GRACO INC. S10595

GG 255663

KIT, PLATEN, 55 GL, EPDM

KIT INCLUDES: PLATE, WIPER 55GAL EPDM [QTY. 1], KIT INCLUDES: PLATE, WIPER 55GAL NEOPRENE [QTY. 1],

GG 255675

KIT,PNEUMATIC X-OVER,3

KIT INCLUDES: FITTING, TEE, STREET [QTY. 2], FITTING, NIPPLE, HEX [QTY. 2], VALVE, PNEUMATIC, 3-WAY, N.C. [QTY. 2], VALVE, BALL, VENTED, .750 [QTY. 2], TUBING, NYLON, ROUND [QTY. 0.5 ], BUSHING, REDUCING [QTY. 4 ], FITTING, TUBE, QD [QTY. 2], FITTING, TUBE, QD ( 90 DEG SWIVEL) [QTY. 2], FITTING, TUBE, MALE (1/4 NPT) [QTY. 2], BRACKET, CORSSOVER, PAINTED 3 in. [QTY. 2], BRACKET, LIMIT VALVE [QTY. 2], WASHER, PLAIN [QTY. 4 ], SCREW, CAP, SCH [QTY. 4 ], WASHER, LOCK, #10 [QTY. 6 ], NUT, HEX MSCR [QTY. 4 ], VALVE, LIMIT, AIR [QTY. 2], WASHER, FLAT [QTY. 4 ], SCREW, CAP, SOCKET HD [QTY. 4 ], WASHER, LOCK, SPRING [QTY. 4 ], NUT, HEX MSCR [QTY. 4 ], WASHER, LOCK [QTY. 6 ], SCREW, CAP, SOCKET HEAD [QTY. 6 ], PLATE, MOUNTING, 4-WAY VALVE [QTY. 1], VALVE, AIR, REMOTE, 4 WAY [QTY. 1], SCREW, SHC, 10-24X1.125, S [QTY. 2],

GG 255687

KIT, REPAIR, RAM PISTON, 3"

KIT INCLUDES: RETAINER, RETAINING RING 1.88 BORE [QTY. 2], SPRING, COMPRESSION [QTY. 2], RING, RETAINING, INTERNAL [QTY. 2], PACKING, O-RING, BUNA-N [QTY. 4 ], PACKING, O-RING [QTY. 2], BEARING, RAM END CAP [QTY. 2], NUT, FULL HEX [QTY. 2], WASHER, SPRING LOCK [QTY. 2], PACKING, O-RING [QTY. 2], LUBRICANT, TUBE, 1 OZ [QTY. 1]

GG 255688

RAM,6.5" , WITH AIR CONTROLS

GG 255719

GG 255720

GG 255727

GG 255765

BOARD, CIRCUIT, PROMIX PLUS CONTROL

Graco 255765 Fluid Station Control Board for ProMix 2KS Plural Component Proportioner

GG 255581

GG 255767

BOARD, ASSY, PROMIX PLUS EASYKEY

Graco 255767 EasyKey Display Board for ProControl 1KS

GG 255854

GG 255857

GG 255858

GG 255884

GG 255616

GG 255901

MD2 VALVE, DISPENSE, 1:1, ELITE, SNUFF

Graco 255901 MD2 Valve, 1:1 Ratio, Elite Hard Seat, Non-adjustable Snuff-back

Mixing dispense (MD) valve for 2 component materials minimizes maintenance while maximizing production.

• 1:1 ratio nose handles a wide range of material.
• Hard seats with Elite construction withstand highly abrasive material at least 10 times longer than standard construction. (Data verified in Graco test environment.)
• Snuff-back control prevents dripping as it brings material back into the valve until next dispense.
• No unique tools are required for maintenance or repair.
• Grease isolation chamber protects moisture sensitive materials and has accessible grease fittings for easy maintenance
• No unique tools required

• Model: Two Component Mixing Dispense Valve
• Series: MD2

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Thermal Management, Molding

• Compatible Material: Sealants, Adhesives

• Component Type: Plural-Component

• Fluid Inlet Size (cm): 1.42875
• Fluid Inlet Size (in): 9/16
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: UNF

• Fluid Outlet Size (in): 7/8
• Fluid Outlet Thread Type: UNC

• Gun Activation: Automatic

• Includes: Dispense Valve, 1:1 Ratio Night Cap, 1:1 Ratio Check Adapter, ASM Aid Tool

• Maximum Viscosity (cP): 1000000

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kg/cm 2): 210.9
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (psi): 3000

• Mount Hole Thread Gender: Female
• Mount Hole Thread Type: Metric

GG 255902

MD2 VALVE, DISPENSE, 10:1, ELITE, SNUFF

Graco 255902 MD2 Valve, 10:1 Ratio, Elite Hard Seat, Non-adjustable Snuff-back

Mixing dispense (MD) valve for 2 component materials minimizes maintenance while maximizing production.

