressure (MPa): 10
• Maximum Working Pressure (psi): 1450

• Number of Pieces: 6

• Overall Diameter (cm): 1.7
• Overall Diameter (in): 0.688

• Overall Diameter (mm): 17

GG 563963

KIT, B/O DISC 1750 RED

Graco 563963 Blowout Disc Kit - (6) Red, 1750 psi, 11/16 in.

• Used in conjunction with system pressure switch - can warn of a fault while allowing lube system to continue to deliver to critical bearings.
• Requires replacement of the rupture disc to restart the lube system.
• Easy information on blocked lines, high system pressure or blocked bearings.
• 1,750 psi - red
• Lubriquip part number 560-900-280

• Color: Red

• Maximum Working Pressure (bar): 121
• Maximum Working Pressure (kPa): 12058
• Maximum Working Pressure (MPa): 12.1
• Maximum Working Pressure (psi): 1750

• Number of Pieces: 6

• Overall Diameter (cm): 1.7
• Overall Diameter (in): 0.688

• Overall Diameter (mm): 17

GG 563966

KIT, B/O DISC 2950 BLUE

Graco 563966 Blowout Disc Kit - (6) Blue, 2950 psi, 11/16 in.

• Used in conjunction with system pressure switch - can warn of a fault while allowing lube system to continue to deliver to critical bearings.
• Requires replacement of the rupture disc to restart the lube system.
• Easy information on blocked lines, high system pressure or blocked bearings.
• 2,940 psi - blue
• Lubriquip part number 560-900-320

• Color: Blue

• Maximum Working Pressure (bar): 203
• Maximum Working Pressure (kPa): 20326
• Maximum Working Pressure (MPa): 20.3
• Maximum Working Pressure (psi): 2950

• Number of Pieces: 6

• Overall Diameter (cm): 1.7
• Overall Diameter (in): 0.688

• Overall Diameter (mm): 17

GG 564086

GG 564350

SWIVEL, BEARING, 90DEG, 1/2 NPT

Graco 564350 Ball Bearing 90 degree Angle Swivel - 1/2 inch (12.7 mm)

• 90 degree Angle Swivel - 1/2 inch (12.7 mm)
• Lubriquip part number 503-706-001

• Angle ( degree ): 90

• Connection Type: Threaded

• For Use With: Pipe

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

GG 567251

GG 564406

FILTER, 138 MIC INLINE 1/4-19 BSPP

Graco 564406 General Accessories - In-Line Oil/Grease Filters (High-Pressure) - 149 Micron, 100 Mesh In-Line Block Strainer, BSPP

• 149 micron, 100 Mesh In-Line Block Strainer, BSPP (ISO 1179)
• Lubriquip part number 527-101-130

• Maximum Working Pressure (bar): 517
• Maximum Working Pressure (kPa): 51700
• Maximum Working Pressure (MPa): 5170
• Maximum Working Pressure (psi): 7500

• Port Size (cm): 0.635
• Port Size (in): 1/4
• Port Size (mm): 6.35

GG 564413

MINI METER-FLO PUMP, MOTOR ASSY 5CU/IN

Graco 564413 Miniature Meter-Flo Assembly - Pump, Gear motor, Reducer Assembly, 5 cu in/min (82 cc/min)

Designed for use with virtually any type of Series Progressive or Single Line Resistive oil lubrication system. The Miniature Meter-Flo has a rugged steel reservoir and motor assembly withstands the toughest applications.

• Capable of high volumetric output operating continuously at pressures up to 1,000 psi (69 bar)
• Compact with several options to create a complete system using feedback and control
• Nominal displacements of 5 cu. in./min. (82 cc/mm.)
• Pump, Gear motor and Reducer assembly - no reservoir
• Reservoir has a suction line strainer, return line port, visual level gauge, pressure gauge and filler/strainer with spring return cap
• Options include low level switch, high pressure indicator, and lube cycle timer
• Lubriquip part number 540-800-620

• Model: Miniature Meter-Flo

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• For Use With: Series Progressive Oil Lubrication Systems, Single Line Resistive Oil Lubrication Systems

