GRACO INC. S10595

GG 24T843

GG 24T847

KIT, O-RING, LP

GG 24T862

GG 24T894

VALVE, CHECK, 316 SST

Graco 24T894 Check Valve, 316 Stainless Steel

• Compatible Material: Solventborne, High Solids, Xirallic, Metallics, Varnish, CARC

GG 24T895

KIT, SOFT PARTS, 35CC

Graco 24T895 35 cc Lower Seal Repair Kit for ProMix PD2K Electronic Positive Displacement Proportioning System Dosing Pumps, no tools included

GG 24T896

KIT, SOFT PARTS, 70CC

Graco 24T896 70 cc Lower 24T793 Repair Kit for ProMix PD2K Electronic Positive Displacement Proportioning System Dosing Pumps

• Bleed Type: Non-Bleeder

• Compatible Material: Lacquer, Latex, Plural Component Materials, Polyurethane, Solventborne, Urethane, UV Coating, Varnish, Waterborne

GG 24T961

GG 25C005

GG 25C157

KIT, FLANGE, SOLOTECH 30, BUNA

Graco 25C157 Kit, Flange to 1-1/4 Inch NPT Adapter, Buna Gasket

GG 25C187

GG 25C210

GG 25C212

GG 25C213

GG 25C281

GG 25C221

GG 25C418

SANIFORCE DRUM PUMP, 3A, 47" , 115V

Graco 25C418 Sanitary Progressive Cavity Drum Pump System with 115 Volt Variable Speed Motor and 47 inch Lower

Reduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, no moving parts and easy transferability.

• Easy Cleaning and Product Changeover

  With this simple knock down design, cleaning between drums or product changeovers has never been easier!

  • Operational Flexibility Throughout Your Facility

    With the electric pump operation, you simply plug it in to be ready for transfer in minutes!

    • Easy Mobility

      The light weight design allows all operators to move pumps between drums to increase facility output.

      • Certified to FDA standards
      • Simple design to facilitate easy cleaning and reduce maintenance and downtime
      • Flow rates up to 35 GPM (132 LPM) with a smooth output of material
      • Easily transferable from container to container and adaptable to drums, totes and kettles

      
      

      • Fluid Outlet Size (cm): 3.81
      • Fluid Outlet Size (in): 1-1/2
      • Fluid Outlet Size (mm): 38.1
      • Maximum Working Pressure (bar): 3
      • Maximum Working Pressure (kPa): 296
      • Maximum Working Pressure (psi): 43

GG 25C420

SANIFORCE DRUM PUMP, PC , 39" , 115V

Graco 25C420 Sanitary Progressive Cavity Drum Pump System with 115 Volt Variable Speed Motor and 39 Inch Lower

Reduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, minimal moving parts and easy transferability.

• Powered by variable speed electric motor
• Certified to FDA standards
• Simple design to facilitate easy cleaning and reduce maintenance and downtime
• Easily transferable from container to container and adaptable to drums, totes and kettles

• Fluid Outlet Size (cm): 3.81
• Fluid Outlet Size (in): 1.5
• Fluid Outlet Size (mm): 38.1

• Maximum Working Pressure (bar): 6
• Maximum Working Pressure (kPa): 600
• Maximum Working Pressure (MPa): 0.6
• Maximum Working Pressure (psi): 87

GG 25C450

MODULE,GCA,ADM

GG 25C451

AGITATOR, BACK GEAR, SIPHON

Graco 25C451 Electric Back Gear Drum Agitator with drum cover, elevator, siphon, shaft and blades, UL

Heavy-duty, electric, back-geared agitator (UL listed) mixes and maintains suspension of industrial coatings stored in 55 gallon (208 liter) drums.

• Electric agitators are up to 5 times more efficient than pneumatic agitators.
• Speed remains constant, regardless of material level in tank.
• Quiet motor improves work environment with a sound pressure level of less than 75 dBA at 30 rpm.

• For Use With: 55 Gallon (208 Liter) Drum

• Includes: Drum Cover, Elevator, Siphon, Shaft, Blade

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Speed (RPM): 50

• Maximum Viscosity (cP): 3000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: Electric

• Power Rating (HP): 0.75
• Power Rating (kW): 0.37

GG 25C454

AGITATOR, ASSY, DIRECT DRIVE

Graco 25C454 7.5 in OD Flange Mount Agitator Motor (3 in 150# ANSI Flange Mounting Holes), UL

Low shear, electric, direct drive agitator mixes and maintains suspension of industrial coatings stored in fluid tanks.

• Electric agitators are up to 5 times more efficient than pneumatic agitators.
• Speed remains constant, regardless of material level in tank.
• Low shear mixing ensures uniform particle dispersion without material degradation.

• For Use With: Drum or Pressure Tank

• Includes: Motor, Flange

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 300

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: Electric

• Power Rating (HP): 0.75
• Power Rating (kW): 0.37

GG 25C462

AGITATOR, ASSY, PRESSURE TANK 5 GAL

Graco 25C462 Pressure Tank Agitator Assembly, 5 gallon (19 L), UL

Low shear, electric, direct drive agitator mixes and maintains suspension of industrial coatings stored in fluid tanks.