• 10:1 ratio nose handles a wide range of material.
• Hard seats with Elite construction withstand highly abrasive material at least 10 times longer than standard construction. (Data verified in Graco test environment.)
• Snuff-back control prevents dripping as it brings material back into the valve until next dispense.
• Independent air cylinder improves mean time to repair (MTTR).
• No unique tools are required for maintenance or repair.
• No unique tools required

• Model: Two Component Mixing Dispense Valve
• Series: MD2

• Air Inlet Size (in): 1/8
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Thermal Management, Molding

• Compatible Material: Sealants, Adhesives

• Component Type: Plural-Component

• Fluid Inlet Size (cm): 1.42875
• Fluid Inlet Size (in): 9/16
• Fluid Inlet Thread Gender: Female
• Fluid Inlet Thread Type: UNF

• Fluid Outlet Size (in): 7/8
• Fluid Outlet Thread Type: UNC

• Gun Activation: Automatic

• Includes: Dispense Valve, 10:1 Ratio Night Cap, 10:1 Ratio Check Adapter, ASM Aid Tool

• Maximum Viscosity (cP): 1000000

• Maximum Working Pressure (bar): 207
• Maximum Working Pressure (kg/cm 2): 210.9
• Maximum Working Pressure (kPa): 20700
• Maximum Working Pressure (psi): 3000

• Mount Hole Thread Gender: Female
• Mount Hole Thread Type: Metric

GG 255664

KIT, PLATEN, 55 GL, NEOPRENE

KIT INCLUDES: PLATE, WIPER 55GAL NEOPRENE [QTY. 1], KIT INCLUDES: FITTING, TEE, STREET [QTY. 2], FITTING, NIPPLE, HEX [QTY. 2], VALVE, PNEUMATIC, 3-WAY, N.C. [QTY. 2], VALVE, BALL, VENTED, .750 [QTY. 2], TUBING, NYLON, ROUND [QTY. 0.5 ], BUSHING, REDUCING [QTY. 4 ], FITTING, TUBE, QD [QTY. 2], FITTING, TUBE, QD ( 90 DEG SWIVEL) [QTY. 2], FITTING, TUBE, MALE (1/4 NPT) [QTY. 2], BRACKET, CORSSOVER, PAINTED 3 in. [QTY. 2], BRACKET, LIMIT VALVE [QTY. 2], WASHER, PLAIN [QTY. 4 ], SCREW, CAP, SCH [QTY. 4 ], WASHER, LOCK, #10 [QTY. 6 ], NUT, HEX MSCR [QTY. 4 ], VALVE, LIMIT, AIR [QTY. 2], WASHER, FLAT [QTY. 4 ], SCREW, CAP, SOCKET HD [QTY. 4 ], WASHER, LOCK, SPRING [QTY. 4 ], NUT, HEX MSCR [QTY. 4 ], WASHER, LOCK [QTY. 6 ], SCREW, CAP, SOCKET HEAD [QTY. 6 ], PLATE, MOUNTING, 4-WAY VALVE [QTY. 1], VALVE, AIR, REMOTE, 4 WAY [QTY. 1],

GG 256238

GG 256356

GG 256399

VALVE, PRESS,BLEED

Graco 256399 Pressure Bleed Valve for ProMix 2KS and 3KS Proportioner

GG 256239

GG 256410

GG 256390

HOSE, COUPLED

Graco 256390 25 ft (7.5 m) Air Hose

• Bleed Type: Bleeder
• Body Material: Plastic

• Compatible Material: Ceramics, Enamel, Fast-Set, High Solids, Solventborne, Waterborne

GG 256425

GG 256431

GG 256389

GG 256262

GG 256206

GG 256354

GG 256200

T1 PUMP

Graco 256200 T1 Supply Pump (Stainless Steel): 2:1 Fluid to Air Ratio

Gracos family of transfer pumps maintain performance in any environment. Transfer pumps are required to feed chemical to your Reactor spray machine or any other equipment requiring fluid transfer. Consider your material viscosities, desired output rate, interior ceiling height of your rig, and available air pressure when choosing your ideal transfer pump.