• Includes: Pump, Gear Motor, Reducer Assembly

• Material: Metal

• Maximum cST Grade (cST): 15000

• Maximum Flow Rate (ci/min): 5

• Maximum Working Pressure (bar): 69
• Maximum Working Pressure (kPa): 6900
• Maximum Working Pressure (MPa): 6.9
• Maximum Working Pressure (psi): 1000

• Minimum cST Grade (cST): 160

• Minimum Voltage (V ac): 103.5

• Power Connection Type: 3 Wire Hook-Up Inside Junction Box

• Power Type: Electric

GG 570267

GG 570268

KIT, REBUILT POLYMITE

Graco 570268 1K Ultra-Lite Valve Rebuild Kit

KIT INCLUDES: PACKING, O-RING [QTY. 1], PACKING, O-RING [QTY. 1], PACKING, O-RING [QTY. 2], PACKING, O-RING, BUNA-N [QTY. 1], GASKET, SEAT [QTY. 1], SEAT, VALVE [QTY. 1], BEARING, SLEEVE 1/4, 3/8, 1/4NYL [QTY. 2], LUBRICANT, SYNTHETIC, GREASE, 3 OZ [QTY. 1], SEAL, U-CUP POLYMT 1/4, 1/2, 1/4 [QTY. 1], PACKING, U-CUP URT 1/4, 1/2, 1/8 UR [QTY. 1], PIN, DOWEL [QTY. 1], GASKET, AIR MANIFOLD [QTY. 1], INSERT, SUFF-BACK, 2K2 [QTY. 1], NEEDLE, 2K2 SST HARDENED [QTY. 1], BEARING, LUBE 2K2 [QTY. 1], PACKING, O-RING [QTY. 2]

GG 571028

KIT, ACC, ADJ PRESSURE RELIEF

Graco 571028 Adjustable Return-to-Reservoir Pressure Relief Kit - 500-3500 psi (35-241 bar) - 1/4" NPT

• Adjustable Return-to-Reservoir Pressure Relief Kit - 500-3500 psi (35-241 bar)

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Oil, Grease

• For Use With: G1 Pumps, G3 Pumps, Pressure Relief Valve

• Includes: Pressure Relief Valve, Fittings, Hardware, Tube

GG 571033

KIT, REMOTE MAN RUN, 24V, W/CABLE

Graco 571033 G-Series Pump Accessory - Remote manual monitoring light run kit - 24 VDC, 90-240 VAC, includes 16 foot M12 cable

• Remote manual monitoring light run kit - 24 VDC, 90-240 VAC, includes 16 foot M12 cable

• For Use With: G-Series Pumps

• Includes: Remote manual run/monitoring light, 16 foot M12 Cable

• Number of Pieces: 2

GG 571041

KIT, ACC, PUMP ELEMENT

Graco 571041 G-Series Pump Accessories - G3 Pump Element

• G3 pump element - the same adjustability as the pump included with G3

• For Use With: G3 Pumps

• Includes: Pump Element, Spacer

• Kit Type: Repair Kit

GG 598141

GG 571167

ADAPTER, OUTLET TO HAND PUMP

Graco 571167 Pump Outlet Adapter

• Includes: Adapter Fitting, O-Ring

GG 5-729-300-2.5LM

GG 575206

XP SYSTEM, 2:1, 180/90, COMPLETE, HAZ

Graco 575206 XP50 Cart System, Hazardous Location, 2:1 With Primary Heaters & Hose Heat, 240V

Two-component spraying made easy and affordable. Graco XP50 Plural-Component Sprayers are designed to pump, mix and atomize medium to high solid coatings with superior results. When you upgrade from hand mixing, you'll find that the XP provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate - choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That's because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

• Reduced material waste
• No more throwing away unused mixed material at the end of the day
• Save money by using less clean-up solvent
• Easy to operate - minimal training required
• Reduced maintenance costs
• Rated for 5000 psi (345 bar) to handle viscous materials and long hose lengths

• Series: XP50

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coating, Primer, Epoxy, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: With Primary Heaters & Hose Heat

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: 7 Gallon Hoppers, XTR+ Gun, 35 ft integration Hose and Static Mixer, Merkur Flush Pump, Viscon HP Heaters, Hose Heat Circulation Kit, Remote Carriage, PressureTrak

