GRACO INC. S10595

GG 24X160

LSR F4-5 SYSTEM, 5GAL/5GAL

Graco 24X160 1:1 Ratio 5 gal (20 liter) F4 Fluid Automation System with Casters

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-5.

• Precise ratio control, minimal material waste

  The F4-5 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.

  The result: More precise mixing, a better end product and less wasted material.

  • Easier operation with Graco Control Architecture

    The Graco Fluid Automation F4-5 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools

    • Better Color Control

      Mix two additive streams at ratios ranging from 0.5 to 6%

      • Maintains Material Integrity

        Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material

        • Cleanroom Convenience

          A smaller footprint and casters (optional on F4-5) allow for system movement and maintenance

          
          

          • Model: LSR
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Amperage (A): 4
          • Applicator Type: Automatic
          • Frequency (Hz): 50/60
          • Maximum Flow Rate (kg/min): 2.3
          • Maximum Flow Rate (lb/min): 5
          • Maximum Working Pressure (bar): 207
          • Maximum Working Pressure (kPa): 20700
          • Maximum Working Pressure (MPa): 21
          • Maximum Working Pressure (psi): 3000
          • Minimum Flow Rate (GPM): 10

GG 24X166

LSR F4-55-5 SYSTEM, LSR55-5GAL/55-5GAL, CSTERS

Graco 24X166 1:1 Ratio 5 gal (20 liter) F4 Fluid Automation System with Casters

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.

• Precise ratio control, minimal material waste

  The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.

  The result: More precise mixing, a better end product and less wasted material.

  • Easier operation with Graco Control Architecture

    The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools

    • Better Color Control

      Mix two additive streams at ratios ranging from 0.5 to 6%

      • Maintains Material Integrity

        Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material

        • Cleanroom Convenience

          A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance

          
          

          • Model: LSR
          • Air Inlet Size (cm): 1.27
          • Air Inlet Size (in): 1/2
          • Air Inlet Size (mm): 12.7
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Amperage (A): 4
          • Applicator Type: Automatic
          • Frequency (Hz): 50/60
          • Maximum Flow Rate (kg/min): 2.27
          • Maximum Flow Rate (lb/min): 5
          • Maximum Working Pressure (bar): 207
          • Maximum Working Pressure (kPa): 20700
          • Maximum Working Pressure (MPa): 21
          • Maximum Working Pressure (psi): 3000
          • Minimum Flow Rate (GPM): 10

GG 24X169

LSR F4-55 SYSTEM, 55GAL/55GAL

Graco 24X169 1:1 Ratio 55 gal (200 liter) F4-55 Fluid Automation System

In the manufacturing of liquid silicone rubber products, precision is paramount. Material waste is an expensive problem and substandard products are an intolerable failure. Minimize both with the Graco Fluid Automation F4-55.

• Precise ratio control, minimal material waste

  The F4-55 system takes the ability to meter material flow to an almost microscopic level. Its helical gear uses multiple gear teeth to measure flow in very small increments. The increased number of measurements offers more assurance the machine remains on-ratio.

  The result: More precise mixing, a better end product and less wasted material.

  • Easier operation with Graco Control Architecture

    The Graco Fluid Automation F4-55 system features intuitive user interfaces based on the Graco Control Architecture (GCA), a modular system of processing and control components. GCA makes maintenance and service easy, thanks to built-in troubleshooting tools

    • Better Color Control

      Mix two additive streams at ratios ranging from 0.5 to 6%

      • Maintains Material Integrity

        Stainless steel components meet the standard for clean room applications to prevent contamination, and cure inhibition and discoloration of material

        • Cleanroom Convenience

          A smaller footprint and casters (optional on F4-55) allow for system movement and maintenance

          
          

          • Model: LSR
          • Air Inlet Size (in): 1/2
          • Air Inlet Thread Gender: Female
          • Air Inlet Thread Type: NPT
          • Amperage (A): 4
          • Applicator Type: Automatic
          • Frequency (Hz): 50/60
          • Maximum Flow Rate (kg/min): 2.3
          • Maximum Flow Rate (lb/min): 5
          • Maximum Working Pressure (bar): 207
          • Maximum Working Pressure (kPa): 20700
          • Maximum Working Pressure (MPa): 21
          • Maximum Working Pressure (psi): 3000
          • Minimum Flow Rate (GPM): 10

GG 24W651

SENSOR, ASSEMBLY, G250/G3000

Graco 24W651 Electronic Sensor, G250/G3000

GG 24X384

GG 24X573

GG 24X764

KIT, REPLACEMENT, PP, POP-UP HEA

This item is no longer available. Please contact Graco Customer Service for replacement options.

GG 24X663

HEAD, MOLSA, 100-1.04MM/4-.041IN

Graco 24X663 MOLSA Head, 4 inches (100 mm) wide, 0.041 inch (1.04 mm) orifice diameter

Multi-Orifice Linear Stream Applicator (MOLSA) gives you faster cycle rates, more accurate dispensing and longer production life compared to competitive offerings.

• Ideal for applying liquid applied sound deadener (LASD) using the Graco 1K Ultra-Lite dispense valve.
• Port Plug Model
• 4.00 inches (102 mm) wide

• Model: MOLSA

• Check Valve Assemblies: No

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kg/cm 2): 211
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000

• Port Plugs: Yes

GG 24X812

GL-1 XL INJECTOR, 2 POINT

Graco 24X812 GL-1 XL Grease Injector, Two Point

Custom fit your system with Gracos adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.

• The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
• Includes an adjustable hex head nut to make adjusting the output simple
• No vent holes and fully enclosed press fittings to prevent leaking lubricant
• Rugged, single piece uni-body design built for the harshest environments

• Model: GL-1
• Series: XL
• Adjustable: Adjustable

• Application: In-Plant Machinery, Off-Road Equipment

• Compatible Material: Grease
• Compatible Metering Device: Single Line Parallel

• Cycle Indicator: Visual

• Dispense Outlet Size (cm): 0.33
• Dispense Outlet Size (in): 0.13
• Dispense Outlet Size (mm): 3.3
• Dispense Outlet Thread Type: NPT

• For Use With: Single Line Parallel Automatic Lubrication Systems

• Inlet Size (cm): 0.9525
• Inlet Size (in): 3/8
• Inlet Size (mm): 9.525

• Inlet Thread Type: NPT

• Maximum NLGI Grade: #2

• Maximum Operating Pressure (psi): 6000

• Maximum Output Volume (in cu ): 0.315

• Maximum Reset Pressure (psi): 1000

• Maximum Working Pressure (bar): 414
• Maximum Working Pressure (kPa): 41400
• Maximum Working Pressure (MPa): 41.4
• Maximum Working Pressure (psi): 6000

• Minimum Operating Pressure (psi): 1850
• Minimum Output Volume (in cu ): 0.035

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525
• Outlet Thread Type: NPT

GG 24X827

KIT, GUN, CABLE

Graco 24X827 Pro Xpc Auto Spray Head Kit for models LC1020 and LC2020

GG 24X425

CHEMSAFE PUMP, 515PT-P01A-PT3-PT-PT-PO-P

Graco 24X425 ChemSafe 515 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT Port

Gracos ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. Theres no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus theyre dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.