• Electric agitators are up to 5 times more efficient than pneumatic agitators.
• Speed remains constant, regardless of material level in tank.
• Low shear mixing ensures uniform particle dispersion without material degradation.

• For Use With: 5 Gallon (19 Litre) Pressure Tank

• Includes: Shaft, Impeller

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 300

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: Electric

• Power Rating (HP): 0.75
• Power Rating (kW): 0.37

GG 25C471

AGITATOR, ASSY, PRESSURE TANK, 15 GAL

Graco 25C471 Pressure Tank Agitator Assembly, 15 gallon (56 L), UL

Low shear, electric, direct drive agitator (UL listed) mixes and maintains suspension of industrial coatings stored in fluid tanks. This model includes a shaft and impeller, but no pressure tank. It can replace existing air motor driven pressure tank agitators.

• Electric agitators are up to 5 times more efficient than pneumatic agitators.
• Speed remains constant, regardless of material level in tank.
• Low shear mixing ensures uniform particle dispersion without material degradation.

• For Use With: 15 Gallon (57 Litre) Pressure Tank

• Includes: Shaft, Impeller

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 300

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: Electric

• Power Rating (HP): 0.75
• Power Rating (kW): 0.37

GG 25C411

SANIFORCE DRUM PUMP, CENT , FDA, 39" , 115V

Graco 25C411 115 VAC Variable Speed Centrifugal Drum Pump System with North American Plug Style, and 39 inch Lower

Reduce maintenance and sanitization time at your facility with the SaniForce Drum Pump, designed for easy cleaning with quick tri-clamp connections, no moving parts and easy transferability.

• Easy Cleaning and Product Changeover
  • With this simple knock down design, cleaning between drums or product changeovers has never been easier!
• Operational Flexibility Throughout Your Facility
  • With the electric pump operation, you simply plug it in to be ready for transfer in minutes!
• Easy Mobility
  • The light weight design allows all operators to move pumps between drums to increase facility output.
• Simple design to facilitate easy cleaning and reduce maintenance and downtime
• Flow rates up to 35 GPM (132 LPM) with a smooth output of material
• Easily transferable from container to container and adaptable to drums, totes and kettles

• Fluid Outlet Size (cm): 3.81
• Fluid Outlet Size (in): 1-1/2
• Fluid Outlet Size (mm): 38.1

• Maximum Flow Rate (GPM): 35
• Maximum Flow Rate (L/min): 132

• Maximum Working Pressure (bar): 3
• Maximum Working Pressure (kPa): 296
• Maximum Working Pressure (psi): 43

GG 25C468

GG 25C486

AGITATOR, BACK GEAR, SIPHON

Graco 25C486 Electric Back Gear Drum Agitator with siphon, shaft and blades, UL, drum cover and elevator not included

Heavy-duty, electric, back-geared agitator (UL listed) mixes and maintains suspension of industrial coatings stored in 55 gallon (208 liter) drums.

• Drum cover and elevator are not included.
• Speed remains constant, regardless of material level in tank.
• Quiet electric motor improves work environment.
• drum cover and elevator not included

• For Use With: 55 Gallon (208 Liter) Drum

• Includes: Siphon, Shaft, Blade

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Speed (RPM): 50

• Maximum Viscosity (cP): 3000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: Electric

• Power Rating (HP): 0.75
• Power Rating (kW): 0.37

GG 25C536

TANK, HIGH PRESS, AGIT 5 GAL

Graco 25C536 Agitator with pressure tank, 5 gallon (19 L)

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Use less compressed air than most rotary vane air motors.
• Install quickly and operate quietly.
• Maintain easily - air line lubrication not required.
• Control speed with Gracos Intelligent Paint Kitchen (IPK).
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Includes: 5 Gallon Pressure Tank

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Speed (RPM): 150

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Motor Type: Pneumatic - Radial Piston

GG 25C659

GG 25C658

GG 25C554

GG 25C527

GG 25C528

AGITATOR, DIRECT DRIVE, SST

Graco 25C528 Stainless Steel Direct Drive, 30/55 gallon (113.5/208 litres), 1 stainless steel 5.5-inch (14 cm) propeller

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Agitator mounts directly to mix tank or drum cover and rotates clockwise
• Dual propeller ensures efficient and thorough mixing
• Easy adjustment knob fine-tunes agitator speed to ideal mixing parameters
• Control speed with Gracos Intelligent Paint Kitchen (IPK)
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C535

AGITATOR, HELIX, CS

Graco 25C535 Carbon Steel Direct Drive, helix, bung mount

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Recommended agitator rotation: Clockwise
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
• Maximum allowable process fluid temperature: 158 degree F (70 degree C)

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C529

AGITATOR, AIR, OUTBOARD

Graco 25C529 Carbon Steel Direct Drive, 55 gallon (208 L), side mount, 2 aluminum 5.5-inch (14 cm) propellers

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Recommended agitator rotation: Clockwise
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C530

AGITATOR, EXPANDING BLADE

Graco 25C530 Stainless Steel Direct Drive, 55 gallon (208 L), bung mount, expanding blade

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Recommended agitator rotation: Counter clockwise
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
• Bung adapter sizes: 1 1/2 - 11.5 npsm and 2 - 11.5 npsm

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C485

AGITATOR, BACK GEAR

Graco 25C485 Electric Back Gear Drum Agitator with shaft and blades, UL, drum cover and elevator not included

Heavy-duty, electric, back-geared agitator (UL listed) mixes and maintains suspension of industrial coatings stored in 55 gallon (208 liter) drums.