• Location Category: Hazardous Location

• Material Application: Coatings, Paints, Primers

• Maximum Air Consumption (SCFM): 60 scfm/gpm at 100 psi
• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (MPa): 1.21
• Maximum Air Inlet Pressure (psi): 175

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 10970

• Maximum Flow Rate (GPM): 2.9
• Maximum Flow Rate (L/min): 10.97

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Spray Pressure (bar): 344

• Maximum Spray Pressure (kPa): 34400
• Maximum Spray Pressure (MPa): 34
• Maximum Spray Pressure (psi): 5000

• Maximum Working Pressure (bar): 331
• Maximum Working Pressure (kPa): 33100
• Maximum Working Pressure (MPa): 33
• Maximum Working Pressure (psi): 4800
• Measurin

GG 598140

GG 60/0111-1/50

GG 571102

XP SYSTEM, 1:1, 90/90, BF, CH

Graco 571102 XP70 Hazardous Location Spray Package, Cart, 1:1 Mix Ratio, Hopper, XTR Gun

The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high-viscosity, high-solids coatings with superior results. In addition, the XP70's design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, youll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent.

• Reduced material waste
• No more throwing away unused mixed material at the end of the day
• Save money by using less clean-up solvent
• Easy to operate - minimal training required
• Reduced maintenance costs
• Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

• Series: XP70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coatings, Primer, Epoxies, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Cart Mount with 7 gallon (26.5 Liter) Hopper

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: XTR Spray Gun, Fluid Hose, NXT Air Motor

• Material Application: Coatings, Paints, Primers

• Maximum Air Consumption (SCFM): 75 scfm/gpm at 100 psi
• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (MPa): 1.21
• Maximum Air Inlet Pressure (psi): 175

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 7200

• Maximum Flow Rate (GPM): 1.9
• Maximum Flow Rate (L/min): 7.2

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250
• Measuring Type: Fixed Mechanical Positive Displacement

• Minimum Fluid Viscosity (cP): 200

• Mix Accuracy (%): +/- 5
• Mix Ratio: 1:1

• Number of Catalysts: 1

• Number of Reducers: 0

• Number of Resin Colors: 1
• Number of Tanks: 2

• Ov

GG 60/0116-1/50

GG 576205

XP SYSTEM, 2:1, 115/58, BF, CH, HS, JB

Graco 576205 XP70 Non-Hazardous Spray Package, Cart, 2:1 Mix Ratio, Hopper, Solvent Pump, Heaters, Junction Box, XTR Gun, 240V

Two-component spraying made easy and affordable. The Graco XP70 Plural-Component Sprayer is designed to pump, mix and atomize high to 100% solid coatings with superior results. In addition, the XP70's design allows you to gravity feed, which may eliminate the need for feed pumps, saving you money. When you upgrade from hand mixing, youll find that the XP70 provides excellent return on investment, by reducing material waste and by using less clean-up solvent. Flexible options for mix ratio, pressure and flow rate - choose the right system for the application. If you occasionally change materials, the Graco XP Sprayers are the right choice. That's because you can change the ratio by simply changing out one or two pump lowers. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1 mix ratios.

• Reduced material waste
• No more throwing away unused mixed material at the end of the day
• Save money by using less clean-up solvent
• Easy to operate - minimal training required
• Reduced maintenance costs
• Rated for 7250 psi (500 bar, 50 MPa) to handle viscous materials and long hose lengths

• Series: XP70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPSM

• Applicator Type: Automatic Airless, Manual Airless

• Compatible Material: Protective Coatings, Primer, Epoxies, Polyurethane, Two-Component Coating, Solvents

• Component Type: Plural-Component
• Configuration: Cart Mount with 7 gallon (26.5 Liter) Hopper

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPSM

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Flush Type: Solvent

• Hose Length (ft): 35
• Hose Length (m): 10.7

• Includes: Heaters, Solvent Flush Pump, Hoppers

• Material Application: Coatings, Paints, Primers

• Maximum Air Consumption (SCFM): 75 scfm/gpm at 100 psi
• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (MPa): 1.21
• Maximum Air Inlet Pressure (psi): 175