• Max flow rate of 16.6 gpm (63 lpm)
• High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
• Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
• Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater

• Model: ChemSafe
• Series: 515

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 1.27
• Fluid Inlet Size (in): 1/2
• Fluid Inlet Size (mm): 12.7
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 1.27
• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: PTFE

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: PTFE

• Maximum Air Consumption (SCFM): 29
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 381

• Maximum Flow Rate (GPM): 16
• Maximum Flow Rate (L/min): 60.6

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 100
• Maximum Operating Temperature ( degree F): 212

• Maximum Solid Size (cm): 0.4
• Maximum Solid Size (in): 0.16
• Maximum Solid Size (mm): 4

• Maximum Storage Temperature ( degree C): 27
• Maximum Storage Temperature ( degree F): 80

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 16
• Minimum Storage Temperature ( degree F): 60

• Power Source

GG 24X817

GL-1 XL INJECTOR, REPLACEMENT

Graco 24X817 GL-1 XL Grease Injector, Replacement

Custom fit your system with Gracos adjustable GL-1 series grease injectors. Designed to meet the needs of each lube point, these systems provide years of reliable operation in the harshest operating environments.

• The GL-1 XL injectors are offered both as a stand-alone and a replacement injector for manifold systems for easy customization to a variety of applications
• Includes an adjustable hex head nut to make adjusting the output simple
• No vent holes and fully enclosed press fittings to prevent leaking lubricant
• Rugged, single piece uni-body design built for the harshest environments

• Model: GL-1
• Series: XL
• Adjustable: Adjustable

• Application: In-Plant Machinery, Off-Road Equipment

• Compatible Material: Grease
• Compatible Metering Device: Single Line Parallel

• Cycle Indicator: Visual

• Dispense Outlet Size (cm): 0.33
• Dispense Outlet Size (in): 0.13
• Dispense Outlet Size (mm): 3.3
• Dispense Outlet Thread Type: NPT

• For Use With: Single Line Parallel Automatic Lubrication Systems

• Maximum NLGI Grade: #2

• Maximum Operating Pressure (psi): 6000

• Maximum Output Volume (in cu ): 0.305

• Maximum Reset Pressure (psi): 1000

• Maximum Working Pressure (bar): 414
• Maximum Working Pressure (kPa): 41400
• Maximum Working Pressure (MPa): 41.4
• Maximum Working Pressure (psi): 6000

• Minimum Operating Pressure (psi): 1850
• Minimum Output Volume (in cu ): 0.035

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525
• Outlet Thread Type: NPT

GG 24X427

CHEMSAFE PUMP, 307PT-P01A-PT3-PT-PT-PO

Graco 24X427 ChemSafe 307 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT Port

Gracos ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. Theres no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus theyre dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.

• Max flow rate of 7.9 gpm (30 lpm)
• High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
• Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
• Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater

• Model: ChemSafe
• Series: 307

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 0.9525
• Fluid Inlet Size (in): 3/8
• Fluid Inlet Size (mm): 9.525
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.9525
• Fluid Outlet Size (in): 3/8
• Fluid Outlet Size (mm): 9.525
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: PTFE

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: PTFE

• Maximum Air Consumption (SCFM): 9.3
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 610

• Maximum Flow Rate (GPM): 6.7
• Maximum Flow Rate (L/min): 25.4

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 100
• Maximum Operating Temperature ( degree F): 212

• Maximum Solid Size (cm): 0.2
• Maximum Solid Size (in): 0.08
• Maximum Solid Size (mm): 2

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 24X770

GG 24X821

GG 24X429

CHEMSAFE PUMP, 205PT-P01A-PT3-PT-PT-PO

Graco 24X429 ChemSafe 205 Air Operated Double Diaphragm Plastic Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT Port

Gracos ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. Theres no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus theyre dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.

• Max flow rate of 3.6 gpm (14 lpm)
• High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
• Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
• Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater

• Model: ChemSafe
• Series: 205

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 0.635
• Fluid Inlet Size (in): 1/4
• Fluid Inlet Size (mm): 6.35
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 0.635
• Fluid Outlet Size (in): 1/4
• Fluid Outlet Size (mm): 6.35
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: PTFE

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: PTFE

• Maximum Air Consumption (SCFM): 4.8
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 375

• Maximum Flow Rate (GPM): 2.5
• Maximum Flow Rate (L/min): 9.5

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 100
• Maximum Operating Temperature ( degree F): 212

• Maximum Solid Size (cm): 0.15
• Maximum Solid Size (in): 0.06
• Maximum Solid Size (mm): 1.5

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 24X421

CHEMSAFE PUMP, 1590PT-P01A-PT3-PT-PT-PO

Graco 24X421 ChemSafe 1590 Air Operated Double Diaphragm Plastic Pump with NPT Port

Graco's ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. There's no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus they're dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.

• Max flow rate of 85.2 gpm (322 lpm)
• High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
• Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
• Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater

• Model: ChemSafe
• Series: 1590

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 3.81
• Fluid Inlet Size (in): 1-1/2
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 3.81
• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: PTFE

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: PTFE

• Maximum Air Consumption (SCFM): 46
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 230

• Maximum Flow Rate (GPM): 100
• Maximum Flow Rate (L/min): 379

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 100
• Maximum Operating Temperature ( degree F): 212

• Maximum Solid Size (cm): 203
• Maximum Solid Size (in): 80
• Maximum Solid Size (mm): 2030

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 24X485

CHEMSAFE PUMP, 1590UH-P01A-UH3-UH-PT-PO

Graco 24X485 ChemSafe 1590 Air Operated Double Diaphragm Plastic Pump

• Model: ChemSafe
• Series: 1590

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 3.81
• Fluid Inlet Size (in): 1-1/2
• Fluid Inlet Size (mm): 38.1
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 3.81
• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: UHMWPE

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: UHMWPE

• Maximum Air Consumption (SCFM): 46
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 230

• Maximum Flow Rate (GPM): 100
• Maximum Flow Rate (L/min): 379

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 70
• Maximum Operating Temperature ( degree F): 158

• Maximum Solid Size (cm): 203
• Maximum Solid Size (in): 80
• Maximum Solid Size (mm): 2030

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 24X636

P2 EXTREME GUN,AUTOMATIC

Graco 24X636 Automatic Probler P2 Extreme Dispense Gun

The Probler P2 Extreme Gun is lightweight and easy to mount to automation platforms - even in difficult spraying positions. Its double piston design provides more than 300 pounds (136 kg) of mix chamber movement. The Probler P2 Extreme reduces maintenance, increases spraying uptime and is easy to use in high production environments.