• Provide consistent feed pressures and flow rates for dependable results
• Lower pressure drops with higher viscosity materials at any ambient temperature
• Designed and manufactured by the worldwide leader in pump technology
• Quick-release bung adapter for easy drum removal without interference from hose connections
• Stainless steel wetted parts for corrosion-resistance
• PTFE seals for improved performance and less maintenance

• Model: T1

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Compatible Material: Polyurethane Foam, Polyurea

• Cycles Per Gallon: 40

• Fluid Outlet Size (in): 1/2
• Fluid Outlet Size (mm): 12.7
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Material: Stainless Steel

• Maximum Air Inlet Pressure (bar): 12.5
• Maximum Air Inlet Pressure (kPa): 1250
• Maximum Air Inlet Pressure (MPa): 1.2
• Maximum Air Inlet Pressure (psi): 180

• Maximum Continuous Cycle Rate (CPM): 100

• Maximum Flow Rate (GPM): 2.5
• Maximum Flow Rate (L/min): 9.5

• Maximum Operating Temperature ( degree C): 82
• Maximum Operating Temperature ( degree F): 180

• Maximum Working Pressure (bar): 25
• Maximum Working Pressure (kPa): 2500
• Maximum Working Pressure (MPa): 2.5
• Maximum Working Pressure (psi): 360

• Package Options: Bare

• Pump Ratio: 2:1

GG 256179

GG 256456

GG 256216

LDP5 VALVE, METERED, RIGID EXT

Graco 256216 LDP5 Electronic Preset Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - Trigger Guard and Swivel Cover Included - NPT

Gracos LDP5 meters are perfect for lower-volume service application in small service shops, fast lube centers and automotive dealerships. These meters are capable of metering petroleum, synthetic based oil and anti-freeze up to 5 gpm (19 lpm).

• Easy to read LCD screen keeps dispenses precise.
• Inlet 1/2 in. NPT with swivel.
• Rugged meter body is impact resistant for long life.
• Preset meter automatically shuts-off flow when preset quantity has been dispensed.
• 5 year warranty. See manufacturers website for details.

• Model: LDP5

• Approvals: CE

• Compatible Material: Oil, Antifreeze

• Dispense Type: Preset

• Display Type: Electronic

• Extension Type: Rigid

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Extension, Trigger Guard, Swivel Cover
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 5
• Maximum Flow Rate (L/min): 19

• Maximum Operating Temperature ( degree C): 49
• Maximum Operating Temperature ( degree F): 120

• Maximum Storage Temperature ( degree C): 49
• Maximum Storage Temperature ( degree F): 120

• Maximum Working Pressure (bar): 69
• Maximum Working Pressure (kPa): 6900
• Maximum Working Pressure (MPa): 7
• Maximum Working Pressure (psi): 1000
• Meter Accuracy (%): plus/minus 00.5

• Metering Gun Weight (kg): 1.36
• Metering Gun Weight (lb): 3

• Minimum Flow Rate (GPM): 0.1
• Minimum Flow Rate (L/min): 0.4

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Nozzle Type: Automatic

• Outlet Size (cm): 0.9525
• Outlet Size (in): 3/8
• Outlet Size (mm): 9.525
• Outlet Thread Type: NPT

• Overall Height (cm): 8.3
• Overall Height (in): 3.25
• Overall Height (mm): 83
• Overall Length (cm): 28
• Overall Length (in): 11
• Overall Length (mm): 280
• Overall Width (cm): 8.3
• Overall Width (in): 3.25
• Overall Width (mm): 83

• Recommended Environment: Indoor

GG 256292

GG 256290

VALVE,CLR/CAT CHG,LP,3-C LR

Graco 256290 3 Color Low Pressure Valve Stack, 4 Valves

GG 256457

GG 256459

GG 256385

GG 256460

GG 256219

GG 256463

GG 256462

GG 256466

GG 256464

GG 256486

MATRIX METER VALVE, 15, RIGID

Graco 256486 Matrix Electronic Dispense Meter, 14 gpm or Less, 1/2 in npt(f) swivel with rigid extension, high flow, quick-close nozzle for oil

Ultra-durable Matrix meters stand up to tough use, backed by a 7-year warranty (3 years on electronics). The keypad gives technicians control right from the meter, and dispense data can be associated with the work order for paperless transactions.

• Large LCD Display and Simple Operator Controls

  Adjusts for reading in all lighting conditions with easy set up and navigation.

  • Long Battery Life

    Uses four off-the-shelf batteries - no charging station needed.