• Maximum Cycle Rate (CPM): 40

• Maximum Flow Rate (cc/min): 6800

• Maximum Flow Rate (GPM): 1.8
• Maximum Flow Rate (L/min): 6.8

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Hose Length (ft): 300
• Maximum Hose Length (m): 91.4

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Spray Pressure (bar): 500

• Maximum Spray Pressure (kPa): 50000
• Maximum Spray Pressure (MPa): 50
• Maximum Spray Pressure (psi): 7250

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi):

GG 571042

KIT, REPAIR, 2L RESERVOIR, G3

Graco 571042 G-Series Repair Kit - 2L Reservoir

• Repair kit 2L reservoir with wiper arm

• Includes: Wiper Arm

GG 571170

VALVE, VENT 24VDC N.C. NPT

Graco 571170 Direct-Mount Vent Valves for G3 Pumps - NPT, 24 VDC, 500-3500 psi (35-241 bar), Normally Closed, RH

Industry leading feature for your lube system needs.

• Easily mounts to your G3 pump.
• Eliminates time and material costs associated with remote mounted vent valves.
• 24 VDC
• The normally closed valve works with the G3 Max pumps controller, and vents pressure based on the time duration you program into the G3 control.
• Adjustable pressure relief is integrated into the valve, no need to purchase an additional relief valve.
• Deutsch Power Connection

• Model: Trabon

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Oil, Grease

• For Use With: G3 Pumps

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 5
• Maximum Flow Rate (L/min): 19

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24
• Maximum Working Pressure (psi): 3500

• Outlet Thread Type: NPT

GG 577005

GG 571183

KIT, REPAIR, RESERVOIR, GRS 4L

Graco 571183 G-Series Repair Kit - 4L Reservoir

• Reservoir Repair Kit - for 4 Liter Grease models

• For Use With: G1 Pumps, G3 Pumps

• Includes: Reservoir, Hardware

• Kit Type: Repair Kit

GG 571058

KIT, ACCESSORY, OUTPUT ADAPTER

Graco 571058 G-Series Pump Accessories - Pressure Relief-to-Atmosphere Kit (Requires Pressure Relief Valve)

• Pressure relief-to-atmosphere kit - requires one of the following six pressure relief valves: 563156, 563157, 563158, 563159, 563160, 563161

• For Use With: G1 Pumps, G3 Pumps

• Includes: Fittings, Hardware

• Kit Type: Repair Kit

GG 60/0137/89

GG 60/0008/83

GG 60/0201/50

MIXER,ASSY,3/8X36EL

Graco 60/0201/50 3/8 in x 36 Mixer

GG 60/0204/50

GG 60/0200/50

MIXER, ASSY, 3/8X24EL

Graco 60/0200/50 3/8 in x 24 Mixer

• For Use With: PR70 and PR70v Two Component Liquid Dispensing Systems

• Includes: 3/8 x 24 Mixer Element, Mixer Housing

• Inside Diameter (cm): 0.9525
• Inside Diameter (in): 0.375
• Inside Diameter (mm): 9.525

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

• Mix Type: Static

• Number of Pieces: 10

• Orifice Diameter (in): 0.375

• Outside Diameter (in): 0.5

• Overall Length (cm): 25
• Overall Length (in): 9.65
• Overall Length (mm): 245

GG 60/0211/50

GG 60/0213/50

AGITATOR,ASSY,3/8-18EL

GG 60/0220/50

MIXER, ASSY, 1/8X24EL, LL, M W/LOCK

Graco 60/0220/50 1/8 x 24 in Mixer Assembly with Lock Ring

• For Use With: PR70, PR70v Two Component Liquid Dispensing Systems

• Includes: 1/8 x 24 Mixer, Lock Ring

• Inside Diameter (cm): 0.3175
• Inside Diameter (in): 0.125
• Inside Diameter (mm): 3.175

• Mix Type: Static

• Number of Pieces: 1

• Orifice Diameter (in): 0.125

• Outside Diameter (in): 0.25

• Overall Length (cm): 8
• Overall Length (in): 3
• Overall Length (mm): 76

GG 60/0313/97