Application: For high output spray polyurethane foam and polyurea applications

• The P2 Extreme elite:

  • Extreme wear stainless steal side blox and mix chamber housings
  • Alternate side block hose routings
  • Allows filters to be easily removed

• Easy daily maintenance

• Easy-to-replace mix chamber insert

  Anti-crossover design virtually eliminates possibility of material entering the air piston

• Application: Foam, Polyurea

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC

GG 24X822

GG 24X828

GG 24X423

CHEMSAFE PUMP, 1040PT-P01A-PT3-PT-PT-PO

Graco 24X423 ChemSafe 1040 Air Operated Double Diaphragm Pump with PTFE Seat, PTFE Ball, Overmolded PTFE Diaphragm, PTFE Fluid Path & NPT Port

Gracos ChemSafe pumps feature PTFE or UHMWPE (ultra high molecular weight polyethylene) corrosion-resistant fluid paths, which make them ideal for corrosive and abrasive chemicals. Theres no exposed metals and they can be configured in various materials to meet most abrasion, temperature, and chemical compatibility requirements. Plus theyre dead-head capable and achieve high flow rates while minimizing air consumption and operational noise.

• Max flow rate of 37.5 gpm (142 lpm)
• High quality machined design provides a precision fit and superior chemical containment compared to molded pumps
• Corrosion-resistant exterior with no exposed metal reduces maintenance, extends pump life and offers clean, safe operation
• Ideal for corrosive and abrasive liquids such as acids, fuels, glues, paints, resins, inks, or wastewater

• Model: ChemSafe
• Series: 1040

• Air Inlet Size (in): 1/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Polypropylene

• Compatible Material: Antifreeze, Detergent, Gel-Coat, Asphalt, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Water - Wastewater Treatment, Water - Wastewater Transfer, Food and Personal Care, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE Overmold

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: PTFE

• Manifold Configuration: Center Port
• Manifold O-Ring Material: PTFE
• Material: PTFE

• Maximum Air Consumption (SCFM): 46
• Maximum Air Pressure (bar): 7

• Maximum Air Pressure (kPa): 700
• Maximum Air Pressure (MPa): 0.7
• Maximum Air Pressure (psi): 100

• Maximum Cycle Rate (CPM): 260

• Maximum Flow Rate (GPM): 39
• Maximum Flow Rate (L/min): 148

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Fluid Pressure (bar): 7
• Maximum Fluid Pressure (kPa): 700
• Maximum Fluid Pressure (MPa): 0.7
• Maximum Fluid Pressure (psi): 100

• Maximum Operating Temperature ( degree C): 100
• Maximum Operating Temperature ( degree F): 212

• Maximum Solid Size (cm): 203
• Maximum Solid Size (in): 80
• Maximum Solid Size (mm): 2030

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Power Source: Air

GG 24X561

GG 24X829

GG 24X568

GG 24X482

GG 24X448

KIT, ENCODER, 1000PPR, 10MM

Graco 24X448 Encoder 1000Ppr 10Mm Kit

KIT INCLUDES: ENCODER, INCREMENTAL [QTY. 1], CABLE, M12, 8-PIN, 10.0M [QTY. 1], SCREW, MACHINE [QTY. 3], BRACKET, MOUNTING, ENCODER [QTY. 1]

GG 24X570

GG 24X834

GG 24X832

KIT, CASCADE

GG 24X856

GG 24X840

GG 24X885

GG 24X882

GG 24X890

GG 24Y192

DURA-FLO XL PUMP,34:1,(24 CM SST),LH

Graco 24Y192 35:1 - 580cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Stainless Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.

Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer

• XL 1000 Air Motor
  
  • Modular design for easier maintenance
  • Rugged body armor won't rust or dent
  • Highest technology air motor on the market
• 580cc Dura-Flo Lower
  
  • Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

Replaceable 1 1/2" -11 1/2 NPT Male Outlet Fitting

• Reduces repair costs

GG 24Y207

DURA-FLO 2400 PUMP, XL, 34:1, (24 CM CS)

Graco 24Y207 35:1 - 580cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• XL 1000 Air Motor
  

  Modular design for easier maintenance

  Rugged body armor wont rust or dent

  Highest technology air motor on the market

• 580cc Dura-Flo Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  
  

  • Model: Dura-Flo
  • Series: XL 2400
  • Air Inlet Size (in): 1
  • Air Inlet Size (mm): 25.4000
  • Air Inlet Thread Gender: Female
  • Air Inlet Thread Type: NPT
  • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
  • Fluid Outlet Size (in): 1-1/2
  • Fluid Outlet Thread Gender: Male
  • Fluid Outlet Thread Type: NPT
  • Material: Carbon Steel
  • Maximum Air Inlet Pressure (bar): 7
  • Maximum Air Inlet Pressure (kPa): 690
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Continuous Cycle Rate (CPM): 60
  • Maximum Flow Rate (GPM): 9.2
  • Maximum Flow Rate (L/min): 34.8
  • Maximum Operating Temperature ( degree C): 82
  • Maximum Operating Temperature ( degree F): 180
  • Maximum Working Pressure (bar): 234
  • Maximum Working Pressure (kPa): 23400
  • Maximum Working Pressure (MPa): 23.4
  • Maximum Working Pressure (psi): 3400
  • Power Type: Pneumatic
  • Pump Ratio: 35:1

GG 24Y206

DURA-FLO 2400 PUMP,XL,34:1,(24 CM SST),RH

Graco 24Y206 35:1 - 580cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty, Right Hand Stainless Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plant's production capacity.