    • Wireless Radio

      Built-in radio

      • Fluid Swivel

        1/2 inch NPT fluid inlet option meets standard and high-flow requirements

        
        

        • Approvals: FCC, Industry Canada (IC), C-Tick, CE
        • Compatible Material: Oil, ATF, Antifreeze
        • Extension Type: Rigid
        • Fluid Inlet Thread Gender: Female
        • Fluid Outlet Thread Gender: Female
        • Includes: Meter, Extension, Nozzle, Swivel Boot
        • Inlet Size (cm): 1.27
        • Inlet Size (in): 0.5
        • Inlet Size (mm): 12.7
        • Inlet Thread Type: NPT
        • Maximum Flow Rate (GPM): 14
        • Maximum Flow Rate (L/min): 53
        • Maximum Operating Temperature ( degree C): 70
        • Maximum Operating Temperature ( degree F): 158
        • Maximum Storage Temperature ( degree C): 70
        • Maximum Storage Temperature ( degree F): 158
        • Maximum Working Pressure (bar): 103.4
        • Maximum Working Pressure (kPa): 10300
        • Maximum Working Pressure (MPa): 10.3
        • Maximum Working Pressure (psi): 1500
        • Meter Accuracy (%): plus/minus 00.5
        • Meter Technology: Oval Gear
        • Metering Gun Weight (kg): 2.3
        • Metering Gun Weight (lb): 5
        • Minimum Flow Rate (GPM): 0.1
        • Minimum Flow Rate (L/min): 0.4
        • Minimum Operating Temperature ( degree C): -16
        • Minimum Operating Temperature ( degree F): 4
        • Nozzle Type: High Flow, Quick Close
        • Outlet Size (cm): 1.905
        • Outlet Size (in): 0.75
        • Outlet Size (mm): 19.05
        • Outlet Thread Type: Straight Thread O-Ring Boss
        • Overall Height (cm): 14.605
        • Overall Height (in): 5.75
        • Overall Height (mm): 146.05
        • Overall Length (cm): 33
        • Overall Length (in): 13
        • Overall Length (mm): 330
        • Overall Width (cm): 9.525
        • Overall Width (in): 3.75
        • Overall Width (mm): 95.25
        • Recommended Environment: Indoor

GG 256548

REACTOR HEATED HOSE, 3500, W/SCUFF, 1/2" , 50'

Graco 256548 50 ft (15 m) High Pressure Heated Hose with Thermocouple Scuff Guard and 1/2 in Inside Diameter

Graco's heated hoses are designed specifically for use with Reactor Equipment. Hoses are a key component to the total system, making it important to achieve accurate and uniform heating for the best application possible.

• New multi-strand copper heating element has greatly increased hose quality:

  Provides 10-times* the flex life compared to previous flat copper heating element

  Long-term, even heating without hot spots

  Backwards compatible with existing Reactor heated hoses

  • Copper-heated hoses are designed specifically for use with Graco proportioners
  • Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
  • Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
  • Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
  • Helix-design whip hose uses braided copper wires for added flexibility and longer life

  
  

  • Model: Reactor Heated Hoses
  • Series: Mesh Scuff
  • For Use With: Plural Component Proportioners
  • Hose Length (ft): 50
  • Hose Length (m): 15.2
  • Maximum Working Pressure (bar): 241
  • Maximum Working Pressure (kPa): 24100
  • Maximum Working Pressure (MPa): 24.1
  • Maximum Working Pressure (psi): 3500

GG 256494

GG 256560

GG 256577

KIT,TANK REFILL,PR70

Graco 256577 PR70 Tank Refill Kit

KIT INCLUDES: VALVE, ASSY, ON-BOARD TANK REFILL [QTY. 1], FITTING, BUSHING, 3/4NPT X 1/4NPT [QTY. 1], FITTING, ADAPTER, SWIVEL, 1/4NPT [QTY. 1], FITTING, ELBOW, 90, 1/4NPT, FF, 316SS [QTY. 1], FITTING, NIPPLE, HEX, 1/4X2.0, MM, SST [QTY. 1], CABLE, M8XM8, 4P, FXM, STXRT, 2M [QTY. 1], CABLE, M8, 4-PIN, MF, 3METER, MOLDED [QTY. 1]

GG 256596

KIT, 2 COLOR,CHANGE,HP

GG 256653

GG 256659

GG 256714

MONARK DRUM PUMP, 5:1, 1.5 F INLET

Graco 256714 5:1 Ratio Monark Pump with 1.5 in (38.1 mm) Female Inlet

Designed for high production applications, Monark pumps provide uniform and easily controlled delivery with its reliable Monark air motor.

• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Fluid return stanchion for circulation back to the pump
• Ultra High Molecular Weight Polyethylene (UHMWPE) packings for extended pump life in abrasive fluids

• Model: Monark

• Application: Bonding, Sealing, Gasketing, Potting, Encapsulation, Molding, Spray, Fluid Transfer, Unloading, Underfill

• Fluid Outlet Size (in): 3/4
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Material: Stainless Steel

• Maximum Air Consumption (SCFM): 8.2

• Maximum Flow Rate (GPM): 2.5
• Maximum Flow Rate (L/min): 9.5

• Maximum Working Pressure (bar): 62
• Maximum Working Pressure (kPa): 6200
• Maximum Working Pressure (MPa): 6.2
• Maximum Working Pressure (psi): 900

• Portable: Non-Portable

• Power Type: Pneumatic

• Pump Ratio: 5:1

GG 256773

GG 256793

GG 256866

KIT,COMPLETE SEAL, L100SS

KIT INCLUDES: PACKING, O-RING [QTY. 1], PACKING, O-RING, PTFE [QTY. 2], PACKING, VEE [QTY. 3], PACKING, VEE, PTFE [QTY. 2], GLAND, PACKING FEMALE [QTY. 1], GLAND, PACKING MALE [QTY. 1], PACKING, O-RING, PTFE [QTY. 1], PACKING, UHMWPE, CM450 [QTY. 2], GLAND, MALE FOOT VALVE [QTY. 1], GLAND, FEMALE FOOT VALVE [QTY. 1], BEARING, PISTON GUIDE CM100 [QTY. 1], PACKING, PFTE 100 [QTY. 2], SEAL, PISTON (4.5 CM) [QTY. 1], SEAL, VALVE [QTY. 1], SEAL, [QTY. 1]

GG 256875

GG 256869

GG 256960

GG 256957

KIT, REPAIR, CHECK VALVE COMPLETE

Graco 256957 Quickclean check valve assembly for HVLP

• Allows more air pressure into the material cup to spray heavier material
• Easily clean and reuse versus replace
• Located by gun to reduce clogged valves due to paint contamination

• Model: Graco

• For Use With: FinishPro HVLP Sprayers

GG 256994

VALVE,1 CLR/1 FLUSH LP STACK

Graco 256994 2 Valve, 1 Color Low Pressure Valve Stack

GG 257030

GTX SPRAYER, COMPRESSORLESS

Graco 257030 TexSpray GTX 2000EX Air-Powered Texture Sprayer with Graco Trigger Gun

A highly portable texture system for both smooth materials and those with fine aggregates, the GTX 2000EX is the ideal solution for drywall muds, deck coatings, and exterior aggregate acrylic and elastomeric finishes.

• Husky 1040 Double Diaphragm Pump
  

  Jobsite Proven Performance

  Texture delivery rates to 4.0 gpm from durable, high-output 1-inch pump

  Durable, User-Friendly Spraying

• Air Spray Heavy-Duty Trigger Gun
  

  Durable, User-Friendly Spraying

  Pump heavy mud mixes and larger aggregate with oversized fluid passages

  Quick nozzle changes with extra-coarse gun head threads

• Largest 17-Gallon (64 Liter) Capacity Hopper
  

  Longer Spray Time

  Easy cleanup and removal with no-tools

• Skip-Bond Material/Air Hose
  

  Improved Handling & Flexibility

  Both hoses are permanently bonded together for easy handling

  Oversized grip with no-tools hose connection

• On-Board Air Filtration
  

  Moisture Build-Up Eliminated

  Automatically filters air to keep your sprayer running at optimal performance

• Texture Applications
  

  Simulated Acoustic (Popcorn)

  Orange Peel & Fine Splatter

  Splatter

  Knockdown

  Textured Acrylics & Elastomerics

  EIFS & Synthetic Stucco Finish Coats

• Model: TexSpray GTX
• Series: 2000EX

• Compatible Material: Primers, Stains, Acrylics, Enamel, Latex, Interior Paint, Exterior Paint

• Features: Large Capacity Hopper, On-Board Air Filtration, Separate Pump/Gun Air Controls

• Includes: Heavy-Duty Air Spray Trigger Gun, 1 in x 25 ft Bonded Materia/Airl Hose, 3 mm, 4 mm, 6 mm, 8 mm, 10 mm, 12 mm Nozzles

• Maximum Flow Rate (GPM): 4.0
• Maximum Flow Rate (L/min): 15.1

• Maximum Hose Length (ft): 100
• Maximum Hose Length (m): 30

• Maximum Working Pressure (bar): 227
• Maximum Working Pressure (kg/cm 2): 22.7
• Maximum Working Pressure (kPa): 2270
• Maximum Working Pressure (MPa): 0.8
• Maximum Working Pressure (psi): 3300