• Drum cover and elevator are not included.
• Speed remains constant, regardless of material level in tank.
• Quiet electric motor improves work environment.
• drum cover and elevator not included

• For Use With: 55 Gallon (208 Liter) Drum

• Includes: Shaft, Blade

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Speed (RPM): 50

• Maximum Viscosity (cP): 3000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: Electric

• Power Rating (HP): 0.75
• Power Rating (kW): 0.37

GG 25C532

AGITATOR, SIPHON TWISTORK

Graco 25C532 Twistork Helix Mixer with suction feature - stainless steel, bung mount, belt drive

Rotate agitator clockwise or counter clockwise for optimal mixing.

• Radial piston air driven motor uses less compressed air than most rotary vane air motors.
• Install quickly and operate quietly.
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Model: Twistork

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• For Use With: Closed-head, Bung-type, 55 Gallon (208 Liter) Drum

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C538

TANK, HIGH PRESS, AGIT 15 GAL

Graco 25C538 Agitator with pressure tank, 15 gallon (58 L)

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Use less compressed air than most rotary vane air motors.
• Install quickly and operate quietly.
• Maintain easily - air line lubrication not required.
• Control speed with Gracos Intelligent Paint Kitchen (IPK).
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Includes: 15 Gallon Pressure Tank

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Speed (RPM): 150

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Motor Type: Pneumatic - Radial Piston

GG 25C662

KIT,LIGHT TOWER

Graco 25C662 Light Tower Kit

GG 25C487

AGITATOR, BACK GEAR, ATEX

Graco 25C487 Electric Back Gear Drum Agitator with shaft and blades, ATEX, drum cover and elevator not included

Heavy-duty, electric, back-geared agitator (ATEX) mixes and maintains suspension of industrial coatings stored in 55 gallon (208 liter) drums.

• Drum cover and elevator are not included.
• Speed remains constant, regardless of material level in tank.
• Quiet electric motor improves work environment.
• drum cover and elevator not included

• For Use With: 55 Gallon (208 Liter) Drum

• Includes: Shaft, Blade

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Speed (RPM): 50

• Maximum Viscosity (cP): 3000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: Electric

• Power Rating (HP): 0.75
• Power Rating (kW): 0.37

GG 25C534

AGITATOR, HELIX, SST

Graco 25C534 Stainless Steel Direct Drive, helix, bung mount

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Recommended agitator rotation: Clockwise
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA
• Maximum allowable process fluid temperature: 158 degree F (70 degree C)

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C539

AGITATOR, HEAVY DUTY, 5 GAL

Graco 25C539 Agitator for a 5 gallon (19 L) tank, pressure tank not included

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Use less compressed air than most rotary vane air motors.
• Install quickly and operate quietly.
• Maintain easily - air line lubrication not required.
• Control speed with Graco's Intelligent Paint Kitchen (IPK).
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• For Use With: 5 Gallon (19 Litre) Pressure Tank

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 150

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C537

TANK, HIGH PRESS, AGIT 10 GAL

Graco 25C537 Agitator with pressure tank, 10 gallon (28 L)

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Use less compressed air than most rotary vane air motors.
• Install quickly and operate quietly.
• Maintain easily - air line lubrication not required.
• Control speed with Gracos Intelligent Paint Kitchen (IPK).
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Includes: 10 Gallon Pressure Tank

• Maximum Air Inlet Pressure (bar): 7
• Maximum Air Inlet Pressure (kPa): 700
• Maximum Air Inlet Pressure (psi): 100

• Maximum Speed (RPM): 150

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 7
• Maximum Working Pressure (kPa): 700
• Maximum Working Pressure (psi): 100

• Motor Type: Pneumatic - Radial Piston

GG 25C533

AGITATOR, DIRECT DRIVE, CS

Graco 25C533 Carbon Steel Direct Drive, 30/55 gallon, 2 aluminum 5.5-inch (14 cm) propellers

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Agitator mounts directly to mix tank or drum cover and rotates clockwise
• Dual propeller ensures efficient and thorough mixing
• Easy adjustment knob fine-tunes agitator speed to ideal mixing parameters
• Control speed with Gracos Intelligent Paint Kitchen (IPK)
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 1000

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C473

AGITATOR, ASSY, PRES TANK, 15 GAL, ATEX

Graco 25C473 Pressure Tank Agitator Assembly, 15 gallon (56 L), ATEX

Low shear, electric, direct drive agitator mixes and maintains suspension of industrial coatings stored in fluid tanks.