Application: Long-lasting durability - Dura-Flo pumps are a time-tested, proven performer

• XL 1000 Air Motor
  
  • Modular design for easier maintenance
  • Rugged body armor won't rust or dent
  • Highest technology air motor on the market
• 580cc Dura-Flo Lower
  
  • Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

Replaceable 1 1/2" -11 1/2 NPT Male Outlet Fitting

• Reduces repair costs

GG 24Y212

DURA-FLO XL PUMP, 47:1, (18 CM CSTL)

Graco 24Y212 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty, Right Hand Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• XL 1000 Air Motor
  

  Modular design for easier maintenance

  Rugged body armor wont rust or dent

  Highest technology air motor on the market

• 430cc Dura-Flo Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  
  

  • Model: Dura-Flo
  • Series: XL 1800
  • Air Inlet Size (in): 1
  • Air Inlet Size (mm): 25.4
  • Air Inlet Thread Gender: Female
  • Air Inlet Thread Type: NPT
  • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
  • Fluid Outlet Size (in): 1-1/2
  • Fluid Outlet Size (mm): 38.1
  • Fluid Outlet Thread Gender: Male
  • Fluid Outlet Thread Type: NPT
  • Material: Carbon Steel
  • Maximum Air Inlet Pressure (bar): 6.9
  • Maximum Air Inlet Pressure (kPa): 690
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Continuous Cycle Rate (CPM): 60
  • Maximum Flow Rate (GPM): 6.9
  • Maximum Flow Rate (L/min): 26.12
  • Maximum Operating Temperature ( degree C): 66
  • Maximum Operating Temperature ( degree F): 150
  • Maximum Working Pressure (bar): 310
  • Maximum Working Pressure (kPa): 31000
  • Maximum Working Pressure (MPa): 31
  • Maximum Working Pressure (psi): 4500
  • Portable: Non-Portable
  • Power Type: Pneumatic
  • Pump Ratio: 47:1

GG 24Y211

DURA-FLO 1800 PUMP, XL, 47:1, (18 CM CSTL)

Graco 24Y211 47:1 - 430cc Dura-Flo Pump with XL 10000 Air Motor, Severe Duty, Long Carbon Steel Construction

Graco Supply Pumps reliably deliver one-component sealants, adhesives and other low to medium-viscosity materials to metering and dispensing systems. Maximize your plants production capacity.

• XL 1000 Air Motor
  

  Modular design for easier maintenance

  Rugged body armor wont rust or dent

  Highest technology air motor on the market

• 430cc Dura-Flo Lower
  

  Severe Duty coatings on rods and cylinder Extends production time

• Standard Threaded Coupler -

• Replaceable Seat

  Minimizes service costs

• Cast Outlet and Inlet Housing

  Improves structural integrity

  
  

  • Air Inlet Size (in): 1
  • Air Inlet Size (mm): 25.4
  • Air Inlet Thread Gender: Female
  • Air Inlet Thread Type: NPT
  • Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill
  • Fluid Outlet Size (in): 1-1/2
  • Fluid Outlet Size (mm): 38.1
  • Fluid Outlet Thread Gender: Male
  • Fluid Outlet Thread Type: NPT
  • Material: Carbon Steel
  • Maximum Air Inlet Pressure (bar): 6.9
  • Maximum Air Inlet Pressure (kPa): 690
  • Maximum Air Inlet Pressure (psi): 100
  • Maximum Continuous Cycle Rate (CPM): 60
  • Maximum Flow Rate (GPM): 6.9
  • Maximum Flow Rate (L/min): 26.12
  • Maximum Operating Temperature ( degree C): 66
  • Maximum Operating Temperature ( degree F): 150
  • Maximum Working Pressure (bar): 310
  • Maximum Working Pressure (kPa): 31000
  • Maximum Working Pressure (MPa): 31
  • Maximum Working Pressure (psi): 4500
  • Portable: Non-Portable
  • Power Type: Pneumatic
  • Pump Ratio: 47:1

GG 24Y240

REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT

Graco 24Y240 50 ft x 3/8 in Heated Hose, 2000 psi, RTD, Xtreme-Wrap, Reactor 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • New Xtreme-Wrap Scuff Guard

    Form fitting to the hose, no more baggy excess material

    Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance

    Sheds surface moisture and wont absorb water to weigh down the hose bundle, will not freeze solid in cold temperatures

    Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors

    • Joint Protectors

      Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.

      • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
      • Hoses are covered with foam insulation for heat retention
      • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
      • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
      • Helix-design whip hose uses braided copper wires for added flexibility and longer life
      • Resistance Temperature Detector (RTD)

        Graco's latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.

        
        

        • Model: Reactor 2
        • Series: Xtreme Wrap
        • Compatible Sprayer: Reactor 2
        • For Use With: Plural Component Proportioners
        • Hose Heating Type: External Heated
        • Hose Inside Diameter (in): 3/8
        • Hose Inside Diameter (mm): 9.525
        • Hose Length (ft): 50
        • Hose Length (m): 15.2
        • Inside Diameter (in): 3/8
        • Maximum Working Pressure (bar): 138
        • Maximum Working Pressure (kPa): 13800
        • Maximum Working Pressure (MPa): 13.8
        • Maximum Working Pressure (psi): 2000

GG 24Y241

REACTOR HEATED HOSE, X-WRAP, 3/8, 50', RT

Graco 24Y241 50 ft x 3/8 in Heated Hose, 3500 psi, RTD, Xtreme-Wrap, Reactor 2

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • New Xtreme-Wrap Scuff Guard

    Form fitting to the hose, no more baggy excess material

    Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance

    Sheds surface moisture and wont absorb water to weigh down the hose bundle, will not freeze solid in cold temperatures

    Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors

    • Joint Protectors

      Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.

      • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
      • Hoses are covered with foam insulation for heat retention
      • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
      • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
      • Helix-design whip hose uses braided copper wires for added flexibility and longer life
      • Resistance Temperature Detector (RTD)

        Graco's latest advanced controls on Reactor 2 and Integrated Reactor utilize RTD technology. RTDs offer the highest accuracy and the best day-to-day repeatability of material temperatures in your hose. RTD technology allows the machine to automatically shut down if the sensor is damaged, which saves wasted time and materials.

        
        

        • Model: Reactor 2
        • Series: Xtreme Wrap
        • Compatible Sprayer: Reactor 2
        • For Use With: Plural Component Proportioners
        • Hose Heating Type: External Heated
        • Hose Inside Diameter (in): 3/8
        • Hose Inside Diameter (mm): 9.525
        • Hose Length (ft): 50
        • Hose Length (m): 15.2
        • Inside Diameter (in): 3/8
        • Maximum Working Pressure (bar): 241
        • Maximum Working Pressure (kPa): 24100
        • Maximum Working Pressure (MPa): 24.1
        • Maximum Working Pressure (psi): 3500

GG 24Y262

GG 24Y263

GG 24Y264

GG 24Y307

KIT, CONTROLLER, SOLVENT-BORNE

Graco 24Y307 Pro Xpc Auto Controller, Solventborne

GG 24Y335

GG 24Y343

GG 24Y434

GG 24Y498

LUBEPRO H1900 PUMP

Graco 24Y498 LubePro H1900 Horizontal Oil Pump - NPT

Without proper lubrication your factory's machines can suffer from downtime and reduced life, which impacts your company's bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Graco's Fire-Ball pump - the leader in durability and quality for over 50 years.