• Minimum Generator Power (W): 5000

• Motor Type: Brushless DC

• Number of Guns: 1

• Outlet Paint Filter: 60 Mesh Stainless Steel Screen

• Overall Length (cm): 66
• Overall Length (in): 22
• Overall Length (mm): 558.8
• Overall Width (cm): 61
• Overall Width (in): 24.0340
• Overall Width (mm): 610.4636

• Phase: 1

• Power Rating (HP): 2.2
• Power Rating (kW): 1.65
• Power Source: Air

GG 257147

GG 257159

GG 257351

GG 257373

GG 257419

GG 257420

GG 257421

GG 257423

GG XHD815

XHD RAC TIP, SPRAY, CYLINDER, 815

Graco XHD815 XHD RAC SwitchTip, .815

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.24
• Maximum Flow Rate (L/min): 0.91

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.015

GG XHD771

XHD RAC TIP, SPRAY, CYLINDER, 771

Graco XHD771 XHD RAC SwitchTip, .771

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 40.6
• Maximum Fan Width (in): 16
• Maximum Fan Width (mm): 406

• Maximum Flow Rate (GPM): 5.41
• Maximum Flow Rate (L/min): 20.48

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 14
• Minimum Fan Width (mm): 356

• Orifice Diameter (in): 0.071

GG XHD817

XHD RAC TIP, SPRAY, CYLINDER, 817

Graco XHD817 XHD RAC SwitchTip, .817

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.31
• Maximum Flow Rate (L/min): 1.17

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.017

GG XHD819

XHD RAC TIP, SPRAY, CYLINDER, 819

Graco XHD819 XHD RAC SwitchTip, .819

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.38
• Maximum Flow Rate (L/min): 1.44

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.019

GG XHD821

XHD RAC TIP, SPRAY, CYLINDER, 821

Graco XHD821 XHD RAC SwitchTip, .821

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.47
• Maximum Flow Rate (L/min): 1.78

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.021

GG XHD825

XHD RAC TIP, SPRAY, CYLINDER, 825

Graco XHD825 XHD RAC SwitchTip, .825

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.67
• Maximum Flow Rate (L/min): 2.54

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.025

GG XHD827

XHD RAC TIP, SPRAY, CYLINDER, 827

Graco XHD827 XHD RAC SwitchTip, .827

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 0.74
• Maximum Flow Rate (L/min): 2.80

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.027

GG XHD831

XHD RAC TIP, SPRAY, CYLINDER, 831

Graco XHD831 XHD RAC SwitchTip, .831

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 1.03
• Maximum Flow Rate (L/min): 3.90

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.031

GG XHD861

XHD RAC TIP, SPRAY, CYLINDER, 861

Graco XHD861 XHD RAC SwitchTip, .861

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 4.00
• Maximum Flow Rate (L/min): 15.14

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.061

GG XHD867

XHD RAC TIP, SPRAY, CYLINDER, 867

Graco XHD867 XHD RAC SwitchTip, .867

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 45.7
• Maximum Fan Width (in): 18
• Maximum Fan Width (mm): 457

• Maximum Flow Rate (GPM): 4.82
• Maximum Flow Rate (L/min): 18.25

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 16
• Minimum Fan Width (mm): 406

• Orifice Diameter (in): 0.067

GG XHD923

XHD RAC TIP, SPRAY, CYLINDER, 923

Graco XHD923 XHD RAC SwitchTip, .923

With its Reverse-A-Clean (RAC) Tip, it's easy to clear clogs. The Switch Tip design lets you change tip sizes in seconds - without removing the tip guard and housing.

• Saves time - no screwdriver required, change tip sizes in seconds
• For heavy-duty applications up to 7250 psi (500 bar)
• Recommended for use with Xtreme Sprayers and XTR Guns

• Model: XHD RAC
• Series: SwitchTip

• Compatible Material: Solvent borne Paints, Water-Based Paint

• For Use With: Xtreme Sprayers, XTR Airless Spray Guns

• Maximum Fan Width (cm): 50.8
• Maximum Fan Width (in): 20
• Maximum Fan Width (mm): 508

• Maximum Flow Rate (GPM): 0.57
• Maximum Flow Rate (L/min): 2.16

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (kPa): 50000
• Maximum Working Pressure (psi): 7250