• Electric agitators are up to 5 times more efficient than pneumatic agitators.
• Speed remains constant, regardless of material level in tank.
• Low shear mixing ensures uniform particle dispersion without material degradation.

• For Use With: 15 Gallon (57 Litre) Pressure Tank

• Includes: Shaft, Impeller

• Maximum Operating Temperature ( degree C): 40
• Maximum Operating Temperature ( degree F): 104

• Maximum Speed (RPM): 500

• Maximum Viscosity (cP): 300

• Minimum Operating Temperature ( degree C): 0
• Minimum Operating Temperature ( degree F): 32

• Motor Type: Electric

• Power Rating (HP): 0.75
• Power Rating (kW): 0.37

GG 25C549

GG 25C764

GG 25C782

GG 25C765

KIT, MOTOR, RADIAL PISTON AIR

Graco 25C765 Radial Piston Air Motor Kit

Radial piston air motor driven agitators are reliable, simple and cost-effective solutions for low to medium speed (<500 rpm), low to medium viscosity (<1000 cp) agitation applications.

• Install quickly and operate quietly.
• Use less compressed air than most rotary vane air motors.
• Sound pressure level at 70 psig (maximum recommended speed): Less than 75 dBA

• Air Inlet Size (cm): 0.635
• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Type: NPT

• Maximum Air Inlet Pressure (bar): 5
• Maximum Air Inlet Pressure (kPa): 500
• Maximum Air Inlet Pressure (psi): 70

• Maximum Speed (RPM): 500

• Maximum Working Pressure (bar): 5
• Maximum Working Pressure (kPa): 500
• Maximum Working Pressure (psi): 70

• Motor Type: Pneumatic - Radial Piston

GG 25C841

METER, ELECTRONIC, IM20, 3/4 NPT

Graco 25C841 IM20 Med/High Pressure, Med/High Flow In-Line Meter for Petroleum- and Synthetic-Based Oils and Antifreeze

Gracos IM20 in-line meter is designed to last and is capable of measuring a variety of fluids up to 20 gpm (75.7 lpm) flow rates. The IM20 is backed by our robust warranty and features upgraded electronics and an easy-to-read LCD screen with simple operator controls that measures in quarts, gallons, pints and liters.

• High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
• Proven in Harsh Conditions - IP69K-rated meter. Electronics are safe from pressure washing and dusty environments.
• Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.

• Model: IM20

• For Use With: Petroleum-Based Oils, Synthetic-Based Oils, Antifreeze

• Inlet Size (cm): 1.905
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: NPT

• Maximum Flow Rate (GPM): 20

• Maximum Working Pressure (bar): 103
• Maximum Working Pressure (kPa): 10300
• Maximum Working Pressure (MPa): 10.3
• Maximum Working Pressure (psi): 1500

• Minimum Flow Rate (GPM): 0.25

• Outlet Size (cm): 1.905
• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05
• Outlet Thread Type: NPT

GG 25C818

KIT, SEAT 1050M SS

Graco 25C818 1-inch 316 Stainless Steel Seat Kit

GG 25C861

LSR SYSTEM, 1:1 EXTRUDER, 5/5GAL

Graco 25C861 1:1 Extruder, Stainless Steel, for Liquid Silicone Rubber

Application:

• Reduces material costs
• Saves money by using less clean-up solvent
• Provides consistent material quality

• Model: LSR

• Air Inlet Size (in): 1/2
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Maximum Working Pressure (bar): 3000
• Maximum Working Pressure (kPa): 30000
• Maximum Working Pressure (psi): 3000

• Overall Depth (cm): 64.0080
• Overall Depth (in): 25.2
• Overall Depth (mm): 640

• Overall Height (cm): 173.7360
• Overall Height (in): 68.4
• Overall Height (mm): 1737
• Overall Width (cm): 106.6800
• Overall Width (in): 42
• Overall Width (mm): 1067

GG 25C863

GG 25C904

EM SERIES EM8 VALVE, FLEX EXT, 1/2in NPT

Graco 25C904 EM8 Electronic Manual Oil/Antifreeze Meter - Flexible Extension - 1/2 in. (13 mm) Inlet - NPT

EM Series handheld and in-line meters are designed to last - from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco's EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.

• Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
• High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
• Legacy Valve - 1/2 inch (13 mm) inlet, compatible with oil and Antifreeze.
• Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
• Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.