• LubePro H1900 is compatible with GL-42 and GL-43 injectors
• Pressure Ratio of 19:1
• H1900 delivers a greater output than competitive models at 3.0 in cu (49.2 cm cu ) per stroke
• Pneumatic power makes it easy to install into existing air line
• Optional Low Level Detection available, factory installed
• Built with high-quality seals tested to outperform the competition
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: H1900

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 12.76
• Maximum Air Inlet Pressure (kPa): 1276
• Maximum Air Inlet Pressure (psi): 185

• Maximum Fill Inlet Pressure (bar): 5.52
• Maximum Fill Inlet Pressure (kPa): 552
• Maximum Fill Inlet Pressure (psi): 80

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum cST Grade (cST): 40

• Overall Width (cm): 39.4
• Overall Width (in): 15.5
• Overall Width (mm): 394

• Power Type: Pneumatic

GG 24Y472

KIT, REPAIR, PISTON, PUMP

Graco 24Y472 ProXChange Pump

On-the-job pump repairs are fast and easy with the ProXChange Pump Replacement System. In 4 simple steps, you can remove and replace the pump cartridge. With a spare ProXChange pump on-hand, youll never have a down day.

• Exceptional durability and long lasting piston pump
• Eliminate service center repair costs and travel time expenses
• Built-in hex nut slot on frame of sprayer for easy pump removal
• Modular in design for quick and easy repair
• Simply slide front plate up and remove entire pump to replace pump kit
• No tools required

• Model: ProXChange

• For Use With: Magnum A60 ProPlus, Magnum A80 ProPlus, Magnum ProS19 ProPlus, Magnum ProS21 ProPlus

• Includes: Labels (2), Manual, Module, Cap,

• Number of Pieces: 6

GG 24Y548

GG 24Y546

GG 24Y559

HUSKY SYSTEM, CART, 1050P-E, PP/PT/PTS/5B

Graco 24Y559 Husky 1050e PP Electric Operated Double Diaphragm Plastic Pump System with Cart, PTFE

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

• Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves
• Energy efficient - electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
• Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

• Model: Husky
• Series: 1050e

• Air Inlet Size (in): 3/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Compatible Material: Antifreeze, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Detergent, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4
• Fluid Section Material: Polypropylene

• Manifold Configuration: Center Port
• Material: Polypropylene

• Maximum Air Pressure (bar): 5.5

• Maximum Air Pressure (kPa): 550
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 5.2

• Maximum Cycle Rate (CPM): 280

• Maximum Flow Rate (GPM): 42
• Maximum Flow Rate (L/min): 159

• Maximum Fluid Pressure (bar): 4.8
• Maximum Fluid Pressure (kPa): 480
• Maximum Fluid Pressure (MPa): 0.48
• Maximum Fluid Pressure (psi): 70

• Maximum Fluid Pressure (bar): 4.8
• Maximum Fluid Pressure (kPa): 480
• Maximum Fluid Pressure (MPa): 0.48
• Maximum Fluid Pressure (psi): 70

• Maximum Motor Speed (RPM): 3600

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Solid Size (cm): 0.3175
• Maximum Solid Size (in): 0.125
• Maximum Solid Size (mm): 3.175

• Maximum Storage Temperature ( degree C): 40
• Maximum Storage Temperature ( degree F): 104

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Motor Type: Brushless DC

• Power Rating (HP): 2.2
• Power Source: Electric

GG 24Y561

HUSKY SYSTEM, CART, 1050S-E, SS/PT/PTS/5B

Graco 24Y561 Husky 1050e SS Electric Operated Double Diaphragm Metal Pump System with Cart, PTFE

Our Husky e-Series pumps are ideal for applications that require low pulsation and a smooth flow. The patented air charged drive allows for the elimination or reduction of pulsation WITHOUT expensive pulsation dampeners or surge tanks.

• Patent pending technology allows pump to stall under pressure preventing pump failures from clogged lines or closed valves
• Energy efficient - electric drive reduces energy consumption up to 5x compared to traditional air operated diaphragm pumps
• Seal-less diaphragm pump design eliminates leaking and failures due to run-dry pump conditions

• Model: Husky
• Series: 1050e

• Air Inlet Size (in): 3/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Ball Material: PTFE

• Center Section Material: Aluminum

• Compatible Material: Antifreeze, Gel-Coat, Polyurethane, Windshield Washer Fluid, Diesel Exhaust Fluid, Detergent, Motor Oil, Grease & Oil, Used Oil, Hydraulic Fluid, Transmission Fluid, Cutting Oil, Oil, Water, Water - Wastewater Treatment, Water - Wastewater Transfer, Water, Waterborne, Solvent borne, High Solids, Plural Components, CARC, Metallics, Topcoats, Stains, Varnish, Lacquer, Ceramics, Enamel, Epoxies, Ink

• Connection Type: Threaded

• Diaphragm Compatible Material: PTFE
• Diaphragm Material: PTFE

• Fluid Inlet Size (cm): 2.54
• Fluid Inlet Size (in): 1
• Fluid Inlet Size (mm): 25.4
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: NPT

• Fluid Outlet Size (cm): 2.54
• Fluid Outlet Size (in): 1
• Fluid Outlet Size (mm): 25.4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT
• Fluid Section Material: Stainless Steel

• Manifold Configuration: Center Port
• Material: Stainless Steel

• Maximum Air Pressure (bar): 5.5

• Maximum Air Pressure (kPa): 550
• Maximum Air Pressure (MPa): 0.55
• Maximum Air Pressure (psi): 80
• Maximum Amperage (A): 5.2

• Maximum Cycle Rate (CPM): 280

• Maximum Flow Rate (GPM): 42
• Maximum Flow Rate (L/min): 159

• Maximum Fluid Pressure (bar): 4.8
• Maximum Fluid Pressure (kPa): 480
• Maximum Fluid Pressure (MPa): 0.48
• Maximum Fluid Pressure (psi): 70

• Maximum Fluid Pressure (bar): 4.8
• Maximum Fluid Pressure (kPa): 480
• Maximum Fluid Pressure (MPa): 0.48
• Maximum Fluid Pressure (psi): 70

• Maximum Motor Speed (RPM): 3600

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Solid Size (cm): 0.3175
• Maximum Solid Size (in): 0.125
• Maximum Solid Size (mm): 3.175

• Maximum Storage Temperature ( degree C): 40
• Maximum Storage Temperature ( degree F): 104

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Minimum Storage Temperature ( degree C): 0
• Minimum Storage Temperature ( degree F): 32

• Motor Type: Brushless DC

• Power

GG 24Y651

KIT, THROAT CARTRIDGE

GG 24Y661

GG 24Y670

KIT, THROAT CARTRIDGE, 70CC

GG 24Y678

REACTOR HEATED HOSE, X-WRAP, 3/8, 50'

Graco 24Y678 50 ft x 3/8 in Heated Hose, 2000 psi, Thermocouple, Xtreme-Wrap, Reactor 1

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • New Xtreme-Wrap Scuff Guard

    Form fitting to the hose, no more baggy excess material

    Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance

    Sheds surface moisture and wont absorb water to weigh down the hose bundle, will not freeze solid in cold temperatures

    Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors

    • Joint Protectors

      Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.

      • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
      • Hoses are covered with foam insulation for heat retention
      • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
      • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
      • Helix-design whip hose uses braided copper wires for added flexibility and longer life

      
      

      • Model: Reactor 1
      • Series: Xtreme Wrap
      • Compatible Sprayer: Reactor 1
      • For Use With: Plural Component Proportioners
      • Hose Heating Type: External Heated
      • Hose Inside Diameter (in): 3/8
      • Hose Inside Diameter (mm): 9.525
      • Hose Length (ft): 50
      • Hose Length (m): 15.2
      • Inside Diameter (in): 3/8
      • Maximum Working Pressure (bar): 138
      • Maximum Working Pressure (kPa): 13800
      • Maximum Working Pressure (MPa): 13.8
      • Maximum Working Pressure (psi): 2000

GG 24Y771

GG 24Y679

REACTOR HEATED HOSE, X-WRAP, 3/8, 50'

Graco 24Y679 50 ft x 3/8 in Heated Hose, 3500 psi, Thermocouple, Xtreme-Wrap, Reactor 1

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:
  • Provides 10-times* the flex life compared to previous flat copper heating element
  • Long-term, even heating without hot spots
  • Backwards compatible with existing Reactor heated hoses
• New Xtreme-Wrap Scuff Guard
  • Form fitting to the hose, no more baggy excess material
  • Made from urethane coated ballistic nylon for puncture and tear resistance, abrasion protection, and oil and water resistance
  • Sheds surface moisture and won't absorb water to weigh down the hose bundle, will not freeze solid in cold temperatures
  • Hook and Loop enclosure used on the entire length of the hose for easy access to the hoses, fittings, and fluid temperature sensors
• Joint Protectors
  • Joint Protectors provide additional protection at the most vulnerable section of the hose: the electrical connections, hose fittings, and fluid temperature sensors. All 50 ft (15 m) hoses with the new Xtreme-Wrap will come with one Joint Protector.
• Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
• Hoses are covered with foam insulation for heat retention
• Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
• Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
• Helix-design whip hose uses braided copper wires for added flexibility and longer life

• Model: Reactor 1
• Series: Xtreme Wrap

• Compatible Sprayer: Reactor 1

• For Use With: Plural Component Proportioners

• Hose Heating Type: External Heated
• Hose Inside Diameter (in): 3/8
• Hose Inside Diameter (mm): 9.525
• Hose Length (ft): 50
• Hose Length (m): 15.2

• Inside Diameter (in): 3/8

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

GG 24Y772

GG 24Y778

KIT,MODULE,GCA,MCM,SALEABLE

KIT INCLUDES: MODULE, GCA, MCM [QTY. 1], KIT INCLUDES: HEAD, RATIO, CATALYST [QTY. 1], KIT, AIR CAP, INTERNAL MIX [QTY. 1], RING, LOCKING [QTY. 1], SEAL, RATIO, CATALYST [QTY. 1], FITTING, 1/8 NPT X 1/4 TUBE, SS [QTY. 1], HOSE, TUBNG, P.E., .250OD NATURA [QTY. 2]

GG 24Y801

GG 24Y803

GG 24Y827

GG 24Y842

GG 24Y846

GG 24Y849

KIT, LEAK DETECTOR, SOLOTECH

Graco 24Y849 SoloTech Leak Detector Kit

GG 24Y864

SD SERIES 5 REEL, CORD, BLK, TRIPLUG, GFCI

Graco 24Y864 SD 5 Series 120 Volt Cord Reel - Tri-Plug GFCI Industrial Receptacle - 50 ft (15 m), 12 AWG, 15 Amp Cord - Black

Organize your work space for a safer, more productive work environment. Make Graco your single source for your entire reel bank.

• Heavy-duty steel construction, SD Series size 5.
• 50 foot cord and features a 5 foot lead-in cable.
• Duplex GFCI receptacle
• Heavy-Duty Pedestal - High-strength steel construction with rolled edges and ribbed stress points that wont flex or twist.

• Model: SD
• Series: 5

• Cord Length (ft): 50
• Cord Length (m): 15

• Includes: Tri-Plug GFCI Industrial Receptacle

• Insulation Type: SJOOW

• Maximum Current (A): 15

• Maximum Operating Temperature ( degree C): 50
• Maximum Operating Temperature ( degree F): 122

• Overall Height (cm): 37.59
• Overall Height (in): 14.8
• Overall Height (mm): 375.9
• Overall Length (cm): 35.2
• Overall Length (in): 13.84
• Overall Length (mm): 352
• Overall Width (cm): 11.938
• Overall Width (in): 4.7
• Overall Width (mm): 119.38

• Power Cord Connect Type: NEMA 5-15P

• Reel Color: Black

GG 24Y870

SD SERIES 5 REEL, LIGHT, BLK, LED (110V)

Graco 24Y870 SD 5 Series 120 Volt Light Reel - LED Light - 50 ft (15 m), 16 AWG, <1 Amp Cord - Black

The SD 5 and SD 10 Series Cord and Light Reels allow you to organize your work space for a safer, more productive work environment. Choose from 35, 50 and 95 foot (11, 15, 29 meter) options

to fit your shop perfectly. Make Graco your single source for your entire reel bank.

Application: Ideal for automotive dealerships, fast lube centers, service shops, heavy-duty dealerships, fleet service facilities, in-plant, lube truck, mining and more.

• Heavy-duty steel construction, SD Series size 5.
• 50 foot cord and features a 5 foot lead-in cable.
• LED light
• Heavy-Duty Pedestal

  High-strength steel construction with rolled edges and ribbed stress points that won't flex or twist.