• Minimum Fan Width (in): 18
• Minimum Fan Width (mm): 457

• Orifice Diameter (in): 0.023

GG XL34L0

gg XL65D0

GG XM5N00

XM SPRAYER SYSTEM, XM50, R, IS

Graco XM5N00 XM50 System, Hazardous Location, 240V, Alternator Power, No Heaters, No Junction Box, No Feed System, Remote Manifold

Engineered to handle the toughest protective coatings, the Graco XM plural-component sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

• Variable ratio system - handles material ratios from 1:1 to 10:1
• Dosing technology assures accurate, on-ratio mixing for better yield and less waste
• Advanced, intuitive user controls provide real-time display and adjustment of ratio
• Supports multiple spray guns for added productivity

• Model: XM
• Series: 50

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Maximum Air Consumption (m3/min): 1.96 m3/min per lpm at 100psi
• Maximum Air Consumption (SCFM): 70 scfm/gpm at 100psi
• Maximum Air Inlet Pressure (bar): 10.3
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.4

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Mix Ratio: 10:1

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Working Pressure (bar): 358
• Maximum Working Pressure (MPa): 35.8
• Maximum Working Pressure (psi): 5200

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Mix Ratio: 1:1

• Mix Accuracy (%): 5%

• Power Source: Alternator

• Primary Fluid Heater Included: No

GG XM7H2E

XM SPRAYER SYSTEM, XM70, R, 480, JB, WP, 25, E

Graco XM7H2E XM70, 480V, Wall Power, Viscon HF Heaters, Junction Box, Heated Tanks, Agitators, Feed Pumps, Remote, Electric Heated Hose Control

Engineered to handle the toughest protective coatings, the Graco XM plural-component sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

• Variable ratio system - handles material ratios from 1:1 to 10:1
• Dosing technology assures accurate, on-ratio mixing for better yield and less waste
• Advanced, intuitive user controls provide real-time display and adjustment of ratio
• Supports multiple spray guns for added productivity

• Model: XM
• Series: 70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Maximum Air Consumption (m3/min): 1.96 m3/min per lpm at 100psi
• Maximum Air Consumption (SCFM): 70 scfm/gpm at 100psi
• Maximum Air Inlet Pressure (bar): 10.3
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.4

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Mix Ratio: 10:1

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Working Pressure (bar): 435
• Maximum Working Pressure (MPa): 43.5
• Maximum Working Pressure (psi): 6300

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Mix Ratio: 1:1

• Mix Accuracy (%): 5%

• Power Source: Wall

• Primary Fluid Heater Included: Yes

GG XM7K2E

XM SPRAYER SYSTEM, XM70, R, 480, JB, IS, 25, E

Graco XM7K2E XM70, 480V, Alternator, EX Viscon HF Heaters, EX Junction Box, Heated Tanks, Agitators, Feed Pumps, Remote, Electric Hose Control

Engineered to handle the toughest protective coatings, the Graco XM plural-component sprayer provides precise ratio control, allows users to download historical spraying data, and handles a wide range of two-component materials.

• Variable ratio system - handles material ratios from 1:1 to 10:1
• Dosing technology assures accurate, on-ratio mixing for better yield and less waste
• Advanced, intuitive user controls provide real-time display and adjustment of ratio
• Supports multiple spray guns for added productivity

• Model: XM
• Series: 70

• Air Inlet Size (in): 3/4
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Fluid Inlet Size (in): 1-1/4
• Fluid Inlet Thread Gender: Male
• Fluid Inlet Thread Type: NPT

• Maximum Air Consumption (m3/min): 1.96 m3/min per lpm at 100psi
• Maximum Air Consumption (SCFM): 70 scfm/gpm at 100psi
• Maximum Air Inlet Pressure (bar): 10.3
• Maximum Air Inlet Pressure (psi): 150

• Maximum Flow Rate (GPM): 3
• Maximum Flow Rate (L/min): 11.4

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Fluid Temperature ( degree C): 71
• Maximum Fluid Temperature ( degree F): 160
• Maximum Fluid Viscosity (cP): 20000

• Maximum Mix Ratio: 10:1

• Maximum Operating Temperature ( degree C): 54
• Maximum Operating Temperature ( degree F): 130

• Maximum Working Pressure (bar): 435
• Maximum Working Pressure (MPa): 43.5
• Maximum Working Pressure (psi): 6300

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Mix Ratio: 1:1

• Mix Accuracy (%): 5%

• Power Source: Alternator

• Primary Fluid Heater Included: Yes

GG XNL65D

XDX SERIES 20 REEL, HOSE

Graco XNL65D XDX 20, Air/Water/Antifreeze/WWS, 1/2 in (13 mm) Inlet, 1/2 in X 50 ft (13 mm X 15 m) Hose, NPT, No Guide Arms, Black

Graco's heavy-duty XDX hose reel features a heavy-gauge, robust, dual-pedestal metal frame, steel spool, sealed components and innovative swivel design for high-quality performance in the most demanding applications.