• Model: EM8
• Series: A

• Approvals: CE

• Calibration Type: Factory Calibrated

• Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze

• Display Type: Electronic

• Extension Type: Flexible

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Extension
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• IP Rating: 69K

• Maximum Flow Rate (cc/min): 30283

• Maximum Flow Rate (cc/sec): 505
• Maximum Flow Rate (GPM): 8
• Maximum Flow Rate (L/min): 30.3

• Maximum Operating Temperature ( degree C): 82
• Maximum Operating Temperature ( degree F): 180

• Maximum Recorded Dispense: 19999

• Maximum Storage Temperature ( degree C): 85
• Maximum Storage Temperature ( degree F): 185

• Maximum Totalizer: 19999

• Maximum Working Pressure (bar): 102
• Maximum Working Pressure (kPa): 10200
• Maximum Working Pressure (MPa): 10.2
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Pressure Loss (bar): 2.1 Bar at 6 GPM
• Meter Pressure Loss (psi): 30 PSI at 6 GPM
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 1.36
• Metering Gun Weight (lb): 3

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Operating Temperature ( degree C): -30
• Minimum Operating Temperature ( degree F): -22

• Nozzle Type: Manual

• Outlet Size (cm): 1.905
• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05
• Outlet Thread Type: ORB

• Overall Height (cm): 13.3
• Overall Height (in): 5.25
• Overall Height (mm): 133
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9
• Overall Width (in): 3.5
• Overall Width (mm): 90

• Recommended Environment: Indoor/Outdoor

GG 25C903

EM SERIES EM8 VALVE, RIGID EXT, 1/2in NPT

Graco 25C903 EM8 Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT

EM Series handheld and in-line meters are designed to last - from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco's EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.

• Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
• High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
• Legacy Valve - 1/2 inch (13 mm) inlet, compatible with oil and Antifreeze.
• Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
• Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.

• Model: EM8
• Series: A

• Approvals: CE

• Calibration Type: Factory Calibrated

• Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze

• Display Type: Electronic

• Extension Type: Rigid

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Extension
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• IP Rating: 69K

• Maximum Flow Rate (cc/min): 30283

• Maximum Flow Rate (cc/sec): 505
• Maximum Flow Rate (GPM): 8
• Maximum Flow Rate (L/min): 30.3

• Maximum Operating Temperature ( degree C): 82
• Maximum Operating Temperature ( degree F): 180

• Maximum Recorded Dispense: 19999

• Maximum Storage Temperature ( degree C): 85
• Maximum Storage Temperature ( degree F): 185

• Maximum Totalizer: 19999

• Maximum Working Pressure (bar): 102
• Maximum Working Pressure (kPa): 10200
• Maximum Working Pressure (MPa): 10.2
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Pressure Loss (bar): 2.1 Bar at 6 GPM
• Meter Pressure Loss (psi): 30 PSI at 6 GPM
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 1.36
• Metering Gun Weight (lb): 3

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Operating Temperature ( degree C): -30
• Minimum Operating Temperature ( degree F): -22

• Nozzle Type: Manual

• Outlet Size (cm): 1.905
• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05
• Outlet Thread Type: ORB

• Overall Height (cm): 13.3
• Overall Height (in): 5.25
• Overall Height (mm): 133
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9
• Overall Width (in): 3.5
• Overall Width (mm): 90

• Recommended Environment: Indoor/Outdoor

GG 25C905

EM SERIES EM8 VALVE, GEAR LUBE, 1/2in NPT

Graco 25C905 EM8 Electronic Manual Gear Lube Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT

EM Series handheld and in-line meters are designed to last - from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco's EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.

• Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
• High-Flow Rates - Capable of up to 8 gpm (30.3 lpm).
• Legacy Valve - 1/2 inch (13 mm) inlet, compatible with gear lube.
• Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
• Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.

• Model: EM8
• Series: A

• Approvals: CE

• Calibration Type: Factory Calibrated

• Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze

• Display Type: Electronic

• Extension Type: Rigid

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Extension
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• IP Rating: 69K

• Maximum Flow Rate (cc/min): 30283

• Maximum Flow Rate (cc/sec): 505
• Maximum Flow Rate (GPM): 8
• Maximum Flow Rate (L/min): 30.3

• Maximum Operating Temperature ( degree C): 82
• Maximum Operating Temperature ( degree F): 180

• Maximum Recorded Dispense: 19999

• Maximum Storage Temperature ( degree C): 85
• Maximum Storage Temperature ( degree F): 185

• Maximum Totalizer: 19999

• Maximum Working Pressure (bar): 102
• Maximum Working Pressure (kPa): 10200
• Maximum Working Pressure (MPa): 10.2
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Pressure Loss (bar): 2.1 Bar at 6 GPM
• Meter Pressure Loss (psi): 30 PSI at 6 GPM
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 1.36
• Metering Gun Weight (lb): 3

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Operating Temperature ( degree C): -30
• Minimum Operating Temperature ( degree F): -22

• Nozzle Type: Manual

• Outlet Size (cm): 1.905
• Outlet Size (in): 3/4
• Outlet Size (mm): 19.05
• Outlet Thread Type: ORB

• Overall Height (cm): 13.3
• Overall Height (in): 5.25
• Overall Height (mm): 133
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9
• Overall Width (in): 3.5
• Overall Width (mm): 90

• Recommended Environment: Indoor/Outdoor

GG 25C916

EM SERIES EM20 VALVE, RIGID EXT, 1/2in NPT

Graco 25C916 EM20 Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 1/2 in. (13 mm) Inlet - NPT

EM Series handheld and in-line meters are designed to last - from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco's EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.

• Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
• High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
• Legacy Valve - 1/2 inch (13 mm) inlet, compatible with oil and Antifreeze.
• Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
• Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.

• Model: EM20
• Series: A

• Approvals: CE

• Calibration Type: Factory Calibrated

• Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze

• Display Type: Electronic

• Extension Type: Rigid

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Extension
• Inlet Size (cm): 1.27
• Inlet Size (in): 1/2
• Inlet Size (mm): 12.7

• Inlet Thread Type: NPT

• IP Rating: 69K

• Maximum Flow Rate (cc/min): 75708

• Maximum Flow Rate (cc/sec): 1262
• Maximum Flow Rate (GPM): 20
• Maximum Flow Rate (L/min): 75.7

• Maximum Operating Temperature ( degree C): 82
• Maximum Operating Temperature ( degree F): 180

• Maximum Recorded Dispense: 19999

• Maximum Storage Temperature ( degree C): 85
• Maximum Storage Temperature ( degree F): 185

• Maximum Totalizer: 19999

• Maximum Working Pressure (bar): 102
• Maximum Working Pressure (kPa): 10200
• Maximum Working Pressure (MPa): 10.2
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Pressure Loss (bar): 5.9 Bar at 12 GPM
• Meter Pressure Loss (psi): 85 PSI at 12 GPM
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 1.39
• Metering Gun Weight (lb): 3.1

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Operating Temperature ( degree C): -30
• Minimum Operating Temperature ( degree F): -22

• Nozzle Type: Manual

• Outlet Size (cm): 2.2225
• Outlet Size (in): 7/8
• Outlet Size (mm): 22.225
• Outlet Thread Type: ORB

• Overall Height (cm): 13.3
• Overall Height (in): 5.25
• Overall Height (mm): 133
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9
• Overall Width (in): 3.5
• Overall Width (mm): 90

• Recommended Environment: Indoor/Outdoor

GG 25C919

EM SERIES EM20 VALVE, RIGID EXT, 3/4" NPT

Graco 25C919 EM20 Electronic Manual Oil/Antifreeze Meter - Rigid Extension - 3/4 in. (19 mm) Inlet - NPT

EM Series handheld and in-line meters are designed to last - from small service centers and lubrication trucks to heavy-duty repair facilities. Choose from 8 or 20 gpm (30.3 to 75.7 lpm) hand-held models or our 20 gpm (75.7 lpm) in-line meter. Graco's EM Series meters are backed by our robust warranty and feature upgraded electronics and easy-to-read LCD with simple operator controls that measures in quarts, gallons, pints and liters.

• Twist-Close Nozzle Prevents Leaking - Multiple extensions available including rigid, flexible and gear lube.
• High-Flow Rates - Capable of up to 20 gpm (75.7 lpm).
• Legacy Valve - 3/4 inch (19 mm) inlet, compatible with oil and Antifreeze.
• Proven in Harsh Conditions - Sealed electronics (IP69K) are protected against direct pressure washing and dust.
• Long Battery Life - Features upgraded electronics and easily replaceable AAA batteries.

• Model: EM20
• Series: A

• Approvals: CE

• Calibration Type: Factory Calibrated

• Compatible Material: Petroleum-Based Oil, Synthetic-Based Oil, Antifreeze

• Display Type: Electronic

• Extension Type: Rigid

• Fluid Inlet Thread Gender: Female

• Fluid Outlet Thread Gender: Female

• Includes: Nozzle, Extension
• Inlet Size (cm): 1.91
• Inlet Size (in): 3/4
• Inlet Size (mm): 19.05

• Inlet Thread Type: NPT

• IP Rating: 69K

• Maximum Flow Rate (cc/min): 75708

• Maximum Flow Rate (cc/sec): 1262
• Maximum Flow Rate (GPM): 20
• Maximum Flow Rate (L/min): 75.7

• Maximum Operating Temperature ( degree C): 82
• Maximum Operating Temperature ( degree F): 180

• Maximum Recorded Dispense: 19999

• Maximum Storage Temperature ( degree C): 85
• Maximum Storage Temperature ( degree F): 185

• Maximum Totalizer: 19999

• Maximum Working Pressure (bar): 102
• Maximum Working Pressure (kPa): 10200
• Maximum Working Pressure (MPa): 10.2
• Maximum Working Pressure (psi): 1500
• Meter Accuracy (%): plus/minus 00.5
• Meter Pressure Loss (bar): 5.9 Bar at 12 GPM
• Meter Pressure Loss (psi): 85 PSI at 12 GPM
• Meter Technology: Oval Gear

• Metering Gun Weight (kg): 1.39
• Metering Gun Weight (lb): 3.1

• Minimum Flow Rate (GPM): 0.25
• Minimum Flow Rate (L/min): 0.95

• Minimum Operating Temperature ( degree C): -30
• Minimum Operating Temperature ( degree F): -22