  
  

  • Model: SD
  • Series: 5
  • Cord Length (ft): 50
  • Cord Length (m): 15
  • Includes: LED Light
  • Insulation Type: SJTOW
  • Maximum Current (A): 0.05
  • Maximum Operating Temperature ( degree C): 40
  • Maximum Operating Temperature ( degree F): 104
  • Overall Height (cm): 37.59
  • Overall Height (in): 14.8
  • Overall Height (mm): 375.9
  • Overall Length (cm): 35.2
  • Overall Length (in): 13.84
  • Overall Length (mm): 352
  • Overall Width (cm): 11.938
  • Overall Width (in): 4.7
  • Overall Width (mm): 119.38
  • Power Cord Connect Type: NEMA 5-15P
  • Reel Color: Black

GG 24Y937

MANIFOLD,ASSY,CC,2 VALVE,LP,CIRC

Graco 24Y937 2 Valve SST Low Pressure Circulating Valve

Low Pressure Non-Circulating Valve

• Compatible Material: CARC, High Solids, Metallics, Solventborne, Stains, Topcoats, Varnish, Waterborne, Xirallic

GG 24Y936

MANIFOLD, ASSY, CC, 2 VALVE, LP

Graco 24Y936 2 Valve SST Low Pressure Non-Circulating Valve

Low Pressure Non-Circulating Valve

GG 24Y938

MANIFOLD,ASSY,CC,3 VALVE,LP

Graco 24Y938 3 Valve SST Low Pressure Non-Circulating Valve

Low Pressure Non-Circulating Valve

GG 24Y939

MANIFOLD,ASSY,CC,3 VALVE,LP,CIRC

Graco 24Y939 3 Valve SST Low Pressure Circulating Valve

Low Pressure Non-Circulating Valve

GG 24Y940

MANIFOLD,ASSY,CC,4 VALVE,LP

Graco 24Y940 4 Valve SST Low Pressure Non-Circulating Valve

GG 24Y942

MANIFOLD,ASSY,CC,5 VALVE,LP

Graco 24Y942 5 Valve SST Low Pressure Non-Circulating Valve

GG 24Y943

MANIFOLD,ASSY,CC,5 VALVE,LP,CIRC

Graco 24Y943 5 Valve SST Low Pressure Circulating Valve

GG 24Z014

PROMIX 2KE PROPORTIONER, METER, ACID

Graco 24Z014 ProMix 2KE Acid Catalyst Meter, 3 color/1 catalyst, IS, intrinsically safe alternator power

The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate.

• Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion.
• Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
• Stay on ratio within predefined tolerance limits, down to plus/minus 02% with the pump version, plus/minus 01% with meter
• Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more

• Model: ProMix
• Series: 2KE

• Air Inlet Size (cm): 0.9525
• Air Inlet Size (in): 3/8
• Air Inlet Size (mm): 9.525
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Amperage (A): 2

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Activation: Manual

• Includes: 2KE Meter-Based Proportioner, G3000 (A), G3000A (B), 3 Color, 1 Catalyst, Intrinsically Safe Alternator Power

• Material Type: Two Component

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Fluid Viscosity (cP): 5000

• Maximum Fluid Viscosity (cP): 5000

• Maximum Number of Colors: Up to 3

• Maximum Working Pressure (bar): 206.8
• Maximum Working Pressure (kPa): 20680
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000
• Measuring Type: Meter

• Minimum Fluid Viscosity (cP): 20
• Minimum Mix Ratio: 0.1:1

• Mix Accuracy (%): 1

• Number of Catalysts: 1
• Number of Color Valves: N/A
• Number of Colors: 3

• Number of Resin Colors: 3

• Power Source: Electric

• Proportioning Type: Manual Electronic

• Pump Ratio: Meter only

GG 24Z084.

GG 24Z016

PROMIX 2KE PROPORTIONER, METER, ACID

Graco 24Z016 ProMix 2KE Acid Catalyst Meter, 3 color/1 catalyst, non intrinsically safe AC powered

The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate.

• Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion.
• Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
• Stay on ratio within predefined tolerance limits, down to plus/minus 02% with the pump version, plus/minus 01% with meter
• Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more

• Model: ProMix
• Series: 2KE

• Air Inlet Size (cm): 0.9525
• Air Inlet Size (in): 3/8
• Air Inlet Size (mm): 9.525
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Amperage (A): 2

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Activation: Manual

• Includes: 2KE Meter-Based Proportioner, G3000 (A), G3000A (B), 3 Color, 1 Catalyst, Non Intrinsically Safe AC Powered

• Material Type: Two Component

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Fluid Viscosity (cP): 5000

• Maximum Fluid Viscosity (cP): 5000

• Maximum Number of Colors: Up to 3

• Maximum Working Pressure (bar): 206.8
• Maximum Working Pressure (kPa): 20680
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000
• Measuring Type: Meter

• Minimum Fluid Viscosity (cP): 20
• Minimum Mix Ratio: 0.1:1

• Mix Accuracy (%): 1

• Number of Catalysts: 1
• Number of Color Valves: N/A
• Number of Colors: 3

• Number of Resin Colors: 3

• Power Source: Electric

• Proportioning Type: Manual Electronic

• Pump Ratio: Meter only

GG 24Z509

CSP VALVE, 16 OUTLET, NPT, IND, PKG

Graco 24Z509 CSP Divider Valve, 1/8 inch NPT, 16 Outlets, Indicator Included

Compact Series Progressive (CSP) valve with broad market versatility. Combine with field-proven G-Series pumps for a complete system solution.

• 1/8 inch NPT inlet
• Space efficient design with 16 outlets, with indicator
• Outlets can be combined to meet larger bearing needs
• High output pressure - maximum working pressure of 5,076 psi (350 bar) for both oil and grease

• Model: Trabon
• Series: CSP

• Application: On-Road Vehicles, Off-Road Equipment

• Compatible Material: Oil, Grease

• Cycle Indicator: Cycle Indicator

• Discharge Per Piston Stroke (in cu ): N/A

• Divider Valve Series: CSP

• Inlet Size (cm): 0.3175
• Inlet Size (in): 1/8
• Inlet Size (mm): 3.175

• Inlet Thread Type: NPT

• Material: Carbon Steel

• Maximum NLGI Grade: #2

• Maximum Operating Temperature ( degree C): 100
• Maximum Operating Temperature ( degree F): 212

• Maximum Working Pressure (bar): 350
• Maximum Working Pressure (kPa): 35000
• Maximum Working Pressure (psi): 5076

• Minimum Output Volume (cm cu ): 0.2

• Minimum Working Pressure (bar): 15
• Minimum Working Pressure (kPa): 1500

• Minimum Working Pressure (psi): 217.5

• Number of Outlets: 16

• Outlet Thread Gender: Female
• Outlet Thread Type: NPT

GG 24Z226

GG 24Z550

GG 24Z093

GG 24Z686

GREASE JOCKEY INJECTOR, MTR, ASSY, #4

Graco 24Z686 Grease Jockey Injector - #4, 4 Output Spacers, 0.015 cu in (0.25 cc)

Designed for frequent, medium-pressure metering and includes system pressure monitoring.