• Spring Adjustment - Increase or decrease spring tension while reel is pressurized with fluid
• Full-Flow Swivel - Maximize material flow with minimal pressure drop for faster fills to get more vehicles through your shop
• Optional Adjustable Arm - Easily change the arm position for your application, order with arm (XD models) or without (XN models)
• Large Hose Capacity with Small Profile - Compact pedestal and spool fits into tight spaces and can accommodate 35-65 foot (107-198 meters) hose capacity for a wide variety of applications

• Series: 20

• Application: Air, Water, Antifreeze, WWS

• Color: Black

• Dry Weight (lb): 64

• Frame Type: Dual Pedestal

• Hose Inside Diameter (in): 1/2
• Hose Inside Diameter (mm): 12.7
• Hose Length (ft): 75
• Hose Length (m): 23

• Hose Reel Type: Reel with Hose
• Includes Hose: Yes
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Gender: Male
• Inlet Thread Type: NPSM

• Maximum Temperature ( degree C): 87
• Maximum Temperature ( degree F): 190

• Maximum Working Pressure (psi): 300

• Outlet Size (in): 1/2
• Outlet Size (mm): 12.7
• Outlet Thread Gender: Male
• Outlet Thread Type: NPT

• Overall Height (in): 25.2
• Overall Height (mm): 640
• Overall Length (in): 21
• Overall Length (mm): 533
• Overall Width (in): 7.5
• Overall Width (mm): 191

• Recommended Environment: Indoor, Outdoor
• Recommended Fluid Type: Air, Water, Antifreeze, WWS

GG XR2323

GG XTR521

XTR+ GUN, XTR5+, 1" HND, 4FNG, FLAT TIP

Graco XTR521 XTR5+ Airless Spray Gun, Round Handle, 4-Finger Trigger, Flat Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• Flat tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

GG XTR522

XTR+ GUN, XTR5+, OVL HND, 4FNG, XHDRAC

Graco XTR522 XTR5+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

GG XTR523

XTR+ GUN, XTR5+, OVL HND, 2FNG, XHDRAC

Graco XTR523 XTR5+ Airless Spray Gun, Insulated Handle, 2-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

GG XTR524

XTR+ GUN, XTR5+, 1" HND, 4FNG, XHDRAC

Graco XTR524 XTR5+ Airless Spray Gun, Round Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR5+

• Maximum Working Pressure (bar): 345
• Maximum Working Pressure (MPa): 34.5
• Maximum Working Pressure (psi): 5000

GG XTR530

GG XTR724

XTR+ GUN, XTR7+, 1" HND, 4FNG, XHDRAC

Graco XTR724 XTR7+ Airless Spray Gun, Round Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG XTR712

XTR+ GUN, XTR7-HF, OVHND, 4FNG, XHDRAC

Graco XTR712 XTR7+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, you'll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR7+

GG XTR720

XTR+ GUN, XTR7+, 1" HND, 4FNG, NO TIP

Graco XTR720 XTR7+ Airless Spray Gun, Round Handle, 4-Finger Trigger, No Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD Tip Guard compatible with XHD RAC tips
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG XTR722

XTR+ GUN, XTR7+, OVL HND, 4FNG, XHDRAC

Graco XTR722 XTR7+ Airless Spray Gun, Insulated Handle, 4-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench
• Insulated handle for sprayer comfort

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG XTR721

XTR+ GUN, XTR7+, 1" HND, 4FNG, FLT TIP

Graco XTR721 XTR7+ Airless Spray Gun, Round Handle, 4-Finger Trigger, Flat Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• Flat tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250

GG XTR725

XTR+ GUN, XTR7+, 1" HND, 2FNG, XHDRAC

Graco XTR725 XTR7+ Airless Spray Gun, Round Handle, 2-Finger Trigger, XHD RAC Tip

New look. New features. A self-locking needle design offers unmatched ease of breaking down for cleaning or rebuilds. Paired with a new look, youll never think twice about grabbing the correctly pressure rated XTR+ gun for your Graco sprayer.

• Self-locking needle design for faster rebuilds
• XHD RAC tip provides exceptional life, pattern and finish
• Easily remove and clean gun filter with trigger guard integrated wrench

• Model: XTR7+

• Maximum Working Pressure (bar): 500
• Maximum Working Pressure (MPa): 50
• Maximum Working Pressure (psi): 7250