• Nozzle Type: Manual

• Outlet Size (cm): 2.2225
• Outlet Size (in): 7/8
• Outlet Size (mm): 22.225
• Outlet Thread Type: ORB

• Overall Height (cm): 13.3
• Overall Height (in): 5.25
• Overall Height (mm): 133
• Overall Length (cm): 33
• Overall Length (in): 13
• Overall Length (mm): 330
• Overall Width (cm): 9
• Overall Width (in): 3.5
• Overall Width (mm): 90

• Recommended Environment: Indoor/Outdoor

GG 25C977

KIT, 10 PACK, ELBOW, 3/16-1/8NPT

Graco 25C977 Electric Grease Jockey System Truck with Greaseable Spring Pins - 3/16 in. to 1/8 in. NPT Elbows, 10-Pack

• 3/16 in to 1/8 NPT elbows, 10-Pack (qty)

• Application: On-Road Vehicles

• Compatible Material: Grease

• Connection Type: Tube End, Threaded

• For Use With: Tube

• Material: Brass

GG 25C978

KIT, 10 PACK, 3/16-1/8NPT

Graco 25C978 Electric Grease Jockey System Truck with Greaseable Spring Pins - 3/16 in. to 1/8 in. NPT Straights, 10-Pack

• 3/16 in to 1/8 NPT straights, 10-Pack

• Application: On-Road Vehicles

• Compatible Material: Grease

• Connection Type: Tube End, Threaded

• For Use With: Tube

• Material: Brass

GG 25C979

KIT, ELBOW, 15K784, 5 PK

Graco 25C979 Electric Grease Jockey System Truck with Greaseable Spring Pins - 1/4-28 in. to 1/8 in. NPT Female, 5-Pack

• 1/4-28 SAE to 1/8 NPT (F), 5-Pack

• Application: On-Road Vehicles

• Compatible Material: Grease

• Connection Type: Threaded

• Finish/Coating: Zinc

• For Use With: Pipe

• Material: Steel

GG 25C983

KIT, DOUBLING, OUTPUT

Graco 25C983 Electric Grease Jockey Pump Output Doubling Kit

• Output doubling kit

• Model: Grease Jockey

GG 25D011

GG 25D136

GG 25D135

GG 25D137

GG 25D138

GG 25D143

GG 25D145

GG 25D234

GG 25D235

GG 25D236

GG 25D237

GG 25D238

GG 25D244

GG 25D245

GG 25D246

GG 25D248

GG 25D259

GG 25D260

GG 25D262

GG 25D295

KIT, COMPLETE, CS T3, AIR/FLUID

Graco 25D295 T3 Complete Package: Includes 2 Pumps (Carbon Steel), 2 Supply Hoses, Air Supply Kit and Desicant Dryer Kit

Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco's proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump - using less air pressure to provide the same fluid pressure required.

• Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.
• More quiet - Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.
• Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching

  is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical

  reversing mechanism in the air-motor

• Model: T3
• Series: Carbon Steel

• Air Inlet Size (in): 1/4
• Air Inlet Size (mm): 6.35
• Air Inlet Thread Gender: Female
• Air Inlet Thread Type: NPT

• Application: Industrial

• Compatible Material: Polyurethane Foam, Polyurea

• Cycles Per Gallon: 30

• Fluid Outlet Size (in): 3/4
• Fluid Outlet Size (mm): 19.05
• Fluid Outlet Thread Gender: Female
• Fluid Outlet Thread Type: NPT

• Includes: Fluid Supply Kit, Air Hose Kit

• Material: Carbon Steel

• Maximum Air Inlet Pressure (bar): 6.9
• Maximum Air Inlet Pressure (kPa): 690
• Maximum Air Inlet Pressure (MPa): 0.69
• Maximum Air Inlet Pressure (psi): 100

• Maximum Flow Rate (GPM): 4.5
• Maximum Flow Rate (L/min): 17.03

• Maximum Operating Temperature ( degree C): 88
• Maximum Operating Temperature ( degree F): 190

• Maximum Working Pressure (bar): 21.7
• Maximum Working Pressure (kPa): 2170
• Maximum Working Pressure (MPa): 2.2
• Maximum Working Pressure (psi): 315

• Package Options: Air Supply & Supply Hose

• Pump Ratio: 3:1

GG 25D296

KIT, SUPPLY, CS T3, /W PLUMBING

Graco 25D296 T3 Package: Includes 2 Pumps (Carbon Steel) and 2 Supply Hoses

Transfer Pumps are required to move A and B materials to the Reactor Spray Systems. The T3 Transfer Pump combines Graco's proven Merkur air-motor and popular T2 stainless steel lower. The T3 is a 3:1 ratio pump - using less air pressure to provide the same fluid pressure required.