• Two piece compression fitting included for fast, easy installation.
• Bundled system tubing available for easy installation.
• Threaded outlet allows for manifold mounting.
• Grease Jockey Injector Size #4
• 4 Output Spacers

• Model: Grease Jockey
• Adjustable: Adjustable

• Application: On-Road Vehicles

• Compatible Material: Grease

• For Use With: Grease Jockey Automatic Lubrication Systems

• Maximum NLGI Grade: #2

• Maximum Working Pressure (bar): 137.9
• Maximum Working Pressure (kPa): 13790
• Maximum Working Pressure (MPa): 13.8
• Maximum Working Pressure (psi): 2000

GG 24Z177

GG 24Z028

LUBEPRO A2800 PUMP, OIL, 2.0L, N.C, LL

Graco 24Z028 LubePro A2800 Vertical Oil Pumps, 2 liter Reservoir, Normally Closed, Low Level - NPT

Without proper lubrication your factorys machines can suffer from downtime and reduced life, which impacts your companys bottom line. Avoid the hassle. LubePro series leverages the same proven quality and leading technology as Gracos Fire-Ball pump - the leader in durability and quality for over 50 years.

• LubePro A2800 is compatible with GL-1, GL-32 and GL-33 injectors
• Pressure Ratio of 28:1
• A2800 delivers a greater output than competitive models at 0.56 in cu (9.18 cm cu ) per stroke
• Factory installed Low Level Detection available
• Integrated vent automatically and reliably relieves pressure on return stroke, no pressure switch or wiring required
• Built with high-quality seals tested to outperform the competition
• High-strength, shatter resistant, 2 liter reservoir
• Optimally lubricates while your machines are running
• Provides accurate, reliable lubrication for every lube point
• Provides higher lube output and faster lubrication cycle

• Model: LubePro
• Series: A2800

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: In-Plant Machinery

• Compatible Material: Oil
• Compatible Metering Device: Series Progressive, Single Line Parallel

• Fluid Outlet Size (in): 0.25
• Fluid Outlet Size (mm): 6.3500
• Fluid Outlet Thread Type: NPT

• Includes: Low Level

• Maximum Air Inlet Pressure (bar): 12.07
• Maximum Air Inlet Pressure (kPa): 1207
• Maximum Air Inlet Pressure (psi): 175

• Maximum Working Pressure (bar): 241
• Maximum Working Pressure (kPa): 24100
• Maximum Working Pressure (MPa): 24.1
• Maximum Working Pressure (psi): 3500

• Minimum cST Grade (cST): 40

• Overall Depth (cm): 13
• Overall Depth (in): 5.1
• Overall Depth (mm): 130

• Overall Height (cm): 50.4
• Overall Height (in): 19.83
• Overall Height (mm): 504
• Overall Width (cm): 17.3
• Overall Width (in): 6.8
• Overall Width (mm): 173

• Power Type: Pneumatic

GG 24Z098

KIT, CONTROLLER-VOLT, BELL-SB

Graco 24Z098 ProBell Electrostatic Controller for Solvent borne. Maximum voltage output at applicator is 100 kV.

Electrostatic Controller, for waterborne applications, includes power supply cord and I/O cable

• Voltage and current can be independently adjusted to meet specific manufacturing requirements
• Full system integration with PLC or switch box control
• Improves safety by automatically shutting off electrostatics when the part is too close to the gun

• Model: ProBell

GG 24Z013

PROMIX 2KE PROPORTIONER, METER, ACID

Graco 24Z013 ProMix 2KE Acid Catalyst Meter, 1 color/1 catalyst, IS, intrinsically safe alternator power

The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate.

• Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion.
• Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
• Stay on ratio within predefined tolerance limits, down to plus/minus 02% with the pump version, plus/minus 01% with meter
• Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more

• Model: ProMix
• Series: 2KE

• Air Inlet Size (cm): 0.9525
• Air Inlet Size (in): 3/8
• Air Inlet Size (mm): 9.525
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Amperage (A): 2

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Activation: Manual

• Includes: 2KE Meter-Based Proportioner, G3000 (A), G3000A (B), 1 Color, 1 Catalyst, Intrinsically Safe Alternator Power

• Material Type: Two Component

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Fluid Viscosity (cP): 5000

• Maximum Fluid Viscosity (cP): 5000

• Maximum Number of Colors: Up to 3

• Maximum Working Pressure (bar): 206.8
• Maximum Working Pressure (kPa): 20680
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000
• Measuring Type: Meter

• Minimum Fluid Viscosity (cP): 20
• Minimum Mix Ratio: 0.1:1

• Mix Accuracy (%): 1

• Number of Catalysts: 1
• Number of Color Valves: N/A
• Number of Colors: 1

• Number of Resin Colors: 1

• Power Source: Electric

• Proportioning Type: Manual Electronic

• Pump Ratio: Meter only

GG 24Z720

GG 24Z095

KIT,REPAIR,TOF 200 PLATEN RTD

KIT INCLUDES: HARNESS, INPUT, MZLP1, RTD, OT, TOF [QTY. 1], CONNECTOR, 3 CONDUCTOR, LEVERLOCK [QTY. 1], CONNECTOR, 2 CONDUCTOR, LEVERLOCK [QTY. 2], SENSOR, RTD, W/600V HEATSHRINK [QTY. 1], FERRULE, LT BLUE, 24AWG [QTY. 2]

GG 24Z715

GG 24Z015

PROMIX 2KE PROPORTIONER, METER, ACID

Graco 24Z015 ProMix 2KE Acid Catalyst Meter, 1 color/1 catalyst, non intrinsically safe alternator power

The ProMix 2KE meter-based system manages tough acid catalyst materials, such as conversion varnish for cabinetry and bar counter tops. The compact, entry-level proportioner easily handles strong acid catalysts with its corrosion resistant fluid section and smart fluid plate.

• Made with durable, high grade, stainless steel components like gears with ceramic bearings, the G3000A meter gauges the exact mix ratio while withstanding corrosion.
• Choose between pump-based or meter-based plural component systems with mix ratios up to 30:1
• Stay on ratio within predefined tolerance limits, down to plus/minus 02% with the pump version, plus/minus 01% with meter
• Easy-to-use LCD display allows you to track material usage, display mix ratio, program maintenance reminders operate, control operation functions and more

• Model: ProMix
• Series: 2KE

• Air Inlet Size (cm): 0.9525
• Air Inlet Size (in): 3/8
• Air Inlet Size (mm): 9.525
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Amperage (A): 2

• Component Type: Two Component

• Flush Type: Solvent

• Frequency (Hz): 50/60

• Gun Activation: Manual

• Includes: 2KE Meter-Based Proportioner, G3000 (A), G3000A (B), 1 Color, 1 Catalyst, Non Intrinsically Safe AC Powered

• Material Type: Two Component

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (psi): 100

• Maximum Fluid Viscosity (cP): 5000

• Maximum Fluid Viscosity (cP): 5000

• Maximum Number of Colors: Up to 3

• Maximum Working Pressure (bar): 206.8
• Maximum Working Pressure (kPa): 20680
• Maximum Working Pressure (MPa): 20.7
• Maximum Working Pressure (psi): 3000
• Measuring Type: Meter