• Easier to maneuver - The overall height of the T3 is 3.7 inches (9.4 cm) shorter above the drum than the T2, making it easier to remove from the drum inside of a spray rig.
• More quiet - Studies show the T3 Transfer Pump is about 3x more quiet than the T2 Transfer Pump.
• Less maintenance - the Merkur air-motor is based on air pilot valve technology. The air-motor switching is purely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air-motor

• Model: T3
• Series: Carbon Steel

• Material: Carbon Steel

• Package Options: Supply Hose

GG 25D312

GG 25D458

GG 25D460

GG 25D477

GG 25D482

KIT,14 VALVE CC CONTROL

Graco 25D482 14 Valve Color Change Solenoid Module Kit

GG 25D483

KIT,15 VALVE CC CONTROL

Graco 25D483 15 Valve Color Change Solenoid Module Kit

GG 25D486

KIT, 18 VALVE CC CONTROL

Graco 25D486 18 Valve Color Change Solenoid Module Kit

GG 25D511

GG 25D340

LINELAZER SPRAYER, V, 250SPS, 2 GUN, 2PBS, LSR

Graco 25D340 LineLazer V 250SPS HP Reflective Series Self-Propelled Gas Hydraulic Airless Line Striper, 2 Auto Guns, 2 Tanks, LazerGuide 3000

With exclusive automatic paint guns and hydraulic power, the LineLazer V 250SPS HP Reflective Series is a self-propelled system with reflective bead capability designed for large, heavy-duty line striping jobs including parking lots and road jobs.

• Pressurized EZ Bead System
  • Superior Bead Application Performance
  • Ensures proper bead flow and paint penetration
  • Dual bead tanks hold up to 120 lbs each
• Automatic Paint Gun System
  • Automatically Stripe Skip-Lines
  • Reduce operator fatigue - push button line production
  • Quality solenoid driven system
• LazerGuide 3000 Long-Line Lazer
  • Easier, laser-straight lines
  • Longer distance accuracy
  • Highly-visible laser guise
  • Faster, simple operation
• 25-Gallon Paint Hopper
  • Less Refilling
  • Extended striping time with large capacity hopper
• Honda GX Engine
  • Reliable, Easy-to-Start Power
  • Contractor-preferred - excellent power and proven reliability
  • Oil Alert shuts down engine to prevent damage if oil level drops too low
• Electric Start
  • Fast starting
• EasyMark Gun Adjustment System
  • Easy Gun Adjustments
  • Perfect gun alignment every time with easy-to-use guide mark system
  • 2-gun capability with QuikSelect gun selector
• Front or Rear Gun Mount
  • Straighter long lines
  • Use up to six guns
• Additional Features
  • Self-Centering Front Wheel
  • Easy Handlebar Adjustment
  • Endurance Chromex Pump
  • High-Efficiency Hydraulic Motor
  • High-Capacity Cooling System
  • Easy Out Pump Filter

• Model: LineLazer V
• Series: 250SPS
• Product Series: HP Reflective

• Attachments: LazerGuide 3000

• Bead System: Pressurized Bead System
• Bead Tank Size (lb): 240

• Compatible Material: Road-Marking Paint
• Compatible Surfaces: Pavement, Turf

• Engine Brand: Honda
• Engine Model: GX390

• Features: SmartControl

• Fuel Tank Capacity (gal): 1.4
• Fuel Tank Capacity (L): 5.3

• Gun Activation: 2 Automatic

• Hopper Volume Capacity (gal): 25
• Hopper Volume Capacity (L): 95

• Includes: LazerGuide 3000, Pressurized Bead System (2 Tanks), Flex Plus Gun (2), LineLazer RAC 5 321 Spray Tip (2), LineLazer RAC 5 425 Spray Tip (2), LineLazer RAC 5 627 Spray Tip (2), RAC 5 Tip Guard (2), 3/8 in x 12 ft (3.7 m) BlueMax II Airless Hose, 3/8 in x 3 ft (0.9 m) BlueMax II Airless Whip Hose, TSL 4 oz (118 mL)

• Maximum Flow Rate (GPM): 2.5
• Maximum Flow Rate (L/min): 9.46

• Maximum Tip Size (cm): 0.1397
• Maximum Tip Size (in): 0.055
• Maximum Tip Size (mm): 1.397

• Maximum Working Pressure (bar): 227
• Maximum Working Pressure (kPa): 2270
• Maximum Working Pressure (psi): 3300

• Number of Colors: One Color

• Number of Guns: 2
• Number of Hoppers: 1
• Number of Pumps: 1

• Power Rating (HP): 13

GG 25D433

GG 25D480

KIT,12 VALVE CC CONTROL

Graco 25D480 12 Valve Color Change Solenoid Module Kit

GG 25E493

GG 25E470

GG 25D934

GG 25D515

GG 25E299

GG 25D605

KIT, PD2K REMOTE MAN, DVM HP

Graco 25D605 ProMix PD2K High Pressure Remote Manifold Custom Valve Mapping Kit

To add optional color change function and at-the-gun mixing of two component materials when used with a ProMix PD Proportioner for Automatic Spray Applications.

• Model: ProMix
• Series: PD2K

GG 25D846